BSoD After Windows 7 Start Up Window
Dec 9, 2012
I went to the toilet for 5 minutes and when I came back, my computer was off so I tried restarting it and this happened. Its my custom built PC. Its been fine for a few months but a few weeks ago, It said before start up: SATA3G_6 Hard Disk:S.M.A.R.T. Status BAD, backup and replace. I don't know whats happened.
Problem Event Signature: StartupRepairOffline
Problem Signature 01: 0.0.0.0
Problem signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 01
Problem Signature 07: unknown
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
I've not created a back up or a disk image file so It better not wipe the memory.
View 7 Replies
ADVERTISEMENT
Oct 27, 2012
I have a dell desktop computer with windows 7. As soon as you turn it on it goes straight to the "windows error recovery" screen where it has the option to either start system recovery or start windows normally. If I choose system recovery, it just gets stuck on a screen that looks similar to the backround of the loggin screen, but it's just the backround and my mouse. It will stay on this screen for hours until I turn it off. If I start windows normally, it will have the regular "starting windows" screen then it will flash back to the "windows error recovery" screen. If I try booting into safe mode, or loading the last good configuration, it will always bring me back to "windows error recovery". I have the 2 recovery disks I made when the computer was first bought, but when those are inserted, nothing happens and I'm not sure how to open them, it just always ends up at the "windows error recovery" screen. This computer is only about a year old and I have no idea what to do. I just need it to start up again.
View 1 Replies
View Related
Dec 14, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.
View 1 Replies
View Related
Aug 24, 2012
My drivers all seem to be up to date and the computer used to work fine, we've tried reinstalling windows (once or twice) and the same problem still continues. Also tried replacing the C: drive with another harddrive which had Windows Ultimate on it, this worked for a while but then went back to the screen that is the problem. Safe Mode works but once I start normally it starts up but then at the end of the flashing of the windows logo it says "Not Supported" on the monitor and you cannnot start it normally. I tried Microsoft's "Fix It" help option and came up with "The current video card driver isn't compatible with the Windows Display Driver Model" The graphics card is Asus EAH5870 (ATI Radeon HD 5800 Series), Asus P7P55D Motherboard and I am also running Windows 7 Home Premium 64bit.
View 7 Replies
View Related
Jul 8, 2012
I've a jar file which contains a very simple program of displaying "Hello" message in the console.I've pasted the code at the end of this thread.I want to run this jar file as a windows service.This service gets started without any hiccup,However,It simply wouldn't start the service.
I've tried running this service as using NET and Sc command.But in vain.Below is the error i'm facing C:Windowssystem32>sc start MajaService [SC] StartService FAILED with error 193.
Further, as a workaround I created a .bat file for executing this .jar file and again tried creating a window service for this .bat file,In this event i get the followingh error:
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
and below is my program:
-----------------------------------------------------------------------------------
import java.io.*;
class Hello implements Runnable
{
[Code].....
View 3 Replies
View Related
Aug 14, 2012
When I switch on the computer, on the monitor, I just see the start window and green dots running, then the monitor screen went black and say 'no signal', I can't even switch off the computer unless holding the switch button for a while.
View 2 Replies
View Related
Sep 13, 2012
After the window logo during bootup, BSOD appears.I find out that if i disable my Nvidia Display driver (in Safe mode), i could restart and get into windows. After which i update to the latest driver and i enable it, BSOD appeared after the window logo again.I have tried System Restore , but that is not working for me.
View 1 Replies
View Related
Nov 16, 2011
I have experience 2 BSOD in a day. I have followed the instruction to generate the report and attached to this post.
My notebook ASUS U36 spec is as follow
Window 7 Home Premium 64bit
Original installed version, OEM
Use the notebook for about 9months. OS also has been used for 9months. I reformatted it once using the recovery disc the moment I got my hand on the set.
View 1 Replies
View Related
Apr 22, 2012
I was playing Skyrim, closed it and steam and only had firefox running, left computer for ~5 min, when came back, I had BSOD. I shut computer and restarted it, now it gives on start BSOD.It has done this couple times before, but then it usually starts to work instantly after BSOD or after few hours offline and then reboot. Last time it did this (about couple weeks ago), I changed settings so it would make this log dump file, but now I cant get to windows and cant get the file.
BSOD:
STOP: 0x0000007B (0xFFFFF880009A97E8, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)
I can get to BIOS and to Repair Windows option.
---PC specs:
Windows 7 professional 64-bit
Agility 3 Series SSD, 60 GB [COLOR=#3485bd !important][COLOR=#3485bd !important]Core [COLOR=#3485bd !important]i7[/COLOR][/COLOR][/COLOR] 2600K LGA115, 3.4 GHz, 8MB
Corsair 600W CX V2 Builder Series, ATX, 80Plus
Coolink, processor cooler, Corator DC
Fractal Design Define R3 Black Pearl, ATX box
Samsung 1TB SpinPoint F3 3.5" SATAII, 32MB, 7200RPM [COLOR=#3485bd !important][COLOR=#3485bd !important]Kingston [COLOR=#3485bd !important]HyperX[/COLOR][/COLOR][/COLOR] 2x4GB, DDR3 1600MHz, CL9 [COLOR=#3485bd !important][COLOR=#3485bd !important]MSI [COLOR=#3485bd !important]GeForce[/COLOR][/COLOR][/COLOR] GTX 570 Twin Frozr III Power Edition
MSI P67A-GD55 B3, LGA1155, Intel P67, DDR3, SLI/CrossF
View 1 Replies
View Related
Aug 21, 2012
This is the report of the BSOD that happens when I start my PC.I have knowledge about computers but not enough to solve this problem. [code]
View 6 Replies
View Related
Jan 18, 2012
Started up my computer this morning to find that it blue screens on the windows start up logo. I didnt change anything in the BIOS or mess with anything in the system at all that would make it do this. It also blue screens when i try and go into safe mode. I tried start up repair, system restore, system image recovery, last known good start up..... every option available to me but to nothing works. I have tons of data on this computer so a clean reinstall is not an option. Ive been looking all over the web using my other computer to try and find an answer but cant find anything that works.I get this error on start up "STOP 0x00000074 BAD_SYSTEM_CONFIG_INFO"
View 9 Replies
View Related
Nov 18, 2012
in the middle of playing a online mmo the blue screen came up. Restarted and now windows fails to start. I have tryed to use start up recovery option and it try's to start but before start up repair screen comes up and my only option is to restart. The error code is
0x0000001e (0xffffffffc0000005 , 0xfffff8001b0eb505 , 0x0000000000000000 0xffffffffffffffff)
And another is
*** stop: 0x00000024 (0x0000000000001904fb, oxfffff880029c72e8, 0xfffff880029c6b40, 0x0000000000000000)
And yet again
*** stop: 0x0000007e (0xffffffffc0000005, 0xfffff8000c203617 , 0xfffff880009a8a38, 0xfffff880009a8290)
And so on, I have not seen a named driver at all so I have no idea where to go here the computer was running fine before and I built it only 3 weeks ago and have done no updates or software changes in the last week.
View 2 Replies
View Related
Apr 2, 2012
I'm running Windows7 with IE9. If I go to "Start - Favorites" and select any of my favorites (including my homepage), IE opens the browser as a "small" window (not fit to screen). If I navigate to my "User - Favorites" folder and click from there, it's the same thing. However, if I click on my IE icon in my taskbar, my homepage opens "full" every time. I would like my favorites to also open to fit the screen.
I have tried, (the obvious) maximizing it then closing it normally, dragging the edges of the small window to fit the screen and then closing with "x" and also with "ctrl-file-exit" and "shift-file-exit" - the only suggestions I've been able to find so far, but nothing is working. In my start menu - programs, I have right clicked on both the 32 and 64 bit IE Explorer icons and selected for them to open maximized, but it hasn't helped.
I recently had a run in with the "SmartHDD" virus, but this problem existed long before that issue. I have done a reset on the browser, after the smarthdd issue, I reinstalled the browser, but I'd assume there may be something other than the browser causing this problem(?)Scans with AVG, Spybot, Malwarebytes, Superantispyware are not showing any problems with the pc.
View 3 Replies
View Related
Oct 25, 2009
When I loaded Office '07 after Windows 7 install, all works fine except when I start Outlook, an error message as follows, pops up:
"Cannot start Microsoft Office Outlook. Cannot open the Outlook window."
Anyone else get this?
View 4 Replies
View Related
Jan 29, 2012
My laptop has been crashing rather frequently, and is starting to be a pain.
Microsoft Windows 7 Home Premium 64-bit, original installed OS on system, OEM. Bought in 2009. I have not re-installed the OS.
The BlueScreen that comes up has no line of data at the top on bold print! It has the STOP code at the bottom, but the screen only stays up long enough for it to quickly make a dmp file before it automatically reboots. Therefore, no idea what it's trying to tell me! Once it restarts successfully, the little window pops up with the BCCodes etc., and links to the Minidump folder.
Oldest saved Info (after the first time, when I was clueless and closed the window):
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: 0000000000000000
BCP3: FFFFF880039B2A28
BCP4: FFFFF880039B2280
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Newest saved Info:
View 1 Replies
View Related
Jun 10, 2012
I have been working on the problem for 2 days now and have gotten to various stages of working and not working. The issue at its worst will always BSOD when starting windows even using the various options. I have since then used the command prompt option form the install disc to run chkdsk and other repair options (fixmbr sfc /scannow) and am now able to boot into windows most of the time. Oh and sfc /scannow reports corruption but unable to fixI believe it is the work of some sort of malware but i have run updated versions of kaspersky and malwarebytes as well as rkill in an attempt to remove it but all report back that there is no malware. If that is the case then I feel like my drivers have been corrupted somehow and have replaced most of them but still get BSOD's but usually after I try to run a full security scan.
The only lead I have is the log file from sfc /scannow. Oh and most of my issues happened after running driver verifier so thats why I believe it is a corrupted driver and I recently believe that my Diablo 3 account was stolen by a keylogger but yet again using all the different security options that I have since downloaded found nothing including running avg with a linux disk at startup.Anyway Im sure i forgot to add stuff that I did but hopefuly we can figure it out i feel like my only uption is to do a repair install which i think I tried bu didnt work since my install drive is only 64GB and has 6 GB space left.
View 4 Replies
View Related
Sep 27, 2012
I had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs:
Processor: AMD FX-8120
Graphics Card: AMD Radeon HD 6850
RAM: 8GB 1866mhz
HDD: 500GB
View 8 Replies
View Related
Jan 26, 2011
I'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
View 1 Replies
View Related
Feb 16, 2012
Whenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
View 6 Replies
View Related
Aug 22, 2012
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
View 5 Replies
View Related
Mar 30, 2012
I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
View 8 Replies
View Related
Apr 12, 2012
every morning we get at least 5 BSOD's before our system actually decides to work. I am not fast enough to catch the error codes as it dumps the files too fast. I complete the system restore and i get BSOD a few more times, and it even just cycles and won't start. i need to make sure i have a hardware issue before returning it to the place i brought it from or they will charge me lots to fix. I also re-installed windows 2 weeks ago, and it worked fine for a week, before returning
View 4 Replies
View Related
Dec 9, 2011
Ive been having bsod for a while now. I have a sony vaio .I've tried restoring my laptop and it wouldn't get rid of it. And i don't think it's anything that I've downloaded that Is effecting it because I resorted it . And now I can't even get into my computer... The error is 0xe00000000 I believe , but there were some other errors
View 1 Replies
View Related
Jan 9, 2012
i have been getting bsod on vista, 7 32bit and now in clean install 64bit i bought new ram memorys and that helped little bit 2x2gig. ddr2 and 512mb ddr2, if i take that 512mb ddr2 away from computer this will get a lot of slower and gets a lot of more bsod.
now i mostly get bluescreen when i am at Internet etc.
View 1 Replies
View Related
Jan 12, 2012
Two months ago, I bought a number of components and assembled my PC, using Windows 7 Home 64-bit.A few times a week during 'cold' start-up, I get a BSOD with STOP id 0x000F4. There are also 'cold' start-ups that are successful. When I do a restart or a shutdown followed by a start-up this problem has never occured yet.What is always the case is that the BSOD hangs in the phase "initializing disk for crash dump" and the led of the harddisk is burning constantly, but nothing happens. As a consequence, I do not have a crash dump file of this problem.I did already a complete reinstall with the OS of my system, but the problem remains. The tests of the disk, memory and graphics acard are ok.
View 6 Replies
View Related
Jun 20, 2012
I have recently been experiencing a BSOD everytime i startup (in normal or safe-mode) around 40-50 minutes after startup. It seems to just shut down every program then go to BSOD while is able to create a dump file but never automatically restart.I've also used spy-bot and Malwarebyte to find any corruptions or viruses and nothing fixed the problem. I've google'd and couldn't find anything to my predicament from other BSOD's. I personally think it's the RAM going bad (this is a built computer by a friend about 8 months ago, top of the line gamer computer, windows 7 ultimate).
View 7 Replies
View Related
Jul 16, 2012
Windows 7 Home 64 bit2010 original software on latoI keep getting the BSOD in normal mode after a few minutes of starting my laptop. It is giving me the error PAGE_FAULT_IN_NONPAGE and it is saying that it is caused by driver "ntoskrnl.exe" I have attached the dump and system report
View 1 Replies
View Related
Jan 25, 2010
I recently built a computer- cpu, i5 750, mobo, P55A-UD5, 4gb of g.skill eco, a second 9800GT to compliment my first one and a new seasonic x-series 750W, running windows 7 ultimate 64bit. I have built quite a few computers but with this one all the right drivers are installed but every time i shut down my computer for the night and get back on it in the morning instant BSOD every time i start it up. Then when i restart it it BSOD again, and again and again until i go into bios and load fai safe defaults even though it is on the default settings or if i remove one of the graphics cards when setting failsafe defaults doesn't work.
then eventually it will start again with out BSOD till the next morning. Now i have a slight feeling it could be the graphics. I have tested my HDD's and my ram. The thing with the graphics cards is that i've had the first one an MSI one for a few years it uses a 6pin mobo connector and has slightly higher clocks compared to my xfx one but the xfx one doesn't have a power connector (i think its a newer design) it also has lower clocks.
I don't know if it is the graphics cards or the drivers that are having issues it seems that if i remove one of the cards (the xfx one) windows will boot fine then i can whack it back in and do some gaming. Another thing might be the ram it is that new eco stuff from g.skill that uses 1.35v but my mobo doesn't like that so it puts it to 1.5v, but i'm am not sure. If you need any of the report files from windows just say. the graphics drivers i'm using for sli were the 196.21 nforce windows 7 64 bit drivers.
View 11 Replies
View Related
Jan 3, 2013
on friday i got hit wit some ransomware got rid of it and now it seems like my PC has gotten worse since it takes sometimes up 10 minutes to start up and i have already seen the BSOD on two occasions.so whats the problem do i need to do a full on recovery, by a new pc or can this problem be fixed. i am running windows 7 hp 64 bit I believe
View 2 Replies
View Related
Feb 13, 2012
my computer is about 2 years old. It first came with Windows vista 64. A few months ago I got a hold of a copy of windows 7 pro 32, so I wanted to check it out, even If I was going to take a hit on ram. Well now I have Windows 7 Ultimate 64, but after doing a fresh install I kept getting BSOD after the windows logo. I was able to complete the setup after removing all my ram except for one stick. The same problem persists after setup. I can boot up in safe mode just fine with all of my ram.
[code]...
View 1 Replies
View Related
May 7, 2012
I was just sitting there doing nothing but just watching my screens (live financial charts) when all of a sudden the screen saver (I have "Mystify" setup) trying to start because I did not touch the keyboard and mouse for a few minutes. Then 2 of the 4 screen went blank and the remaining 2 froze and just gave me BSoD. This BSoD is not the first one and I suspect the screen saver is missing some files, etc. or Windows is corrupted. I think all my drivers are updated (with SlimDriver freeware). This time, the BSoD - as I recall it had a IRQL_. message at the top.
View 9 Replies
View Related
