Im having some problems putting windows 7 on my iMac. At first, it worked fine. But i lost the reinstall disk so i made an image backup on my external hard drive. Before, i was triple booting Ubuntu, OS X, and Windows 7. I had a huge problem in windows so i restored from a backup. But now, my bootloader rEFIt keeps trying to change my mbr. whenever i try to, it makes windows unbootable. I have the MBR contents, and i noticed that it says theres 2 NTFS partitions. and when i try to install ubuntu, it wants to format the NTFS Partition and delete windows. Is there a way to fix it so i can have all three booting?
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
I just recently fixed my laptop a while back ago, and now I am having problems again.I was drawing on my laptop and I received an update for Flash Player. Well, I started to update and as soon as I clicked start, I went back to drawing.30 seconds later, with no warning whatsoever, My computer was closing all my programs, and restarted itself with out a prompt. However, when it did reboot, I got a message saying Invalid Partition Table.So, i was like wtf, like any person. I tried rebooting and going into safe mode. It wouldn't let me. AT ALL. The f8 function does not work. actually the only functions that do work is f2 for setup and f12 for boot options
I am running a small network at my house, and I have a Win2003 server that seems to have problems. It doesn't boot anymore. One suggestion was to take the hard disk, connect it to another computer and work on it. Ok, so I did that. Took the HD from the 2003 machine, got a connection kit for USB and connected it to my Win7/64 notbook. Of course, that blew up my notebook-When I connected the HD, the laptop froze. Obviously, I had not choice but to remove the external hard drive and reboot. The reboot now ends up in a single line: Invalid Partition Table.I have tried the system Recovery Options on the DVD, but the automatic options don't work. So I need to find another way to restore the partition table.
Basically while I was running Windows 7 I wanted to clone my 149GB Hard Drive to a 500GB partition on my 1TB HardDrive, with Ubuntu taking up the other 500GB.
I coulnd'nt clone using Windows tools because I always had an error of some sort. I then tried cloning using various Ubuntu tools on the Live CD - these didnt work either. I then tried dd if= of= command and it copied about 50% before an I/O error.
After the dd failed I tried booting Windows 7. The boot manager gave me 2 options. Win 7 ultimate and win 7 ultimate (recovered) win 7 ultimate never booted, because it was the new-er, half-cloned HD. The other windows loaded but was bugged, had to manually run explorer etc.
I have a Dell E6410 running 32-bit Windows 7. When I boot the machine with an USB thumb drive attached I get an Invalid Partition Table error. I hold the power button down, remove the thumb drive and then power the machine up. It then boots with no problem.
l am having a problem with installing due to a disk partition problem.. Im getting an error that says "The selected disk has an MBR partition table. On EFI systems Windows can only be installed to GPT disks".I have no clue and reading other forums it sounded like specific computers were having this problem but I built mine.Had a Windows 7 Ultimate x64 I used from a friend with no Key, Microsoft doesn't like that so I purchased a Key from them for Premium, used a W7 x32 disk by accident and I have 12 GBs of Ram so pretty inefficient.. I downloaded a W7 x64 version and am now having this problem...; First I've down this now bc Microsoft said they would send me a disk in the mail when I bought the Key but that was about 3 weeks ago and I would like to use my computer to its capabilities.
Is it possible to install Windows 7 on a GPT disk?
I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:
Disk 0 Part 1 - 102 MB EFI System
Disk 0 Part 2 - 128 MB MSR
Disk 0 Part 3 - 500 MB Primary
Disk 0 Part 4 - 7446 GB Primary
But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
What gives? I thought Windows Vista and beyond supported GPT.
The problem with MBR is that you can't have a file system larger than 2 TB.
A few weeks ago my computer turned off unexpectedly while I was using it. When I tried to start it up again, I got a black screen with a blinking cursor. I tried going into BIOS and changing the startup order to no avail. It's now back on default. I also ran the system diagnostic and it said nothing is wrong.I got a Windows 7 repair disk and attempted to use that. I ran the startup diagonosis and restarted-- again a black screen with a blinking cursor. I restored it to an earlier point and restarted-- black screen with blinking cursor. I then attempted to restore it to other points but got an error message (0x8000ffff) each time. Finally, I tried command prompt and did "bootsect /nt60 ALL" which did nothing. So I tried "bootsect /nt52 ALL" which did nothing. I did both of those again with "/force" (which I'm now guessing was a stupid move, but I was desperate to try anything) and now when I restart I get a black screen with "Invalid partition table". When I try to go to system restore now it tells me there are no restore points.
then i tried to install windows 7 ultimate from inside the windows 8.after the end of installtion during completeing step installtion stops responding.and my winddowss not installed andd my previously installed windddow also stops working.and after i tried to install winodw from dvd but after all setting and drive setting when then actual installation strtts .the first step which is coping files completes in 1 sec. and go to second step and stop responding.
I encountered an error that stated:windows can not be installed to this disk the selected disk has an MBR partition table on EFI systems, windows can only be installed to GPT disks."
Windows 7 Ultimate 64bit INTEL 3930K 2 x GIGABYTE HD6970 CORSAIR Dmntr 4X8/32gb DDR3/1600 WD 2TB CAVIAR BLACK 64MB/7200PRM CORSAIR FORCE 3 120GB SSD ASUS P9X79 DELUXE MB CORSAIR H100 COOLER CORSAIR HX1050W
clean install to mechanical not SSD so you can use ASUS software once WIN 7 installed to merge them with the "Marvell 9128 6GB port"...Regarding BIOS funnily enough I have seen images of the UEFI BIOS in forums with all 8 ports on the deluxe in SATA configuration in advanced settings however mine only shows six (and no duplicate for UEFI like other images of UEFI i've seen"?and I have updated the UEFI BIOS to the latest version..
I have an external 3TB hard drive, USB. I used a mac to partition it, 2.25TB is HFS+ (Mac OS extended - journaled) and the other is 490gb NTFS (to use on windows). It would not give me the option to use MBR (master boot record) so i used the GUID table. It works fine on macs, but windows tells me i need to reformat it. It is my understanding that most all 64bit versions of windows can read/write a GUID disk. I do not need to boot off of the drive. this is another addition to the list of "why i hate windows"
About a week ago I tried to install Cyberlink Power DVD 10.I kept getting error message 1625,this installation not allowed due to system policy. I've gotten conflicting solutions and still no luck. As of today I tried messing with the registry and local policies etc...long story short, I cannot get past my "Starting Windows" window. It powers down, then powers back up and gives me the options of 'start windows normally' or 'repairs'. It will not start normally nor can it repair the problem. Have I done something heinous and can it be reversed? Is there a way to get it into safe mode, back to my desktop so I can restore the backed up registry.
so i installed new bios software for my compaq laptop from the offical site (exidently i wanted to install new wireless network adapter drivers but i didn't read carefull enough) and now my laptop starts up i see the light burning and hear him running and everything but my screen isn't showing anything. From the biggining my screen stays black and i can't enter anything, i got a backup on a external harddrive and there is also a backup from compaq itself on a partition with vista on it. But i have no single clue on how to acces them with a black screen.
so i've had this problem before but this time i want to handle it myself, so i have these wierd dots on the screen, Where it used to be white its not pink dots, and where it used to be black, it's green.i can still use my computer, but it's really annoying.i tryed to use Acer eRecovery but that didnt work.
I bought a Toshiba laptop running Windows 7 2 years ago and icons on the desktop are changing. What I mean is that, say for example, if I have a PDF on my desktop, it will show a thumbnail of the PDF and the Adobe logo in the bottom right corner.The Adobe logo changed to a different logo. This also happened with every file, PowerPoint icons on the bottom of thumbnails changing to Windows Defender icons.I have had an outdated Sophos running on it since I got it as well ad Windows Defender, then 2 years later I bought a Norton disc and that's up-to-date right now. None of the antivirus programs have detected anything.Could you guys please tell me if there is any viruses that do anything like what I am experiencing, because I feel uncomfortable knowing that there might be a virus on my computer.
Partitioned that drive, installed Windows 7 Beta on D:
Bought a second hard drive
Partitioned it to to drives, E and F
I just bought the Windows 7 Pro Upgrade, made a fresh install on E: with the hopes that it would change E: to C: like the beta did on my primary drive.
It didn't, now my drive lettering looks awful and it's confusing me lol.
I don't need the Windows XP or the Windows 7 Beta installation (on disk0), I would like to combine those partitions back into 1 drive.
Is there any way I can fix this mess? maybe make my current windows location C: ?
So today, (9/9/2011) I noticed my Catalyst Control Center had an update from my version 6 to version 8. So I clicked install and all of a sudden my screen resolution get messed up. Now when I switch to my default resolution 1920x1080, my taskbar gets covered 80%. Now I'm using 1680x1050; my taskbar isn't covered now but when I start up the browser, I can't see the scroll bar on the right and the top part is covered a little now.
Today I installed some updates and right before they were over the screen got all big. I restarted now its like this always.. I have gone and tried changing the screen solution (right click desktop and doing it that way) but it just makes everything look small and nothing like what it was originally.
I have windows 7 and a realtek HD soundcard which supports 5.1 with dolby home theatre.I bought the logitech x530 5.1 surround sound speakers and when doing the test int he realtek control panel, the sounds for the front speakers are coming from the rear speakers and visa versa. I double checked the manual and I have them in the right place.Is there anything I can do to fix? (apart from switching the front speakers with the rear speakers. As the wires on the front speakers are shorter than thoses for the front so they don't really reach.
i've been having problems with folders sometimes i can't delete them saying i don't have permission when i'm the admin.i did some research and used a program lockhunter to see what is locking the folder and it came up with svchost. it wouldn't unlock it though.it seems that security permissions is messed up some how and i can't figure out how to fix it.
Just got in some new Dell Latitude ST tablets at my work. We used WDS for our imaging process. Problem is these new Dell ST's do not have support PXE on the nic's.
How can I create a wim image of the tablet that I have built? I have a bootable USB key all built and I can switch out the wim, I'm just not sure how to capture a wim of the tablet without the WDS.
This seems to happen to me a lot, from what seems to be games. Researching some more, It could be resolution changes (seeing as it also happens when I plug another monitor in) however, I can't find a fix (other than at that link, but I don't want to install software I haven't heard of, much less an antivirus as it may come in conflict with MSE)
During the day I clicked on a link saying I needed to check for updates or restart my computer. Don't remember exactly which program it was or in what order.
However, now when my computer starts up my desktop has reverted to some default desktop which is misssing a lot of my icons I had previously. Some of my shortcuts are still there, but most are missing.
I purchased a 1 TB Seagate Hard Disc about four months ago.It has two Partitions One 50 GB with Windows 7 New and other a 950 GB with movies,music important documents etc.I also have two more Internal Hard discs with Windows 8 and another windows 7.For last one week or so had problems in booting into new Windows 7 got message that it should be repaired through Windows DVD.Did the needful and booted up.The next day same problem and my action the same. This happened about 7 times or so.Today same problem.My reaction the same.But while booting I got a message that the 950 GB partition cannot be accessed because MFT is corrupt.Browsed through Windows 7 Forums and as advised in one of the threads downloaded Testdisk.Ran the program but unfotunately the dreaded message that both MFT and Mirror MFT are corrupt.Have lot of badly needed Data and I really want to recover it.
until recently I had a ubuntu/Windows 7 dual boot. i got a laptop with ubuntu so i decided to remove it from my pc. after that i had tremendous problems as grub decided to delete my partition table. anyway i got that fixed.so i have 3 hdd's in my pc. 1x 500gb sata, 1x 500gb ide & 1x 1tb sata. i did a fresh install after my boot problem, everything was fine again until today. i installed windows on drive c: on my 500gb sata hdd. the 1tb sata is for data, the ide will be used as a network hdd.so as i turned on my pc today, it didnt boot and just showed a prompt. so i booted from another drive. to my surprise i got a grub command line despite me uninstalling it and doing a fresh install.anyway i booted into the recovery dvd, did startup repair without sucess. so i looked around cmd to find that now my windows partition got assigned the drive letter.i dont know if i recall correctly but i think my teacher said that Windows 7 can only boot from c:. so i think that this is basically my problem.how do i get drive d: to show up as c: again? please npte that i CANNOT boot into windows
