Windows 7 Failed To Start Application?
Oct 21, 2012
I am trying to fix my grandaughters acer asprire one d 255 it will not boot up the selected entry could not be loaded because the application is corrupt when i try to restore to factory settngs only gets to 16 % and gives a error code sysyem restore failed i/o device error f10 brings me to edit boot option so itry to type bootrec/fixboot. if i could type the right thing on the edit boot option might work but not sure what to type . Since there is no disc drive to insert disc how do i do a system restore with no disc drive
View 2 Replies
ADVERTISEMENT
May 3, 2012
I have already re-install the program but,still its not working
View 1 Replies
View Related
Mar 27, 2011
I am starting to get errors on my computer when I try opening any browser. on IE, it turns on for half a second and closes and shows this, It shows a "RunDLL" error, The application has failed to start because its side-by-side configuration is incorrect. Please see the aplpication event log or use the command-line sxstrace.exe tool for more detail.
Chrome is the same error but with the chrome location instead of inetcpl.cpl, same with firefox. What I did before this, everytime I turned on the computer, right after the splash screen when i first turn it on, it power goes off and restarts a few times and then it boots.
View 2 Replies
View Related
May 13, 2012
I have Windows 7 and I recently installed CCleaner and degragler and ran and re-ran then both. Since then I cannot get into Mozilla and I recently installed Trend Micro because my anti-virus was about to expire. The error message I get states:
C:\Program Files\Trend Micro\Titanium\UIFramework\uiWinMgr.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 6 Replies
View Related
May 21, 2011
This application failed to start because shell32.dll was not found..
View 6 Replies
View Related
Apr 28, 2010
i get this error when i start my 3ds max all was fine few days back dont knw what is problem now
View 7 Replies
View Related
Oct 30, 2012
I cant guess why my gta iv doesn't work.It showsthe following line,"the application has failed to startbecause its side-by-side configuration is incorrect.please see the application event log or use the command-line sxstrace.exe tool for more detail"I have i3 processor and 6 gb ramradeon graphics 1gb windows 7 32 bit
View 5 Replies
View Related
Aug 9, 2011
The error message: the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details.the event logs of the error:
theres 3 errors:
1/3:
Activation context generation failed for "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorNVMonitor.exe".Error in manifest or policy file "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorMicrosoft.VC80.MFC.MANIFEST" on line 4. Component identity found in manifest does not match the identity of the component requested. Reference is [code].....
i have an intel core i7 running 64 bit if that makes a difference.
View 9 Replies
View Related
Jul 27, 2011
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." First of all, I've gotten this on at least 3 different programs. Everyone who's written about this seems to think it's related to their specific program...it's not! Secondly, what I find here in the forum on the subject tells me there has been no solution...also am unable to find any on the 'net'. I think it acts like a virus and is spreading...What's up with this??? Does anyone know...? It has kept me from opening iTunes so I can't work with my iPad anymore. Certainly there must be someone knowledgeable enough to know what this is and what to do about it...right?:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz, x64 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce Go 7600 , 256 Mb
Hard Drives: C: Total - 95394 MB, Free - 35270 MB; D: Total - 95393 MB, Free - 30543 MB; F: Total - 93895 MB, Free - 65602 MB; G: Total - 11425 MB, Free - 11397 MB; M: Total - 11425 MB, Free - 308 MB;
Motherboard: Quanta, 30BD, 66.42, None
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 1 Replies
View Related
May 27, 2011
I get this message whenever i try to start ay program in the Microsoft office and with trillian. I have tried re installing office but have not had any success in getting the program to run. Is there anything i can do to get these programs running again? error.png 152.54K 9 downloads
View 4 Replies
View Related
Jan 6, 2012
The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
View 4 Replies
View Related
May 23, 2012
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
View 1 Replies
View Related
Aug 15, 2010
I tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll
themeui.dll
themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
View 2 Replies
View Related
Nov 25, 2011
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
View 1 Replies
View Related
Oct 26, 2011
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
View 2 Replies
View Related
Dec 28, 2011
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies
View Related
Aug 5, 2011
I'm using Windows 7 Ultimate. I've been using it for some time without problems, but this morning I was unable to get on the Internet. Yesterday I'd installed an update for ZoneAlarm which I thought was probably the problem, so I uninstalled in and downloaded and installed PC Tools Firewall Plus instead. no my computer will connect to the Internet OK, but whenever I try to open most programs, I get the following error:"The application was unable to start correctly (0xc0000142). Click OK to close the application."The only two exceptions I've found are Microsoft Security Essentials and Internet Explorer which both work fine.
View 4 Replies
View Related
Aug 10, 2012
I'm trying to run a .bat file but when i start it cmd won't start and it gives the error message"The application was unable to start correctly (oxc0000142). Click OK to close the application."
View 2 Replies
View Related
Jan 2, 2012
I've had my new MSI GE620 for only about a month and half and Ive been getting random crashes, not only but frequently, after trying to launch an application which then stops responding and can't be ended even by a taskkill /f command.
View 9 Replies
View Related
May 21, 2011
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies
View Related
Mar 7, 2012
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
View 1 Replies
View Related
May 8, 2012
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies
View Related
Oct 3, 2012
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
View 3 Replies
View Related
Apr 12, 2011
The problem that i am facing is that, my windows 7 search is instantaneous but when i click on the application the application takes time to load but if i run the same application from Desktop it will load immediately. This happens only one first time after bootup.
View 9 Replies
View Related
Jul 15, 2010
I am getting a error that says "Windows Backup application could not start due to an internal error: Server execution failed (0x800800005)". I found a couple articles saying my account didnt have the rights to do a backup. I dont know how this could be since I have a weekly scheduled backup and havent had a problem and I havent changed my rights. Plus Im logged on as a administrator. So the solution I found said this "Your Windows user account doesn't have the privileges it needs to run the task, Thomas. Go to Start, right-click Computer, then choose Manage, Local Users and Groups, Groups. Right-click Administrators and click 'Add to group', Add, Advanced, Find Now. Double-click Local Service and press Ok" Fix Backup & Restore when it won't start However Local users and Groups does not appear in my computer management. Im using Home Premium which is why I believe. Anyhow I dont plan to continue solely using windows backup either.
View 4 Replies
View Related
Aug 2, 2011
A few days ago, I started having trouble with Dell Latitued D800, Windows 7. First, Windows would not boot up. I was able to boot windows using the F12 option. When Windows loaded, the screen display had shrunk and was centered with a black perimeter. I contacted the guy that sold me the computer and he suggested that I check the boot sequence for the boot issue. That worked fine. To resolve the resolution issue, I was advised to select the "last known good configuration" from the F8 options. After I did that, the Windows Error Recovery Screen. A Recent Hardware Or Software Change May Be The Cause. I attempt to start windows normally.
View 7 Replies
View Related
Dec 15, 2011
When I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives
View 2 Replies
View Related
Jun 9, 2012
When I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives!Also says The boot selection failed because a required device is inaccessible.
View 1 Replies
View Related
Sep 14, 2012
I have had problems booting up my Toshiba laptop. (Windows 7 Ultimate 32 Bit) When i would start my computer, Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert you Windows installation disc and restart your computer.2. Choose your language settings, and then click "Next.3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc000000e Info: An error occured while attempting to read the boot configuration data. tried to solve the problem using repaire methods such as :At the DOS prompt type the following three commands:bootrec.exe /fixmbrbootrec.exe /fixboot (may return an 'Eliment not found' message)bootrec.exe /RebuildBcdI also deleted the BCD parition or it's related to it which is 100Mb in size ,
View 8 Replies
View Related
Sep 4, 2012
I left my 160 GB hard disc unused for 1 month.It was installed with Windows 7 ultimate.But now it says unable to start windows. I have another 1 TB hd. i can boot from this and my 160 GB still works as a memory storage. Its only problem is that it is unable to boot.I think if i install a new copy of window it will work.but i need to know why it was happened when 160 GB hard disc was not in used for a long time and any other way to recover it.
View 3 Replies
View Related
Nov 7, 2012
I'd had some problem with my laptop the last few days, what I believed to have happened is my laptop (Dell inspiron n5110) which is windows 7, was doing a configuration, but because of my bad connection, my internet dropped. It was stuck at 15% for 3 hours so I turned it off as it was about to run out of battery. It had some problems loading and starting up but they went after a day. but 1 day later I am booting up and I get a black screen.
View 9 Replies
View Related
