Gta Iv Doesnt Work / "the Application Has Failed To Start?

Oct 30, 2012

I cant guess why my gta iv doesn't work.It showsthe following line,"the application has failed to startbecause its side-by-side configuration is incorrect.please see the application event log or use the command-line sxstrace.exe tool for more detail"I have i3 processor and 6 gb ramradeon graphics 1gb windows 7 32 bit

View 5 Replies


ADVERTISEMENT

Currupt File And Start Up Doesnt Work

Sep 23, 2012

Well when I turn on my laptop, it just starts at Windows Error Recovery. Then it has two options which are 1. Launch Start up Repair (recommended) and 2. Start Windows Normally. But when I go to the second option it does not work and just goes to the first option and that itself doesn't work either.

View 1 Replies View Related

The Application Had Failed To Start?

May 3, 2012

I have already re-install the program but,still its not working

View 1 Replies View Related

Application Has Failed To Start

Mar 27, 2011

I am starting to get errors on my computer when I try opening any browser. on IE, it turns on for half a second and closes and shows this, It shows a "RunDLL" error, The application has failed to start because its side-by-side configuration is incorrect. Please see the aplpication event log or use the command-line sxstrace.exe tool for more detail.
Chrome is the same error but with the chrome location instead of inetcpl.cpl, same with firefox. What I did before this, everytime I turned on the computer, right after the splash screen when i first turn it on, it power goes off and restarts a few times and then it boots.

View 2 Replies View Related

Windows 7 Failed To Start Application?

Oct 21, 2012

I am trying to fix my grandaughters acer asprire one d 255 it will not boot up the selected entry could not be loaded because the application is corrupt when i try to restore to factory settngs only gets to 16 % and gives a error code sysyem restore failed i/o device error f10 brings me to edit boot option so itry to type bootrec/fixboot. if i could type the right thing on the edit boot option might work but not sure what to type . Since there is no disc drive to insert disc how do i do a system restore with no disc drive

View 2 Replies View Related

Application Has Failed To Start Because Configuration Incorrect

May 13, 2012

I have Windows 7 and I recently installed CCleaner and degragler and ran and re-ran then both. Since then I cannot get into Mozilla and I recently installed Trend Micro because my anti-virus was about to expire. The error message I get states:

C:\Program Files\Trend Micro\Titanium\UIFramework\uiWinMgr.exe

The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.

View 6 Replies View Related

This Application Failed To Start Because Shell32.dll Was Not Found

May 21, 2011

This application failed to start because shell32.dll was not found..

View 6 Replies View Related

Application Failed To Start Correctly 0xc0000142

Apr 28, 2010

i get this error when i start my 3ds max all was fine few days back dont knw what is problem now

View 7 Replies View Related

The Error Message: The Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect?

Aug 9, 2011

The error message: the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details.the event logs of the error:

theres 3 errors:
1/3:
Activation context generation failed for "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorNVMonitor.exe".Error in manifest or policy file "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorMicrosoft.VC80.MFC.MANIFEST" on line 4. Component identity found in manifest does not match the identity of the component requested. Reference is [code].....

i have an intel core i7 running 64 bit if that makes a difference.

View 9 Replies View Related

The Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect

Jul 27, 2011

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." First of all, I've gotten this on at least 3 different programs. Everyone who's written about this seems to think it's related to their specific program...it's not! Secondly, what I find here in the forum on the subject tells me there has been no solution...also am unable to find any on the 'net'. I think it acts like a virus and is spreading...What's up with this??? Does anyone know...? It has kept me from opening iTunes so I can't work with my iPad anymore. Certainly there must be someone knowledgeable enough to know what this is and what to do about it...right?:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz, x64 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce Go 7600 , 256 Mb
Hard Drives: C: Total - 95394 MB, Free - 35270 MB; D: Total - 95393 MB, Free - 30543 MB; F: Total - 93895 MB, Free - 65602 MB; G: Total - 11425 MB, Free - 11397 MB; M: Total - 11425 MB, Free - 308 MB;
Motherboard: Quanta, 30BD, 66.42, None
Antivirus: Microsoft Security Essentials, Updated and Enabled

View 1 Replies View Related

The Application Failed To Start Because Its Side-by-side Configuration Is Incorrect

May 27, 2011

I get this message whenever i try to start ay program in the Microsoft office and with trillian. I have tried re installing office but have not had any success in getting the program to run. Is there anything i can do to get these programs running again? error.png   152.54K  9 downloads

View 4 Replies View Related

The Application Failed To Initialize Properly (0xc0000142) Click On OK To Terminate The Application

Jan 6, 2012

The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.

View 4 Replies View Related

Cd Drive Doesnt Work

Nov 18, 2009

I installed windows 7 two weeks ago and everything worked well expect for the sound (5.1 doesnt work, still working on it). But yesterday when i wanted to watch a dvd my cd drive didnt work. i put it in but ni response but it in again and again no response. looked in "Computer" but it didnt show any cd drives. Only A: and c: (a: was a floppy drive which i dont have :s)

Do you know if this is a driver problem and how i need to fix this?

View 2 Replies View Related

Hotmail Doesnt Work?

Jun 6, 2012

[#2e00ff][/#2e00ff]Code :[cpp][cpp][email]ucazdoyle1958@hotmail.comndefined[/email][/cpp][/cpp]

View 1 Replies View Related

Restoring Using An Image Doesnt Work?

Dec 3, 2011

I have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD

View 9 Replies View Related

FEAR Doesnt Work On Windows 7?

Sep 17, 2011

I got the good old horror game FEAR and everytime i play it lags pretty bad like rank even on low and stuff it just has crappy FPS.or is it because FEAR is just to old and Win 7 is just too new!?

View 4 Replies View Related

Graphics Card Doesnt Work In Pc?

Jul 7, 2012

i have xfx nvidia geforce 9500 gt 1gb ddr2... 2 days ago it became totally dead, my pc does not start when it is put but pc works fine with on board VGA... and the gaming card also doesnt work in another pc with the same specification as mine... is there any way to repair..?

View 1 Replies View Related

The Application Was Unable To Start Correctly (0xc0000022). Click OK To Close The Application

May 23, 2012

The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.

View 1 Replies View Related

Dwm.exe - Application Error The Application Was Unable To Start Correctly (0xc000007b)

Aug 15, 2010

I tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:

uxtheme.dll
themeui.dll
themeservice.dll

I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?

View 2 Replies View Related

Application Was Unable To Start Correctly / Click OK To Close Application

Nov 25, 2011

I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.

View 1 Replies View Related

Xbox Wireless Receiver Doesnt Work?

Jan 17, 2013

I have a official xbox wireless receiver for windows and i cant get it to connect to the controller. I have installed all the drivers from the microsoft website and tried all the guides on the internet, but it still doesnt work.Anyone know any possible solutions? I have tried it on both my computer both running Windows 7 ultimat

View 2 Replies View Related

Suddenly Windows Installer Doesnt Work

Apr 20, 2011

I need urgent help because after my AVAST free 30-days trial ended,my machine has starting going backwards.I've downloaded MSE (microsoft security essentials) and tried to install it,but it comes up with:ERROR CODE=0x8004FF01 (which means Windows Installer cant be started/accesded) I've also tried with AVG but it comes up with= The WIS could not be accesed. This can occur if the WSI is not properly installed. But,people,problem is I GOT WIS UP AND RUNNING,I can see it the services tab.I suspect that is a Virus or a missing file.I also tried doing the following things to no avail

-System restore.
-SFC SCANNOW
-Chkdsk.
-Malwarebytes says there is nothing (malware).
-Full scan avast says there is nothing.
All said that the operation was successful but it stills comes up with the same error.

I fear using my GMAIL,HOTMAIL and PAYPAL accounts because I dont know if they will get "stolen" Know Im starting to think who was the one responsible for this...

View 9 Replies View Related

Word Doesnt Start, Its Disappeared?

Sep 27, 2012

Mom wants me to right a letter to grandmother but word doesn;t work. (Alert!) I can;t even find word or excell its like they disappeared. (Alert! Alert!) I need to make this work real fast or mom will punish me (Red Alert!)

View 6 Replies View Related

Homegroup Sharing Network Suddenly Doesnt Work

Nov 16, 2011

I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.

View 1 Replies View Related

Crypto Hybrid Pci Tv Tuner Doesnt Work On Windows 7?

Mar 2, 2012

Greetings, windows 7(64) are unable to find or myself drivers for my crypto hybrid pci tv tuner.i was wondering if there is a way to make the device to work under win7. Mobo is p5b-e.

View 1 Replies View Related

ATI Radeon 9600 Graphic Card Doesnt Work

Nov 6, 2009

the latest update driver is Vista, and it says I won't update it anymore, at least thats what I think, you can go look to the site and look for yourself. And so thats what I did, but since this is not Vista, it makes the wallpaper black and stays that way, but when i restart it, it screen gets messy, and I had to System Restore. My Question is, is there anyway to make the graphic card work on Windows 7, at least this one?

View 9 Replies View Related

Network And Sharing Center Doesnt't Work After Sleep Mode

Oct 30, 2011

I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.

It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.

View 2 Replies View Related

Canon Scanner Canoscan Lide 100 Doesnt Work In Windows 7?

Jan 22, 2012

the driver of the scaner can't work on windows 7

View 2 Replies View Related

Canon Scanner Canoscan Lide 100 Doesnt Work In Windows 7

Apr 10, 2012

please help me im trying to install my canoScan lide 100, then when im trying to use it " it says that the driver is not yet install but i already installed it? what is the best thing i can do?

View 1 Replies View Related

Cannot Start Virtual Application, The Application Is Blocked From Running As A Virtual Application

Oct 26, 2011

Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:

Cannot start virtual application. The application is blocked from running as a virtual application.

I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.

View 2 Replies View Related

Front Panel Audio Jack Doesnt Work After Sleep Mode Until Restart

Jun 3, 2012

I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.

Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.

I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.

It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.

Am I right in this is just failure of 7 to reinitialize some drivers?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved