HdD Error Msg, And Windows Explorer Restarts
Dec 12, 2009
Few weeks old HP PC, Windows7 Home Premium, 64 Bit
Still fighting my problem with Windows Explorer shutting down periodically,
every 1/2 to 1 hour, fixing itself, and restarting. Really annoying to say the least, as the re-starts wipe out a few of the icons in the notification area of the Taskbar at bottom. Takes about a minute or so for the"re-fixing" to be accomplished.
Anyway, some of the error msgs in the Event Log had ATI mentioned.
Thought this might be a problem with my ATI graphics card.
There are two Users on PC, and the other user says he never, ever, gets any of these error messages, so it's hard to see that it's a graphic card problem, as the card, I would think, is active irrespective of the user. True ?
This morning the error message were different.
It said: "the Device detected a Controller error onDeviceHarddisk5DR5"
I will past the error descr. below.
Is this my main PC HD ? I only have one.
But I do use External HD's for backups.
Think the HD is about to quit ?
Have so many error msgs, that I was wondering if there is any way of opening my Event Log (viewer) to all on-line so you experts can have a peek at it? Other than posting one or two descriptions here, posting them all doesn't seem practical.
Any suggestions ?
View 2 Replies
ADVERTISEMENT
Aug 2, 2011
Windows Explorer shuts down and restarts over and over again, except when in SAFE MODE.
View 2 Replies
View Related
Aug 2, 2011
Windows Explorer shuts down and restarts over and over again, except when in SAFE MODE.
OS Version: Microsoft Windows 7 Home Premium , 32 bit
Processor: Intel� Core™2 Duo CPU E8200 @ 2.66GHz, x64 Family 6 Model 23 Stepping 6
Processor Count: 2
[Code].....
View 6 Replies
View Related
Aug 20, 2012
I m having problem in my hp g62 361-tx notebook pc. Windows explorer stops and restarts whenever i try to open any video file like movies or video songs, also when i try to look the error in event viewer mmc stops not responding...
Diagnose report is given below:
Advanced SystemCare Diagnose Report v1.0
Date: 2012-08-20 20:42:55
----------------------------------
01 - Operating System
----------------------------------
[Code]....
View 4 Replies
View Related
Jan 11, 2013
I'm sending this from safe mode! I have been getting assisted with this since before the Holidays. I was sent to the Windows 7 forum to get some insight on why my CPU usage was clocking 100% no matter what I did. I ran several scans and combofixes and nothing seemed to work. I ran Malewarebytes and removed the items and explorer.exe will not run.
View 14 Replies
View Related
Nov 30, 2012
Whenever I go to the "Programs and Features" module in Win 7 I get the trusty old, "Explorer has stopped working and is restarting" my taskbar goes for a split second and P&F closes. I have gone to Event viewer to look for a reason and 9 out of 10 crashes acording to the faulting module is "msi.dll" Isn't msi the Microsoft installer? Anyway, how can I go about fixing this or troubleshooting it? It is to say the least annoying. My Computer is an Acer laptop Win 7 HP x64/8gb RAM /Core i5 430Mprocessor.
View 2 Replies
View Related
Sep 14, 2012
I recently reinstalled windows and now when I leave my computer for about 15mins it will restart itself and then on restart I get the following message:Realtek PCIe GBE Family Controller Series V2.39 (01/24/11) PXE-E61: Media test failure, check cable.PXE-E53: No boot filename received.I tried reinstalling windows again. Updating drivers, specifically the realtek ones.Also when I used my HDMI cable to connect to my TV as a second monitor it works for about 45mins then bluescreens.These all worked properly prior to reinstall.
View 1 Replies
View Related
Nov 3, 2012
I was in the middle of the installation of windows and in the formatting the computer restarts himself' and since then i get a message: press any key to boot...error loading operating system. I can't do anything else it's stucks at this point, what can i do to go back to the installation mode? i've tried everything
View 1 Replies
View Related
Dec 28, 2011
I am using windows 7 ultimate edition here my system restarts eery 2 seconds with a blue screen error, i hae tried cleaning the ram but it is not coming up at all, what may be the solution .
View 2 Replies
View Related
Aug 5, 2012
I've been having a strange issue with my computer for a while now. A strange combination of random restarts, freezing but most commonly BSOD all with different error messages. I've tried a lot even removing some RAM and changing my keyboard. I've also had it checked 4 times with still no results.
View 9 Replies
View Related
Jun 1, 2011
It is win 7 with updates. I built it a little over a year ago. It restarts all by itself. The event viewer shows a kernel error and improper shutdown. It may restart once or maybe twice a day or not at all but It happens too often and started a while back. I have checked temp using Sisoft sandra but its not overheated. The only thing unusual to me was the power supply fan seems to kick in twice. Its done that since it was new. It still does it at times but not always. The Power supply is a Fatality 550 w. The amd processor is low watts and so is the video card. I don't like the idea of replacing stuff just to see if it works. I don't know if ram or memory error could cause something like this?
View 10 Replies
View Related
Dec 17, 2012
I keep getting the error message that Windows Explorer has stopped working (I'm using x64 7 Pro) and then restarting. I have tried the following but, to no avail:Updating all drivers.Running Scannow under admin which could find no unerabilities.Running a virus check (Kasperky) which found nothing.Ran Malware Bytes which found nothing.I booted-up in Safe Mode which didn't bring-up the message.Ran System Restore which didn't fix the issue.
View 6 Replies
View Related
Aug 20, 2011
I'm repeatedly having this error where all the folders I have open is closing and an error message appears: "Windows explorer needs to close." After 1-2 seconds other programs that were running reappears but the folders have been closed. Is this normal? I ran full system scan with MSE, MBAM and Superantispyware. No virus or malware was found.
View 14 Replies
View Related
Apr 23, 2011
I am trying to open a ftp address using windows explorer. This is for my school work. I have Windows 7. I entered the ftp address and received an error 550 system cannot find file. I tried changing files and folders settings to show hidden folders. I did everything I know how to do. I am hoping the instructor entered my info correctly to allow me access.
View 4 Replies
View Related
Jul 22, 2011
I have a pc running Windows 7 64bit and for a week or two I have been having problems openeing Windows Explorer to view files etc. The first time I tried to open it, it would shutdown saying "Windows Explorer ash stopped working", but then when I tried again it worked. This was annoying but at least I could access my files to copy photos etc.
Today when I try to open it, I get an error saying "Microsoft Visual C++ Runtime Library. This application has requested the Runtime to terminate it in an unusual way. Please contact the applications support team for more information"
It comes up with this and then shuts explorer down, and everytime I do this I get the same. I have tried to access it through all the user accounts and get the same thing each time.
I have done a virus/malware check (I used Malwarebytes, AVG, and AdAware) and everything seems ok there, and I did a sfc/scannow (?) and that said everything was ok.
View 2 Replies
View Related
Jan 15, 2012
My computer has somehow change when running Windows Explorer. I used to be able to open Folders by Double-clicking on them. Now I get and error window that reads; "This file does not have a program associated with it for performing this action."
In order to open a folder, I have to Right-click on it and select the "Open" option instead of the default "Explore" option.
how to change the default back to the "Open" option?
View 3 Replies
View Related
Jan 13, 2013
I restored to a Windows Restore Point. Date was several months prior.Windows backed up what it needed for the restore on my external HD.Restored then after the computer reboot I have an error that will not allow me to do anything when windows is running."Windows Explorer has stopped working. Checking for the problem.""Restarting Windows Explorer"The icons disappear for a moment, return, then the error windows cycle through.
View 2 Replies
View Related
Jun 8, 2011
I constantly get a loop of "Windows Explorer has stopped working" errors. I've been trying to resolve this for hours now, I've looked at other threads similar to my problem but nothing seems to work. I'm currently on Safe Mode as this is the only way I can do anything without getting the error.
Here is AppCrash report:
Version=1
EventType=APPCRASH
EventTime=129004320084720403
ReportType=2 ...........
I have no restore points in system restore, already tried.
View 5 Replies
View Related
Mar 13, 2011
When I search using Windows Explorer, after approx. 30 seconds, I get the following error: "This application has requested the Runtime to terminate it in an unusual way."Would anyone know why I am getting this error and where would be a good place to start to correct it?I did a clean boot even excluding windows programs and the problem was still there. I have installed all the latest Windows 7 updates. I also tried sfc /scannow and I turned off MS security software and firewall all to no avail.Is there anything else I can try? Would there be some type of log file somewhere that would tell me what is causing the problem?
View 2 Replies
View Related
Nov 18, 2012
Error: There was a problem sending the command to the program.
Windows 7 x64, Office 2007,
McAfee anti-virus
corporate laptop
I have tried all options found on the web, and noe have worked!
check/uncheck DDE request
check/uncheck Run as adminstrator
In the event log Event log:The following boot-start or system-start driver(s) failed to load: PBADRV Process **mcshield.exe pid (2736) contains signed but untrusted code, but was allowed to perform a privileged operation with a McAfee driver.Process **VsTskMgr.exe pid (2472) contains signed but untrusted code, but was allowed to perform a privileged operation with a McAfee driver.are there any registry settings to change??are there any other top secret options to tweak?
View 2 Replies
View Related
Aug 7, 2012
My mom has an HP Mini 210-1044NR laptop. It no longer boots up right. I've tried to get the desktop screen to load in normal mode and safe mode, yet I keep getting the same error message.It says Windows Explorer has stopped working. Windows can check online for a solution to the problem the next time you go online.If I click close the program, it gives her a black screen and nothing happens. I cannot get to the start menu, even. Ctrl + Alt + Del brings up task manager, but it doesn't really give me much to work with.I did have the desktop loaded at one point, but then it all froze up and shut down.The problem details are:Problem Event Name: InPageErrorError Status Code: c0000010Faulting Media Type: 00000003OS Version:6.1.7600.2.0.0.768.11Locale ID: 1033Is there any way to fix this? Maybe bring the desktop back up? Or even get to the start menu to run something and fix it? I am going crazy trying to figure out what to do
View 6 Replies
View Related
Feb 8, 2013
I have a Dell Inspiron 14 that I bought last April. The hard drive crashed before Christmas and I had to send it to Dell of replacement. Obviously all other software applications on the computer were gone when we got the computer back from Dell. I have since reinstalled all software using my last license to do so. Now I am having major issues with internet explorer giving me an "Object Error" on some websites. All indications I have to reinstall windows 7. How do I do this and not loose all of my other applications that are on this computer?
View 9 Replies
View Related
Nov 11, 2010
or Fixed Error[CODE]
View 6 Replies
View Related
Jul 18, 2012
I got this message each time i click on personalize(right click)i searched on Google for solution but didn't find it yet
View 9 Replies
View Related
Mar 29, 2009
This is exactly the same error I got with 7048.
Clean install 7068 from Daemon Tools.
From Win + E:
From Explorer on Taskbar:
From the .exe:
Works fine from the Start Orb :
The only software installed is Avast, Vista Firewall Control,
Faststone Capture 53, Poweriso , FF 3.08 and Windows Live Mail.
Any ideas anyone?
View 9 Replies
View Related
Apr 26, 2009
Possible error here in Windows Explorer (build 7100 X-64)
Expanding Computer in the window on the left doesn't show the 2 installed CD / DVD devices but only the "Virtual Device" created by UltraISO.
Double clicking on the computer shows all the devices as shown in image 2.
UltraISO or Windows prob? Not a real "Show stopper" but I would like the system to be correct.
View 1 Replies
View Related
Nov 4, 2009
This is my first time on the forums, so I hope I don't screw this up. I have searched the forums and not found an answer to this problem, so I hope I'm not re-asking an old question...
I am running Windows Seven Professional 64-bit and Windows Update isn't showing any more possible updates.
My computer is a Dell Precision M90 laptop with a Intel Core2 Duo 2.0GHz processor.
Problem:
When I use Windows Explorer to open files that are associated with the program SolidWorks I receive the message: "There was a problem sending the command to the program."
I am running SolidWorks 2010 Professional SP0 which is a 3D modeling program for mechanical engineering. The program ran under XP without this issue.
I only receive this message if there is not an instance of SolidWorks running. Even after I receive this message, SolidWorks still loads and opens the file I selected through Windows Explorer.
This problem occurs no matter where the file is located (network or local).
This problem doesn't keep me from getting my work accomplished, but it is a bit of nuisance. Any help that anyone could offer would be much appreciated. I'm including a screen capture of the message.
View 3 Replies
View Related
Dec 27, 2011
my computer won't let me go on Internet. it will say there is something internet explorer is not working and a whole bunch of internet tabs would pop up saying error. do i have a virus?
View 3 Replies
View Related
May 13, 2011
When starting Internet Explorer, I keep getting and error message telling me that Windows Installer cannot be accessed. Now I cannot open Outlook, Word, iTunes etc. When I do try to open these programs, I get a message saying "Please wait while Windows configures Microsoft Office Small Business 2007", but it doesnt seem to do anything. I've run a diagnostic (F12) and was alerted of the following error :Error Code 0142, Msg Error Code 2000-0142, Status 79. The system is extremely slow and I can only stay logged onto an IE page for a few minutes before it has to shut down. My system just restarted (not sure why) and after the start up I got this error message "An error occurred in the program. Try to open it again. If this problem continues, you'll need to reinstall Microsoft Security Client. Error Code: 0x80040154". I am using Windows 7 Home Premium on a Dell Studio.
View 4 Replies
View Related
Dec 19, 2011
I turn the computer on, Windows (7 Home Premium, on a Dell Inspiron) starts, I go to my logon screen, type my password, hear the music and see the "Welcome" screen for a long time (3 minutes or so). Then I get a small error window with the message The application was unable to start correctly (0xc0000006). Please Click OK to continue.I click OK, and I see a frozen screen (black, not blue).That's it. Nothing else happen. Nothing works, except Ctrl+Alt+Del, Task Manager, where however, I cannot do anything.I can start window with the command prompt, or in safe mode, but I cannot go to explorer works (I have run explorer from the cmd prompt, with the same result as described above
View 1 Replies
View Related
May 8, 2009
I have just installed Win 7 RC onto my Fujitsu Lifebook and am receiving the above error repeatedly when trying to use Internet Explorer (also get similar error for Windows Explorer). When the error appears it lists the "process name" (iexplore.exe or explorer.exe), "Module name" (eg mshtml.dll - this varies) and "assert offset" (eg 004DEB6E - also varies) along with 3 buttons "Ignore Once", "Ignore Always" and "Do not ignore".
If I select "do not ignore" the windows error reporting process kicks in but does not find a solution and will ocassionally restart IE or kick me out completely. Selecting "Ignore Once" will often lead to a number of similar popups with either different module or assert offsets.
I have gone through device manager to ensure all my drivers are properly updated and have also tried to reinstall to no avail.
Not sure if it is connected but Windows Update does not appear to find any updates either even if I try and install Office 2007 and look for updates to that (I know it should find SP2 at least).
View 9 Replies
View Related
