My main HD won't work on my main computer, it has "error 15 file not found". It works in my old computer and boots fine.It appears the problem is caused by an old install of linux onto that drive. The accepted solution is to use the repair on the install disk and type into console bootrec.exe /FixMbr. It said it was successful but i'm still getting the same error. It then goes to a big red screen with grub command.
View 1 Replies
When I try to install, I get an error in the beginning after the initial web update, every single time...
It says something about not having all the files available for installation? How is that possilible if I can succesfully install it on my other system? Any help is GREATLY appreciated.
I am also installing the CD on an external DVD/RW drive, since this old PC does not have a DVD drive installed. It also does not support USB 2.0. (1.0 only)
By the way, Windows 7 on my laptop has been running great! But my PC used to run 100 times faster with Windows XP. Is there any way I can get my PC running with Windows 7 just like my laptop, and even faster like before?
As title says, my wifi works fine on my laptop but won't work on my computer. This hasn't been an issue previously but I moved house and now can't get on. I've tried two different dongles, changing the channel my router goes on and a new router. The computer connects and says it has internet access but then whenever I try and load a webpage it just keeps loading and never actually brings up the page. Also tried a few ipconfig (flushdns, release and renew) through cmd as I was instructed to by a friend - but now can't think of anything else. Also, it has three out of 5 bars of strength but sometimes when I switch the computer on it doesn't even detect the network at all.
View 14 Replies View RelatedI have Windows 7, fairly new computer. I was typing on word and the computer just froze up. The mouse moves, but nothing responds when I click. I restarted, started in safe mode, still no response. The keyboard works, I can go up and down with the arrows and tab, and enter, and I can type things in a search box in the safe mode
View 1 Replies View RelatedAll of a sudden, from just turning it on today, my laptop (a dell inspiron) now only works in what it calls 'safe mode'. This has literally just started, and no amount of turning it off and on again has fixed the problem. When I turn it on it loads up to the windows welcome screen, but instead of loading my desktop the screen goes completely black, sometimes with the mouse still on screen that I can move around. When I force it to shutdown, something in it bleeps loudly. (Note: I don't know if this might be related, but I've been having problems with my screen for a while now where it goes all pink and green, I know this is the wire between the screen and whatever it plugs into being loose, I just haven't gotten it fixed yet, but it's never done this and gone all black before.)
View 2 Replies View Relatedmy SD Card (32gb) works in camera but not in computer
View 2 Replies View RelatedMy computer does not go past the "starting windows" logo on my computer. When it does the cursor just stays there loading. On top of that im not even able to do a system restore because of some type of error. Everything works fine on Safe Mode, and I really dont think its a virus.
View 4 Replies View RelatedMy computer freezes and only works in safe mode.
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4094 Mb
Graphics Card: NVIDIA GeForce GT 220, 1024 Mb
Hard Drives: C: Total - 702610 MB, Free - 547651 MB; D: Total - 12690 MB, Free - 2255 MB;
Motherboard: MSI, Boston
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
My computer keeps freezing seconds after it logs in. I am not sure what to do and would like some help please. I also ran hijack this and got this result.
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:08:09 PM, on 7/16/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16447)
Boot mode: Safe mode with network support
[code]....
computer freezes after startup, safe mode works? Moved to Virus & Other Malware
View 2 Replies View RelatedI have windows seven RC1(32 bit) and I get a BSOD when my computer works hard for longer periods of time. I do not have this problem with my vista partition. For example if I do a 30 mins skype call or play a game for 20 mins I get the BSOD. However I can surf the internet and listen to podcast for hours and have no problems.
Heres the error message
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7100.2.0.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:27
BCP1:BAAD0073
BCP2:807A1B94
BCP3:807A1770
BCP4:923A540C
OS Version:6_1_7100
Service Pack:0_0
Product:256_1
http://dl.getdropbox.com/u/643924/WE...-0.sysdata.xml
http://dl.getdropbox.com/u/643924/051609-28033-01.dmp
My PC Specs are:
Phenom 9600
4 Gb Ram
Gigabyte MA770-UD3
9600 Nvidia Geforce
Let me know if you need anything else.
My computer does not go past the "starting windows" logo on my computer. When it does the cursor just stays there loading. On top of that im not even able to do a system restore because of some type of error. Everything works fine on Safe Mode, and I really dont think its a virus.
View 3 Replies View RelatedI am writing this while my computer is in safe mode. After I click on an account when I boot normally, it will freezes a few moments later on the desktop. [code]
View 14 Replies View RelatedI am writing this while my computer is in safe mode. After I click on an account when I boot normally, it will freezes a few moments later on the desktop.I have an HP DV8 that is about three years old. Here are the specs:
i7 Q720 @ 1.60 Ghz
4GB Ram
I've tried doing the boot repair by pressing F8 during startup and it said everything was working perfectly fine.I also tried going to previous restore points and it still froze.I did a scan using hijack this and here is the results:
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 6:49:58 PM, on 1/3/2013
Platform: Windows 7 (WinNT 6.00.3504)
MSIE: Internet Explorer v9.00 (9.00.8112.16457)
Boot mode: Safe mode with network support
[code].....
Yesterday when I got home I could not get my headset working on my PC. It's a USB headset (Tritton AX720) but it works perfectly on my Xbox 360. There is sound coming from the headset but it is really quiet. My speakers to my computer work fine, it's just when I plug the headset in I'm not getting sound. I was working on it for about an hour last night and I can't figure out what is wrong with it. So far I've tried to make it my default audio device, I did a system restore to a few days ago, and messed with the setting a little bit. This headset has worked on my PC for about 6-8 months up until yesterday. By the way my audio for my computer is still working perfectly. It is only when I plug my headset in that it isn't working properly. I'm completely lost on what is wrong.
View 1 Replies View RelatedDuring installation using 64 bit dvd it says the product key isn't valid, but it works fine on 32 bit dvd.
Any ideas?
I did a very stupid thing and now need assistance. I have redirect malware or something on my machine.A search on the topic, talked about using ComboFix as part of a solution. I downloaded it, installed it and it started running immediately, before I could do anything else.I know that was not wise.Now trying to start anything results in "Illegal operation on a registry key that has been marked for deletion."
System is Windows 7 Professional.
All of a sudden the Up & Down Arrow Keys, the Page Up & Page Down Keys, the Home & End Keys no longer work properly. Whenever I click on any of them nothing happens or I am taken to the very bottom of the page. The only way I can move up & down the page is to use the Scroll Bar.
View 2 Replies View RelatedThe last few times I have restarted my windows 7 PC everything goes according to how it should, the desktop appears in under two minutes but nothing will work. I can click on any icon and nothing happens then after about 20 minutes evey programme I clicked on earlier will open one after the other. after closing these progs the comp performs normally, I noticed that even Ctrl alt and delete does nothing during this period of disobedience, anyone had this before? It's a hi-spec machine with 4 gigs of mem
View 4 Replies View RelatedI followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again. Oh my Bios is set up correctly in case any one asks.
View 2 Replies View RelatedI went on vacation for 4 weeks after returning, I plugged my pc back in and try to start it. After booting it shows me ''Starting Windows'' and reboots so I tried starting safe mode but that showed me a black screen and did nothing. I also tried Reinstalling Windows but the same thing happens It loads the files and then black screen nothing works. So I decided to use another hard drive but it also didn't work the same thing happens.My pc is an Alienware Aurora R2 with Windows 7 Home Premium 64 bit Not really sure what my specs are but my videecard is an HD Radeon 5670 I have a seagate hd 500gb My processor is an i3 not sure what sort but a dual core 3,02 Ghz and I have 3gb ram the motherboard is made for Alienware not sure what it's called.
View 2 Replies View RelatedI'd like to know what is "bitcoin" and how it works...
View 8 Replies View RelatedI'm having some trouble with media center, and actually also other video players..
I've been trying for some time to get media center running, but I keep having trouble with the codecs.
I'm running win 7 build 7100. First I installed ffdshow and used the MCDU to get media center to use ffdshow, and it worked. But then suddenly out of nothing about a week ago it didn't work anymore. When I tried to play a video-file I got the decoder error from media center telling me th-at the codec isn't working or isn't installed. It's all types of video files, avi, video_TS and so on. I then tried to uninstall ffdshow and install it again, but it didn't help. I then tried to uninstall again and install a different codec-pack. Didn't help. I have tried to install many different codec-packs but nothing helps.
Then I tried to play the video files using other media players. When playing video files in VLC the picture is kind of pixellated, doesn't look good at all (it's like watching the picture of Ripley's daughter as an old woman in Aliens if you remember).
I can't find a solution to this problem as I don't know what is wrong.
I replaced an XP laptop with a Windows 7 machine. When I VPN into our 10 network I can't get to any 192.168.5 addresses. The XP machine works fine and I have used it this way for 6 years, only the Windows 7 doesn't. I looked at a lot of settings but I can't find anything out of sorts. Any clues? My ipconfig ip is whatever my local router is ex 192.168.1.x and my local connection 2 is a 10 network address.
View 3 Replies View RelatedFor years I've had an internet provider that required me to use certain IP addresses, assigned to me by that provider. It worked perfectly fine all the time.Now, for several reasons, I have a new provider. This one requires auto detection for the IP address (or whatever it is called in English, "Automatisch beziehen" in German). And now I often have connection problems on the PC in my study, which is connected via router. Then I can't access the internet. Windows shows me my usual connection which is called Network 2 and tells me it has no connection, and it also shows me a new Unidentified Network which it obviously created by itself which also has no connection.Unplugging and re-plugging the network cable doesn't help; Windows does a new network scan then but the problems remain. I have to re-boot, sometimes even two or three times, and then all of a sudden the Unidentified Network is gone and my regular Network 2 is working again.
View 5 Replies View RelatedI followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again.Oh my Bios is set up correctly in case any one asks.
View 9 Replies View RelatedMy HDMI abilities are only enabled when my TV is powered off, which makes no sense at all. How can I get it to work?
View 3 Replies View Relatedi cant find one thats works
View 8 Replies View Relatedkeyboard shift key ain't woking properly when i press and hold it first letter is normal and second and further ones are capitalized (e.g. fFFFFFFFFFF) the right shift is working properly. Since its laptop i cant change it
View 2 Replies View RelatedIE9 would crash if I opened it in regular mode. I tried resetting it but it was still fucked. I uninstalled IE9 and went back to IE8 but it does the same thing. It works perfectly fine in no add-ons mode. Ran HJT to remove all BHO's and possible add-ons causing problems. I don't believe the computer has a virus anymore. I've ran MBAM, Combofix, Hitman Pro, Kaspersky, TDSSKiller amongst other ***. Oh AND it works fine in safe mode. Tried clean boot in regular mode, still didn't work. Created a new user account on PC, still didn't work. Ran check disk. Ran SFC. Reinstalled IE9. Manually removed all add-ons via registry editor.
View 6 Replies View Relatedi just bought dirt cheap Nec PCI card to USB 2.0 5-ports. and i cannot get it work at all i googled and there is no single prove it could work for win7 64 bit.so, which pci card to usb that actually works for Windows 7 64 bit?
View 1 Replies View Related
