Im using windows 7 OS, I have 2 different Hard Disk 1 is for OS 40 gig and 2nd 80gig is for my files, problem is the second HDD have a partition of 11gig and 69gig, i use it previously for my XP OS.. now im trying to re size my partion in 2nd hdd im trying to make 11gig into like 25gig up.. and this is what ive done.. i partition my 69gig to 20-49 and i try to delete 30gig so that i can merge 11 gig and 20 gig..when i delete the 20gig it become free space. and when i try to merge 11 and 20gig i cant their is no function of extend in 11gig partition, and then when i try to make new simple volume in that 20gig i deleted it shows an error of "Their is not enough space on the disk to perform this operation"..
I have been messing around with Ubuntu and other OS's and after I installed Ubuntu on a 5gb partition, I realized that is way too small, so I went into Windows, opened up Disk Management (diskmgmt.msc) and just deleted the volume. Well now I have a green partition and when I try to delete the partition, I get the error "There is not enough space available on the disk(s) to complete this operation" I am doing this all on my internal hard dive in my laptop.
Additional info Windows 7; x64 4gb RAM About 100gb LEFT on C:
I am currently running XP as my main OS on one partition but I also have Windows 7 Beta on a separate partition on the same hard drive. Right now I cannot currently access Windows 7 when booting up, I have no clue why that is as I used to be able to do that.
What I want to do is delete the partition Windows 7 Beta is on and install Windows 7 RC as my main OS. I have tried booting to a disc with GParted on it to delete the partition but it will not boot to the cd, I know my BIOS is in the right order as I can easily boot to the Windows 7 RC dvd I have made. When I try to use something like EASEUS Partition Master or the Disk Management on XP, the delete option is greyed out when I right click on the Windows 7 Beta partition. I cannot figure out how to do delete it so I can extend my XP partition to the full space on the hard drive and then install the Windows 7 RC.
Installed 7 Home Premium 32 bit on a partition, now i found out all my drivers, at least the important ones are 64 bit only. How do i remove the partition safely?
So I recently deleted my linux partition on my computer. After doing this I have over 160gb of free space I need to relocate to my c:/ drive. I used computer management to delete the linux partition, now I'm staring at the green box telling me I have free space. So, what to do? Picture included!
i have lenovo g550 i have only two drives c and d. i want to partition d drive if ican i will loose my onekey recovery software. without deleting one key recovery software how can i partition my d drive?
I deleted my partitions by mistake. Drive originally had 2 partitions, 100MB (Windows 7 setup partitiion) and 930GB (Data storage partition). In summary:
1) I deleted the 100MB partition (because disk is(was) now storage disk) and 930gb partition were deleted too. 2) I started following a guide from microsoft and re-create the 2 partitions as RAW (without format). 3) I deleted the 2 raw partition and created a full space partition to the disk QUICK FORMATTING NTFS. 4) Started to try "Recuva" but most of the files recovered (1,000,000 files) are broken, i tried the option to recover Folder Structure but fails.
Is there any way to recover the files and Folder Structure properly? Except of the partitions deletions/creations I didn't write anything inside the disk.
I am preparing a laptop for sale, and have carried out a fresh install of Windows (booting from recovery CD). During this process, I selected 'Custom installation'followed by the hard disk partition containing my personal data and 'Drive options (advanced)', followed by 'Delete'. Is this a secure method of erasure or should I take additional precautionary steps before selling?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
I got new laptop few days before. yesterday i was making 2 more partition. my C drive in which windows 7 has been installed had 500GB of space. so by using external application, i had decreased its size to 300GB. but from that time, some files has been corrupted. I cannot access that files now.. not even C drive.. I dont have recovery disc.
I had fedora12 dual booted on my laptop, I needed to erase the partition and re install Linux, so I deleted the partition data, but when I tried to delete the partition itself. An error popped up saying it cannot be deleted not enough memory
I have Windows 7 64 bit installed on my computer but needed to install a program only compatible with 32 bit, so decided to create a new 3GB partition using the in-built feature in Windows 7 and install Windows XP on it.
I booted up XP, formatted the partition again,a nd let it run through the set up, but as soon as it had copied the files and rebooted, I got the error message 'error loading operating system'.
I really don't know how to fix this - I'm not bothered about installing XP, I can do without it, but the main thing is getting back onto Windows 7 as I have all my files there. I didn't bother making a back up as I thought any problems that could occur would be limited to the partition that I installed Win XP on.
I tried the 'start up repair' utility on the Windows 7 boot disk, and although that said it had repaired a problem, I still get the same error. Although one strange thing I've noticed is that it says that Windows 7 is located on '(E: ) Local Disk' when it was definitely installed on the D: drive - E: was the new partition of size 3GB with Win XP installed, but according to this it is 400GB + with Windows 7.
i tried to change the partition of my laptop but while in the process, i got an error. when i tried to reboot it, it already says disk error. so i tried to reinstall windows but after the "press any key to boot from cd" msg, i only get a blank screen. now i cant reformat my hard disk and cant reinstall any os on it. i even tried hiren's boot cd but i always get a blank screen after booting from it.
i cant also start the laptop on safe mode or even the last known good configuration. when i tried the safe mode, it says about the partition error (long lines of error like "partition (0)disk...system..." something. i am most certain that the cause was the erroneous or interrupted partitioning.
I have just ugraded most parts of my PC including going from 2gb of ram to 8gb. As I am currently running windows 7 home premium 32bit I believe my pc will only be reading 4gb of this ram.
I have downloaded a 64 bit installation iso file & burnt to disk, upon reinstalling I was planning on re-using my current windows product key.
Once past the custom installation option I recieve an error message along the lines of "The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."
I belive my Hard drive has 2 partions, 1 main area for saving files & program files. It also has a factory image drive. This is the first time I have built a PC, Is frustrating to have go this far on my own and get seemingly stuck on what is hopefully the last hurdle
I have a Dell E6410 running 32-bit Windows 7. When I boot the machine with an USB thumb drive attached I get an Invalid Partition Table error. I hold the power button down, remove the thumb drive and then power the machine up. It then boots with no problem.
HP Pavilion dm3 laptop OS Win7 No cd drive No recovery disks Problem: "Invalid Partition" at start Tried: All the F keys (they might as well stand for "f...ng nothing") nothing works.
I just uninstalled ubuntu 10.10 and it worked fine but now when i rebooted I get an error saying:error: no such partition grub rescue> I know that you can fix this by using a windows 7 disk and booting from that but i don't have my windows 7 disk because it came on my computer.Is there any way I can fix this error without a windows 7 disk?
0x8004240F I encounter this error for the very first time and it happens when I try to make a new partition to install Windows 7 on it using Windows 7 installer (not disk management!) The harddisk has a legitimate Recovery partition of HP (which was active and primary) and another data partition. It has 40 gb of free space. Even if I select like 1 or 10 or 20 gb it still gives 0x8004240F error. I made several commands (after installing Windows 7) like bootrec /fixmbr /fixboot /rebuildbcd and they didn't detected the Win 7 I managed to install BUT I made it's partition in Acronis Disk Director suite.
i am installed using Windows 7 ultimate 32bit now. i tried to partition the extended hard disk in my new pc but it shows the error as " no available memory to partition on your computer" so what i do, still there is 215GB of free space with good health.
I had to install windows 7 in my pc.....bt while installing a message always shows up saying "windows could not format a partition on disk 0.an error occured while preparing the partition for installation.error code 0x80070057"my hard drive is samsung HD502H(500GB) and have a partition of 93.1GB.
I had an empty 70 GB partition on the left of my computer and a 230 GB on the right side but I wanted to combine them. Windows was on the 230 GB partition. I booted GParted and combined them, it copied everything from the 230 GB partition over and resized it, it took a few hours.I assumed after it wouldn't boot and all I would have to do is pop in my Windows 7 install disc and go through the repair setup. At first I ran startup repair and it would say it found a problem, and I rebooted and still nothing.. After the bios loads and it lists my DVD drives I just get a cursor _ blinking, nothing else.. No BOOTMGR missing.Odd I thought, so I ran repair again, and again it found another problem. I did this several times before it said it could not detect a problem but it still would do the same thing.I opened the cmd prompt and issued the following commands
I tried installing a second copy of Windows 7 on a 10 GB partition on the end, it went successfully but still blinking cursor. Theres a 54 MB partition at the beginning of type Primary, the main windows one is System and the test windows 7 partition is Primary as well. I thought the first one was usually 100 MB but maybe I am wrong.Still I am stuck with a blinking cursor?
I have an OCZ Agility 3 as well as a Crucial M4 SSD I thought Id setup everything right but then noticed that the drive only had 100 mb available while following some steps from Seans SSD Optimization guide (I finished Step 3, didn't go to Step 4). I went into disk management, saw that the Agility drive was unallocated and that the drive I was seeing iComputer was actually just a 100 mb partition of the Crucial M4.I then created a new simple volume for the Agility, unassigned the partition drive letter, then tried to delete the partition, though the system didt allow me to (I had confused enabling the Agility drive with simply creating a partition so I thought I should get rid of the partition).After restarting, Im getting the bootmgr missing error, which leads me to the conclusion that I definitely messed something up.
* Ive tried using my original install disc to do a recovery install but then I get the error that:his version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows* Ive also skipped to the command prompt and tried to run the bootrec commands to no avail. The bootrec /scanos command recognizes that Windows is installed on the Crucial M4 but I can't rebuild anything off of it.* I also tried to Custom Install on my drives and am told that I cannot install Windows on either Partition 1 or 2 of my Crucial or the Agility 3. I still see the 100 mb partition there marked as "Primary" while the bigger partition with the actual OS files is marked "System. The error message reads:Windows cannot be installed to this disk. The selected disk has an MBR partition table.On EFI systems, Windows can only be installed to GPT disksI'm not sure what else I can do at this point. I just tried unplugging the drives and observed the following:* If both drives are plugged in, then I am unable to do a custom install of Windows onto any of the M4 partitions or the Agility* If the M4 is plugged in (but the Agility is not), then I also cannot install onto either partition* If only the Agility is plugged, then I **can** install Windows and go into the repair install windows but there is no OS, obviously.
0x8004240F. I encounter this error for the very first time and it happens when I try to make a new partition to install Windows 7 on it using Windows 7 installer (not disk management!) The hard disk has a legitimate Recovery partition of HP (which was active and primary) and another data partition. It has 40 gb of free space. Even if I select like 1 or 10 or 20 gb it still gives 0x8004240F error. I made several commands (after installing Windows 7) like bootrec /fixmbr /fixboot /rebuildbcd and they didn't detected the Win 7 I managed to install BUT I made it's partition in Acronis Disk Director suite. After each restart Windows 7 wanted to start chkdsk on drive C (the Win 7 drive) automatically.
Also the system thinks there is an older version of Windows but there isn't. The partition I created with Acronis was reported Primary in acronis, but in Win 7 installer it was reported as logical... Currently it is reported as Extended. Paragon partition manager reported that some partition overlaps another and this must be the key to solving the problem. But why fixboot and fixmbr didn't worked? I even tried them on the other data partition. I haven't modified the Recovery partition only made it hidden and not active. How to check the partition table for errors and fix them so Windows 7 won't get this error?
i scanned my partition for surface error and there are 4 errors, therefore i cannot move/resize, actually i can make unallocated space but i cant add it to another partition
how do i fix this error, what is this error virus?, what software do i need to fix this error does this only need defragging to fix these errors
So basically I have two partitions: Vista C: and Windows 7 D:, boot file is on C:
I had installed Jolicloud OS on my computer and it carved out a drive from my Windows 7 partition. later on I EasyBCD to remove grub when I figured out that it will be a pita to get my wifi working. afterwards i booted from the jolicloud installer, then used Gparted to extend the Windows 7 partition back to it's original size. i then rebooted, and it ran the disk repair, but now Windows 7 won't boot, giving me:
0xc0000225
"Windows did not start correctly. A recent hardware or software change might
be the cause.
If you have aWindows installation disc, insert the disc and restart your
computer. Click system recovery options, and then choose a recovery tool.
(Startup Repair, available in some versions of Windows, can automaitcally
diagnose and fix startup problems.)
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
I've tried to use the recovery feature on my disk, but it cannot see my hard drive and it's not able to locate a driver.
help? Windows Vista is AGONY
also: Easy BCD whe running from Vista says:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 10 seconds.
Default OS: Microsoft Windows Vista
Entry #1
Name: Windows 7
BCD ID: {6d574dfa-cef3-11de-a588-9966156464d7}
Drive: Deleted Partition
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows i'm going to re add the entry for 7 via easybcd. if you don't hear from me in ten minutes then you will know that this didn't work.
I have installed windows 7 on my D: partition because my windows from C: wasn't working anymore and I didn't wanted to format C so I won't lose my files.After i solved my problem with the windows on C, i deleted the windows (including all files that he creates) from partition D. But after that i found a problem, when i installed windows on D he changed the permissions on my files so i couldn't access them anymore.I managed to restore the permissions of my files but there remained one problem that is disturbing me: i can't copy or create any file anything on my D: partition because i get a message "Please remove the write protection!" or "Error 0x80070522
So I have a machine on my hands that is suffering registry damage due to viruses that I managed to remove but I still can't get the registry repaired since the computer has no recovery partition and the original cd is gone. System restore did nothing so I'm wondering if there is a way to fix the registry with what those things missing.
