Windows 7 No Longer Boots?
Dec 9, 2011
So just a few minutes ago my desktop was running fine and all. I was opening and reading documents off my flash drive when all of a sudden it turned off and proceeded to restart. Upon passing the POST screen, it comes to an error page that says boot device not found. Just FYI I have a WD 250GB boot drive and two additional Samsung 1TB drives set up in RAID 1 NTFS. So I look in BIOS for my boot drive and find it there and it says its working. However, when I try to set the WD boot drive as the first boot device, it does not show it as an option at all. Only my raid drive shows up along with removable drive, and cd drive.I need some ideas as to what could have caused this. The WD drive is a few years old, but I don't think the drive would have just died like that; there were no previous cues for the hard drive starting to fail. It still shows up in BIOS and powers up.I wanna hope that the MBR was somehow corrupted, which should be an easy repair I think if I can get my hands on the ISO file. Also, it's Windows 7 Ultimate 64 bit
View 4 Replies
ADVERTISEMENT
Aug 30, 2011
After restoring an image made with Clonezilla that used to work, Windows 7 is unable to start. When prompted, I used the DVD, but it still fails with "Startup Repair could not detect a problem".When rebooting, it says "Windows Error Recovery: Launch Startup Repair (recommended) and Start Windows Normally": Launch Startup Repair fails with "Windows Boot Manager: 0xc000000e The Boot selection failed because a required device is inaccessible".FWIW, to investigate, I deleted both partitions (#1 to hold the OS, #2 to hold images) and re-created them with enough space to hold (#1 was made a bit bigger because I didn't know how to specify infos in cfdisk accurately), and Clonezilla happily restored the image.
View 6 Replies
View Related
Jul 5, 2011
I successfully installed Windows 7 64bit in AHCI mode on a PC with 3 new 3TB Western Digital WD30EZRX Caviar Green hard drives.Then I installed "Intel Matrix Storage Manager Driver [v8.9.0.1023]" & as soon as Windows restarted after installing it, Windows would not boot, & will now only boot in IDE mode.In IDE mode I have to do a system restore to the point before installation of "Intel Matrix Storage Manager Driver" to be able to boot again in AHCI mode.
View 1 Replies
View Related
Nov 1, 2009
I did have the following setup, on a single drive, two partitions:
345GB: Windows XP (installed first)
120GB: Windows 7
I've made a slight mistake – I've deleted the partition which hosted the MBR for my dual boot setup.
Basically, I have a single hard drive split into two partitions. I thought that I was thoroughly satisfied with Windows 7, so I decided to delete the partition which XP was sitting on. Little did I realise/remember at the time, but the XP partition held all the boot information, thus rendering my newly formed single partition unbootable. I booted GParted to ensure that my partition was intact, and it showed the following:
/dev/sda1 Extended 465GB LBA
/dev/sda5 NTFS 465GB Boot
(I manually flagged /dev/sda5 as 'boot')
This all appeared normal to me, so I put my Windows 7 disc in and attempted the various repair options. In my experience (with XP), FIXMBR from the command prompt usually fixes the issue, in this situation it hasn't. I've also tried 'BootRec.exe /fixmbr' & 'BootRec.exe /fixboot'. None of which seem to work.
My last attempt at fixing this was using the 'Startup repair' option on the Windows 7 disc. This hasn't worked either.
Can someone perhaps kindly offer me a solution? I'd rather not reinstall Windows.
View 4 Replies
View Related
Dec 12, 2012
I had a stock machine running windows 7. I built a computer for myself and I hardly use cds so when I needed to install windows 7 on the new computer I simply removed my cd drive from my old computer and put it in the new one. I assumed that since the os is installed to the hd that the computer would still run but it does not . I already installed windows 7 on the new computer but when I went to boot my old pc up it says no operating system. Do I just need to buy a new cd drive? Or do I need to buy another copy of windows?
View 5 Replies
View Related
Jan 17, 2013
I just upgraded my cpu,mobo,ram and HDD recently and I am having some issues. I have the Phenom ll 3.2ghz 1090T amd cpu with the ASRock 970 Extreme 3 mobo with 2x4gb Corsair Vengeance ram. My problem is that when I try to use my ram, my pc freezes on the Starting windows screen while the bubbles are coming together to make the microsoft logo. I am using my old ram that is a 2gb 1333 ram. I have another stick of the same ram but I am unable to use that as well. My OS has all its updates and I am completely stuck right now and a lil frustrated. I have consulted many people and nothing has worked.
View 9 Replies
View Related
Jun 29, 2012
I have had a strange problem.Windows 7 only boots up every other boot. In between the computer hangs at the Advent screen.I have been into MSconfig and in start up disabled all and in Services, again disabled all and hidden Microsoft.It now starts up ok but will I have caused other issues by disabling all and hiding Microsoft?
View 8 Replies
View Related
Jul 22, 2012
Turn my labtop and get thisFor atheros pcie Ethernet controller v2.0.1.9(12/15/09),Don't know if I need a windows7 boot up disc. I tryed useing a repair disc I made of my friends windows7 labtop to fix but it didn't work.
View 1 Replies
View Related
Jan 21, 2013
I built a new pc with AMD fx8150 with ASUS M5A97R 2.0 .I had never seen such a bios before with so many complications so loaded bios default and installed OS Win 7 Ultimate x64. (Bios showed 2 DVD drives in boot selection menu when i have only one).I completed the installation and when rebooted the windows returned with error "disk read error occurred-press ctrl+Alt+del to restart) and this continues for 3-4 times and suddenly 5th attempt will boot my windows.sometimes it will only boot after i enter the BIOS>Boot Menu>Boot Priority and select BOOT OVERRIDE option.
View 9 Replies
View Related
Jan 15, 2013
My windows 7 ultimate x64 was running perfectly well and fast until my Powercool 80 plus 7500W PSU burst (died) i then got a replacement Crosair CX600 600W. I installed the new PSU then power up my PC, It is then when i discovered it takes forever Windows to boot up, and mostly it does not boot up at all.I am suspecting some sort of Hardware damage caused by PSU burst.Checked my RAM on different PC works fine.Checked my Graphic Card on different PC works fine.
View 5 Replies
View Related
Feb 19, 2012
When I installed windows I had both my ssd and my hard drive plugged in, but when it wanted me to select a drive to boot to I highlighted the ssd and clicked next.It installed windows on it and all is good. But then when I went to change some stuff in the bios, I noticed it had my 1tb hard drive as the boot device. Windows is installed to the sdd so I was really confused by this. I tried making the ssd the first boot device but it didn't work, so I just changed it back to my hard drive for now, but I would like to know what's going on. Looking in the windows partition manager right now it does say my ssd is the boot drive. But my hdd does have a system reserved partition on it that's listed as system and active, my ssd is listed as boot and crash dump. Here's a picture of what I'm talking about.
View 7 Replies
View Related
May 23, 2012
I just turned on my computer and it booted but I can't click anything, not even right click. The keyboard seems to work, and in Safe Mode everything is fine, too. The Computer is only a week old so I'm kinda pissed off.
View 3 Replies
View Related
Oct 15, 2012
my sustem windows 7 freezes after it boots
View 1 Replies
View Related
Oct 18, 2011
Windows 7 will not boot into NORMAL mode. It will only boot into SAFE mode.This Windows does not provide the option: Boot into last good configuration....It only offers: SAFE SAFE with Networking normal In Safe Mode, I can not get Windows to react to a hard network connection.I don't know how to get out of the SAFE mode loop and force Windows back into NORMAL mode.
View 3 Replies
View Related
Dec 6, 2011
I use Windows 7 Pro on my Sony VAIO Laptop and I have noticed in the last few weeks that it has became slower and slower so I did the defrag, virus check, disk clean up, windows tweaks and tips un-checked most of the start-up programs and it did make the computer faster except for the boot and shut down and the average time is around 3 minutes for both, so what else can I do before I decide to reformat and set it back to factory settings
View 2 Replies
View Related
Oct 17, 2012
Windows will only boot into startup repair no matter what. The issue is startup repair was unable to fix the problem. [code]
View 3 Replies
View Related
Nov 17, 2011
I am using windows 7 home basic service pack 1.I had changed the color when windows 7 loads to white color that is after i enter the password when windows is booting i had changed the color to white now i want it to be restored to black but i have forgotten how to do it if any one knows how to do it that will be great.
View 9 Replies
View Related
Dec 27, 2012
I've checked the bios, task scheduler, power settings. I can'y figure out why it is booting up every day at 3am. I can replicate by changing the clock to just befor 3am and then shutdown.
View 9 Replies
View Related
Jul 4, 2012
I built a computer, and I am using a Coreâ„¢ i5-3570K Processor w/ Gigabyte GA-Z77-D3H Motherboard, and I am using the stock CPU Fan (that comes with the Processor), I noticed that the CPU Fan only spins when the computer is booting, then stops spinning when it has finished booting (when windows has fully loaded). When I go into my BIOS Settings, the CPU Fan still spins. But when it boots Windows, it suddenly stops. I have tried unplugging my CPU Fan from the motherboard and plugging it in again, but that doesn't seem to fix it. It is in the correct socket.
View 9 Replies
View Related
Jun 6, 2011
rite i've managed to make a pig's ear of my boot. my windows still boots ine.....butmy boot menu is blank in msconfig boot tabis blankeasyBCD cant see any boot info and asks me for it, it wont write any boot info.bcdedit constantly says the store import operation has failethe device is not ready"in repair also when i try to do anything i.e. importbootrec.exe in repair also doesnt recover it.what im trying to do is have a boot menu, where i have the option for win 7 then a pen drive with a linux disto on it then also CDrom as i normally chop and change between all them 3 onthis pc and im sick of going in the bios 4 times a day to change these options.
View 4 Replies
View Related
Nov 29, 2011
I have 2 HDD, Disk0 and Disk1. Disk0 is supposed to have my personal data, Disk1 the OS. Disk0 has 3 partitions (H:/ I:/ J:/ ) and Disk1 has 3 partitions too (C:/ D:/ E:/ ).One month ago I installed Windows 7 but erased my Disk0 by mistake and probably (very unlikely though! see below) started installing on there when I realized something looked wrong, canceled, then formatted Disk1 and installed there, on the first partition (I blame the badly designed Windows installer, Linux does it better).Fortunately, I recovered my data from Disk0 (only partition tables must have got wiped out) after Windows 7 finished installing on Disk1 with a recovery tool.I'm about to format Disk0 now (at least the first partition) but I noticed something weird on my Disk0 (data) hard drive.I have system files, of which creation dates match the day I installed Windows 7 (and recovered my partitions too). Note: disregard found.000, that's a file chkdsk must have created back when I used WinXP or something.Note2: columns are "Date modified" and "Date Created", YY/MM/DD I'm new to Windows 7 but I'm guessing these system files I see here should be on my System drive, not another drive, right?Here is what I have on my C:/ where Windows 7 is installed:In such a case, will I have to either:
1) format C:/ and re-install Windows 7 ?
2) use recovery console and repair from there ?
why one drive (SATA) is Disk1 and the other (IDE) is Disk0. I had to fiddle in my BIOS to end up booting on the right one (which I suspect is Disk0!). If I ever had to remove my IDE HDD, would I end up not being able to boot Windows 7?Remark: I got suspicious of that when trying to encrypt my system drive with TrueCrypt and TC says it couldn't handle a system that "does not appear to be installed on the drive from which it boots".
[code]....
View 9 Replies
View Related
Aug 23, 2011
I have bought the Dell XPS 15 laptop. It has Win 7 x64 OS, i7 & 4GB RAM
Earlier, it use to boot slowly in 2 minutes, with loading almost 1700MB in memory. I now stopped manny startup processes & services, but still the boot up loads 1200MB of RAM.
I also have desktop with Win 7 x32 OS, Core 2 Duo, 2 GB RAM It boots prety quickly with loading only about 600-700 MB in RAM.
So whats wrong with my laptop? What processes are still eating up the memory. Can I reduce this 1200 MB to below 800-900MB
View 9 Replies
View Related
Feb 15, 2012
When my system is working, it will occasionally just shut off. No BSOD, no error screen of any sort, just a clean power off. It happens anywhere from twice a day to once every two weeks. My system specs are located below.
When my system is not working, I can't even get Windows 7 to load. It boots, I get the option to repair (which, only the first time, will say it reverted back to a time when everything was working fine) or start normally. If I choose to repair, it restarts, then goes into the infinite loop. It restarts, if I choose repair, it says windows cannot fix the problem, and shuts down. If I choose start normally, it shows the windows loading graphics, but then I get the clean shut down right before I get to the log-in screen (don't actually ever see it).
How does it go from the first scenario to the second scenario? Well, I think its Microsoft Office. Every time I try to install it (sometimes successfully), I eventually start to have these start-up problems. But I can't be certain, I just downloaded a fresh install file today to make sure it wasn't my DVD. There are so many more details that may or may not be important, but I'll spare them for the time being.
This is a home-built computer. It should be noted that I've had this problem mostly through the life of this system (15 months), and have replaced the power supply, the RAM, and the SSD that the OS is installed on.
P55A-UD4P Motherboard
Intel i7 870 CPU
16GB Kingston 1600 RAM
OCZ Agility3 120GB USB 3.0 SSD
OCZ Agility2 60GB USB 2.0 SSD (Used for my Star Wars install)
Nvidia GeForce GTX 460 1GB
Corsair GS700 PSU
Windows 7 Home Premium
Microsoft Office 2010 Professional
I realize the shut downs sounds like a overheating issue. I wish I could go check the temperatures to let you know what it idles at, but my computer won't turn on. However, I play Star Wars: TOR at max settings and have never had a shut-down happen during that time.
I know this is a shot in the dark, but I don't know enough to narrow the problem down. It honestly makes me want to go buy a pre-built because I feel like the problem is my choice of components or some type of incompatibility.
View 3 Replies
View Related
May 18, 2012
I just purchased a new motherboard, processor, RAM, and power supply for my Desktop. I have been trying to boot the computer using my hard drive from my old setup which had Windows 7 on it. Whenever the computer boots it goes from the bios screen to the Windows Boot page with the logo but then it goes straight to a Blue Screen. When the Blue Screen comes up it only flashes for a tenth of a second and then restarts so I can not read it. The same thing happens when I try to boot the computer in safe mode.
View 3 Replies
View Related
Jun 18, 2012
My PC only boots in safe mode. It works fine in safe mode. Otherwise , it stops at starting windows and does nothing else. I've backed up all data in safe mode. Now I want to delete everything and install a new version of windows 7. But when I try to install it (from usb) it freezes at starting windows also (it loads from usb). How can I delete my hard drive? (I don't have the thing to connect it to another computer)
View 2 Replies
View Related
Jan 15, 2013
Windows 7-32 only boots up to safe mode after installing Avast software? Tech support for Avast wanted $100.00 to fix and I only paid $20 for the Software?
View 4 Replies
View Related
May 28, 2012
I recently formatted my main drive (upgrading from Vista to Win. 7), and it worked perfectly.It asked to install some updates, including my graphics card and everything else.Then it restarted, and updated a few registry settings ( I think somewhere around 5600-56000, alot more than a few lol), and it black screened when it came to the login screen. I tried logging in, and I could hear the sounds and everything else, so I think it's the graphics card that's the problem.I tried booting into safe mode and uninstalling/reinstalling the graphics driver, but it still black screened.I checked almost every other topic about this, and I tried everything but it didn't work, but i'm still open to more common suggestions.
Right now, i'm just running on the on-board graphics in normal boot mode.System Specs:OS Version: Microsoft Windows 7 Home Premium, 64 bitProcessor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 7Processor Count: 4RAM: 6078 MbGraphics Card: NVIDIA GeForce GT 120, 1024 MbHard Drives: C: Total - 280139 MB, Free - 253850 MB; D: Total - 420255 MB, Free - 420153 MB;Motherboard: Acer, EG45MAntivirus: None, I will be adding Kaspersky later.
View 1 Replies
View Related
Jul 22, 2012
Additional info: Running Windows 7 64 bit Home Premium 1.7GHz, 8 GB RAM laptop I just did a clean re-install of Windows 7 64 bit Home Premium on my laptop. Everything seems to be working okay, except now I feel that it's taking longer than before to start up Windows. The windows orb would appear, it will goes blank (for a minute or 2), after that then it loads my desktop screen. Does that seems like a normal boot up time for Windows 7? I do not know the exact boot up time as of now, but I will try to time it down so I'd know how long exactly it takes to boot up Windows 7.
View 14 Replies
View Related
Jun 12, 2010
I tried to install with my graphics card ATI ASUS EAH4350, but I couldn't install win 7. It stopped when "starting for first use" message. But I found solution to install Windows 7 in vga mode and it worked. Then again I put my graphics card and started win 7. It automatically installed vga driver and asked me to restart before I install ati catalyst driver from cd. After restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer. It only starts in vga mode or safe mode. By the way I have win xp as well in c drive nad installed win 7 in h drive.
View 3 Replies
View Related
Jul 17, 2012
Basically I woke up this morning to my computer sitting at a black screen with the cursor visible I'm able to move the cursor but do nothing else I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check:[URL]from there it moves back to the black screen with the cursor I again restarted and booted in safe mode this time I was then able to reach windows and tried to do a system restore to an earlier point When i did this i was greeted with this error [URL]Finally here is my harddrive just in case [URL]I exported my full system info so please let me know if more info is necessary
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
[code]....
View 8 Replies
View Related
Aug 25, 2012
I am using w7 ultimate with a GT 9600 Nvidia GPU, connected to a samsung 22" wide screen via a HDMI cable, when I boot up the OS loads the startup screen in the old Vista format instead of the new W7 screen. It appears that my issue is the initial low resolution output via the HDMI cable. I have tried a DVI cable onto anther screen and the issue is not present as the new 3 ball bootup screen appears. Is there any way that I can tell the OS and or the GPU to start up immediately in a higher resolution which will enable the W7 newer boot screen.
View 9 Replies
View Related
