i have an acer and it was working fine and when i turn it on it starts to load up as normal an then it goes to this black screen an at the top it say window error recorvery an then goes on saying windows failed to start. recent hardware or software change might be the cause. if windows files have been damaged or configured incorrectly. startup repair can help daignose and fix problem. if pawer was interrupted during startup choose start wundows normally. then it offer the option to launch startup repair or start window as normally i tried both option an it just goes right back to this screen an i cant figure out whats wrong college student?
I was attemping to restore my computer back to previous days and as it was retrieving the data and processing, I got anxious and turned it off during the restoring before it finished and when I attemped to turn the power back on, only the "starting windows" and "gateway" logos flash on and off but no start up process. Please help, I know I screwed up, but I've already tried the SAFE MODE, SAFE MODE in networking, and the "last configuration" attemps and none of them rectify the problem.
I recently built a new computer and on occasion when I turn the computer on, I'll get a blue screen saying windows failed to load type thing, and then it restarts and i have to recover. Now the weird thing is it doesn't happen all the time It more often than not doesn't work, but still there will be times where it works all day. I can't figure out why it works sometimes and not others. I don't do anything different, just facebook and Star Wars the Old Republic, so I don't think its a program which is causing the issue. Anyway here are my comp specs and the problem details:
Intel i5 2500 3.30GHz Gigabyte GTX560OC C/Master Extreme 700W WD 1TB Black Gigabyte GA-Z68AP-D3 LG DWDRW 8GB of RAM
Now the problem Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 3081
Additional information about the problem: BCCode: 6b BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1
My Dell Studio 17 shut down yesterday after sitting idle. Now i cannot boot windows. I get this endless loop that ultimately leads me to startup repair which either hangs or errors out. Attempting to start in safe mode takes me to same place.I know the root of the problem is bsod as I see it flash when attempting to load windows.I was able to launch system restore tool from advanced options (f8) but after selecting restore point the cpu seems to hang after over an hour of Initalizing.I can bring up command prompt by the way.
This happened to me a few weeks ago and I haven't been able to resolve it since, so I'm turning here for assistance. One fine evening, I come home and notice that my computer is giving me an error message:
Windows failed to start. A recent hardware or software change might be the problem.
I am then told to insert my installation CD, reboot, and follow some steps. There is one problem: I do not have an installation CD. I upgraded my erratic copy of Windows Vista to 7 (Premium 32bit I believe) last year as part of the $30 upgrade for students program, and did so online. I tried using friends' installation disks of various editions to no avail, and when I boot directly from the disks it either gives me the option to reinstall or gives me the same error message (0xc0000001, BootBCD). I tried to track down my purchase information, but the email address I used to make the purchase no longer exists and my online banking service doesn't keep records past 6 months (I made the upgrade roughly a year ago). My question is, what can I do to fix this? Do I have to reinstall and lose all my data, is there a problem with the computer itself (this is not the first OS to be bucked off, it rejected Vista last May), or can I get what I need to run a system repair somehow?
Edit: Forgot to mention, the only software change I have made in the last few weeks is uninstalling Firefox and installing Chrome, and I don't think that would be the issue.
Lately my welcome screen became very slow, it takes 3-4 minutes to load and then a black screen with a mouse cursor comes up for 30 seconds then the actual windows come, when windows start the network icon has a red cross on it and says not connected - no connections available but the internet is just fine, and it says failed to load windows service. Is that a virus? i scanned with AVG 2012 and Malware bytes and problem is still there .
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.
I'm running Windows 7 64 bit on a gigabyte ga-x58a-ud3r
A few weeks ago, I shut down my PC completely for a regular cleaning. I do a regular cleaning once a month, this was the first time I had an issue.
After I finished, I powered up the machine, and Windows would continually fail to start - rebooting at some point while the Logo load screen was up.
After several Google searches, I tried pretty much everything I could think of or advice i came across - Nothing worked. I could not boot from the Win7 Disk, System Repair did not work, advanced boot options did not work, etc. At this point I thought the HDD might be bad (WD Caviar Black 1 TB).
So I went and purchased a new HDD, the same model actually as it was on sale. Windows installed fine, everything got up and running with no issue.
I then took my HDD which I had believed had failed and plugged it into a Thermaltake BlacX Docking station and I was able to locate the drive in the device manager after scanning for new hardware.
I actually was able to go into the hard drive and recover the few bits of data I hadn't backed up (mostly gaming files). The HDD was completely fine. Fast forward a few weeks, and feel free to laugh at me here - I'm in the exact same situation with the new HDD once again after cleaning my PC case.
So, I'm not sure what is happening. I've rebooted the PC many times without issue but today was the first time that I fully powered down the PC to do a cleaning.
I suspect something is causing Windows to fail to recognize the HDD itself, but honestly this is way beyond my knowledge how to fix. I took a risk and I removed the sata cable from the "GSata" slot on the motherboard and put it into one of the standard ICHR10 - to no effect.
I've once again exhausted every option I actually know how to safely do, advanced boot options, repair attempt from Win7 Disk, etc. Nothing is working. I'm debating running out yet again and grabbing a cheap HDD just to get myself up and running again, but I thought I'd turn to Tom's Hardware first for some ideas - and because I don't want to be going through this issue everytime I want to give the PC case a good cleaning.
Basically, my computer fails so start-up sometimes (My motherboard produces a long beeep sound. GPU not running at all, but the rest of the components seems to be running - eg. USB, Ethernet etc).Also, it will sometimes freeze while running some basic programs which are not really RAM or GPU demanding such as web browsers.Finally, BSOD whenever I'm running some graphically intensive games (which theoretically, my computer should be able to handle.I've ran memtest86 for each of my ram and there were no signs of any ram defunct. Therefore, I'm speculating that the problem is either the GPU, CPU or the Motherboard itself. However, I'm not sure which one should I change. I've attached my 3 dump files, all of which seems to point to different sources of error.[CODE]
My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
I switched my medion akoya i3 1tb (running windows 7) pc on this morning and up popped startup repair. When it had finished it gave me the option to do a system restore which I tried to do but then I got a message saying
"system restore did not complete successfully. Your computer's system files and settings were not changed.
Details: system Restore failed while deleting the following file/directory D:windowssystem32catroot{F750E6C3-38EE-11D1-85E5-00004FC295EE}Package"
I dont know what to do as I cant get my pc to startup properly
I have one program in the start menu that will not start , I have to start it manually when I re-start win 7 . Ideas ? I did have a program to give programs admin permissions so they would start automatically but can't seem to find it ..
Computer crashes for no reason then fails to start. I get half of the post screen which says 1 Keyboard 2 Mice 1Hub then nothing? It should show all the HDD installed next but nothing shows. The only way of getting the computer to boot after this is to disconnect SSD from the motherboard? Any Ideas guys and gals...
I downloaded the demo of Race Driver - Grid from the Codemaster's web-site. While it installed and lets me create a profile, to start the game it states "Loading", with no hard-disk activity and just stops at that point. Leaving it for 10 minutes results in nothing happening. Anyone else experience this?
my laptop dell inspirion windows 7 n5110 64bit is not starting..when i am switching on it repeatedly showing dell logo and not moving to the windows page.
I have a program running that automatically syncs some of my data online. It is running on a computer with Windows 7 Pro as well as a Windows Server 2003 that I use as for file storage. Unfortunately it does not startup until I log into a profile, but since I don't really use these computers, sometimes this doesn't happen for days on end. I decided to create it as a service (used the sc.exe utility - sc create DataBackup binPath= "C:Program FilesData Deposit Boxackup.exe" DisplayName= "Kineticd Backup" start=auto). The service was created successfully, but when I try to start the service, I get the following error.
Error 1053: The service did not respond to the start or control request in a timely fashion
1) On Lock: Execute the following batch: Code: TASKKILL /F /IM "pnamain.exe"
TASKKILL /F /IM "Receiver.exe TASKKILL /F /IM "WFICA32.EXE" This kills the open Citrix session and shuts down all citrix programs.
2) On Unlock: Reconnect the Citrix Session and open all programs via this batch: Code: start "" "C:Program FilesCitrixICA Clientpnamain.exe" /connect start "" "C:Program FilesCitrixICA ClientReceiverReceiver.exe" If i execute the 2 batch-files manually, everything works perfect. If they are run via the scheduled tasks, the locking works perfectly, but the unlocking behaves as following: pnamain.exe is started Receiver.exe is NOT started EDIT: The task is marked as 'finished without problems' I tried to execute this task with different settings... same problem all the time The Task is executed with the Admin-Account, so this should not be the problem.
On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.
My Event Viewer is peppered with: Event 7003, Service Control Manager The DHCP Client service depends the following service: Afd. This service might not be installed. Event 7001, Service Control Manager The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not exist or has been marekd for deletion.
And that keeps repeating many times in a minute (about 30-40 cycles of it).
My ACER 4738g is not starting up, intially after the bios screen, the next screen is resuming windows and after its stuck with message ''setup is starting services''. Nothing is happening after that. I do have a boot CD and i tried ALT+F10 also.
Laptop wont start up it has a scratching sound on and off and it shows a message saying connection cable no bootable device ,how can I reboot without disk?
Acer 4630 Keeps going to other user.i try F8 and i get a list of what to do iv tried most of them and they all bring me to login on "other user".i dont have a password for this.when i type something random it says "The specified Domain either does not exist or could not be contacted.
Got software restore. Can't start from disc. Changed boot order, nothing. f8, f10, f12,got my no where. Won't start in safe mode. I don't have the options that the instructions with the discs say I should have. Here are my options:
1. Goes to eRecovery and just sticks there with a blue spinning wheel
2. Goes to f8 menu with no option for recovery or repair. When trying to start normally it goes to a blue screen with an error message that is gone to fast to read. Restarts
3. Goes to black screen with some unreadable stuff except for the word "failure". Restarts
I have a Compaq Presario CQ56 64-Bit (Windows 7 Home Premium) laptop that I bought before the summer, today a Windows Update has given me an Acer display update published on the 28/12/2011. I thought because I had my vga cable plugged into the TV Windows Update may have become confused but despite checking for updates again it still appears there as optional.
AMD/ATI is recognized by Windows and Windows Update and there had already been a display driver update not so long ago, so I cannnot understand why I'm receiving an update for the wrong machine?
When i turn the computer on i get the screen : setup is starting service. Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart the installation. I have contacted acer they tried to help with the ALT and F12. Nothing I have tried works.. They told me to order the recovery discs for $20.00. I did , and they dont work either... I contacted them back, and now they say to send it back to them and for $199.00 plus shipping, they will repair the computer..I do not have the money for that..I have the the system disc, the 3 recovery disc and the language disc , that I just ordered from Acer for $20.00.
When I press down f10 and ALT at the same time during boot up from the factory recovery disk when seeing the splash screen, nothing happens and the 'acer laptap just boots from the regular hard drive as usual.
I have an intermittent problem with my Windows 7 programme installed on my laptop. Very occasionally when I boot it will fail to launch stating that certain files cannot be found. I didn't record exact message but it is a system 32 file error.
I am able to reboot as the start launch is there, although it resembles the old 98 start launch, and it starts up again without issue.
I know it is vague but has anyone else experienced this? It affects me say 1 out of every 25 boots.
