I used my flash drive to install Ubuntu on my laptop and now I want to remove it from the flash drive. It is 4gb but it says it only have 949mb of free space blank. How can I clear the rest
View 6 Replies
I need to create a system Image of my C drive. I m I right in thinking Windows Backup wont allow me to save that image onto a USB Flash drive?
What if I use something like paragon, does that allow the actual image to be put into a flash drive? I know they allow "bootable usb" but I guess that s the same as what the Windows 7 DVD/USB tool does right..i.e but the actual windows to boot into and then use an image in the HDD to restore?
I do back-up using "Control PanelAll Control Panel ItemsBackup and Restore" and select image, but my flashdrive says "The drive is not a valid back-up location".
What is the issue?
I know its a bit noobish question but I dunno how to do what program I should use ? It must support windows 7 x64.
View 6 Replies View Relatedis there any hidden feature which handles this issue ?
View 9 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I have been using build 7229, and it has been absolutly brilliant.
Now, apart from that, i have had general probs, one of which forced me to reinstall everything (Kaspersky 6.0 does not work properly with win 7, well i did'nt with me, had a BSOD when i rebooted, one of which explained a process that had been terminated, process that the CPU runs, anyway the HDD is formatted and i restarted again), this has now forced me to make a disk image incase something happens.
No what i wanna know is, can i use that disk image or a back-up and flash that onto an RTM version (when there released), so's i don't have to reinstall everything. i.e. the back-up or disk image does it all for me. Or is this not possible.
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB;
Motherboard: FOXCONN, 2AB1
Antivirus: Norton 360, Updated and Enabled
My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
View 5 Replies View RelatedBefore I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
My c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.
For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?
Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedOn hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
View 1 Replies View RelatedI recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
I recently brought a new ssd disk because the old one was running out of space. Since I have created a system image I was of just restoring this to the new ssd disk but I have also brought some new ram as well and will install this too. Will this cause problems with using system image.
View 9 Replies View RelatedI think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
I just got done building a computer, and I've got my OS. But, I can't load it, because I don't have the disk? It's an ISO image, and I'm unsure of what I'm supposed to do with it! I am clueless when it comes to things like this! If anyone could give me a laymans terms guide.
View 10 Replies View RelatedWhen I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
View 14 Replies View RelatedI have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
View 1 Replies View RelatedI recently installed an SSD in my laptop and moved the HDD to the secondary drive (I have room for two). I did a few of the prescribed steps for optimal SSD usage (moved user profiles to HDD, moved temp directory and page file, etc). Initially I was able to image only my C drive (about 30GB required). This was when I could still dual boot to my original partition on the HDD.
I've since removed the old Windows 7 install from the HDD and made it a single partition. However, now when I try to make a drive image I'm unable to deselect my HDD when creating an image. I'm given no option except to create an image for both drives with a resulting size of 209GB. I'm already backing up my user data already and don't want to include it in the image.
When I view the disk manager my HDD (drive E) is Disk 0 and my SSD (drive C) is Disk 1. I've run bcdboot c:windows /s c: to ensure I have the boot files on my SSD. I'm able to boot my machine on the SSD if I disconnect my HDD but it doesn' like that my profile isn't available. I've also tried to change the disk order in my laptop BIOS but I don't have the option of changing the order of the individual disks.
What I want to do is be able to do is image only my SSD and not the entire system. I also want to do it on a regular basis and avoid having to open up my laptop and disconnect the HDD.
Is this related to the order of my disks in the disk manager or is that just a red herring? How do I make it so I can only select the SSD when creating a disk image?
(Drive Image XML) compatible with windows 7 Home Premium. I am trying to back up my system according to the pre-directions for virus removal.
View 4 Replies View RelatedI had a hard drive fail, and I want to recover my recent backup/image from that failed drive, an image which was created with the Win 7 backup tool found in Control Panel. It's on an external hard drive. I of course want to recover it to a drive known to be good, such as the one that's in my computer now.If I have XP on said drive, can I make a partition and restore the 7 image to that new partition? Or would I not be able/allowed to have two Windows OS-es on the same drive, even on different partitions? It's XP Home and 7 Home Premium x64.
View 4 Replies View RelatedMy SSD boot drive died yesterday but I have a recent image. What I don't have is a boot drive right now. I'm probably going to check some prices on SSD's locally later today and pick one up since it turns out the brand I was using isn't very reliable (OCZ Agility 2 60 gig - lasted 3.5 months). Assuming I do pick up a new boot drive how should I proceed? Should I install Windows on my HDD then restore the image to the new SSD or should I install Windows to the SSD and just restore everything but Windows? Or should I be doing something totally different?
View 5 Replies View RelatedI had made a full image of 3 drives using Win 7 backup tool. However, since then, I have removed 2 of the disks but I want to restore just one of the drives where the OS was installed (these are physical HDD= 3). Windows restore CD does not let me restore just one drive since the image is for all 3.Is there any way that I can force windows 7 to restore just one of the drives from the the full image with 3 drives? Unfortunately, the drives that I removed already have new data in another PC and pretty big (2T each). I don't to buy 2 drives just to install the OS image.
View 5 Replies View RelatedSo I have a system image from Windows Backup and Restore. Is it the same thing as a Cloned drive? If not, what differences are there?
View 3 Replies View RelatedI have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies View RelatedI have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.
View 7 Replies View RelatedIs there a way to set the desktop background for a USB drive to an image, and have it portable so all PCs you plug it up to show the image? I can change the background using the desktop.ini, but it only works on my machine.. I want it to work wherever I plug it up?
View 1 Replies View RelatedI have a laptop sony vaio y series without cd/dvd drive. my questin is i want to make my window 7 image file.
View 2 Replies View RelatedDownloaded MP3 Rocket from Cnet but requires a flash player 11. Downloaded it but kept getting a mesage: "A newer version already installed" which is not true. Tried to install an older version but Adobe won't let me install it as it says there is a new version of it.By the way, I had Adobe Flash Player before and it worked!
View 3 Replies View Related
