Invalid Partition Table Error?

Sep 1, 2012

I have a Dell E6410 running 32-bit Windows 7. When I boot the machine with an USB thumb drive attached I get an Invalid Partition Table error. I hold the power button down, remove the thumb drive and then power the machine up. It then boots with no problem.

View 3 Replies


ADVERTISEMENT

Invalid Partition Table - Error Message (0x8000ffff)

Apr 29, 2012

A few weeks ago my computer turned off unexpectedly while I was using it. When I tried to start it up again, I got a black screen with a blinking cursor. I tried going into BIOS and changing the startup order to no avail. It's now back on default. I also ran the system diagnostic and it said nothing is wrong.I got a Windows 7 repair disk and attempted to use that. I ran the startup diagonosis and restarted-- again a black screen with a blinking cursor. I restored it to an earlier point and restarted-- black screen with blinking cursor. I then attempted to restore it to other points but got an error message (0x8000ffff) each time. Finally, I tried command prompt and did "bootsect /nt60 ALL" which did nothing. So I tried "bootsect /nt52 ALL" which did nothing. I did both of those again with "/force" (which I'm now guessing was a stupid move, but I was desperate to try anything) and now when I restart I get a black screen with "Invalid partition table". When I try to go to system restore now it tells me there are no restore points.

View 3 Replies View Related

Invalid Partition Table?

Jul 18, 2012

I just recently fixed my laptop a while back ago, and now I am having problems again.I was drawing on my laptop and I received an update for Flash Player. Well, I started to update and as soon as I clicked start, I went back to drawing.30 seconds later, with no warning whatsoever, My computer was closing all my programs, and restarted itself with out a prompt. However, when it did reboot, I got a message saying Invalid Partition Table.So, i was like wtf, like any person. I tried rebooting and going into safe mode. It wouldn't let me. AT ALL. The f8 function does not work. actually the only functions that do work is f2 for setup and f12 for boot options

View 7 Replies View Related

Invalid Partition Table?

Feb 7, 2013

I am running a small network at my house, and I have a Win2003 server that seems to have problems. It doesn't boot anymore. One suggestion was to take the hard disk, connect it to another computer and work on it. Ok, so I did that. Took the HD from the 2003 machine, got a connection kit for USB and connected it to my Win7/64 notbook. Of course, that blew up my notebook-When I connected the HD, the laptop froze. Obviously, I had not choice but to remove the external hard drive and reboot. The reboot now ends up in a single line: Invalid Partition Table.I have tried the system Recovery Options on the DVD, but the automatic options don't work. So I need to find another way to restore the partition table.

View 14 Replies View Related

Invalid Partition Table?

Jun 9, 2012

Win 7 hpSlimline...black screen with "Invalid Partition table_"

View 1 Replies View Related

Invalid Partition Table

Nov 21, 2009

Basically while I was running Windows 7 I wanted to clone my 149GB Hard Drive to a 500GB partition on my 1TB HardDrive, with Ubuntu taking up the other 500GB.

I coulnd'nt clone using Windows tools because I always had an error of some sort. I then tried cloning using various Ubuntu tools on the Live CD - these didnt work either. I then tried dd if= of= command and it copied about 50% before an I/O error.

After the dd failed I tried booting Windows 7. The boot manager gave me 2 options. Win 7 ultimate and win 7 ultimate (recovered) win 7 ultimate never booted, because it was the new-er, half-cloned HD. The other windows loaded but was bugged, had to manually run explorer etc.

View 8 Replies View Related

Windows 7 Ultimate 64 Bit Install Error Due To MBR Partition Table?

Jan 2, 2013

then i tried to install windows 7 ultimate from inside the windows 8.after the end of installtion during completeing step installtion stops responding.and my winddowss not installed andd my previously installed windddow also stops working.and after i tried to install winodw from dvd but after all setting and drive setting when then actual installation strtts .the first step which is coping files completes in 1 sec. and go to second step and stop responding.

View 1 Replies View Related

Windows 7 Ultimate 64bit Install Error Due To MBR Partition Table?

Jan 7, 2012

I encountered an error that stated:windows can not be installed to this disk the selected disk has an MBR partition table on EFI systems, windows can only be installed to GPT disks."

Windows 7 Ultimate 64bit
INTEL 3930K
2 x GIGABYTE HD6970
CORSAIR Dmntr 4X8/32gb DDR3/1600
WD 2TB CAVIAR BLACK 64MB/7200PRM
CORSAIR FORCE 3 120GB SSD
ASUS P9X79 DELUXE MB
CORSAIR H100 COOLER
CORSAIR HX1050W

clean install to mechanical not SSD so you can use ASUS software once WIN 7 installed to merge them with the "Marvell 9128 6GB port"...Regarding BIOS funnily enough I have seen images of the UEFI BIOS in forums with all 8 ports on the deluxe in SATA configuration in advanced settings however mine only shows six (and no duplicate for UEFI like other images of UEFI i've seen"?and I have updated the UEFI BIOS to the latest version..

View 8 Replies View Related

Invalid Partition Error On HP Pavilion Dm3

Dec 18, 2012

HP Pavilion dm3 laptop OS Win7 No cd drive No recovery disks Problem: "Invalid Partition" at start Tried: All the F keys (they might as well stand for "f...ng nothing") nothing works.

View 1 Replies View Related

The Partition Table Does Not Have A Valid System Partition

Jul 24, 2011

I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.

View 1 Replies View Related

Partition Table Messed Up

Jun 14, 2010

Im having some problems putting windows 7 on my iMac. At first, it worked fine. But i lost the reinstall disk so i made an image backup on my external hard drive. Before, i was triple booting Ubuntu, OS X, and Windows 7. I had a huge problem in windows so i restored from a backup. But now, my bootloader rEFIt keeps trying to change my mbr. whenever i try to, it makes windows unbootable. I have the MBR contents, and i noticed that it says theres 2 NTFS partitions. and when i try to install ubuntu, it wants to format the NTFS Partition and delete windows. Is there a way to fix it so i can have all three booting?

View 1 Replies View Related

Selected Disk Has An MBR Partition Table

May 21, 2011

l am having a problem with installing due to a disk partition problem.. Im getting an error that says "The selected disk has an MBR partition table. On EFI systems Windows can only be installed to GPT disks".I have no clue and reading other forums it sounded like specific computers were having this problem but I built mine.Had a Windows 7 Ultimate x64 I used from a friend with no Key, Microsoft doesn't like that so I purchased a Key from them for Premium, used a W7 x32 disk by accident and I have 12 GBs of Ram so pretty inefficient.. I downloaded a W7 x64 version and am now having this problem...; First I've down this now bc Microsoft said they would send me a disk in the mail when I bought the Key but that was about 3 weeks ago and I would like to use my computer to its capabilities.

View 5 Replies View Related

Can't Install Win7 On GUID Partition Table

Sep 21, 2009

Is it possible to install Windows 7 on a GPT disk?

I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:

Disk 0 Part 1 - 102 MB EFI System

Disk 0 Part 2 - 128 MB MSR

Disk 0 Part 3 - 500 MB Primary

Disk 0 Part 4 - 7446 GB Primary

But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."

What gives? I thought Windows Vista and beyond supported GPT.

The problem with MBR is that you can't have a file system larger than 2 TB.

View 6 Replies View Related

Will Backup Tool Save The Partition Table ?

Oct 5, 2009

I have a OCZ Vertex.

My vertx is aligned on rules 1&2 but missaligned under rule#3
Guide RAID / Non-RAID Partition Alignment for max performance - OCZ Forum

Can i use windows 7 backup tool and have them saved on DVDs, then use the windows 7 disk to format the drive (hopefully making it aligned)?

Or will the backup tool save the partition table (and the misalignet) aswell?

Partition Offset 65536

File Allocation Unit Size 4096

Disk Sector Size 512

NAND Erase Block Size 524288 (left sence i have vertex 30gb (Mac edition))

NAND Page Size 4096 (left sence i have vertex 30gb (Mac edition))

View 6 Replies View Related

Windows 7 Ultimate X64 Will Not Mount Guid Partition Table Hard Disk

Sep 4, 2011

I have an external 3TB hard drive, USB. I used a mac to partition it, 2.25TB is HFS+ (Mac OS extended - journaled) and the other is 490gb NTFS (to use on windows). It would not give me the option to use MBR (master boot record) so i used the GUID table. It works fine on macs, but windows tells me i need to reformat it. It is my understanding that most all 64bit versions of windows can read/write a GUID disk. I do not need to boot off of the drive. this is another addition to the list of "why i hate windows"

View 6 Replies View Related

Windows 7 Giving Device Mapping Table Error

May 18, 2012

My computer randomly decided to turn off and I figured it was updates, now when it restarts it goes to "device mapping table" I was running windows 7. Anyone know why it might do this and how to fix it?

View 6 Replies View Related

Invalid IP Config Error

Mar 27, 2009

I just upgrade from bulid 7000 to build 7057. when i try to connect to the Internet it gets connected but when i try to surf no page loads. when i clicked on diagnose problem it says my comp doesn't have a valid ip config, wat do i do

View 7 Replies View Related

Certificate Error; Invalid URL Error

Dec 15, 2012

I suspect an ieframe.dll issue. It happens intermittently on two laptops in my home. Have reset modom and router, restarted computers. Google Chrome even cites Invalid URL!

View 3 Replies View Related

Invalid Floating Point Error

Apr 27, 2012

On particular s/w startup I'm getting Invalid floating point error and application freezes.

Sys config:
Win 7 Prof 64bits SP 1
AMD A8 with AMD Readon HD 6550D Graphics
4GB DDR3

View 3 Replies View Related

'Handle Is Invalid' Error *only* On .DOC Files?

May 21, 2012

I'm new here, guys, so don't shoot me down in flames if this has been covered. I've checked the search, but didn't come up with anything the same.I've just re-jigged the Good Lady's PC - it had some sort of virus. Wiped it & re-installed Win 7 Pro.Put back most of the stuff that was there & most everything works except anything that's a '.doc' file.Clicking on any one of those produces a 'Handle is Invalid' error & won't start. However, dragging & dropping on LibreOffice starts up the file & it can be edited. Saving it again does not fix the problemOne noticeable difference is that I have gone from MS Office XP to LibreOffice as the old XP was no longer opening some new file being sent to her (choir!).I am wondering if this may be the cause. I have a copy of MS Office 2010 & will try installing that & taking control of the .doc files. I'll see if that fixes it

View 1 Replies View Related

All Plugins Have INVALID APPLICATION Error

Dec 6, 2009

I just got a brand new Touchsmart 300z running Windows 7 x64 Home Premium. I set up Windows Media Center, and added Mediabrowser for better TV show support.

Mediabrowser sometimes behaves normally, other times it gives me an INVALID APPLICATION unable to launch Mediabrowser error. I usually don't get the error when I first launch Mediabrowser. I usually get it (only sometimes) when entering one of the media collections, trying to play a video (again, only *sometimes*), trying to save settings, etc. The crazy thing is, sometimes it works.

It does seem to consistently give me the error for some video files. For others it might give me the error *sometimes*. Sometimes I can play the file without problem, other times I get the error.

All files play correctly in native Media Center, in the Touchsmart software (which also doesn't support TV series collections very well), and WMP.

Thinking this might be a video-related problem, I also installed Heatwave, GameEx, and mcShoutcast. Heatwave also gives me this error -- SOMETIMES. mcShoutcast and GameEx seem to always give the error. For kicks I also tried TunerFreeMCE - always gives the error.

I have tried various things like manually deleting caches, changing permissions for the ProgramData folder for the plugin to allow everything from the user profile that I log in with to run Media Center... Nothing has worked.

Yet I can use the native Media Center capability for videos, music, Internet TV, etc.

Basically, the upshot is that NO PLUGINS WORK CORRECTLY. I suspect that it is at least partially due to x64, based on the fact that when others have had the same errors that could not be resolved using the normal fixes, they were x64 also. Seems like the 7RC had less trouble from what I have been reading...

I'm very frustrated, and am thinking of returning the s****y Touchsmart and building a Windows 7 32bit or Vista 32-bit box... Maybe using XBMC or something and skipping the tuner all together, though the husband would really like to watch live sports OTA.

View 2 Replies View Related

Backup Error: The Handle Is Invalid

Dec 2, 2009

I have setup the backup utility to use my network drive and create an image and copy the my doc folder. When I run the utility it will go through it's process for a long time before providing the following error information:

Check your backup

One of the backup files could not be created.

Details: The handle is invalid.

Error code: 0x8078002A

I am unfamiliar with what the error means and when I go to the network drive the backup zip files say they are also corrupt. Has anyone come across this, or have an idea as to what the problem may be?

View 1 Replies View Related

Error 1327 Invalid Driver:F

Aug 31, 2011

I am trying to install a new program and when I put in my cd and it starts to install, this message comes up. How do I fixed this?

View 1 Replies View Related

Windows 7 Sp1 Error Invalid Parameter 0x80070057

Nov 14, 2011

Windows 7 automatic update downloads KB2586448 security update and sp1 but install fails. I have been trying to get theese updates on for 8 months. Tried from microsoft website, tried dissabling antivirus, spyware, tried in safe mode.

View 2 Replies View Related

"FATAL ERROR: Failed To Locate Necessary Table(s) To Make Adjustments. Press Any Key To Continue Booting"

Jan 27, 2012

I decided to install Windows7 Home Premium on my HP dc5000 SFF. it installed fine but every time it reboots, I get an error that says..."FATAL ERROR: Failed to locate necessary table(s) to make adjustments. Press any key to continue booting"This only happens when using the "restart" mode. if I use "shut down" and let the computer turn completely off, it will start with no errors!

View 8 Replies View Related

Installing Downloaded Software On Windows 7 - File Corrupt Or Certificate Invalid Error

Aug 6, 2011

I have a PC with windows vista installed. I recently bought windows 7 home premium and installed a fresh copy of it. Every time I download some software like Chrome, VLC, iTunes , it downloads fine, but when it has to install it gives strange errors. I have seen all kinds of errors.

E.g.: VLC gives NSIS error.
Microsoft Security Essentials gives "File Corrupt Error".
Got certificate invalid error for some other software. if I download zip files, they fail with CRC check.

Just to be sure it wasn't hardware issue, I installed vista as a second OS and that works fine. I am really uncertain what is causing the issue (seems network related though). I had an old router and just purchased a new linksys router. Other configurations are: Core 2 Quad, EVGA SLI ready motherboard, 4GB DDR2 ram, ASUS EN210 gphx card.

View 4 Replies View Related

[INSTALL] Error 1324. The Folder Path 'Norwegian (Bokm?)' Contains An Invalid Character?

Apr 14, 2011

I tried to install FinalDraft8 on my system, but I'm getting the error message:"Error 1324. The folder path 'Norwegian (Bokm?)' contains an invalid character"I tried repairing the registry with CC Cleaner, but no use. his?My System Configuration:Dell Inspiron running on OS: Win 7 Home Premium 64 BitThe OS is in Korean, so I'm running Vistalizator for EN language.

View 3 Replies View Related

"invalid Iso File" Error Message In Windows 7 Usb/dvd Tool

Mar 30, 2012

i had a iso file of windows 7 ultimate. i want to format my laptop..so i thought of creating a bootable dvd.

but when i was selecting the iso file of windows 7 ultimate...it is giving an error message as "invalid iso file"

View 5 Replies View Related

How To Avoid "invalid IP Configuration" Connection Error

Nov 17, 2012

I have a problem with my internet connection on my PC.The internet connection works fine, until I let my PC idle for about an hour or so. The connection then dies, but can be repaired by the Windows Troubleshooter which fixes the error message about the invalid IP configuration.I've reset the modem and the router many times. Windows 7 | PC connected with wire and wireless from router | Wireless keeps working to other devices, but not to PC

View 3 Replies View Related

Setup Was Unable To Create A New System Partition Or Locate An Existing System Partition - Installation Error

Dec 28, 2011

I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.

View 9 Replies View Related

Get Error 6 "The Handle Is Invalid"

Dec 31, 2012

When I try to connect a wireless modem, I get Error 6 "The handle is invalid" message. Whats the problem?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved