I have a acer aspire 7750G, windows 7 64-bit. It won't boot, it gives me this:
"Windows failed to start"
1. Insert your Windows installation disc.
2. Choose your language
3. Click "Repair your computer"
Status: 0xc000000f
I downloaded a recovery disk, it works, I can access cmd.
I went home last night and noticed that my laptop didn't startup when turning on. What can I do.
View 2 Replies View Relatedi just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies View RelatedLaptop wont start up it has a scratching sound on and off and it shows a message saying connection cable no bootable device ,how can I reboot without disk?
View 1 Replies View RelatedLast night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View RelatedSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
Acer desktop PC will not boot running on windows 7. This happenned about 2 days after I installed an antivirus program called Avast. However the computer already had installed the microsoft security essentials, the same problem happenned with my computer so I logged in safe mode and uninstalled the antivirus Avast. However when I try to get into safe mode in this desktop computer, the system gets frozen and the last line it shows its the disk.sys driver being loaded. Anything I can do?
View 5 Replies View RelatedOne of my machines has an error message flash by very quickly each time I boot it up. It goes by too fast to read the whole thing, but it starts with "Alert! Previous attempts at booting this system have failed at checkpoint..." The computer is a Dell XPS 8000 and runs Windows 7 64bit. I'm having no problems with the computer at all. The message goes away and Windows 7 continues to boot up just fine. I'm not sure when the message started because I usually hit the power button in the morning and walk away. Is this message indicative of a problem or can it be safely ignored if the computer has no other symptoms? I've searched and only found issues where computers won't boot or have other problems along with the message.
View 7 Replies View Relatedi had an issue with a PC after trying to change the memory on an Windows Vista PC..however the PC was not booting up so i put back the original RAM and when i booted i got the Blue screen of death error. after booting into safe mode and running diagnostics on the PC i rebooted again but still same error. i then when into the BIOS and rebooted in failsafe mode. this then caused the PC to not boot up at all, and the HDD light is not blinking
View 2 Replies View RelatedA few days ago, I started having trouble with Dell Latitued D800, Windows 7. First, Windows would not boot up. I was able to boot windows using the F12 option. When Windows loaded, the screen display had shrunk and was centered with a black perimeter. I contacted the guy that sold me the computer and he suggested that I check the boot sequence for the boot issue. That worked fine. To resolve the resolution issue, I was advised to select the "last known good configuration" from the F8 options. After I did that, the Windows Error Recovery Screen. A Recent Hardware Or Software Change May Be The Cause. I attempt to start windows normally.
View 7 Replies View RelatedWhen I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives
View 2 Replies View RelatedWhen I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives!Also says The boot selection failed because a required device is inaccessible.
View 1 Replies View RelatedI have had problems booting up my Toshiba laptop. (Windows 7 Ultimate 32 Bit) When i would start my computer, Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert you Windows installation disc and restart your computer.2. Choose your language settings, and then click "Next.3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc000000e Info: An error occured while attempting to read the boot configuration data. tried to solve the problem using repaire methods such as :At the DOS prompt type the following three commands:bootrec.exe /fixmbrbootrec.exe /fixboot (may return an 'Eliment not found' message)bootrec.exe /RebuildBcdI also deleted the BCD parition or it's related to it which is 100Mb in size ,
View 8 Replies View RelatedI left my 160 GB hard disc unused for 1 month.It was installed with Windows 7 ultimate.But now it says unable to start windows. I have another 1 TB hd. i can boot from this and my 160 GB still works as a memory storage. Its only problem is that it is unable to boot.I think if i install a new copy of window it will work.but i need to know why it was happened when 160 GB hard disc was not in used for a long time and any other way to recover it.
View 3 Replies View RelatedI'd had some problem with my laptop the last few days, what I believed to have happened is my laptop (Dell inspiron n5110) which is windows 7, was doing a configuration, but because of my bad connection, my internet dropped. It was stuck at 15% for 3 hours so I turned it off as it was about to run out of battery. It had some problems loading and starting up but they went after a day. but 1 day later I am booting up and I get a black screen.
View 9 Replies View RelatedI have a serious issue, this all started when i tried to update my bios and had some how screw up my os. I tried startup repair failed system restore failed and safe mode failed also. What should i do now?
View 1 Replies View RelatedA recent hardware or software change might be the cause to fix the problem: 1. Insert Windows installation disc and restart your computer, 2. Choose language settings/NEXT, 3. click repair your computer. If you do not have this disc, contact system admin or computer manufacturer. status OXCOOOOOOf the boot seletion failed "a required device is inaccessible
View 4 Replies View RelatedI went to use the rest room. I come back and he had spilled his juice inside my machine. I lost video and the fan on my brand new 7770 was stuck on max rpm. I turned everything off, took out the gpu, cleaned it, let it dry. Let the rest of the computer dry. I reinstalled the GPU and turned on my machine. The fan was no longer stuck on max RPM, so I felt I dodged a bullet. However, windows failed to start. It continually fails to start. I tried an older GPU (9500 GT). The fan on it would, for some reason, not spin, but I saw the model come up when I started the PC. Windows wont start. Initially I believed my problem was limited to a shorted GPU and I don't mind buying another new one, but since I was unable to get my old GPU to work I'm worried something else has shorted.
View 7 Replies View Relatedmy laptop won't start up-it reads, "Windows failed to strt. A recent hardware or software change might be the cause. I don'thave installation disc--if I did have it,m it's lost. I was terying to download a TV show from a website and i THINK I ruined my computer.
View 3 Replies View Relatedtoday my computer failed to boot up, I got a message stating that Windows 7 failed to start up. It was working perfectly fine the day before, I have no new installed software, applications, or hardware. So first I went through the "repair" process however it failed also and yielded no fix, I tried this activity several times to no avail. Then I began to test my hardware I removed one of my graphic cards and all but one stick of RAM and only connected one Hard drive. I went through the boot process with no motherboard errors, however I still got the same "failed to start up" warning. Running out of ideas and swapping hardware like a mad man, nothing seemed fix the problem.
After these failed attempts I decided to put the Windows 7 installation disk into the drive and see if I could run that and repair, or essentially put a fresh install onto my hard drive. Unfortunately for some reason when it prompts me to "hit any key to to boot from DVD" it doesn't record my keystroke and immediately brings me back to the original message of "failed to start up".So here I am running Ubuntu from a USB flash drive and all my hardware is reported accurately and is running like a top. Now, I can re-format the hard drive as NTFS through Ubuntu but I have a couple of questions: 1. my Original Windows 7 install has been on a 500 gb partition from a 1tb drive, I can format just the partition through Ubuntu but not sure if that will translate over when I attempt to reinstall windows.2. Why isn't my keyboard being able to press "any key" to boot into the windows install disc?
I'm very new to PCs, I just built this rig back in July and I've just run into my first "problem". I was sitting here reading the paper when my PC randomly shut down. When it started back up, it brought me to a black DOS screen that said:"Windows failed to start. A recent hardware or software change might be the cause.1. Insert your windows installation disc and restart your computer.2. Choose your language settings, and then click next.3. Click repair your computer.If you do not have this disk, contact your system administrator or computer manufacturer for assistance.Status: Status:0x000000e Info: The boot selection failed because a required device is inaccessible"So I did what it suggested and inserted my Windows 7 disc and ran repair. Repair couldn't do anything. It told me to contact my system administrator or hardware manufacturer.
So I opened my chasis and removed unplugged both of my HDs (OCz 120GB SDD and WD 2TB HDD) and plugged them back in. I booted up again and removed the Windows 7 disc. Now I had a black screen telling me something like "Define your boot disc in BIOS or insert media". That isn't verbatim, I should have wrote it down. Sorry. But I went into my BIOS and went to the Boot tab. I only saw two boot methods! OCz as no. 1 and Atapi as no. 2! Shouldn't Western Digital be there too (at least as a choice?) well I didn't see it.I switched Atapi to no. 1 and OCz to no. 2 (as if that would do anything) and that black screen about setting your boot method came up and I think I figured out it was looking for my Windows 7 disc. So I put it in and entered a key. The install menu came up, I clicked repair and this time it wasn't finding my Windows 7 installation at all! I started to panic because I thought both of my HDs had been wiped. I ran repair again. Did nothing. I went back into BIOS and put Ocz back as no. 1 and disabled no. 2 (Atapi) and amazingly, my computer started up.
I think that im facing the biggest pc prob of my life,Cz my windows has a major fail to start up , all safe modes and memory test do not work.I tried to repair it with the original cd of my windows, gess what, after loading windows files the screen goes black and nothing happens.all antivirus rescue bootable cds dont find a thing.
View 4 Replies View RelatedMy problem is that on occassions say every 2nd or 3rd start-up my laptop states that Windows failed to start-up properly, and gives me the option of repair or start windows normally So as the recovery states on screen is recommended this is usually the route i take but i have also run start as normal which gets me going. this is maybe not as serious as other posts I've read but it's becoming very frustrating, my laptop is a Lenovo G575 and i'm running windows 7 home premium.[code]
View 2 Replies View Relatedhave just started running a factory setting reboot got to 68% complete when we had a power cut, now when switched the lap top back on the screen says windows failed to start it says to install the windows disc and restart you comp put windows seven is installed in the laptop i when i brought the lap top it didnt have a disc the laptop is a emachine 627 running 64bit version the status 0xc000000f comes up.
View 2 Replies View RelatedI am trying to fix my grandaughters acer asprire one d 255 it will not boot up the selected entry could not be loaded because the application is corrupt when i try to restore to factory settngs only gets to 16 % and gives a error code sysyem restore failed i/o device error f10 brings me to edit boot option so itry to type bootrec/fixboot. if i could type the right thing on the edit boot option might work but not sure what to type . Since there is no disc drive to insert disc how do i do a system restore with no disc drive
View 2 Replies View RelatedMy mother recently threw the task of trying to fix her laptop. It absolutely refuses to boot Windows 7, which is her primary and only OS on the system. Here's what I've got so far:
1-HDD Boot returns: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert.... 2.... 3.... Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible."
So, I went into my BIOS setup, and switched my Boot Device Order to CD/DVD drive first. I try booting from my Windows 7 Disk, but before it reaches the "Press any key to boot from CD or DVD" I get this message: "SMART Failure Predicted on Hard Disk 0: HTS541....... WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent. Press F1 to Continue."
So I boot from the CD/DVD and Windows loads the files....sometimes it stalls at a black screen afterwards. If not, then it tells me to choose an OS to boot from, and the only option is "Windows Setup [EMS Enabled]". I hit F8 to try an Advanced Option. I tried booting into Safe Mode with Command Prompt. It loads the driver files but then just hung on "disk.sys" and I had to force shut-down.
I'm assuming it's a HDD failure, though I've also heard that the drive may be fine and it may be a Motherboard/CPU problem. I've also heard of a problem with a windows update causing a problem after reboot. I can't check anything because I can't get windows to boot even with a CD, which makes me believe it's more than a HDD problem.
My laptop is currently dual booting Ubuntu 11.04 and windows 7. Recently windows has been taking forever to boot up (at least 2 - 4 minutes), it runs perfectly fine when booted. I stuck in the CD to see if there was any start up errors but I cannot seem to access that due to the grub menu. Is there anyway to fix this issue?
View 4 Replies View RelatedI am on Windows 7 Pro Platform without Aero support.
When I boot my desktop I do not get the animated Windows Logo as the first screen and instead get a rolling bar like I did in XP.
get animated Windows Logo as the first screen while booting?