Windows 7 Drive Letters Messed Up?
Oct 26, 2011
until recently I had a ubuntu/Windows 7 dual boot. i got a laptop with ubuntu so i decided to remove it from my pc. after that i had tremendous problems as grub decided to delete my partition table. anyway i got that fixed.so i have 3 hdd's in my pc. 1x 500gb sata, 1x 500gb ide & 1x 1tb sata. i did a fresh install after my boot problem, everything was fine again until today. i installed windows on drive c: on my 500gb sata hdd. the 1tb sata is for data, the ide will be used as a network hdd.so as i turned on my pc today, it didnt boot and just showed a prompt. so i booted from another drive. to my surprise i got a grub command line despite me uninstalling it and doing a fresh install.anyway i booted into the recovery dvd, did startup repair without sucess. so i looked around cmd to find that now my windows partition got assigned the drive letter.i dont know if i recall correctly but i think my teacher said that Windows 7 can only boot from c:. so i think that this is basically my problem.how do i get drive d: to show up as c: again? please npte that i CANNOT boot into windows
View 8 Replies
ADVERTISEMENT
Sep 8, 2012
I have HP laptop with windows 7 ultimate. Sometimes my keyboard is messed up (i.e. typing letters shows numbers) and after restart or log off and log in again, the keyboard goes back to normal. The problem has repeated several times and I don't know the reason
View 1 Replies
View Related
Nov 9, 2009
I was trying out the admin permissions for my external drive and I messed up. It took all of my privileges away and I wasn't able to access it at all. I was able to get some of it back, but I am still having problems getting full control of the drive. I am seeing a pad lock on the first tier of folders. How do I remove that padlock showing?
View 2 Replies
View Related
Apr 2, 2012
I have a Seagate ST9833A 75 GB hard drive, which I took to a friend's to copy some files. After coming back to my computer, all my folders are missing! When I checked with RECUVA, it shows them as .ink files, which when I recover avast stop me by reporting as a Trojan(LNKBADDST-AC). When I tried typing the address in the bar, It does go to the folder, but sadly Now I can't delete any of them to save space! Can i recover the folders?
View 1 Replies
View Related
Apr 15, 2009
The icon for my USB External Hard Drive (labeled as USBEXT) is messed up. In the Send To context menu, as well as in the Computer folder, and the sidebar of Windows Explorer, it shows up as if the proper icon is missing?
Anyone know of a possible solution? Just the default drive icon next to the label would be nice but I'm also wondering how I could customize all of the icons in Windows 7 for hard drives, folders, music files, etc. I remember there were programs that did such things in previous versions of Windows and didn't know which of them, if any, would work with Windows 7 (Build 7077).
View 3 Replies
View Related
Jun 22, 2011
I have a general question about how windows assigns drive letters. My son has a Dell laptop with Windows 7. First of all, the card reader works fine. However, I thought the drive letter was always fixed for the sd card reader. When he inserts a micro sd card and adapter in the slot, it pops up the windows info box with the header stating Secure Digital Card F:/. All is well. When he inserts a different micro sd card and adapter in the same slot, it pops up the info box with the header Secure Digital Card G:/. I don't understand the different drive letters. These are identical 2gb micro sd cards. The reason I ask is we are writing an application that stores the sd card drive in a local sqlite database upon initialization of the application. If the drive is not consistent it basically messes up our application.
View 2 Replies
View Related
Sep 11, 2010
I just installed Win 7, clean install, on a second HD. On the original drive C:, I have Vista, on the new drive with Win 7, drive letter K:. This is all fine if I boot Vista but when I boot Win 7 (I use F12 with Dell) the drive letters are changed. K: becomes C: and C: becomes D:. When I tried to change the drive letters back so C: becomes K:, it will not let me. I spent most of the day setting up to install Win 7.
View 2 Replies
View Related
Oct 8, 2012
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies
View Related
Aug 8, 2011
I encountered a pretty bad error, but I feel like it's only because when transferring over my system image it did so by going from C --> to D. I've spent hours Google searching and burning bootable discs to no avail. What I've found out is that Partition Magic seems to be the only software in the universe that can change your drive letters around. I tried changing the drive letters through something in Windows DOS in Windows Recovery but that didn't work on the reboot. Supposedly, the Partition Magic CD itself is bootable, but to create a bootable CD from scratch it's a downright nightmare.
View 12 Replies
View Related
Jul 20, 2010
my Windows 7 recently quit assigning drive letters automatically. I frequently plug in new hard drives to the system using various USB to IDE or SATA adapters and now when I plug in a new hard drive with any of these USB adapters, it does not get a drive letter assigned to the volumes on the drive. If I go to Disk Management, the drives show up, and so do their partitions, and I can manually assign a drive letter to it, but this gets rather tedious. Any idea why it quit doing it automatically and how to get it to automatically assign drive letters once again?? I figured maybe it ran out of letters, so I went in the registry to HKEY_LOCAL_MACHINESYSTEMMountedDevices and deleted all the remembered drive letter assignments in there, but that didn't help any.
View 7 Replies
View Related
Mar 29, 2012
Been using Transferer to move photos from my cameras via USB to my computer (64-bit Windows 7 Home Premium SP1), but Transferer stopped working suddenly because it requires drive letters for the camera cards, which no longer appear in Windows Explorer, which does show the cameras listed as drives but without drive letters. I can transfer photos manually. My cameras don't seem to have a mass storage mode.
View 6 Replies
View Related
Apr 22, 2009
Might not be a problem for a lot but I'm beginning to run out of letters for Networking disk drives on Windows systems. Once you start sharing multiple CD / DVD devices and multiple external devices (USB sticks, Ipods etc etc) and have may be 12 - 14 Virtual machines together with a decent TEST Bench set of real machines all up and running in a computer test lab this becomes a real pain.
Isn't it about time to get rid of the C: type nomenclenture (originated way back in the 8 bit Intel 8086 MS DOS days or even before).
Even the UNC system is pretty OK (
amemount) .
I'm not sure what type of change would be needed to the file system but IMO the change is LONG LONG overdue. Why on earth we are still stuck with this system which has been around "Since Pontius was a Pilot" I can't imagine.
It really wouldn't be a major problem to be compatable with earlier systems -- you could easily have a simple internal map say references to C: would be replaced by Mountpoint whenever the I/O was requested. Overhead would be very small.
(In any case it's really time to change the NTFS system -- but that's another topic entirely which would be a bit more complex).
View 9 Replies
View Related
Jan 30, 2009
In XP and Vista following registry fix made the drive letter of all drives appear first, in front of the drive label:
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionExplorer]
"ShowDriveLettersFirst"=dword:00000004
Unfortunately this setting doesn't seem to work any longer in Windows 7's Explorer, and the drive letters remain at the end.
Does anybody know of a working method?
View 6 Replies
View Related
Jun 18, 2009
Actually my computer is equipped with a 300GB drive as boot-device with two equal sized partitions on it to alternatively boot either Vista x64 (default at the moment) and Windows 7 x64 alternatively.
It depends on which OS I boot, how both partitions get drive letters assigned:
If I boot into Vista, the Vista partition gets drive letter C:, and the Windows 7 partition gets drive D:
If I boot into Windows 7, that partition gets drive letter C: and Vista will become the D: (Just switching)
But now I start to use EasyBCD 2.0, the Beta version, in Windows 7: After updating from Windows 7 Build 7100 to 7229 it shows me booting Vista from drive D: and Windows 7 from drive C:
Before I did the update, the regular EasyBCD 1.72 shows when Vista is booted, to boot Vista from drive C: and Windows 7 from drive D:
Is there anywhere out there a simple description on how the drive letters of startable devices are allocated?
What about drive letters in BCD?
View 1 Replies
View Related
Apr 5, 2011
Is it possible to swap drive letters around? I want to swap the C: drive to be the F: drive, is this possible?
View 4 Replies
View Related
Sep 12, 2010
I would like to change the letters of my 2 DVD drives to X and Z but I can't find a way to do it. There is a way because I read some one doing it.
View 3 Replies
View Related
Apr 12, 2009
Is it normal when installing Windows 7 that it installs itself on 'C' Drive and moves XP from 'C' Drive to 'D' Drive even though it appeared to be installing on 'D' during installation?
View 9 Replies
View Related
Oct 31, 2011
sing the same disk drive letters for more than three years. Suddenly the other day, when I started the computer many of the disk drive letters had changed. I used Computer Management to change them back to where they were but when I rebooted the computer, they had changed back to where they were before I made the changes
View 6 Replies
View Related
Dec 24, 2012
[code]...
On my taskbar are five removable drives labelled H,W,X,Y and Z. I have no idea what storage device each of these drives is referring to. I would like to use the letter H to label a HDD. When I open disk management however (my computer>manage>disk management) none of the removable drives are shown.I have tried reading an assortment of USB sticks, phones and mp3 players but none of them show up as H. How can I change the drive letter of a removable drive?
View 1 Replies
View Related
Dec 24, 2012
Intel Core i7 CPU 950@3.07GHz 3.81GHz 12Gb RAM ATI Radeon HD 5770
Monitor 1 - BenQ2400W (Landscape) Monitor 2 - BenQ2400W (Portrait)
Win 7 Pro 64bit: Epson Stylus Photo R1900.
On my taskbar are five removable drives labelled H,W,X,Y and Z. I have no idea what storage device each of these drives is referring to. I would like to use the letter H to label a HDD. When I open disk management however (my computer>manage>disk management) none of the removable drives are shown.I have tried reading an assortment of USB sticks, phones and mp3 players but none of them show up as H. How can I change the drive letter of a removable drive?
View 9 Replies
View Related
Jun 14, 2009
Vista Ultimate 64bit / Windows 7 Ultimate RC1 64bit
I successfully installed Windows 7 on a blank drive. The installation kept the drive letter "H" and name.
Drive C: Is my Vista boot drive, and I'm done with it. My plan is to change it to some higher letter of the alphabet, then .
Question I
If I change my "G" drive (Windows 7 boot drive) letter to "C" with 'Disk Management' will all be well?
Question II
Will just deleting my Vista installation cause any problems with the Windows 7 installation?
View 5 Replies
View Related
Jan 22, 2013
I had Windows installed to the first partition on my drive (which is C:) and after a few years now it's gotten full of software I don't use anymore and the like. Rather than install Windows over it and starting over, I decided to install to another partition and get everything set up before doing away with the old one.
I got Windows installed and mostly everything I use installed and working. My plan was to create an image of this copy and clone it back to the original partition. That was my plan until I realized I had screwed up majorly. The second installation of Windows says it's installed to F: (I'm not sure why, since I thought each version of Windows installed sees itself as C:). Maybe because I started the installation from the other copy of Windows instead of booting straight to the install CD.
Now my question is... Is there any way to make this copy think of the drive it's installed on as C: or will I be stuck cloning it to a drive labeled F:? Thinking about it, it doesn't seem possible considering everything is looking to F: instead of C: on this installation.
Here is an image of my drive setup. C: is the old copy (where I want F: to go) [URL]
View 10 Replies
View Related
Oct 31, 2009
I have two HDs; on the first one (80 GBs), I have four partitions, with XP on C: (and this is the boot drive), then D:, E:, and finally Vista on F:. I have another HD, a 1 TB one, which I use for storage, and I have made a lot of partitions on it, generally about 100 GB each. When I ran the setup for 7, I selected a partition on the second drive which was labelled S:. After 7 installed, and I opened My Computer, I saw that everything was messed up, and 7 was now on C:.
I know it doesn't mean it is physically on C:, it is still on the same partition of the second HD where I installed it, but it shows its partition as C:. I used Computer Management to change most of the drive letters so that they appear as they do in XP, but every time I try to change the drive letter of 7 from C: to S:, it gives an error, something about not allowed to change drive letter of system disk which has the pagefile.
So is it at all possible to force change the drive letters so that 7 is shown on S: and XP on C:. I opened C: (the 7 installation) and found many text files in system folders and program files which point to locations on C:, so if I force a change from C: to S:, what happens to all of these - do they automatically change their paths to S:, or does the whole thing just go phut!
I had the same problem when I installed Vista, but I didn't use it all that much, and so I didn't do anything about it, but I like 7, and unlike Vista which everyone said was an intermediate product until the next version came out, 7 is here to stay. I am ready to do another clean install if there is any way around this problem.
View 1 Replies
View Related
Jun 18, 2012
I use 3 USB sticks to backup data on a Win 7 machine
-Stick 1 does M,W,F
-Stick 2 does Tu + Th
-Stick 3 does Sun
I am having problems assigning them all to the same drive letter.I have tried assigning them individually in Disk Management to M: , which happens but as soon as the 2 of the sticks gets removed and put back in they go back to either H or G.I have looked at this thread and the registry fix didnt help either. Drive Letter - Add, Change, or Remove in Windows 7.I need all 3 sticks to be given the drive letter M and to keep it. (obv only 1 stick is in at a time.)
View 3 Replies
View Related
Jun 14, 2009
1. My machine has XP on a single hard drive w/ 3 partitions. In order to try Windows 7 the easiest thing for me to do is to install it on my E: partition. If I boot into Windows 7, do the drive letters change around or do the Windows 7 system files still show up as E:WINDOWS?
Are there any downsides to this installation that I don't know about? If I got tired of Windows 7 would it be a problem to get rid of the bootloader?
2. My original plan was to buy a second hard drive, install it by itself, and load Windows 7 onto it. Then reconnect the original hard drive and dual boot by changing the boot order in the BIOS. What does this do to the drive letters?
I would have one hard drive with 3 partitions and another hard drive with one partition. If I boot Windows 7 I'm guessing that its hard drive would become C: and the other hard drive would become D:, E: and F:. But what happens if I boot XP from the other hard drive? Does it stay C:, D: and E: and the second hard drive becomes F:, or do the letter scramble differently?
View 3 Replies
View Related
Sep 10, 2009
A few days ago I decided to install windows 7 7100 on my newly built desktop, unfortunately a day later i get an error called 651, i looked around and found out that it is a bug so i am resorting to a more stable os (vista...but only for now) and i am trying to boot it from daemon tools becuz my dvd copy has trouble booting, but every time i try to install it, it keeps trying to install the OS on my system partition and gives me an error that says there is not enough space available.
So my question is, how can i change the default drive letter that windows 7 gives to Daemon Tools?
View 9 Replies
View Related
Jan 6, 2010
Decided to install Windows 7 Pro today but when the install completed, I noticed my drive letters were out of order.
Previously, my partition drives when running Vista Home Premium were
C: System
D: Recovery
E: Apps
F: Data
Now its automatically changed to
C: System
D: Apps
E: Data
F: Recovery
My HP Recovery partition jumped down the list and changed from D to F and shifted the letters of the other drives as well. I have no idea why it changed on its own as I only installed Windows 7 in drive C. The Recovery drive is the 2nd fullest driver on my HD behind C Drive.
Is this normal? Is there a fix for such a thing?
View 1 Replies
View Related
Feb 1, 2009
How to Show Windows 7 Computer Drive Letters Before or After Drive Name ?
View 0 Replies
View Related
Jan 2, 2012
My C: drive only has 45.4GB TOTAL. While I have two other drives, D(has 2TB) and E(has 500GB). My problem is, everything is installing into C drive automatically. How do I change this?
- I tried switching the drive letters but there's always the "Parameter is incorrect" error(probably because they run the computer).
-Tried going to regedit and editing microsoftwindowscurrentversionprogramfilesdir (also tried editing other files but I attempted to install a program, did not change the installation directory)What do I do? I can't install any program that automatically installs into C drive (for example skype).
View 9 Replies
View Related
Aug 6, 2012
It is impossible for me to put the drive letters in partition wiZard (booted from cd) on recovered, none of them have a drive letter
Change letter option is greyed out
View 6 Replies
View Related
Dec 30, 2009
Well, I did a dual-boot system with Vista 32-bit and 7 64-bit. Now the problem is that, when I'm in Vista, the drive letter of Vista would be C: and 7 would be in B:.
But when I'm in 7, its partition would have the letter C: while Vista would have B:.
Is this normal? What would happen if I installed a program on the path C: in Windows 7?
View 4 Replies
View Related
