Computer Restarts Itself And Get Error Message On Re-boot

Sep 14, 2012

I recently reinstalled windows and now when I leave my computer for about 15mins it will restart itself and then on restart I get the following message:Realtek PCIe GBE Family Controller Series V2.39 (01/24/11) PXE-E61: Media test failure, check cable.PXE-E53: No boot filename received.I tried reinstalling windows again. Updating drivers, specifically the realtek ones.Also when I used my HDMI cable to connect to my TV as a second monitor it works for about 45mins then bluescreens.These all worked properly prior to reinstall.

View 1 Replies


ADVERTISEMENT

Error Message After Computer Restarts Mid Installation

Nov 3, 2012

I was in the middle of the installation of windows and in the formatting the computer restarts himself' and since then i get a message: press any key to boot...error loading operating system. I can't do anything else it's stucks at this point, what can i do to go back to the installation mode? i've tried everything

View 1 Replies View Related

Computer Restarts When Trying To Boot From A Cd?

Jan 24, 2011

im trying to format my computer but the moment i insert the cd in the drive and set in the bios to boot from then the computer restarts and hangs this only happens when their is a cd inside but if i take out the cd then the computer works properly although still having the setting to boot from the cd drive but the moment you put a cd inside to boot then the pc restarts and hangs?

View 3 Replies View Related

Computer Automatically Restarts To Boot From Cd?

Jan 10, 2012

Wen i leave my computer on all night to do like a virus scan or just leave it my computer automatically restarts to boot from cd and i have automatic restart on system failure turned off

View 1 Replies View Related

Computer Restarts Directly Upon Boot Up?

Dec 26, 2012

After taking my hard drive and placing it from my good rig into my bad rig, my bad rig won't boot off of the hard drive, at first it was giving me bsod 0x0000007b, but now it won't even BSOD, it just restarts, tries to boot, does the animated logo for about two seconds, and then switches to Windows is now loading files, and then goes to restarting but then pulls up the startup repair / boot normal screen, now of course both of these do the same thing and just keep me in an endless restart loop

View 2 Replies View Related

On Boot Up: The Computer Shuts Down Then Restarts?

Jun 26, 2011

Whenever I start up my computer, it shuts down and then restarts.

View 4 Replies View Related

Computer Won't Boot - Failed To Do Startup Repair And Restarts

Feb 19, 2012

Basically the issue is that my computer won't boot. I have had it for just over a year and have never had any issues with it. It's protected and isn't used for anything dodgy, my brother uses it for SWTOR and I use it mostly for uni work and a bit of gaming here and there. Anyway out of nowhere it failed to start. Its done this once before and last time I just told it start Windows normally and everything was fine. This time not so much.

It loads up Startup Repair even if I select start Windows normally as it fails to do so and restarts itself automatically. I left it to detect errors but when I checked it a few hours later it still said searching so I cancelled and left it. I tried again yesterday and have left it on for approximately 25 hours to no avail, it still says searching! I have a lot of stuff I haven't backed up so I want to save it. Also note that there are no pieces of hardware plugged into the machine at all, only the mouse, keyboard and monitor.

Basic Info :-
Acer
Windows 7 x64
8 GB Ram
500GB HDD
NVIDIA G Force 950

View 3 Replies View Related

Gateway One ZX4300-01e Will Not Boot. Error Message / Reboot And Select Proper Boot Device

Jan 14, 2013

I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.

View 8 Replies View Related

Random Restarts / Freezing On Computer - BSOD With Error Messages

Aug 5, 2012

I've been having a strange issue with my computer for a while now. A strange combination of random restarts, freezing but most commonly BSOD all with different error messages. I've tried a lot even removing some RAM and changing my keyboard. I've also had it checked 4 times with still no results.

View 9 Replies View Related

Computer Restarts - Event Viewer Shows Kernel Error And Improper Shutdown

Jun 1, 2011

It is win 7 with updates. I built it a little over a year ago. It restarts all by itself. The event viewer shows a kernel error and improper shutdown. It may restart once or maybe twice a day or not at all but It happens too often and started a while back. I have checked temp using Sisoft sandra but its not overheated. The only thing unusual to me was the power supply fan seems to kick in twice. Its done that since it was new. It still does it at times but not always. The Power supply is a Fatality 550 w. The amd processor is low watts and so is the video card. I don't like the idea of replacing stuff just to see if it works. I don't know if ram or memory error could cause something like this?

View 10 Replies View Related

Won't Boot - Error Message

Jun 3, 2009

I can't boot to Windows 7. It says that Windows could not verify something about this object. Windowssystem32winboot.exe

Anyone got anyway to fix it so I can boot to windows 7?

PS: I used Vista Boot Pro, and for the boot loader option, I clicked Install Longhorn Bootloader. Could this be the problem?

View 4 Replies View Related

To Fix Error Message 0xc0000024 During Windows Boot

Dec 1, 2012

Starting Windows 7 Home 64 bit by hitting the F12 key I get the Windows Boot Manager screen. And it shows the following error message:The Windows Boot Configuration Data (BCD) store file contains some invalid informationI would like to copy a clean slate of the OS to another HDD so i may as well fix the existing one first.

View 2 Replies View Related

Computer Displays Error Message

Dec 17, 2012

My friend has a computer thats displaying an error message when he presses the power button to turn on his laptop. He has had it sense 2009 and it has worked perfectly fine up till today. After pressing the power button he immediately sees the screen shown in the link below. After he saw that screen he turned his computer off and attempted to turn it back on, the screen did not come on but all the lights displayed on the machine came on as normal and the fan was fully functioning. I dont know the specs of his laptop but he has an dell inspiron 1525. I have included a link that shows the specs for this pc model as well as an image taken of the error message.

View 7 Replies View Related

Computer Locking UP, No Error Message

Oct 6, 2011

The past few days my computer has been locking up, always when playing a video game, and I am forced to press the restart button. When I log back in, I receive no error message from the action center or anything. When I check the windows event viewer I see the messages that says "The previous system shutdown at 11:24:39 AM on ‎10/‎6/‎2011 was unexpected." and "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." but none that actually tell me why it crashed or stopped responding.

System:
OS: Windows 7 Home Premium
Motherboard: XFX nForce 750i
GPU: EVGA GTX 460 SSC
CPU: Intel Core 2 Quad 9550
RAM: 8g DDR2
PSU: 750 Watts
If anymore information is needed, please let me know.

View 3 Replies View Related

BSOD Error Message When Installing XP For Dual Boot

Nov 20, 2009

i was wondering if i could get any tips or advice, i keep getting bsod error message when trying to install xp, it looks like i have to install the sata drivers, i think i have to slipstream the driver with xp as from my post here, but i cant find the sata driver for my toshiba hard drive anywhere. My sony vgn-aw120j does not have drivers for xp on the sony website and toshiba does not have drivers on theirs. my hard drive is a mk-3252gsx from toshiba,

View 9 Replies View Related

Getting RunDLL Error Message When Computer Started

Sep 20, 2012

Today when I started my computer I got this error message titled RunDLL. It said that there was a problem initializing C:Windowssystem32HIMYM.DLL

System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 6142 Mb
Graphics Card: ATI Radeon HD 5800 Series, 1024 Mb
Hard Drives: C: Total - 76216 MB, Free - 6186 MB; D: Total - 953866 MB, Free - 727274 MB;
Motherboard: Gigabyte Technology Co., Ltd., X58A-UD7
Antivirus: avast! Antivirus, Updated and Enabled

View 1 Replies View Related

Computer Randomly Freezing, No Error Message

Aug 3, 2012

My computer has been running fine for about a year, I have reinstalled windows 3 or 4 times and I haven't had any major problems. During this last re-installation I formatted my hard drive to get all my space back, I'm not sure why but since I formatted my hard drive windows randomly freezes and It isn't during any specific program so I don't know what could be causing it.

system specs: OS NameMicrosoft Windows 7 Home Premium
Version6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS ManufacturerMicrosoft Corporation
System NameDOE-PC

[code]....

View 9 Replies View Related

What Does Message In Event File Mean Critical Error Boot Performance

Dec 1, 2012

After i press the on button of my HP pavillion, a pause of a few seconds occurs before it will start up. I get a message critiaclo error for boot performance in the event file.

View 1 Replies View Related

Boot Up Get An Error Message That Says, 'failed To Load Branding Configuration'?

Dec 16, 2012

Every time I boot up I get an error message that says, 'failed to load branding configuration'...what can I do

View 2 Replies View Related

BSOD Error Message - The Computer Has Rebooted From A Bug-check

Jun 1, 2012

Computer has rebooted a couple of times in the last month. Added details from event viewer and also updated dump files. Critical Error - Event ID 41 Source Kernel-PowerThe system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

BugcheckCode 244
BugcheckParameter1 0x3
BugcheckParameter2 0xfffffa8005d0e710
BugcheckParameter3 0xfffffa8005d0e9f0
BugcheckParameter4 0xfffff800035e1510
SleepInProgress false

[code]....

View 4 Replies View Related

Error Message : Boot Configuration Data Editor Has Stopped Working?

Dec 17, 2010

ok i had some recent windows updates succesfuly and rebooted, since that at start up im getting "Error msg : Boot configuration data editor has stopped working"any way to sort this ? what cause it ?Have tryed system restore several diffirent restore dates but still the same.

View 4 Replies View Related

Corrup File On C Drive / Then Error Message Saying Need To Restore My Computer

Dec 2, 2011

My son turned on his computer and it stated that he has "corrupt files on the "c" drive and needs to check for consistency". When it checks, an error occurs it says bc of a "recently installed program" and "needs to restore" his computer. It then goes to a black screen with only the mouse visible. He re-started in safe mode and tried to restore and it goes to the original message that he has corrupt file son the "c " drive.

View 1 Replies View Related

Error Message "No Drives Found" On Boot Up After New Build & Install?

Jan 2, 2012

Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23Detecting drives; Done; No drives found"next up is another black screen that reads:[CODE]

View 9 Replies View Related

On Startup Error Message "Reboot And Select Proper Boot Device"

Aug 24, 2012

My computer started to freeze up a lot and now I receive the following error message on startup: "Reboot and Select proper Boot device. Insert Boot Media in selected Boot device and press any key."It is a Windows XP OS.

View 4 Replies View Related

Each Computer Upon Reboot Displays An Error Message Saying The "updates Failed"

Nov 27, 2012

I have 4 Win 7 computer that will not up-date, Windows shows 21 updates available (all 4 computers show same), upon reboot system says "Updates Failed". Each computer upon reboot dsiplays an error message saying the "updates failed". rinse - repeat.This started with one computer about a month ago, I now have 4 that are doing it. I have scanned with Combofix, Superantispyware, Rkill, Symamtec's Endpoint, eSet on-line, Panda on-line, Malwarebytes, JRT, ADWcleaner, CCleaner, FSS, awsMBR, and tried the MS FIXIT.

I also tried this procedure:

1) Disabled Windows update Service

2) Deleted all files in c:\windows\softwaredistribution\datastore and deleted files in c:\windows\softwaredistribution\download

4) 3) Downloaded and installed the most up to date Windows Update Agent.

5) Restarted Windows Update Agent, made sure Workstation and Background Intelligent Transfer Services were running.

6) Ran the MS Mr. Fixit program to repair update issues.

7) Ran the Windows update. 21 updates to install (as always).

8) Rebooted

9) Guess what, same issue!

I tried this on ALL 4 COMPUTERS I have with this SAME issue, 2 of which are on the same domain, the other two are laptops. ALL 4 FAILED. All four (4) again show the need to receive 21 updates. All 4 were again ran through the update process, all four (4) again failed post re-boot to take the updates (message stated �up-dates failed� post re-boot)

View 8 Replies View Related

Computer Keeps Configuration Boot Error?

Feb 15, 2012

I have been having trouble with my computer being slow. After doing a repair install it is better, but it did not correct the "freezing up" part of it. Sometimes I can correct it by just clicking all over the screen and other times to ctrl, alt, del and click on different user, but it is a pain. Any one know why it would be freezing up?

View 9 Replies View Related

Install Restarts After First Boot

Mar 23, 2009

I am trying to install Windows 7 Build 7000 on my computer. But it does not seem to want to continue install after the first restart.

Here is what I did:

I put in the dvd, and boot my computer from the DVD. I set the DVD to be the only boot device in the BIOS. The installer starts. I go through all the steps needed for install. It comes to the first restart, and the computer restarts. After a lot of waiting, the computer brings up the first step to the install. Where it shows the "Install Now" Button. (The install basically starts from step One again).

Not sure what I did wrong through all this. My computer Specs are AMD 6400 2.20Ghz, 2 Gigs of Ram, Clean 40 Gig IDE Hard drive, on Different IDE channel then the DVD Drive (Not sure if that is important). Linksys Wireless Add in Card, BFG Nvidia GeForce 9600 GT.

So if someone could help me get Windows 7 up and running, that would be great!

I forgot to say that I tried to install Windows 7 off a virtual drive from within XP, but that didnt seem to work after the first restart also. It did put the windows boot loader on my computer, but didnt finish the Windows 7 Install. I have a feeling that it tried to over-right my Windows XP install, because the boot loader only comes up when my XP drive is plugged in. When I tried installing 7 with the CD, I had my XP drive unplugged. So if 7 tried to install on my XP drive, how can I get the files off it, that I dont want on it anymore, and install Windows 7 on my other drive, in a XP and 7 Duel-boot.

View 9 Replies View Related

Computer Restarts On Its Own Every Now And Then

Apr 30, 2012

Every now and then my computer shuts down then restarts on its own. I notice that any usernames and passwords that I have set to remember are reset. I get this error in my event viewer I don't know if its related :

"Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected".

OS: Windows 7 Ultimate.

View 2 Replies View Related

HdD Error Msg, And Windows Explorer Restarts

Dec 12, 2009

Few weeks old HP PC, Windows7 Home Premium, 64 Bit

Still fighting my problem with Windows Explorer shutting down periodically,

every 1/2 to 1 hour, fixing itself, and restarting. Really annoying to say the least, as the re-starts wipe out a few of the icons in the notification area of the Taskbar at bottom. Takes about a minute or so for the"re-fixing" to be accomplished.

Anyway, some of the error msgs in the Event Log had ATI mentioned.

Thought this might be a problem with my ATI graphics card.

There are two Users on PC, and the other user says he never, ever, gets any of these error messages, so it's hard to see that it's a graphic card problem, as the card, I would think, is active irrespective of the user. True ?

This morning the error message were different.

It said: "the Device detected a Controller error onDeviceHarddisk5DR5"

I will past the error descr. below.

Is this my main PC HD ? I only have one.

But I do use External HD's for backups.

Think the HD is about to quit ?

Have so many error msgs, that I was wondering if there is any way of opening my Event Log (viewer) to all on-line so you experts can have a peek at it? Other than posting one or two descriptions here, posting them all doesn't seem practical.

Any suggestions ?

View 2 Replies View Related

Computer Restarts Without Warning Every So Often

Aug 4, 2012

I've just moved flat and after I did my computer keeps rebooting itself every so often. There doesn't seem to be any reason to it. I've check that all my fans are still working and that all the cables and cards and what not are corrected install and that something hasn't been knocked but everything seems fine to me. I had a wee gander round the internet and it pointed me to check my system log and the two error codes I'm getting every time this happens is: Event I.D 41 + Event I.D 6008. The I have just recently got a new Graphics card, 4gb extra of ram and a wireless adapter. These were all installed on a clean version of windows 7.

View 12 Replies View Related

Computer Restarts Itself Rapidly

Nov 21, 2012

today i was watching some video on Internet. suddenly, the computer restarts itself. however, it turns on and turn off nonstop. the window does not even start yet, just about 2 3 seconds then it turns off.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved