I just got done building a computer, and I've got my OS. But, I can't load it, because I don't have the disk? It's an ISO image, and I'm unsure of what I'm supposed to do with it! I am clueless when it comes to things like this! If anyone could give me a laymans terms guide.
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
When open VCC and go to Displays/DigitalFlatPanels/LCD Overdrive, everything is grayed out. Everything else works, its just this, you can see it, but the text and borders are gray, at one point it worked for a brief period and said "cannot load test image" or something along those lines. is there any 3rd party driver I need to do this?
I recently purchased a new hard drive, and to this point have been utilizing Macrium only for backup images.
What I'm trying to do is copy a working image of my old hard drive including the OS Xp, to the new hard drive, but the pc won't boot with the copy installed on the new hard drive!
I have a laptop with Intel core i5 processor(x64). I use Windows 7 Home Premium. Lately, I am having a difficulty in loading image or any file in the Windows Live Movie Maker. I wanted to create a video file by compiling all of my images and some music but each time I open the program and try to load the files the program doesn't respond at all and ultimately I have to close the program.
My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
My c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.
For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?
Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?
On hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
I recently brought a new ssd disk because the old one was running out of space. Since I have created a system image I was of just restoring this to the new ssd disk but I have also brought some new ram as well and will install this too. Will this cause problems with using system image.
I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
just got a WD1500hlfs raptor i put windows disk in and it wont see the drive ,wants me to load driver which there is none. my other drive works fine but i want to change to the WD and it just not loading windows?
I recently installed an SSD in my laptop and moved the HDD to the secondary drive (I have room for two). I did a few of the prescribed steps for optimal SSD usage (moved user profiles to HDD, moved temp directory and page file, etc). Initially I was able to image only my C drive (about 30GB required). This was when I could still dual boot to my original partition on the HDD.
I've since removed the old Windows 7 install from the HDD and made it a single partition. However, now when I try to make a drive image I'm unable to deselect my HDD when creating an image. I'm given no option except to create an image for both drives with a resulting size of 209GB. I'm already backing up my user data already and don't want to include it in the image.
When I view the disk manager my HDD (drive E) is Disk 0 and my SSD (drive C) is Disk 1. I've run bcdboot c:windows /s c: to ensure I have the boot files on my SSD. I'm able to boot my machine on the SSD if I disconnect my HDD but it doesn' like that my profile isn't available. I've also tried to change the disk order in my laptop BIOS but I don't have the option of changing the order of the individual disks.
What I want to do is be able to do is image only my SSD and not the entire system. I also want to do it on a regular basis and avoid having to open up my laptop and disconnect the HDD.
Is this related to the order of my disks in the disk manager or is that just a red herring? How do I make it so I can only select the SSD when creating a disk image?
I had a hard drive fail, and I want to recover my recent backup/image from that failed drive, an image which was created with the Win 7 backup tool found in Control Panel. It's on an external hard drive. I of course want to recover it to a drive known to be good, such as the one that's in my computer now.If I have XP on said drive, can I make a partition and restore the 7 image to that new partition? Or would I not be able/allowed to have two Windows OS-es on the same drive, even on different partitions? It's XP Home and 7 Home Premium x64.
My SSD boot drive died yesterday but I have a recent image. What I don't have is a boot drive right now. I'm probably going to check some prices on SSD's locally later today and pick one up since it turns out the brand I was using isn't very reliable (OCZ Agility 2 60 gig - lasted 3.5 months). Assuming I do pick up a new boot drive how should I proceed? Should I install Windows on my HDD then restore the image to the new SSD or should I install Windows to the SSD and just restore everything but Windows? Or should I be doing something totally different?
I need to create a system Image of my C drive. I m I right in thinking Windows Backup wont allow me to save that image onto a USB Flash drive?
What if I use something like paragon, does that allow the actual image to be put into a flash drive? I know they allow "bootable usb" but I guess that s the same as what the Windows 7 DVD/USB tool does right..i.e but the actual windows to boot into and then use an image in the HDD to restore?
I had made a full image of 3 drives using Win 7 backup tool. However, since then, I have removed 2 of the disks but I want to restore just one of the drives where the OS was installed (these are physical HDD= 3). Windows restore CD does not let me restore just one drive since the image is for all 3.Is there any way that I can force windows 7 to restore just one of the drives from the the full image with 3 drives? Unfortunately, the drives that I removed already have new data in another PC and pretty big (2T each). I don't to buy 2 drives just to install the OS image.
I have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
I do back-up using "Control PanelAll Control Panel ItemsBackup and Restore" and select image, but my flashdrive says "The drive is not a valid back-up location".
I used my flash drive to install Ubuntu on my laptop and now I want to remove it from the flash drive. It is 4gb but it says it only have 949mb of free space blank. How can I clear the rest
I have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.
Is there a way to set the desktop background for a USB drive to an image, and have it portable so all PCs you plug it up to show the image? I can change the background using the desktop.ini, but it only works on my machine.. I want it to work wherever I plug it up?
I have a similar problem My windows is on a 65gb ssd Boot drive which is my c Drive, after windows there isnt enough smae for anything else my D drive has 1.5TB of free space but not all programes will give the option to change the install to go from C to D drive and even if they do they don't allways work.
I have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
I Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
Alright, I did a backup image in Windows 7 Ultimate 64-bit from a 500GB drive. I then took that out and put in a new Barracuda 3TB sata3 drive. After it was done restoring the image I extended the volume and of course it only gave me 2TB of space. So after reading a bit I needed to use Seagates disc wizard to format it to accept and show 3TB (2.79 useable) space which I did by hooking it up as an extra drive in another computer. Now my question is when I do hook it up in the new computer and put the image on again the process wants to automatically format the drive and in doing so I am afraid I will end up with the same 2TB's of space after extending the volume again.