so i installed new bios software for my compaq laptop from the offical site (exidently i wanted to install new wireless network adapter drivers but i didn't read carefull enough) and now my laptop starts up i see the light burning and hear him running and everything but my screen isn't showing anything. From the biggining my screen stays black and i can't enter anything, i got a backup on a external harddrive and there is also a backup from compaq itself on a partition with vista on it. But i have no single clue on how to acces them with a black screen.
About a week ago I tried to install Cyberlink Power DVD 10.I kept getting error message 1625,this installation not allowed due to system policy. I've gotten conflicting solutions and still no luck. As of today I tried messing with the registry and local policies etc...long story short, I cannot get past my "Starting Windows" window. It powers down, then powers back up and gives me the options of 'start windows normally' or 'repairs'. It will not start normally nor can it repair the problem. Have I done something heinous and can it be reversed? Is there a way to get it into safe mode, back to my desktop so I can restore the backed up registry.
so i've had this problem before but this time i want to handle it myself, so i have these wierd dots on the screen, Where it used to be white its not pink dots, and where it used to be black, it's green.i can still use my computer, but it's really annoying.i tryed to use Acer eRecovery but that didnt work.
I bought a Toshiba laptop running Windows 7 2 years ago and icons on the desktop are changing. What I mean is that, say for example, if I have a PDF on my desktop, it will show a thumbnail of the PDF and the Adobe logo in the bottom right corner.The Adobe logo changed to a different logo. This also happened with every file, PowerPoint icons on the bottom of thumbnails changing to Windows Defender icons.I have had an outdated Sophos running on it since I got it as well ad Windows Defender, then 2 years later I bought a Norton disc and that's up-to-date right now. None of the antivirus programs have detected anything.Could you guys please tell me if there is any viruses that do anything like what I am experiencing, because I feel uncomfortable knowing that there might be a virus on my computer.
Partitioned that drive, installed Windows 7 Beta on D:
Bought a second hard drive
Partitioned it to to drives, E and F
I just bought the Windows 7 Pro Upgrade, made a fresh install on E: with the hopes that it would change E: to C: like the beta did on my primary drive.
It didn't, now my drive lettering looks awful and it's confusing me lol.
I don't need the Windows XP or the Windows 7 Beta installation (on disk0), I would like to combine those partitions back into 1 drive.
Is there any way I can fix this mess? maybe make my current windows location C: ?
So today, (9/9/2011) I noticed my Catalyst Control Center had an update from my version 6 to version 8. So I clicked install and all of a sudden my screen resolution get messed up. Now when I switch to my default resolution 1920x1080, my taskbar gets covered 80%. Now I'm using 1680x1050; my taskbar isn't covered now but when I start up the browser, I can't see the scroll bar on the right and the top part is covered a little now.
Today I installed some updates and right before they were over the screen got all big. I restarted now its like this always.. I have gone and tried changing the screen solution (right click desktop and doing it that way) but it just makes everything look small and nothing like what it was originally.
Im having some problems putting windows 7 on my iMac. At first, it worked fine. But i lost the reinstall disk so i made an image backup on my external hard drive. Before, i was triple booting Ubuntu, OS X, and Windows 7. I had a huge problem in windows so i restored from a backup. But now, my bootloader rEFIt keeps trying to change my mbr. whenever i try to, it makes windows unbootable. I have the MBR contents, and i noticed that it says theres 2 NTFS partitions. and when i try to install ubuntu, it wants to format the NTFS Partition and delete windows. Is there a way to fix it so i can have all three booting?
I have windows 7 and a realtek HD soundcard which supports 5.1 with dolby home theatre.I bought the logitech x530 5.1 surround sound speakers and when doing the test int he realtek control panel, the sounds for the front speakers are coming from the rear speakers and visa versa. I double checked the manual and I have them in the right place.Is there anything I can do to fix? (apart from switching the front speakers with the rear speakers. As the wires on the front speakers are shorter than thoses for the front so they don't really reach.
i've been having problems with folders sometimes i can't delete them saying i don't have permission when i'm the admin.i did some research and used a program lockhunter to see what is locking the folder and it came up with svchost. it wouldn't unlock it though.it seems that security permissions is messed up some how and i can't figure out how to fix it.
This seems to happen to me a lot, from what seems to be games. Researching some more, It could be resolution changes (seeing as it also happens when I plug another monitor in) however, I can't find a fix (other than at that link, but I don't want to install software I haven't heard of, much less an antivirus as it may come in conflict with MSE)
During the day I clicked on a link saying I needed to check for updates or restart my computer. Don't remember exactly which program it was or in what order.
However, now when my computer starts up my desktop has reverted to some default desktop which is misssing a lot of my icons I had previously. Some of my shortcuts are still there, but most are missing.
until recently I had a ubuntu/Windows 7 dual boot. i got a laptop with ubuntu so i decided to remove it from my pc. after that i had tremendous problems as grub decided to delete my partition table. anyway i got that fixed.so i have 3 hdd's in my pc. 1x 500gb sata, 1x 500gb ide & 1x 1tb sata. i did a fresh install after my boot problem, everything was fine again until today. i installed windows on drive c: on my 500gb sata hdd. the 1tb sata is for data, the ide will be used as a network hdd.so as i turned on my pc today, it didnt boot and just showed a prompt. so i booted from another drive. to my surprise i got a grub command line despite me uninstalling it and doing a fresh install.anyway i booted into the recovery dvd, did startup repair without sucess. so i looked around cmd to find that now my windows partition got assigned the drive letter.i dont know if i recall correctly but i think my teacher said that Windows 7 can only boot from c:. so i think that this is basically my problem.how do i get drive d: to show up as c: again? please npte that i CANNOT boot into windows
Recently I was setting up a VPN client (PacketIX), and the setup wizard suggested some Audio/Video Streaming "Optimization" tweaks. I didn't pay attention and confirmed.Since then, I often hear some crackling / popping noises. For instance, this systematically occurs when I Alt/Tab between a running game and my desktop.An obvious guess is that the damn VPN client messed up some sound settings, but I can't figure out what to do. I've found a good deal of DPC latency workarounds around here which I tried in vain.
I was trying out the admin permissions for my external drive and I messed up. It took all of my privileges away and I wasn't able to access it at all. I was able to get some of it back, but I am still having problems getting full control of the drive. I am seeing a pad lock on the first tier of folders. How do I remove that padlock showing?
I have a 2005 Windows Vista, and it may seem old, but I need to for school. When I start up my laptop it does the normal loading screen, then a different screen appears.
I have a Seagate ST9833A 75 GB hard drive, which I took to a friend's to copy some files. After coming back to my computer, all my folders are missing! When I checked with RECUVA, it shows them as .ink files, which when I recover avast stop me by reporting as a Trojan(LNKBADDST-AC). When I tried typing the address in the bar, It does go to the folder, but sadly Now I can't delete any of them to save space! Can i recover the folders?
Today I installed SP1 in Win 7, and lost my widescreen (1920x1080) resolution which appeared automatically upon Win install. I have a Philips 244E WS LCD, and the resolution I have right now is the max I can choose from at1280x1024, which makes the screen look "Squoozshed" and gives me a headache to look at! I tried installing the NVIDIA drivers but they made no change in the resolution. I have the GeForce 6600 GT card btw.
Okay, so it's been over a year, and my 6cell battery is beginning to die out. I ordered a replacement battery from eBay rather than Dell. I'm a college student, and paying $50 sounded better than paying $200. Anyways, I bought a 9cell battery for my XPS. So here's what happens when I plug in the new battery:
AC Charger with NO battery: Computer runs perfectly fine
AC Charger with battery: Computer runs perfectly fine
Battery with NO AC charger: Problems...
When I plugged in just the battery alone, I went into BIOS and saw that the system's date and time were screwed up; it was showing some weird date in the year 1901. With this new battery, sometimes the hard drive wouldn't load. For example, when I turn my computer on, I can hear the hard drive spinning, but after a couple of seconds, the whole system just...freezes.
I initially thought it was a problem with my hard drive, since a screen kept coming up saying that some of the Windows files were corrupt. I did a clean install of Windows 7, and even tried Vista, but still nothing. With Vista, the date and time would still mess up, and sometimes nothing would load. I even tried system restoring after booting from the CD drive, but I received an error message that I had no shadow copies to restore from. I tried starting up with another hard drive, but still had the same issues.
Right now I'm using my old battery, and I get the message "Consider Replacing Your Battery." Can anyone help shed some light on this issue? Does the problem seem to be with the new battery?
The icon for my USB External Hard Drive (labeled as USBEXT) is messed up. In the Send To context menu, as well as in the Computer folder, and the sidebar of Windows Explorer, it shows up as if the proper icon is missing?
Anyone know of a possible solution? Just the default drive icon next to the label would be nice but I'm also wondering how I could customize all of the icons in Windows 7 for hard drives, folders, music files, etc. I remember there were programs that did such things in previous versions of Windows and didn't know which of them, if any, would work with Windows 7 (Build 7077).
We purchased a HP Pavilion p6242f Desktop with Windows 7 in late December 2009. The computer was set up by the store tech who among other things downloaded and installed Window Live Mail now that Outook Express is no more.We are having persistent problems with the keyboard in Live Mail only. If you enclose certain characters in ( ) or " ", you get stupid emoticons or strange letters with peculiar accent marks. The tech came back and checked: the language is set to English/US Canada. He couldn't find the cause. I have read a similar complaint on Microsoft's Vista Forum but didn't see a solution. This is a brand-new computer: why is this happening?
I have HP laptop with windows 7 ultimate. Sometimes my keyboard is messed up (i.e. typing letters shows numbers) and after restart or log off and log in again, the keyboard goes back to normal. The problem has repeated several times and I don't know the reason
I had Windows 7 Prof. 32 Bit version installed on C. I had two more volumes D and E.So i needed one more volume therefore i shrinked the D and took 16 GB from it and made it new volume as NTFS formatted drive M. When doing it windows showed some warning that "you wont be able to boot except from your current installation" I cant remember exactly.After that the colour changed from blue to geenish yellow.When i restarted the windows logo started and the system crashes and BSOD with STOP Error : 0x0000007b (0x80786B58, 0xC000034, 0X0000000, 0X0000000)I ran diskpart Here are the results:My all 4 partition had become dynamic and i think this is the reason that windows wont boot.
I had a Vista computer that crashed. It wouldn't start up. Figured I would try to install Windows 7 on top of the Vista installation. I read that a custom installation would save the old contents in and Windows.old folder, including the user profiles. However, after custom installation the windows.old folder is there, but my Vista profile is gone. Probably because it was password protected. I figured I would be able to find it and elevate my privelegies in Win 7, but seems not. It still seems the harddrive is full of my old information(alot of GB's are used). Is there any way to recover the information? I know the old password and all that, just can't find the information. (Also tried to search for exact file and folder names but they cannot be found).
I've been working for the past week to try and figure this out :*( please help me out, don't ask about the name, couldn't get it to take any normal names at the time.
I don't know exactly what is happening with my computer but since the guild wars 2 beta weekend my computer would freeze make a very loud scratching sort of sound than the client would crash. At first I figured ok its just beta something isn't happy with my system, I figured it was just that cross fire wasn't optimized for the beta and that my 5970 had some cross fire structure to it with the dual gpu. Than while playing Sniper Elite v2 it happened again, not to the full extent of the loud noise but still there was scratching. After each time the games would crash all my other programs would crash as well, and when they did work they would be screwed up. I would try playing music and it would sort of work than have the static or scratching sound again, occasionally a beeping sound.
I have my audio drivers up to date and I have tested it out threw my screen speakers and my razer megalodon usb head phones. I have checked for a new mobo bios and haven't found anything new for it, I than checked to update my graphic drivers and brought them up to 12.4. I don't run anything but the drivers due to it making my system very unstable. I than did a complete wipe, did 8 passes over both my base hard drive and my 1 tb hard drive. Fully updated windows and my drivers again and I am still experiencing the same problems. I have my video card over clocked to 900 core clock and 1200 memory at 1.137 volts, its stable as can be. I also have my cpu over clocked to 3.7 ghz but I have never had a issue with it either, they both have been at these speeds for the past 2 years. The temps are all with in more than safe temps and I have just recently cleaned the entire computer.
Just finished doing memtext86+ for 5 passes and came up with 0 errors, I have also checked inside my event viewer logs for any critical events and can't find any.My system specs according to speccy:
Operating System MS Windows 7 Ultimate 64-bit CPU AMD Phenom II X6 1090T Thuban 45nm Technology RAM
Firefox, Steam, Filezilla, Skype all work.IE, Chrome, Evernote and others all dont.Windows Network Diagnostic tool says: Windows could not automatically detect this network's proxy settings..Its not a virus or malware, its likely because i removed registry keys related to old web filtering software.In the Internet Options settings it is set to automatically detect settings and no proxy server is set.
I have an ASUS M4A785TD-V EVO motherboard in my pc running Win7 x64. I had been having an unrelated issue with a blue screen, and updated the BIOS using the EZ Flash option in the BIOS itself to update drivers to the most current on the ASUS website. After that was completed, I was able to get the computer to boot, but had no Network Connections available when I got into Windows. Upon checking the Device Manager, I found that the driver was marked with the yellow ! and it was giving Error Code 10 (device failed to start).
I have found that this error is typically associated with driver issues, but I've installed every driver I can find from the ASUS and Realtek sites, as well as attempted to roll the BIOS to an earlier version. I already have made sure that the NIC is enabled in the BIOS. I actually finally got fed up and decided to risk a reformat, and alas, still no network connection.
When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
