BSOD Unable To Start Windows
Nov 18, 2012
in the middle of playing a online mmo the blue screen came up. Restarted and now windows fails to start. I have tryed to use start up recovery option and it try's to start but before start up repair screen comes up and my only option is to restart. The error code is
0x0000001e (0xffffffffc0000005 , 0xfffff8001b0eb505 , 0x0000000000000000 0xffffffffffffffff)
And another is
*** stop: 0x00000024 (0x0000000000001904fb, oxfffff880029c72e8, 0xfffff880029c6b40, 0x0000000000000000)
And yet again
*** stop: 0x0000007e (0xffffffffc0000005, 0xfffff8000c203617 , 0xfffff880009a8a38, 0xfffff880009a8290)
And so on, I have not seen a named driver at all so I have no idea where to go here the computer was running fine before and I built it only 3 weeks ago and have done no updates or software changes in the last week.
View 2 Replies
ADVERTISEMENT
Jul 1, 2012
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
View 14 Replies
View Related
Aug 28, 2012
Recently I built a new computer. This was the first time I'd ever done so and I had a lot of fun doing it. I got everything to work and have been happily using said computer for the last week. Until now.As of this morning, when I start up my computer I get an error that says Windows was unable to start. After spending a while trying to repair it told me it could not find the problem. I tried system recovery a few times, which solved nothing.After trouble shooting for a bit, I found this in the Diagnosis and Repair Details: "Rootcause found:Boot critical file D:Windowssystem32DRIVERSjaStor.sys is corrupt"
View 13 Replies
View Related
Mar 31, 2012
my system installed some windows update files and following this i am unable to boot my system.it runs in safe mode but i am unable to revert back the changes.tried system restore which doesnt work.start up repair was also unable to fix the problem.
View 2 Replies
View Related
Jan 24, 2013
I formatted my desktop today, and now - sadly - i have issues.What happened was: I formatted - No issues. Windows Booted and all was good.I proceeded to install all the updates labelled "Windows" and anything else system related (No drivers, no third party stuff) Only stuff from microsoft. I have tested all things (Startup Repair, Bios Check and so on). When selecting "Start up windows normally" It continues to the boot screen, stays on it for a few seconds. Then bluescreens and restarts faster than i can see the damn error code or anything.
View 8 Replies
View Related
Mar 20, 2011
I'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following:
"Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
View 5 Replies
View Related
Mar 20, 2011
I'm using Windows 7 Ultimate and yesterday I did my first image backup using Acronis True Image 2011 (I'd previously been using an earlier version with no problems.)
When the backup completed I told the computer to shut down and it went to a screen that said the following: "Operations in progress. Please wait. The machine will be turned off automatically after the operations are complete."
The screen had a blue background with the blue ring with the white bit going round and round to the left of the text and the Windows 7 Ultimate logo at the bottom.
I left the computer and came back over an hour later and the computer had gone into standby. When I pressed the start button the same screen was still displaying so I left it for a couple more hours and came back to it and the same thing happened. I turned the computer off at the back and switched it on again this morning. I got the "Starting Windows" screen and then it went straight back to the "Operations in progress..." message.
View 6 Replies
View Related
Aug 18, 2012
I can't start Windows unless I run Windows Memory Diagnostic Tool. My pc will just boot to the page where it says 'press DEL to enter setup, F12 for boot menu' (hereinafter referred to as boot start screen) and after that no 'Starting Windows' will appear, only black screen. I have to press the space bar simultaneously (while boot start screen is showing up) just to get to Windows Boot Manager and pressing tab to go to WMDT (additionally, if I press F8, black screen is all that I get). At first I waited to finish the test but I accidentally press ESC button and bam, the 'Starting Windows' appeared and it started. I don't know what's the root cause of this. I don't want to do that everytime I want to use my computer or restart it.
P.S: Before I have Windows 7 installed in this pc, I have Windows Vista. I reformatted all disk, delete any partition, made a new partition, and then installed Windows 7. It stuck up on the 'Starting Windows' screen without the logo appearing after the first restart (where there is a countdown or you can choose to manually restart it). I then tried to install it again (making a Windows.old in my pc) and it would stuck up again. I tried the three bootrec.exe commands and it fixed it and I was able to start and complete the installation process. After a few days, the problem stated above started to appear (where I need to go to WMDT just to start Windows). I installed Windows 7 again, formatting every disk. It stuck up again at 'Starting Windows' screen and then I thought 'what if I start WMDT, will the same thing happen?' so I turned my pc off, press space bar many times, tab, WDMT, ESC, and then voila, it started normal and was installed successfully.
P.P.S: I have a Hitachi Flora 330 DX1 Intel Pentium 4 HT 3.4 GHz. with 2.00 gb RAM. OS is Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601. Graphics card is Intel 946GZ Express Chipset Family.
View 7 Replies
View Related
Nov 18, 2012
This morning I tried starting it, the two options launch startup repair and launch windows normally were displayed. I clicked launch startup repair and after it said "loading files", it gave me a black screen for nearly 2 hours. Then I restarted and clicked launch normally. It took longer than usual, then took me back to the initial toshiba startup screen.I tried pressing f8 and booting in safe mode, but safe mode takes me back to the initial screen as well. I can't boot using last good configuration either.The laptop is about 2 years oldToshiba model # PSK2CU - 0QU01URunning Windows 7 Home Premium 64 bitunfortunately since it is not my computer, I do not possess more information besides what is on the label.
View 1 Replies
View Related
Dec 17, 2012
When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
View 1 Replies
View Related
Dec 10, 2012
I've a jar file which contains a very simple program of displaying "Hello" message in the console. I've pasted the code at the end of this thread.I want to run this jar file as a windows service. This service gets started without any hiccup,However,It simply wouldn't start the service. I've tried running this service as using NET and Sc command. But in vain. Below is the error I'm facing:
C:Windowssystem32>sc start MajaService
[SC] StartService FAILED with error 193.
Further, as a workaround I created a .bat file for executing this .jar file and again tried creating a window service for this .bat file,In this event i get the followingh error:
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
Below is my program:
import java.io.*;
class Hello implements Runnable{
Thread thread;
Hello(){
thread = new Thread(this, "Hello1");
thread.start();
} public void run(){
try {
while(true){
System.out.println("Hello");
Thread.sleep(500);
}}
catch(Exception e){}
} public static void main(String[] args){
Hello h = new Hello();
}}
View 3 Replies
View Related
Jan 21, 2013
I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.
My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.
View 3 Replies
View Related
May 25, 2011
Just finished installing Win 7 64 bit on my Dell Inspiron 1545. It appeared the update was going along smoothly until it came time to reboot. After rebooting, the laptop showed that it was configuring Windows. Once the configuration was completed the system went into Startup Repair. Once completed and checking the Repair Details it shows a message indicating that ci.dll is corrupt. I was able to restore the computer to original state, but once I downloaded the 80 or so win 7 updates, I get the same problem.
View 2 Replies
View Related
Jan 14, 2012
I was booted into Windows a couple of days ago, when without any reason what soever, I was logged off, and had to log in again. I checked Event Viewer, which showed: "The Desktop Window Manager was unable to start because a composited theme is not in use."
View 6 Replies
View Related
Dec 24, 2011
While running memtest86 on a bootable cd, it froze which I then restarted my computer. It is now unable to start up Windows 7 Ultimate x64. I can reinstall Windows but would like to know if the whole event damaged my hard drive. I can only start up to where the orbs make the Windows logo before it restarts. Also there is no noise, smoke or smell coming from my hard drive. Is it possible that it is damaged beyond use and repair? Also my BIOS seems to have changed the name of the Hard drive to SATA instead of HDD
View 9 Replies
View Related
Jan 20, 2012
Why does it takes too long to start web cam from web cam central,i have to adjust the screen lid multiple times,and always need to press web cam portion.I had removed the lid frame,to check the web cam,for looseness,but everything looks normal.
View 1 Replies
View Related
Nov 10, 2011
I have successfully created a Windows 7 Repair Disc using the "Create a system repair disc" from Control_Panel->Backup_and_Restore
When I attempt to reboot, using the Repair Disc I have just created, everything appears to work - Loads files, Windows wavy flag, etc. however; just as I am about to get into the real stuff I receive the following message:
This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.
This is exactly the ssame message I get if I boot from the original Window 7 DVD and elect Repair option
This is really important to me as when I use F8 during Post I do not have the options to repair the system here either and it freaks me a bit to be unable to repair the system should anything happen
View 2 Replies
View Related
Aug 23, 2012
Attached is all of the information. This is a new build, completed on saturday with a fresh install of Windows 7. I have ran memtest86 for 4 hours, completing 4 passes with no problems. I have reinstalled all motherboard drivers. I tried using driver verifier a few days ago and was unable to boot into windows without a BSOD. Was able to boot into safe mode to disable it. Have either been browsing on firefox, idle, or in a random application during each BSOD.
I have not yet had a BSOD while in safe mode (with or without networking). The BSOD tend to happen fairly often, with the longest time in between one occurring almost 20 hours. That only happened once, however, as all the other ones occurred within 5-10 hours of the computer being turned on. The next step I was going to take if I can't get a good answer would be to either reformat or do a "repair install" which I'd have to read up on before trying it.
View 9 Replies
View Related
Apr 22, 2012
I was playing Skyrim, closed it and steam and only had firefox running, left computer for ~5 min, when came back, I had BSOD. I shut computer and restarted it, now it gives on start BSOD.It has done this couple times before, but then it usually starts to work instantly after BSOD or after few hours offline and then reboot. Last time it did this (about couple weeks ago), I changed settings so it would make this log dump file, but now I cant get to windows and cant get the file.
BSOD:
STOP: 0x0000007B (0xFFFFF880009A97E8, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)
I can get to BIOS and to Repair Windows option.
---PC specs:
Windows 7 professional 64-bit
Agility 3 Series SSD, 60 GB [COLOR=#3485bd !important][COLOR=#3485bd !important]Core [COLOR=#3485bd !important]i7[/COLOR][/COLOR][/COLOR] 2600K LGA115, 3.4 GHz, 8MB
Corsair 600W CX V2 Builder Series, ATX, 80Plus
Coolink, processor cooler, Corator DC
Fractal Design Define R3 Black Pearl, ATX box
Samsung 1TB SpinPoint F3 3.5" SATAII, 32MB, 7200RPM [COLOR=#3485bd !important][COLOR=#3485bd !important]Kingston [COLOR=#3485bd !important]HyperX[/COLOR][/COLOR][/COLOR] 2x4GB, DDR3 1600MHz, CL9 [COLOR=#3485bd !important][COLOR=#3485bd !important]MSI [COLOR=#3485bd !important]GeForce[/COLOR][/COLOR][/COLOR] GTX 570 Twin Frozr III Power Edition
MSI P67A-GD55 B3, LGA1155, Intel P67, DDR3, SLI/CrossF
View 1 Replies
View Related
Aug 21, 2012
This is the report of the BSOD that happens when I start my PC.I have knowledge about computers but not enough to solve this problem. [code]
View 6 Replies
View Related
Apr 22, 2012
Using Tyan K8W Thunder s2885 in rack mount case. The board is over 10 years old. Dual AMD Opteron 250 processors, 64 bit. RAM 8 Gb. ATI Radion HD 3650, AGP. There is only the video card, driving a single LCD monitor, PSP mouse & USB keyboard, and the HDD attached to the board, no peripherals.I am installing Win 7 home Premium 64 bit. I have had Windows 7 running on this board for over a year, from an IDE 80 gig drive.I installed a new SATA 500 gb and have only that drive in the case.
I have to manually load 114R5_x64_15150_logo drivers for Sil Image SATA controller, from a USB drive. I have just spent a day learning about and using DISKPART to finally be able to start the install. The install starts OK, expands and loads files. About 2 minutes into 'expanding files' I get BSOD, STOP: 0x00000124,(0xFFFFFA800643F038,0X00000000B604A001,0X000000000000813)I have repeated the steps and reproduced the problem at about the same time into the install. I have no idea if there is a way to read/post a log. Since windows is not installed, there is not the usual dump available.
View 1 Replies
View Related
Jun 10, 2011
A client of mine (I'm an IT summer temp in a production facility) recently contracted the Windows 7 Recovery virus and contacted me to fix it. Having encountered the XP version recently and resolved the issue, I was able to easily remove the virus and associated rootkit. The difference this time was that unhide.exe failed to restore the start>all programs menu shortcuts, although it did manage to restore the folder structure. I read through and followed the instructions of another thread here: [URL]. Which did not resolve the issue. The output given by SystemLook is as follows:
SystemLook 04.09.10 by jpshortstuff
Log created at 09:14 on 09/06/2011 by debra
Administrator - Elevation successful
View 3 Replies
View Related
Jan 18, 2012
Started up my computer this morning to find that it blue screens on the windows start up logo. I didnt change anything in the BIOS or mess with anything in the system at all that would make it do this. It also blue screens when i try and go into safe mode. I tried start up repair, system restore, system image recovery, last known good start up..... every option available to me but to nothing works. I have tons of data on this computer so a clean reinstall is not an option. Ive been looking all over the web using my other computer to try and find an answer but cant find anything that works.I get this error on start up "STOP 0x00000074 BAD_SYSTEM_CONFIG_INFO"
View 9 Replies
View Related
Dec 9, 2012
I went to the toilet for 5 minutes and when I came back, my computer was off so I tried restarting it and this happened. Its my custom built PC. Its been fine for a few months but a few weeks ago, It said before start up: SATA3G_6 Hard Disk:S.M.A.R.T. Status BAD, backup and replace. I don't know whats happened.
Problem Event Signature: StartupRepairOffline
Problem Signature 01: 0.0.0.0
Problem signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 01
Problem Signature 07: unknown
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
I've not created a back up or a disk image file so It better not wipe the memory.
View 7 Replies
View Related
Jan 29, 2012
My laptop has been crashing rather frequently, and is starting to be a pain.
Microsoft Windows 7 Home Premium 64-bit, original installed OS on system, OEM. Bought in 2009. I have not re-installed the OS.
The BlueScreen that comes up has no line of data at the top on bold print! It has the STOP code at the bottom, but the screen only stays up long enough for it to quickly make a dmp file before it automatically reboots. Therefore, no idea what it's trying to tell me! Once it restarts successfully, the little window pops up with the BCCodes etc., and links to the Minidump folder.
Oldest saved Info (after the first time, when I was clueless and closed the window):
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: 0000000000000000
BCP3: FFFFF880039B2A28
BCP4: FFFFF880039B2280
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Newest saved Info:
View 1 Replies
View Related
Jun 10, 2012
I have been working on the problem for 2 days now and have gotten to various stages of working and not working. The issue at its worst will always BSOD when starting windows even using the various options. I have since then used the command prompt option form the install disc to run chkdsk and other repair options (fixmbr sfc /scannow) and am now able to boot into windows most of the time. Oh and sfc /scannow reports corruption but unable to fixI believe it is the work of some sort of malware but i have run updated versions of kaspersky and malwarebytes as well as rkill in an attempt to remove it but all report back that there is no malware. If that is the case then I feel like my drivers have been corrupted somehow and have replaced most of them but still get BSOD's but usually after I try to run a full security scan.
The only lead I have is the log file from sfc /scannow. Oh and most of my issues happened after running driver verifier so thats why I believe it is a corrupted driver and I recently believe that my Diablo 3 account was stolen by a keylogger but yet again using all the different security options that I have since downloaded found nothing including running avg with a linux disk at startup.Anyway Im sure i forgot to add stuff that I did but hopefuly we can figure it out i feel like my only uption is to do a repair install which i think I tried bu didnt work since my install drive is only 64GB and has 6 GB space left.
View 4 Replies
View Related
Sep 27, 2012
I had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs:
Processor: AMD FX-8120
Graphics Card: AMD Radeon HD 6850
RAM: 8GB 1866mhz
HDD: 500GB
View 8 Replies
View Related
Apr 15, 2012
I'm creativitRy and I followed the guide to remove smart HDD recently for a week, it was fine but one day (when i tried to start on my homework) my computer was unable to start!It just showed the windows logo and restart.I tried using safe mode and startup repair but nothing is working.I also do not have any backup because my computer is extremely slow
View 3 Replies
View Related
Jun 29, 2012
One of them tried to help me and I'm stuck now, Imported registry keys-access denied errors.
View 5 Replies
View Related
Nov 12, 2012
My computer was operating on battery, without warning the battery died. After plugging the computer to power and turning it back on, it takes me directly to:"Startup Repair" "Your computer was unable to start Startup Repair is checking your system for problems If problems are found, start up repair will fix them automatically. Your computer might restart several times during this process. No changes will be made to your personal files or information. This might take several minutes." Followed by a loading bar that says searching for problems. After leaving this on for a while it gives the system restore option, however this just takes me back to the previous screen. I cannot cancel the Start up repair and I can't access safemode. After searching for over an hour the only solution i've found so far is reinstall the OS, however my computer did not come with the OS disc
View 2 Replies
View Related
Dec 31, 2012
I have an asus u45jc laptop. I have had this problem so much. Basically when i start my computer, it would work. Then i shut it down. The next time i start my computer it would not work and then i need to shut it off and then turn it back on.
View 1 Replies
View Related
