BSOD - Unable To New Install Windows 7 On New SATA
Apr 22, 2012
Using Tyan K8W Thunder s2885 in rack mount case. The board is over 10 years old. Dual AMD Opteron 250 processors, 64 bit. RAM 8 Gb. ATI Radion HD 3650, AGP. There is only the video card, driving a single LCD monitor, PSP mouse & USB keyboard, and the HDD attached to the board, no peripherals.I am installing Win 7 home Premium 64 bit. I have had Windows 7 running on this board for over a year, from an IDE 80 gig drive.I installed a new SATA 500 gb and have only that drive in the case.
I have to manually load 114R5_x64_15150_logo drivers for Sil Image SATA controller, from a USB drive. I have just spent a day learning about and using DISKPART to finally be able to start the install. The install starts OK, expands and loads files. About 2 minutes into 'expanding files' I get BSOD, STOP: 0x00000124,(0xFFFFFA800643F038,0X00000000B604A001,0X000000000000813)I have repeated the steps and reproduced the problem at about the same time into the install. I have no idea if there is a way to read/post a log. Since windows is not installed, there is not the usual dump available.
View 1 Replies
ADVERTISEMENT
Jan 21, 2012
I am building a htpc but cannot seem to get windows to install onto my SSD.The SSD is visible in BIOS and on the 'where do you want to install windows' screen.I am wondering if that is because the OS cannot install to my mobos sata 3 portsI havecrucial m4 SSD 4GBMSI H61MA-E35 with usb3/sata3The sata 3 ports are ASmedia according to the manual.i think i know where this is heading and will be fairly annoyed if so because i bought this board specifically for the sata 3 boot drive option.
View 5 Replies
View Related
Aug 10, 2011
i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies
View Related
Aug 10, 2010
I'm trying to add 3 additional HDs to my system for storage, using RAID 5 configuration. However, when I set the PCH SATA Control Mode option to RAID(XHD) (in order to enable the motherboard RAID controller) in my BIOS, I get BSOD for a milisecond during the windows 7 loading and then the PC is restarted automatically.
My system spec:
Intel CPU i7 2.66MHz, 8GB RAM DDR3 1333MHz
GigaByte's Motherboard - GA-P55A-UD3
1 x WD3000HLFS-60G6U2 ATA Device (1x300GB)
3 x ST3500418AS ATA Device (3x500GB)
1 x HL-DT-ST DVD-RAM GH40L ATA Device
Windows 7 Ultimate, 64bit
Drives connection configurations:
SATA2_0: ST3500418AS
SATA2_1: ST3500418AS
SATA2_2: ST3500418AS
SATA2_3: N.C.
SATA2_4: DVD-RAM
SATA2_5: WD3000HLFS (System HD)
GSATA3_6: N.C.
GSATA3_7: N.C.
View 5 Replies
View Related
Dec 20, 2009
I recently embarked on the journey of building my first custom PC. Everything was going well, until I hit a speed bump of installing Windows 7 64 bit. So like usual I boot from the CD drive, and stick Windows 7 in. When it gets to the point where I'm going to install, it is unable to find my SATA drive to install Windows 7 on.
It then asks me to "locate drivers." So it gives me an option to browse, and when it does so I put in the disk that came with my mobo, but it's unable to find any drivers. I tried downloading drivers from my motherboard's web site, sticking them on an external HD, and locating them from there, but that still didn't work.
I checked in my BIOS, and my SATA type is under Native IDE. I tried switching it to AHCI, and my HD was no longer detected in the BIOS, switched back to Native IDE and it found it again. Also, Onchip IDE Channel is set to Disabled, and Onchip SATA Control is set to Enabled, does this matter any?
I was wondering,though, is it possible that if I set the SATA type to AHCI, move the SATA cables into ports so that the drive is recognized by my BIOS, use the AHCI drivers I downloaded, Windows 7 will detect it?
View 5 Replies
View Related
Jan 12, 2012
I opened my external drive case and took the 3.5" hard drive out so that I could connect to the computer internally with a SATA cable because I don't have an external SATA cable and internal SATA interface. I started the Windows 7 Ultimate system. The computer screen remained on "Starting Windows" forever.If my memory serves me right, I remember I did manage to access it with another computer before. That computer has been out of service. At present I can access it while the drive is in the case connected with a USB cable. The Windows explorer shows all the partitions in the drive.
View 4 Replies
View Related
Jun 14, 2011
2 hours ago,i wanted to install windows7 on my sata disk ,cause i destroyed my old partition with ubuntu 10.10. So i started to install Windows 7 .However it couldnt be normal.Then i get an error: . A partition on the disk''0''could not be formatted .The error occurred while preparing the partition selected for installation .Fault code: 0x80070057
View 1 Replies
View Related
Mar 29, 2012
I just installed a new HD. [URL] - Western Digital Caviar Green WD20EARX 2TB 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
I hooked it all up and the BIOS seems to see it. And Windows "found new hardware" and "installed drivers".
View 5 Replies
View Related
Mar 30, 2012
I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
View 8 Replies
View Related
Jun 16, 2011
I'm trying to do a fresh install of windows 7 and it wont recognize my hard drives. I've done some research and determined i need the correct drivers, but i don't know which ones. I'm trying to install them on 3 WD3000HLFS in RAID 0. The HDD are plugged into SATA 6 ports( only 2 SATA 3 ports on the mobo).
View 4 Replies
View Related
Mar 4, 2012
I have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.
View 2 Replies
View Related
May 26, 2012
I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.
The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"
View 1 Replies
View Related
Feb 2, 2011
In the past I've migrated 7 from one hdd to another by doing a backup to a usb drive, then swapping the drives and restoring to the new one. What I need to do now is a twist on that. My MB is one of the new p67s that has the faulty intel sata ports, and will eventually be recalled. The 4 6Gps sata ports on the board are not affected by the chipset problem, so I plan on just using them instead (plus I just got a 6G seagate drive that I wanted to use anyway). What I envision happening is restoring to the new drive on an entirely different sata adapter and port #, and the system not booting. I assume I could get around this by booting to a command prompt and using bcedit, but am not 100% on that.
View 6 Replies
View Related
Jul 14, 2010
Well, I've done a lot of research (googling) on whether or not to install Windows 7 on my solid state drive in AHCI or IDE sata mode. I wanted to confirm it with you guys to make sure I got this straight before I go ahead and install Windows 7.
If I install windows 7 on my solid state drive in sata mode ahci then later I can go to IDE if I wanted to by just switching it in bios. But if I install windows 7 under IDE mode then ill have to do a registry value change to make windows 7 work in ahci mode.
Everyone seems to have a different opinion on whether or not ahci mode is faster or worth it over IDE mode for windows 7 on a SSD. I'm not all that interested in hot swapping so thats not a interesting feature for me. I'm looking for reliability as a top priority.
View 7 Replies
View Related
Sep 10, 2012
I have just bought two brand new WD 500 GB RE4 HDD's and connected them coorectly for RAID 1. I have changed the BIOS and Pressed Ctrl+F to create the RAID and this has been successful. When installing Windows you obviously get to the aprt where you need to load the floppy drivers to locate the drives...
I have downloaded ever driver from the Gigabyte support drive and loaded them onto a USB, not one driver can be seen when the USB is "Browsed" too...
How important is it that the drivers are on a floppy, as I do not have a floppy drive or access to a floppy and drives. Also what driver should be downloading as I tried the 3.2.1540.17 one and that was not seen, so I just downloaded them all in an attempt for success.
View 9 Replies
View Related
Aug 29, 2012
I assembled a new computer using:
Windows 7 64bit Pro SP1 OEM System Builder Pack
Gigabyte H77M-D3H
1TB SATA HDD WD Caviar Black
Intel Core i3 2125
DDR3 8GB 1600 Intel Viper
SATA LG Blue Ray DVDRW
Clean install of Windows reveals an error not detecting any drives, does not allow partitioning or formatting. BIOS identifies the drives.I've attempted installs of updated drivers from the motherboard's website (as well as the CD that came with the motherboard). WD claims not to have any drivers on their website. Still nothing.
View 6 Replies
View Related
Nov 3, 2012
i installed a sata controller because the sata controller on the motherboard went out. I can easily install ubuntu but when i try installing win 7 it asks for a cdrom driver, when i try booting from usb it asks for hdd driver.
View 1 Replies
View Related
Jun 4, 2010
This seems to be such a frequent issue that it could/should be a FAQ but I haven't found my answer yet.
I am (currently) running Windows 7 64 ULT on my home PC. I purchased an Intel X25M 80GB SATA drive and connected it in order to benefit from the speed. The issue is that setup hangs during the "expanding files" on this drive. Looking back I have *never* been able to install windows (XP Vista or 7) on a SATA drive on my mobo.
In order to avoid confusions I did the following.Removed the 2x400GB striped drives. Removed the old PATA-IDE drive, therefore only drives available were the Optiarc DVD and the new Intel SSD.
View 4 Replies
View Related
Mar 2, 2010
How to Install a SATA DVD CD Drive in a Desktop PC ?
View 0 Replies
View Related
Sep 29, 2009
I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
View 0 Replies
View Related
Nov 5, 2009
I've just bought parts and collected a new PC system. My Motherboard is AsRock M3A785GXH/128 ASRock > Products > M3A785GXH/128M
and regarding to the manufacturer it should be Windows 7 hardware ready.
But I can't install Windows 7 pro 64 bit on my new system. The Windows 7 installation application can't see my harddrives and want a driver to them. I assume that should be a driver for the SATA controller on the motherboard. I've tryed to use the drivers on the motherboard cd-rom and tryed to use the drivers froms asrock homepage, but Windows 7 wont accept them.
I have contacted AsRock about this issue, but I'm wating for an answer and hoped that you guys might has seen this problem before, and will answer quicker than AsRock Support
I should say that I cant install Windows Vista Business 64bit without any problems at all.
View 9 Replies
View Related
May 24, 2011
The mobo's kinda old, and not the greatest; the builtin SATA only works for Raid, so I put in a PCI sata card with the SIL3114 chipset. The computer now sees the 64GB SSD Patriot HD I'm trying to use for her C drive (The SSD is a leftover from a different project... I thought it'd lend some additional performance to help make up for the 1.2 ghz cpu). When I get into Windows setup, though, Windows 7 does not recognize the drive, and none of the drivers that came with the PCI card seem to work. I suppose I should have double checked before buying the SATA PCI card to find one that has native Windows 7 drivers, but I thought the stone age days of needing SATA drivers were over, guess I was wrong!
View 4 Replies
View Related
Nov 26, 2009
I am attempting to install a Windows 7 OEM x64 onto an older machine I have. MB is a Foxconn NF4UK8AA-8EKRS, CPU is AMD Athlon 64 x2, 4200+ 2.25 GHz, RAM 1GB. I installed a new OEM 500GB SATA hard drive unformatted.
Current OS is Windows XP Home SP2, I deleted SP3 since it was giving me some problems with auto login.
My DVD drive will not read the Windows 7 installation disk, similar to another post the drive just flashes, never spools up. It will read other CDs and DVDs.
I initialized the hard drive but have not partitioned or formatted the new SATA hard drive which is where I want to install the new OS. While the BIOS recognizes the drive, its not listed on Computer tree.
I have copied the Windows 7 OEM DVD contents onto a Folder that I created on a Toshiba External USB drive. Only had a 2GB USB Flash Drive so thought I would use the external drive and select the setup.exe in the Windows 7 files I copied into a folder without formatting a complete 250GB ext USB drive.
Question, can I partition and format the new SATA drive using the Windows XP Home Edition with an NTSF format and will this be recognized by Windows 7?
Question, can I install Windows 7 from the Toshiba Ext USB drive's folder onto the newly formatted SATA drive? Or does Windows 7 require a different formatting setup?
The BIOS and MB won't recognize a DVD drive it only allows a boot from CD. I removed the CD and DVD master/slave parallel cable and only installed the DVD as the master, but Windows 7 DVD just blinks and never spins the drive.
If I can get the new OS installed I'll remove my two older 40GB PATA hard drives and add more RAM. This machine is for my wife's use since it was in the garage gathering dust. Thought I would revive it and set up a wireless home group between my machine and her's. I added an all in one printer/copier/scanner in addition to the HP Photosmart D7460 I have so we can share files, printers and Internet connection.
I have been building my own machines since about 1990. Building a machine is fun (takes maybe 2hrs) but all the software kicks my butt. Also I went to the OEM System Builder License at Microsoft OEM Partner Center that is the most confusing arrangement I have ever seen. I'm just a home builder having fun, not a business, must I buy the full version to get this installed?
View 1 Replies
View Related
Aug 10, 2010
Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
View 9 Replies
View Related
Mar 1, 2010
How to Install and Setup a SATA Hard Drive ?
View 0 Replies
View Related
Oct 15, 2011
I had to do a fresh reinstall today and I wanted to know if I should download and install any of the drivers (other than Ethernet LAN to get me online) for my comp'?In particular, the SATA drivers for a 64-bit install
http://ca.gigabyte.com/products/pr [...] l=1#driver,I do have to install the audio and video, but otherwise, not sure about the SATA.
View 3 Replies
View Related
May 23, 2009
i am not sure it's windwos 7 problem or my configurations
i tried to install windows 7 RC on the below setup (all new), but failed
1. SATA harddisk, WD Cavier 1T
2. mobo, Gigebyte GA-GM-785-S2H
3. SATA optical drive. LG-GGC...
the last two components work fine if i replace the SATA HD to a IDE HD, meaning the existing system (xp) started normally. no windows 7 installation
but, when i try the 3 componenets togehter to install windows 7 (the SATA HD was not even formated). the scenarios were:
1. if i configured the cmos to see the SATA HD as AHIC mode, the system would freeze at "verifying DMI pool", not even bothering to start the windows 7 installation disk (even i defined only one start-up device, my optical sata).
2, if i configured the cmos to see the SATA HD as Native IDE mode, the system would go to the optical sata and found windows 7. THE PROBLEM came during "windows is loading files". after like half min, the error message popped out, saying an I/O error occured, either i had a external usb drive corrupted or a storage fault.
The problem came out when i had no usb devices attached at all. then i also tried to copy SATA mobo driver to a usb stick and connected to the system. but still the same problem.
i also tried clear cmos, load default profie,
My questions:
1, how to solve this....
2, should i set native IDE mode before installing windows 7(also other windows systems?)
3, what is at least the correct way to install this.
4, is this a windows 7 installation issue or what?
View 2 Replies
View Related
Jun 27, 2012
Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?
View 9 Replies
View Related
May 7, 2011
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies
View Related
Aug 23, 2012
Attached is all of the information. This is a new build, completed on saturday with a fresh install of Windows 7. I have ran memtest86 for 4 hours, completing 4 passes with no problems. I have reinstalled all motherboard drivers. I tried using driver verifier a few days ago and was unable to boot into windows without a BSOD. Was able to boot into safe mode to disable it. Have either been browsing on firefox, idle, or in a random application during each BSOD.
I have not yet had a BSOD while in safe mode (with or without networking). The BSOD tend to happen fairly often, with the longest time in between one occurring almost 20 hours. That only happened once, however, as all the other ones occurred within 5-10 hours of the computer being turned on. The next step I was going to take if I can't get a good answer would be to either reformat or do a "repair install" which I'd have to read up on before trying it.
View 9 Replies
View Related
Nov 18, 2012
in the middle of playing a online mmo the blue screen came up. Restarted and now windows fails to start. I have tryed to use start up recovery option and it try's to start but before start up repair screen comes up and my only option is to restart. The error code is
0x0000001e (0xffffffffc0000005 , 0xfffff8001b0eb505 , 0x0000000000000000 0xffffffffffffffff)
And another is
*** stop: 0x00000024 (0x0000000000001904fb, oxfffff880029c72e8, 0xfffff880029c6b40, 0x0000000000000000)
And yet again
*** stop: 0x0000007e (0xffffffffc0000005, 0xfffff8000c203617 , 0xfffff880009a8a38, 0xfffff880009a8290)
And so on, I have not seen a named driver at all so I have no idea where to go here the computer was running fine before and I built it only 3 weeks ago and have done no updates or software changes in the last week.
View 2 Replies
View Related
