Basically while I was running Windows 7 I wanted to clone my 149GB Hard Drive to a 500GB partition on my 1TB HardDrive, with Ubuntu taking up the other 500GB.
I coulnd'nt clone using Windows tools because I always had an error of some sort. I then tried cloning using various Ubuntu tools on the Live CD - these didnt work either. I then tried dd if= of= command and it copied about 50% before an I/O error.
After the dd failed I tried booting Windows 7. The boot manager gave me 2 options. Win 7 ultimate and win 7 ultimate (recovered) win 7 ultimate never booted, because it was the new-er, half-cloned HD. The other windows loaded but was bugged, had to manually run explorer etc.
I just recently fixed my laptop a while back ago, and now I am having problems again.I was drawing on my laptop and I received an update for Flash Player. Well, I started to update and as soon as I clicked start, I went back to drawing.30 seconds later, with no warning whatsoever, My computer was closing all my programs, and restarted itself with out a prompt. However, when it did reboot, I got a message saying Invalid Partition Table.So, i was like wtf, like any person. I tried rebooting and going into safe mode. It wouldn't let me. AT ALL. The f8 function does not work. actually the only functions that do work is f2 for setup and f12 for boot options
I am running a small network at my house, and I have a Win2003 server that seems to have problems. It doesn't boot anymore. One suggestion was to take the hard disk, connect it to another computer and work on it. Ok, so I did that. Took the HD from the 2003 machine, got a connection kit for USB and connected it to my Win7/64 notbook. Of course, that blew up my notebook-When I connected the HD, the laptop froze. Obviously, I had not choice but to remove the external hard drive and reboot. The reboot now ends up in a single line: Invalid Partition Table.I have tried the system Recovery Options on the DVD, but the automatic options don't work. So I need to find another way to restore the partition table.
I have a Dell E6410 running 32-bit Windows 7. When I boot the machine with an USB thumb drive attached I get an Invalid Partition Table error. I hold the power button down, remove the thumb drive and then power the machine up. It then boots with no problem.
A few weeks ago my computer turned off unexpectedly while I was using it. When I tried to start it up again, I got a black screen with a blinking cursor. I tried going into BIOS and changing the startup order to no avail. It's now back on default. I also ran the system diagnostic and it said nothing is wrong.I got a Windows 7 repair disk and attempted to use that. I ran the startup diagonosis and restarted-- again a black screen with a blinking cursor. I restored it to an earlier point and restarted-- black screen with blinking cursor. I then attempted to restore it to other points but got an error message (0x8000ffff) each time. Finally, I tried command prompt and did "bootsect /nt60 ALL" which did nothing. So I tried "bootsect /nt52 ALL" which did nothing. I did both of those again with "/force" (which I'm now guessing was a stupid move, but I was desperate to try anything) and now when I restart I get a black screen with "Invalid partition table". When I try to go to system restore now it tells me there are no restore points.
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
Im having some problems putting windows 7 on my iMac. At first, it worked fine. But i lost the reinstall disk so i made an image backup on my external hard drive. Before, i was triple booting Ubuntu, OS X, and Windows 7. I had a huge problem in windows so i restored from a backup. But now, my bootloader rEFIt keeps trying to change my mbr. whenever i try to, it makes windows unbootable. I have the MBR contents, and i noticed that it says theres 2 NTFS partitions. and when i try to install ubuntu, it wants to format the NTFS Partition and delete windows. Is there a way to fix it so i can have all three booting?
l am having a problem with installing due to a disk partition problem.. Im getting an error that says "The selected disk has an MBR partition table. On EFI systems Windows can only be installed to GPT disks".I have no clue and reading other forums it sounded like specific computers were having this problem but I built mine.Had a Windows 7 Ultimate x64 I used from a friend with no Key, Microsoft doesn't like that so I purchased a Key from them for Premium, used a W7 x32 disk by accident and I have 12 GBs of Ram so pretty inefficient.. I downloaded a W7 x64 version and am now having this problem...; First I've down this now bc Microsoft said they would send me a disk in the mail when I bought the Key but that was about 3 weeks ago and I would like to use my computer to its capabilities.
Is it possible to install Windows 7 on a GPT disk?
I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:
Disk 0 Part 1 - 102 MB EFI System
Disk 0 Part 2 - 128 MB MSR
Disk 0 Part 3 - 500 MB Primary
Disk 0 Part 4 - 7446 GB Primary
But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
What gives? I thought Windows Vista and beyond supported GPT.
The problem with MBR is that you can't have a file system larger than 2 TB.
then i tried to install windows 7 ultimate from inside the windows 8.after the end of installtion during completeing step installtion stops responding.and my winddowss not installed andd my previously installed windddow also stops working.and after i tried to install winodw from dvd but after all setting and drive setting when then actual installation strtts .the first step which is coping files completes in 1 sec. and go to second step and stop responding.
I encountered an error that stated:windows can not be installed to this disk the selected disk has an MBR partition table on EFI systems, windows can only be installed to GPT disks."
Windows 7 Ultimate 64bit INTEL 3930K 2 x GIGABYTE HD6970 CORSAIR Dmntr 4X8/32gb DDR3/1600 WD 2TB CAVIAR BLACK 64MB/7200PRM CORSAIR FORCE 3 120GB SSD ASUS P9X79 DELUXE MB CORSAIR H100 COOLER CORSAIR HX1050W
clean install to mechanical not SSD so you can use ASUS software once WIN 7 installed to merge them with the "Marvell 9128 6GB port"...Regarding BIOS funnily enough I have seen images of the UEFI BIOS in forums with all 8 ports on the deluxe in SATA configuration in advanced settings however mine only shows six (and no duplicate for UEFI like other images of UEFI i've seen"?and I have updated the UEFI BIOS to the latest version..
I have an external 3TB hard drive, USB. I used a mac to partition it, 2.25TB is HFS+ (Mac OS extended - journaled) and the other is 490gb NTFS (to use on windows). It would not give me the option to use MBR (master boot record) so i used the GUID table. It works fine on macs, but windows tells me i need to reformat it. It is my understanding that most all 64bit versions of windows can read/write a GUID disk. I do not need to boot off of the drive. this is another addition to the list of "why i hate windows"
HP Pavilion dm3 laptop OS Win7 No cd drive No recovery disks Problem: "Invalid Partition" at start Tried: All the F keys (they might as well stand for "f...ng nothing") nothing works.
Just got in some new Dell Latitude ST tablets at my work. We used WDS for our imaging process. Problem is these new Dell ST's do not have support PXE on the nic's.
How can I create a wim image of the tablet that I have built? I have a bootable USB key all built and I can switch out the wim, I'm just not sure how to capture a wim of the tablet without the WDS.
I purchased a 1 TB Seagate Hard Disc about four months ago.It has two Partitions One 50 GB with Windows 7 New and other a 950 GB with movies,music important documents etc.I also have two more Internal Hard discs with Windows 8 and another windows 7.For last one week or so had problems in booting into new Windows 7 got message that it should be repaired through Windows DVD.Did the needful and booted up.The next day same problem and my action the same. This happened about 7 times or so.Today same problem.My reaction the same.But while booting I got a message that the 950 GB partition cannot be accessed because MFT is corrupt.Browsed through Windows 7 Forums and as advised in one of the threads downloaded Testdisk.Ran the program but unfotunately the dreaded message that both MFT and Mirror MFT are corrupt.Have lot of badly needed Data and I really want to recover it.
I have always loved the FIND command when working with rosters of names on a table for scheduling. This command still works in Office 2010 but I can't shade EVERY table box for the name I've found. AS an exam0ple, if I have "Susie" scheduled for an activity 9 times on the same table in random cells, I can FIND her names on the table, but I used to be able to shade/color in her cells on the schedule.
I am having problems connecting my Win7 Sony Vaio to my existing network. I cannot get the Ip address to add it to the DHCP table using ipconfig /all. I can see my connection but not connect to it because of not being able to add it.
After I used "Acronis Disk Director" in a HirenBoot CD to cut some space from my D drive to my C drive (boot drive), I've got this "Windows is checking the D drive" then "Corrupted master file table. Checkdisk is aborted" on my D drive. After doing some homework, I've tried corrected it by using testdisk's Fix MFT function but "Both of the MFT files are corrupted. Can't fix". I did not back up the whole partition. I do not really want to buy $60 + commercial software that TestDisk recommends just to fix this possibly once-in-a-lifetime issue. However, if recovery softwares is the only option left, then I have to use them.
I have a CHM file stored on the OS harddrive.Whenever I try to click on the table of contents, it tries to download the htm file instead of opening it in the adjacent window. All my other chm files work normally. I'm not sure if a recent windows update did this.
My computer randomly decided to turn off and I figured it was updates, now when it restarts it goes to "device mapping table" I was running windows 7. Anyone know why it might do this and how to fix it?
How can I create a custom command line to be used when I double click on a file with a specific extension. For example for a .jar file I'd like to have this: javaw.exe -jar "%1" -myOpts
Can you have more than one custom command line for an extension and use the RightClick context menu to chose the one you want to use?
My laptop stall for about 4 minutes with this message: "Checking file system on\?volume{70449451-e00a-11e0-8f51-806e6F6e69633. The type of file is NTFS. The Volume is Dirty. Corrupt Master File Table. Windows will attempt to recover Master File Table from disk.
I have installed fresh Windows 7 Pro x64, and Office 2007 Small Business Edition SBE. Every time I try to type my Product key (which I have checked several times and it is correct) I got message saying that my key is invalid. To be honest I am not entierly sure whether I should call Microsoft and explain the whole palava or there is something better.
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
I decided to install Windows7 Home Premium on my HP dc5000 SFF. it installed fine but every time it reboots, I get an error that says..."FATAL ERROR: Failed to locate necessary table(s) to make adjustments. Press any key to continue booting"This only happens when using the "restart" mode. if I use "shut down" and let the computer turn completely off, it will start with no errors!
