Invalid Partition Error On HP Pavilion Dm3

Dec 18, 2012

HP Pavilion dm3 laptop OS Win7 No cd drive No recovery disks Problem: "Invalid Partition" at start Tried: All the F keys (they might as well stand for "f...ng nothing") nothing works.

View 1 Replies


ADVERTISEMENT

Invalid Partition Table Error?

Sep 1, 2012

I have a Dell E6410 running 32-bit Windows 7. When I boot the machine with an USB thumb drive attached I get an Invalid Partition Table error. I hold the power button down, remove the thumb drive and then power the machine up. It then boots with no problem.

View 3 Replies View Related

Invalid Partition Table - Error Message (0x8000ffff)

Apr 29, 2012

A few weeks ago my computer turned off unexpectedly while I was using it. When I tried to start it up again, I got a black screen with a blinking cursor. I tried going into BIOS and changing the startup order to no avail. It's now back on default. I also ran the system diagnostic and it said nothing is wrong.I got a Windows 7 repair disk and attempted to use that. I ran the startup diagonosis and restarted-- again a black screen with a blinking cursor. I restored it to an earlier point and restarted-- black screen with blinking cursor. I then attempted to restore it to other points but got an error message (0x8000ffff) each time. Finally, I tried command prompt and did "bootsect /nt60 ALL" which did nothing. So I tried "bootsect /nt52 ALL" which did nothing. I did both of those again with "/force" (which I'm now guessing was a stupid move, but I was desperate to try anything) and now when I restart I get a black screen with "Invalid partition table". When I try to go to system restore now it tells me there are no restore points.

View 3 Replies View Related

Invalid Partition Table?

Jul 18, 2012

I just recently fixed my laptop a while back ago, and now I am having problems again.I was drawing on my laptop and I received an update for Flash Player. Well, I started to update and as soon as I clicked start, I went back to drawing.30 seconds later, with no warning whatsoever, My computer was closing all my programs, and restarted itself with out a prompt. However, when it did reboot, I got a message saying Invalid Partition Table.So, i was like wtf, like any person. I tried rebooting and going into safe mode. It wouldn't let me. AT ALL. The f8 function does not work. actually the only functions that do work is f2 for setup and f12 for boot options

View 7 Replies View Related

Invalid Partition Table?

Feb 7, 2013

I am running a small network at my house, and I have a Win2003 server that seems to have problems. It doesn't boot anymore. One suggestion was to take the hard disk, connect it to another computer and work on it. Ok, so I did that. Took the HD from the 2003 machine, got a connection kit for USB and connected it to my Win7/64 notbook. Of course, that blew up my notebook-When I connected the HD, the laptop froze. Obviously, I had not choice but to remove the external hard drive and reboot. The reboot now ends up in a single line: Invalid Partition Table.I have tried the system Recovery Options on the DVD, but the automatic options don't work. So I need to find another way to restore the partition table.

View 14 Replies View Related

Invalid Partition Table?

Jun 9, 2012

Win 7 hpSlimline...black screen with "Invalid Partition table_"

View 1 Replies View Related

Invalid Partition Table

Nov 21, 2009

Basically while I was running Windows 7 I wanted to clone my 149GB Hard Drive to a 500GB partition on my 1TB HardDrive, with Ubuntu taking up the other 500GB.

I coulnd'nt clone using Windows tools because I always had an error of some sort. I then tried cloning using various Ubuntu tools on the Live CD - these didnt work either. I then tried dd if= of= command and it copied about 50% before an I/O error.

After the dd failed I tried booting Windows 7. The boot manager gave me 2 options. Win 7 ultimate and win 7 ultimate (recovered) win 7 ultimate never booted, because it was the new-er, half-cloned HD. The other windows loaded but was bugged, had to manually run explorer etc.

View 8 Replies View Related

Invalid IP Config Error

Mar 27, 2009

I just upgrade from bulid 7000 to build 7057. when i try to connect to the Internet it gets connected but when i try to surf no page loads. when i clicked on diagnose problem it says my comp doesn't have a valid ip config, wat do i do

View 7 Replies View Related

Certificate Error; Invalid URL Error

Dec 15, 2012

I suspect an ieframe.dll issue. It happens intermittently on two laptops in my home. Have reset modom and router, restarted computers. Google Chrome even cites Invalid URL!

View 3 Replies View Related

Invalid Floating Point Error

Apr 27, 2012

On particular s/w startup I'm getting Invalid floating point error and application freezes.

Sys config:
Win 7 Prof 64bits SP 1
AMD A8 with AMD Readon HD 6550D Graphics
4GB DDR3

View 3 Replies View Related

'Handle Is Invalid' Error *only* On .DOC Files?

May 21, 2012

I'm new here, guys, so don't shoot me down in flames if this has been covered. I've checked the search, but didn't come up with anything the same.I've just re-jigged the Good Lady's PC - it had some sort of virus. Wiped it & re-installed Win 7 Pro.Put back most of the stuff that was there & most everything works except anything that's a '.doc' file.Clicking on any one of those produces a 'Handle is Invalid' error & won't start. However, dragging & dropping on LibreOffice starts up the file & it can be edited. Saving it again does not fix the problemOne noticeable difference is that I have gone from MS Office XP to LibreOffice as the old XP was no longer opening some new file being sent to her (choir!).I am wondering if this may be the cause. I have a copy of MS Office 2010 & will try installing that & taking control of the .doc files. I'll see if that fixes it

View 1 Replies View Related

All Plugins Have INVALID APPLICATION Error

Dec 6, 2009

I just got a brand new Touchsmart 300z running Windows 7 x64 Home Premium. I set up Windows Media Center, and added Mediabrowser for better TV show support.

Mediabrowser sometimes behaves normally, other times it gives me an INVALID APPLICATION unable to launch Mediabrowser error. I usually don't get the error when I first launch Mediabrowser. I usually get it (only sometimes) when entering one of the media collections, trying to play a video (again, only *sometimes*), trying to save settings, etc. The crazy thing is, sometimes it works.

It does seem to consistently give me the error for some video files. For others it might give me the error *sometimes*. Sometimes I can play the file without problem, other times I get the error.

All files play correctly in native Media Center, in the Touchsmart software (which also doesn't support TV series collections very well), and WMP.

Thinking this might be a video-related problem, I also installed Heatwave, GameEx, and mcShoutcast. Heatwave also gives me this error -- SOMETIMES. mcShoutcast and GameEx seem to always give the error. For kicks I also tried TunerFreeMCE - always gives the error.

I have tried various things like manually deleting caches, changing permissions for the ProgramData folder for the plugin to allow everything from the user profile that I log in with to run Media Center... Nothing has worked.

Yet I can use the native Media Center capability for videos, music, Internet TV, etc.

Basically, the upshot is that NO PLUGINS WORK CORRECTLY. I suspect that it is at least partially due to x64, based on the fact that when others have had the same errors that could not be resolved using the normal fixes, they were x64 also. Seems like the 7RC had less trouble from what I have been reading...

I'm very frustrated, and am thinking of returning the s****y Touchsmart and building a Windows 7 32bit or Vista 32-bit box... Maybe using XBMC or something and skipping the tuner all together, though the husband would really like to watch live sports OTA.

View 2 Replies View Related

Backup Error: The Handle Is Invalid

Dec 2, 2009

I have setup the backup utility to use my network drive and create an image and copy the my doc folder. When I run the utility it will go through it's process for a long time before providing the following error information:

Check your backup

One of the backup files could not be created.

Details: The handle is invalid.

Error code: 0x8078002A

I am unfamiliar with what the error means and when I go to the network drive the backup zip files say they are also corrupt. Has anyone come across this, or have an idea as to what the problem may be?

View 1 Replies View Related

Error 1327 Invalid Driver:F

Aug 31, 2011

I am trying to install a new program and when I put in my cd and it starts to install, this message comes up. How do I fixed this?

View 1 Replies View Related

Windows 7 Sp1 Error Invalid Parameter 0x80070057

Nov 14, 2011

Windows 7 automatic update downloads KB2586448 security update and sp1 but install fails. I have been trying to get theese updates on for 8 months. Tried from microsoft website, tried dissabling antivirus, spyware, tried in safe mode.

View 2 Replies View Related

Lost Recovery Partition - How To Format HP Pavilion G6

Oct 31, 2012

I have a Hp pavilion g6, I've lost my recovery partition and I need to format my computer, when i start it, I have windows 7 on DVD but when I insert it and I click on F11 this message appears :

Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000225
Info: An error occurred when attempting to read the boot configuration data

View 4 Replies View Related

Hp Pavilion A815n Stuck After Resizing Partition?

Mar 3, 2012

I was going to partition my hdd it had 72gb free and it has 160gb so i partitioning the hard drive (i used partition wizard) i always use that program.After it finished it reboot then it got stuck at bios it would not load any cd or dvd it will just hang there.There it says two options "Press F1 to run setup" i press it and says "Entering Setup..." and nothing happens and "Press ESC for BBS POPUP menu i press it and says "Boot selection popup menu has been selected"This is what the screen says:

AMIBIOS(C) American Megatrends, Inc.
BIOS Date: 02/02/05 13:04:54 Ver: 08.00.10
Copyright 2005 by Hewlett-Packard Company

[code].....

I was trying to resize my partition but it just stopped and got stuck at "Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK". As i mentioned above I tried to boot of a cd/dvd but it wouldnt work i have 2 other hard drives and the work perfect.

View 9 Replies View Related

Installing Downloaded Software On Windows 7 - File Corrupt Or Certificate Invalid Error

Aug 6, 2011

I have a PC with windows vista installed. I recently bought windows 7 home premium and installed a fresh copy of it. Every time I download some software like Chrome, VLC, iTunes , it downloads fine, but when it has to install it gives strange errors. I have seen all kinds of errors.

E.g.: VLC gives NSIS error.
Microsoft Security Essentials gives "File Corrupt Error".
Got certificate invalid error for some other software. if I download zip files, they fail with CRC check.

Just to be sure it wasn't hardware issue, I installed vista as a second OS and that works fine. I am really uncertain what is causing the issue (seems network related though). I had an old router and just purchased a new linksys router. Other configurations are: Core 2 Quad, EVGA SLI ready motherboard, 4GB DDR2 ram, ASUS EN210 gphx card.

View 4 Replies View Related

[INSTALL] Error 1324. The Folder Path 'Norwegian (Bokm?)' Contains An Invalid Character?

Apr 14, 2011

I tried to install FinalDraft8 on my system, but I'm getting the error message:"Error 1324. The folder path 'Norwegian (Bokm?)' contains an invalid character"I tried repairing the registry with CC Cleaner, but no use. his?My System Configuration:Dell Inspiron running on OS: Win 7 Home Premium 64 BitThe OS is in Korean, so I'm running Vistalizator for EN language.

View 3 Replies View Related

"invalid Iso File" Error Message In Windows 7 Usb/dvd Tool

Mar 30, 2012

i had a iso file of windows 7 ultimate. i want to format my laptop..so i thought of creating a bootable dvd.

but when i was selecting the iso file of windows 7 ultimate...it is giving an error message as "invalid iso file"

View 5 Replies View Related

How To Avoid "invalid IP Configuration" Connection Error

Nov 17, 2012

I have a problem with my internet connection on my PC.The internet connection works fine, until I let my PC idle for about an hour or so. The connection then dies, but can be repaired by the Windows Troubleshooter which fixes the error message about the invalid IP configuration.I've reset the modem and the router many times. Windows 7 | PC connected with wire and wireless from router | Wireless keeps working to other devices, but not to PC

View 3 Replies View Related

Setup Was Unable To Create A New System Partition Or Locate An Existing System Partition - Installation Error

Dec 28, 2011

I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.

View 9 Replies View Related

Get Error 6 "The Handle Is Invalid"

Dec 31, 2012

When I try to connect a wireless modem, I get Error 6 "The handle is invalid" message. Whats the problem?

View 2 Replies View Related

Error 0x80070570 - Pavilion A6457c Desktop

Dec 4, 2009

I Have a Pavilion a6457c Desktop that I have been trying to put a copy of win 7 on that i bought from my school and I keep coming up with this error 0x80070570. Unfortunately I don't have a recovery disk or drive, (I wiped it when I first tried the upgrade, I know, stupid move on my part).. what can i do to get this thing working again,

View 5 Replies View Related

Error In Making Partition

Nov 11, 2012

I got new laptop few days before. yesterday i was making 2 more partition. my C drive in which windows 7 has been installed had 500GB of space. so by using external application, i had decreased its size to 300GB. but from that time, some files has been corrupted. I cannot access that files now.. not even C drive.. I dont have recovery disc.

View 3 Replies View Related

Partition Delete Error?

Jun 21, 2011

I had fedora12 dual booted on my laptop, I needed to erase the partition and re install Linux, so I deleted the partition data, but when I tried to delete the partition itself. An error popped up saying it cannot be deleted not enough memory

View 5 Replies View Related

Error After Installing Win XP On Partition

Sep 16, 2009

I have Windows 7 64 bit installed on my computer but needed to install a program only compatible with 32 bit, so decided to create a new 3GB partition using the in-built feature in Windows 7 and install Windows XP on it.

I booted up XP, formatted the partition again,a nd let it run through the set up, but as soon as it had copied the files and rebooted, I got the error message 'error loading operating system'.

I really don't know how to fix this - I'm not bothered about installing XP, I can do without it, but the main thing is getting back onto Windows 7 as I have all my files there. I didn't bother making a back up as I thought any problems that could occur would be limited to the partition that I installed Win XP on.

I tried the 'start up repair' utility on the Windows 7 boot disk, and although that said it had repaired a problem, I still get the same error. Although one strange thing I've noticed is that it says that Windows 7 is located on '(E: ) Local Disk' when it was definitely installed on the D: drive - E: was the new partition of size 3GB with Win XP installed, but according to this it is 400GB + with Windows 7.

View 9 Replies View Related

Error While Deleting Partition?

Aug 15, 2011

Im using windows 7 OS, I have 2 different Hard Disk 1 is for OS 40 gig and 2nd 80gig is for my files, problem is the second HDD have a partition of 11gig and 69gig, i use it previously for my XP OS.. now im trying to re size my partion in 2nd hdd im trying to make 11gig into like 25gig up.. and this is what ive done.. i partition my 69gig to 20-49 and i try to delete 30gig so that i can merge 11 gig and 20 gig..when i delete the 20gig it become free space. and when i try to merge 11 and 20gig i cant their is no function of extend in 11gig partition, and then when i try to make new simple volume in that 20gig i deleted it shows an error of "Their is not enough space on the disk to perform this operation"..

View 3 Replies View Related

Cannot Install New Os Due To Partition Error

Jan 14, 2010

i tried to change the partition of my laptop but while in the process, i got an error. when i tried to reboot it, it already says disk error. so i tried to reinstall windows but after the "press any key to boot from cd" msg, i only get a blank screen. now i cant reformat my hard disk and cant reinstall any os on it. i even tried hiren's boot cd but i always get a blank screen after booting from it.

i cant also start the laptop on safe mode or even the last known good configuration. when i tried the safe mode, it says about the partition error (long lines of error like "partition (0)disk...system..." something. i am most certain that the cause was the erroneous or interrupted partitioning.

View 4 Replies View Related

MBR Partition Error When Reinstalling From 32 Bit To 64 Bit

Apr 6, 2012

I have just ugraded most parts of my PC including going from 2gb of ram to 8gb. As I am currently running windows 7 home premium 32bit I believe my pc will only be reading 4gb of this ram.

I have downloaded a 64 bit installation iso file & burnt to disk, upon reinstalling I was planning on re-using my current windows product key.

Once past the custom installation option I recieve an error message along the lines of "The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."

I belive my Hard drive has 2 partions, 1 main area for saving files & program files. It also has a factory image drive. This is the first time I have built a PC, Is frustrating to have go this far on my own and get seemingly stuck on what is hopefully the last hurdle

View 5 Replies View Related

Error: No Such Partition Grub Rescue

Feb 9, 2011

I just uninstalled ubuntu 10.10 and it worked fine but now when i rebooted I get an error saying:error: no such partition grub rescue>
I know that you can fix this by using a windows 7 disk and booting from that but i don't have my windows 7 disk because it came on my computer.Is there any way I can fix this error without a windows 7 disk?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved