How Can I Mount The Image Into A Usb Flash Drive ?
Apr 24, 2009I know its a bit noobish question but I dunno how to do what program I should use ? It must support windows 7 x64.
View 6 RepliesI know its a bit noobish question but I dunno how to do what program I should use ? It must support windows 7 x64.
View 6 RepliesI need to create a system Image of my C drive. I m I right in thinking Windows Backup wont allow me to save that image onto a USB Flash drive?
What if I use something like paragon, does that allow the actual image to be put into a flash drive? I know they allow "bootable usb" but I guess that s the same as what the Windows 7 DVD/USB tool does right..i.e but the actual windows to boot into and then use an image in the HDD to restore?
I do back-up using "Control PanelAll Control Panel ItemsBackup and Restore" and select image, but my flashdrive says "The drive is not a valid back-up location".
What is the issue?
I used my flash drive to install Ubuntu on my laptop and now I want to remove it from the flash drive. It is 4gb but it says it only have 949mb of free space blank. How can I clear the rest
View 6 Replies View Relatedplace Daemon Lite on a second hard drive I have created out, then mount the Recovery Disc to the program in the hard drive and run a "Reset to Factory Settings" recovery from that mount? I think it would work if i boot from bios to my clean HD and then use "cd "Gaemon" and run the ISO file from that dir.
View 1 Replies View RelatedI have a failed hard drive that I'd like to send back to get replaced but obviously want all my data wiped first. The problem is that the drive has failed so miserably that it won't even mount to any system in order to perform any sort of wiping. I've connected it to my system directly, via a USB to IDE adapter, and via an eSATA adapter in both Windows and Linux to no avail. Sometimes it will show up in the Device Manager under Hard Drives, but that's as far as it gets - it's never assigned a letter and doesn't show up in Disk Manager. It doesn't show up in Ubuntu when I perform an fdisk either so I can't perform a DD.
This is a bit of a catch 22 as the hard drive has failed to the point where it can't be read, but I'm not sure what measures are going to be employed to attempt to validate and read the data at the manufacturer when they test it for failure. If the drive all of a sudden starts working, there is too much personal data on there for me to just hope doesn't turn up.
I am using this command: Code: mount -u:root -p:[password] \216.17.1.125srvwwwhtdocs g: at the command line to mount an NFS-enabled network drive from my Windows 7 machine.
I need to know what I need to put in a batch file (which will be put in my Startup folder), so the drive is automatically mounted at login/startup.
I tried just putting the line above in a batch file, but that didn't work.
When I plug my Samsung SIII (ice cream sandwich) into my Windows 7 pro USB port, it mounts as a portable device but does not have a drive letter associated with it. This makes it difficult (impossible) for me to reference it for running scripts or with various file copy utilities. I do not want to have to "import" pictures, as that process offers no control over the file selection in my 64gb sim card. How can I mount DCIM directory as a regular windows drive with a drive letter, so that I can perform normal file folder operations on it?
BTW. To add insult to injury, I only want a half dozen pictures out of the many GB in the DCIM folder. However, since I cannot see thumbnails, I cannot pick out the few which I would be happy to drag and drop, if I knew which ones they were.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I have been using build 7229, and it has been absolutly brilliant.
Now, apart from that, i have had general probs, one of which forced me to reinstall everything (Kaspersky 6.0 does not work properly with win 7, well i did'nt with me, had a BSOD when i rebooted, one of which explained a process that had been terminated, process that the CPU runs, anyway the HDD is formatted and i restarted again), this has now forced me to make a disk image incase something happens.
No what i wanna know is, can i use that disk image or a back-up and flash that onto an RTM version (when there released), so's i don't have to reinstall everything. i.e. the back-up or disk image does it all for me. Or is this not possible.
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB;
Motherboard: FOXCONN, 2AB1
Antivirus: Norton 360, Updated and Enabled
My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
View 5 Replies View RelatedBefore I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
My c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.
For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?
Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?
After i install my OS of course im gonna be installing my favorite programs.. but if anything happens to my pc in the future instead of recovering the manufactures settings I wanna mount my whole OS so i can recover my pc and programs as well.
View 4 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedMy SDHC (4GB) card is read fine and mounted correctly when I boot Windows with the card in. However if I remove it (always safely!) then insert it back I hear the sound from Windows as if it recognizes a new device has been found but the card isn't mounted and there is no way to access the card again. I have to reboot.
View 4 Replies View RelatedI'm planning on placing my C:Users folder on a separate partition of my HDD. I know the general scheme of things would be to create the separate parition, we'll call it D:. and then robocopy everything from C:Users to D: and delete the contents of C:Users before mounting D:Users.
Does anyone have any clue what to do if I want D: to be a FAT32 partition? Will I run into trouble because of permissions from the NTFS partition that Users originally resided on?
I recently bought a new computer, it came with a 1TB hdd which was mounted. I had a new 1TB HDD already, and when i tried mounting it, it was to small, the HDD that the pc came with had some plastics on it's sides that held it properly.I mounted the HDD and put it on the Case floor, it's working but recently i've been getting I/O errors, it all solved when i unplugged and plugged it again, but my question is, how do i mount it properly without those plastics as i don't know what they are or how they are called?
View 1 Replies View RelatedHow to Mount a Hard Drive or Partition as a Folder in Windows 7 ?
View 0 Replies View RelatedOn hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
View 1 Replies View RelatedI recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
I haven't reached my limit yet, but I'm down to a few unused drive letters, so I've been looking for a way to reorganize. I tried mounting my media drives in NTFS folders, which works OK, but is quite sub-optimal as you can't index them and thus cannot use them in the Libraries. You also can't run chkdsk on them at all.
Does anyone see any other options here? If I mount all of my media drives to letters, I run out of alphabet... if I mount them in folders I can't use index, libraries, or chkdsk. I'm not too excited about switching back and forth for disk maintenance even if I could just give up on Libraries...
i downloaded daemon tools pro for my window7 but i can't mount files
View 1 Replies View RelatedI recently brought a new ssd disk because the old one was running out of space. Since I have created a system image I was of just restoring this to the new ssd disk but I have also brought some new ram as well and will install this too. Will this cause problems with using system image.
View 9 Replies View RelatedI think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
I just got done building a computer, and I've got my OS. But, I can't load it, because I don't have the disk? It's an ISO image, and I'm unsure of what I'm supposed to do with it! I am clueless when it comes to things like this! If anyone could give me a laymans terms guide.
View 10 Replies View RelatedWhen I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
View 14 Replies View RelatedI have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
View 1 Replies View RelatedI have these problems with my dell xps m1330 and I also can't boot into safe mode, what do I do? Also when I try to reinstall windows from USB it loads a black screen with movable mouse.
View 9 Replies View Related