After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.
View 1 RepliesAfter rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER, so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.. what to do from Safe Mode to return my boot up back to normal?
View 4 Replies View RelatedAfter rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode..what to do from Safe Mode to return my boot up back to normal?
View 2 Replies View RelatedIt's my daughter's computer. A little e-Machine, 250G HD, Windows 7 32-bit on it. Out of nowhere her computer wouldn't boot up. I can get it to try to boot using the Windows disk, it gets so far, and then the repair fails saying:
The file or directory C:/Boot is corrupt and unreadable. Please run chkdsk utility.
I try to re-install. she had backed up everything on my external just days before. It gets near the end, and then the same error comes up. I cannot get into anything else. Nothing else will load. I don't even know how I can run chkdsk. Unfortunately the computer is about three years old and she can't remember the specifics except there is only one HD in it. She had no internet at her place so it's not because she suddenly installed something. She was using it to watch movies and listen to music mostly. I'm at wits' end, can't figure it out.
sony vaio PCG-71314L
on turning on, hangs at "windows is starting" for ever
F10 says "disc read error"
F8 says "no operating system found"
booting/repairing/reinstalling from CD hangs at "windows is loading" for ever
how could i get it to boot/repaired/reinstalled?losing all data on HDD is fine, just need to make it work again.
I had Intel DG31PR motherboard and I recently changed it to a Intel DG41RG board. I intalled Windows 7 and it worked very well with DG31PR but when I try to intall it with DG41RQ the setup completes successfully(it boots itself from hard disk during installation several times without any problem) and when Windows 7 tries to boot itself for the first time it fails. After loading BIOS I get a blank screen. It happens with both x64 & x32 but other windows such as XP and Vista works fine. I tried my copy of Windows 7 with several other computers including one having Core i3,DH55TC and windows 7 installs and works in them very well. I tried 2 genuine DG41RQ motherbords but the problems persists
View 9 Replies View Relatedwith my custom built desktop. My custom built has been acting up like mad only a month after creation. It worked perfectly at first, but then I suddenly found that half of my services were disabled randomly. As well, my computer kept connecting with limited access to my household wireless connection, quite simply meaning I couldn't connect to the internet.Eventually, after throwing all the solutions I could find on the net at it (sfc/scannow, system restore, enabling the systems manually through and elevated control panel and even upgrade installs (with the original OEM system builders disc), I gave up and did a complete reinstall, wiping everything on my hard drive and starting again.Unlike the upgrade install I attempted, this actually worked and my computer worked perfectly...until I updated windows. After downloading the 53 updates windows update thought I needed, when I booted up my computer the next time, the internet stopped working again, with half of my services stopped (including Diagnostics Repair).Now every time I boot up my computer, I come to a Startup Repair screen that fails every time.Here is the message I get: Startup Repair cannot repair this computer automaticallyProblem signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02: 6.1.7600.16385Problem Signature 03: unknownProblem Signature 04: 21200686Problem Signature 05: AutoFailoverProblem Signature 06: 3
View 9 Replies View RelatedI received recovery discs from acer. First I deleted the 100 mb partition as per acer and ran the recovery. It finished and the system rebooted however I received the following boot error msg: Windows boot mgr.Windows failed to start. A recent hardware or software change may be the cause.
1. Insert your windows install disc and restart.
2. choose your language settings and click "next".
3. Click "repair your computer"
File BootBCD
Status: 0xc0000225
Info: an error occurred while attempting to read the boot configuration data.
It is my understanding from acer that windows 7 is re-installed from the recovery discs. Don't understand why this msg. Dont have any windows 7 discs. The acer logo does come up after boot but goes directly to the screen with the above info.
I received recovery discs from acer. First I deleted the 100 mb partition as per acer and ran the recovery. It finished and the system rebooted however I received the following boot error msg:Windows boot mgr.Windows failed to start. A recent hardware or software change may be the cause.To fix this problem:1. Insert your windows install disc and restart.2. choose your language settings and click "next".3. Click "repair your computer"File BootBCDStatus: 0xc0000225Info: an error occurred while attempting to read the boot configuration data.It is my understanding from acer that windows 7 is re-installed from the recovery discs.Don't understand why this msg. Dont have any windows 7 discs. The acer logo does come up after boot but goes directly to the screen with the above info. Does anyone know how to fix? Please explain in laymans terms as I am not very knowledgeable in this field. Of course acer wants me to send in for paid repairs.Computer is 1 1/2 yrs. old. acer 7741z
View 1 Replies View RelatedMy Laptop running Windows 7 gives an error when trying to boot and leads me to the Startup Repair. Startup Repair then gives the following message:Startup Repair Cannot repair this computer automaticallywith an option to Send Information or not to Send Information The Problem details log leaves the following information:Problem signature:Problem Event Name: StartupRepairOfflineProblem Event Signature 01: 6.1.7600.16358Problem Event Signature 02: 6.1.7600.16358Problem Event Signature 03: unknownProblem Event Signature 04: 21201029Problem Event Signature 05: External MediaProblem Event Signature 06: 11Problem Event Signature 07: NoBootFailureOs Version: 6.1.7600.2.0.0.256.1Locale ID: 1033I tried using the Windows 7 disk to go back to a previous restore point before the problem occurred and I received this error message again after starting with out the Windows 7 disk
View 1 Replies View RelatedUsing the tutorial at Repair Install I am attempting to repair Windows 7 Professional but at step 6 A) of the tutorial the following message is displayedWindows could not update the installation files. To install Windows, close Setup and restart the installation. Error code 0x0I wohow to proceed as I believe I have complied with the the steps thus far as set out in the tutorial
View 4 Replies View Relatedi have windows 7 ultimate and after the welcome and some times at welcome window it freezes.what can i do?
View 2 Replies View RelatedLast night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View RelatedMy dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
This maching was turned off and unplugged while owner went on vacation.On return it just goes to the auto repair parocess every power up.Went to DOS prompt and the drive with windows on it was given the letter D, the system partition was given C.I tried bootrec /rebuildbcd and /fixboot to no avail. Then I assigned the windows partition to C and the system partition to D and tried again to no avail.I have removed this drive and scanned it on another PC as a secondary drive and found nothing other than cookies with Malwarebytes, SuperAntiSpyware as well as nortons. I also looked for rootkit with TDSSkiller. After renaming cbs.log I looked in D;windowslogscbs after doing a sfc /scannow process for the repair log and there was none created. I looked on the system boot drive "C" but of course there was no windows folder so I created a windows/logs/cbs folder to see it it might be created there, it wasn't.This appears to not be due to a bug but maybe a shutdown while it was in hibernation or something like that.
View 2 Replies View RelatedI'm trying to repair my Windows 7 ultimate installation. When the procedure reaches its final step, I keep getting a message that the repair failed and that my system is being restored to its former state.Is there a way to depict the cause of this failure? Does Windows 7 keep a log? Is it accessible?Do you know of any other method to overcome this obstacle?
View 8 Replies View RelatedI was attemping to restore my computer back to previous days and as it was retrieving the data and processing, I got anxious and turned it off during the restoring before it finished and when I attemped to turn the power back on, only the "starting windows" and "gateway" logos flash on and off but no start up process. Please help, I know I screwed up, but I've already tried the SAFE MODE, SAFE MODE in networking, and the "last configuration" attemps and none of them rectify the problem.
View 2 Replies View RelatedI recently built a new computer and on occasion when I turn the computer on, I'll get a blue screen saying windows failed to load type thing, and then it restarts and i have to recover. Now the weird thing is it doesn't happen all the time It more often than not doesn't work, but still there will be times where it works all day. I can't figure out why it works sometimes and not others. I don't do anything different, just facebook and Star Wars the Old Republic, so I don't think its a program which is causing the issue. Anyway here are my comp specs and the problem details:
Intel i5 2500 3.30GHz
Gigabyte GTX560OC
C/Master Extreme 700W
WD 1TB Black
Gigabyte GA-Z68AP-D3
LG DWDRW
8GB of RAM
Now the problem
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 6b
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
My Dell Studio 17 shut down yesterday after sitting idle. Now i cannot boot windows. I get this endless loop that ultimately leads me to startup repair which either hangs or errors out. Attempting to start in safe mode takes me to same place.I know the root of the problem is bsod as I see it flash when attempting to load windows.I was able to launch system restore tool from advanced options (f8) but after selecting restore point the cpu seems to hang after over an hour of Initalizing.I can bring up command prompt by the way.
View 3 Replies View Relatedi have an acer and it was working fine and when i turn it on it starts to load up as normal an then it goes to this black screen an at the top it say window error recorvery an then goes on saying windows failed to start. recent hardware or software change might be the cause. if windows files have been damaged or configured incorrectly. startup repair can help daignose and fix problem. if pawer was interrupted during startup choose start wundows normally. then it offer the option to launch startup repair or start window as normally i tried both option an it just goes right back to this screen an i cant figure out whats wrong college student?
View 3 Replies View RelatedThis happened to me a few weeks ago and I haven't been able to resolve it since, so I'm turning here for assistance. One fine evening, I come home and notice that my computer is giving me an error message:
Windows failed to start. A recent hardware or software change might be the problem.
I am then told to insert my installation CD, reboot, and follow some steps. There is one problem: I do not have an installation CD. I upgraded my erratic copy of Windows Vista to 7 (Premium 32bit I believe) last year as part of the $30 upgrade for students program, and did so online. I tried using friends' installation disks of various editions to no avail, and when I boot directly from the disks it either gives me the option to reinstall or gives me the same error message (0xc0000001, BootBCD). I tried to track down my purchase information, but the email address I used to make the purchase no longer exists and my online banking service doesn't keep records past 6 months (I made the upgrade roughly a year ago). My question is, what can I do to fix this? Do I have to reinstall and lose all my data, is there a problem with the computer itself (this is not the first OS to be bucked off, it rejected Vista last May), or can I get what I need to run a system repair somehow?
Edit: Forgot to mention, the only software change I have made in the last few weeks is uninstalling Firefox and installing Chrome, and I don't think that would be the issue.
Lately my welcome screen became very slow, it takes 3-4 minutes to load and then a black screen with a mouse cursor comes up for 30 seconds then the actual windows come, when windows start the network icon has a red cross on it and says not connected - no connections available but the internet is just fine, and it says failed to load windows service. Is that a virus? i scanned with AVG 2012 and Malware bytes and problem is still there .
View 14 Replies View Relateddoes anyone know what I can do about this problem?
View 1 Replies View Relatedevery time i turn on my laptop, a startup repair window pops up and then when it's done solving the problems it shuts down. when i try opening it again the startup window appears.
View 1 Replies View RelatedI have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies View RelatedI'm running Windows 7 64 bit on a gigabyte ga-x58a-ud3r
A few weeks ago, I shut down my PC completely for a regular cleaning. I do a regular cleaning once a month, this was the first time I had an issue.
After I finished, I powered up the machine, and Windows would continually fail to start - rebooting at some point while the Logo load screen was up.
After several Google searches, I tried pretty much everything I could think of or advice i came across - Nothing worked. I could not boot from the Win7 Disk, System Repair did not work, advanced boot options did not work, etc. At this point I thought the HDD might be bad (WD Caviar Black 1 TB).
So I went and purchased a new HDD, the same model actually as it was on sale. Windows installed fine, everything got up and running with no issue.
I then took my HDD which I had believed had failed and plugged it into a Thermaltake BlacX Docking station and I was able to locate the drive in the device manager after scanning for new hardware.
I actually was able to go into the hard drive and recover the few bits of data I hadn't backed up (mostly gaming files). The HDD was completely fine. Fast forward a few weeks, and feel free to laugh at me here - I'm in the exact same situation with the new HDD once again after cleaning my PC case.
So, I'm not sure what is happening. I've rebooted the PC many times without issue but today was the first time that I fully powered down the PC to do a cleaning.
I suspect something is causing Windows to fail to recognize the HDD itself, but honestly this is way beyond my knowledge how to fix. I took a risk and I removed the sata cable from the "GSata" slot on the motherboard and put it into one of the standard ICHR10 - to no effect.
I've once again exhausted every option I actually know how to safely do, advanced boot options, repair attempt from Win7 Disk, etc. Nothing is working. I'm debating running out yet again and grabbing a cheap HDD just to get myself up and running again, but I thought I'd turn to Tom's Hardware first for some ideas - and because I don't want to be going through this issue everytime I want to give the PC case a good cleaning.
I went to the toilet for 5 minutes and when I came back, my computer was off so I tried restarting it and this happened. Its my custom built PC. Its been fine for a few months but a few weeks ago, It said before start up: SATA3G_6 Hard Disk:S.M.A.R.T. Status BAD, backup and replace. I don't know whats happened.
Problem Event Signature: StartupRepairOffline
Problem Signature 01: 0.0.0.0
Problem signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 01
Problem Signature 07: unknown
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
I've not created a back up or a disk image file so It better not wipe the memory.
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies View RelatedBasically, my computer fails so start-up sometimes (My motherboard produces a long beeep sound. GPU not running at all, but the rest of the components seems to be running - eg. USB, Ethernet etc).Also, it will sometimes freeze while running some basic programs which are not really RAM or GPU demanding such as web browsers.Finally, BSOD whenever I'm running some graphically intensive games (which theoretically, my computer should be able to handle.I've ran memtest86 for each of my ram and there were no signs of any ram defunct. Therefore, I'm speculating that the problem is either the GPU, CPU or the Motherboard itself. However, I'm not sure which one should I change. I've attached my 3 dump files, all of which seems to point to different sources of error.[CODE]
View 1 Replies View RelatedMy lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
View 1 Replies View RelatedI Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.