Well when I turn on my laptop, it just starts at Windows Error Recovery. Then it has two options which are 1. Launch Start up Repair (recommended) and 2. Start Windows Normally. But when I go to the second option it does not work and just goes to the first option and that itself doesn't work either.
View 1 RepliesI cant guess why my gta iv doesn't work.It showsthe following line,"the application has failed to startbecause its side-by-side configuration is incorrect.please see the application event log or use the command-line sxstrace.exe tool for more detail"I have i3 processor and 6 gb ramradeon graphics 1gb windows 7 32 bit
View 5 Replies View RelatedI installed windows 7 two weeks ago and everything worked well expect for the sound (5.1 doesnt work, still working on it). But yesterday when i wanted to watch a dvd my cd drive didnt work. i put it in but ni response but it in again and again no response. looked in "Computer" but it didnt show any cd drives. Only A: and c: (a: was a floppy drive which i dont have :s)
Do you know if this is a driver problem and how i need to fix this?
[#2e00ff][/#2e00ff]Code :[cpp][cpp][email]ucazdoyle1958@hotmail.comndefined[/email][/cpp][/cpp]
View 1 Replies View RelatedI have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD
View 9 Replies View RelatedI got the good old horror game FEAR and everytime i play it lags pretty bad like rank even on low and stuff it just has crappy FPS.or is it because FEAR is just to old and Win 7 is just too new!?
View 4 Replies View Relatedi have xfx nvidia geforce 9500 gt 1gb ddr2... 2 days ago it became totally dead, my pc does not start when it is put but pc works fine with on board VGA... and the gaming card also doesnt work in another pc with the same specification as mine... is there any way to repair..?
View 1 Replies View RelatedI have a official xbox wireless receiver for windows and i cant get it to connect to the controller. I have installed all the drivers from the microsoft website and tried all the guides on the internet, but it still doesnt work.Anyone know any possible solutions? I have tried it on both my computer both running Windows 7 ultimat
View 2 Replies View RelatedI need urgent help because after my AVAST free 30-days trial ended,my machine has starting going backwards.I've downloaded MSE (microsoft security essentials) and tried to install it,but it comes up with:ERROR CODE=0x8004FF01 (which means Windows Installer cant be started/accesded) I've also tried with AVG but it comes up with= The WIS could not be accesed. This can occur if the WSI is not properly installed. But,people,problem is I GOT WIS UP AND RUNNING,I can see it the services tab.I suspect that is a Virus or a missing file.I also tried doing the following things to no avail
-System restore.
-SFC SCANNOW
-Chkdsk.
-Malwarebytes says there is nothing (malware).
-Full scan avast says there is nothing.
All said that the operation was successful but it stills comes up with the same error.
I fear using my GMAIL,HOTMAIL and PAYPAL accounts because I dont know if they will get "stolen" Know Im starting to think who was the one responsible for this...
Mom wants me to right a letter to grandmother but word doesn;t work. (Alert!) I can;t even find word or excell its like they disappeared. (Alert! Alert!) I need to make this work real fast or mom will punish me (Red Alert!)
View 6 Replies View RelatedI have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
View 1 Replies View RelatedGreetings, windows 7(64) are unable to find or myself drivers for my crypto hybrid pci tv tuner.i was wondering if there is a way to make the device to work under win7. Mobo is p5b-e.
View 1 Replies View Relatedthe latest update driver is Vista, and it says I won't update it anymore, at least thats what I think, you can go look to the site and look for yourself. And so thats what I did, but since this is not Vista, it makes the wallpaper black and stays that way, but when i restart it, it screen gets messy, and I had to System Restore. My Question is, is there anyway to make the graphic card work on Windows 7, at least this one?
View 9 Replies View RelatedI have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
the driver of the scaner can't work on windows 7
View 2 Replies View Relatedplease help me im trying to install my canoScan lide 100, then when im trying to use it " it says that the driver is not yet install but i already installed it? what is the best thing i can do?
View 1 Replies View RelatedI have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
my laptop TOSHIBA Windows7 start menu stop working.
View 2 Replies View RelatedWindows 7 Ultimate, upgrade install from Vista. Toshiba Satellite laptop. I searched for this both in Google and on this forum, can't find anything. I can type into the search/run box in the start menu, but nothing happens when I do. No search items come up; if I type in a program name, I can't make it run by hitting enter. If I open a command prompt I can run anything I want from there. This happened several weeks after the upgrade, it was working fine. I had to clean several virus infections, so my thinking is that something got removed from the registry that shouldn't have. Anyone have any ideas? Thanks in advance, forums like this have been a lifesaver for me more than once. I rarely have to post, I can usually find my problem, but this one seems to be a bit odd. Just remembered the other odd thing that happened, seemingly along with the above: my "printers and devices" window is empty. The devices are there, and work, but they're not listed in the window. As far as I know, this happened around the same time the other issue did. I did find some mention of this problem on the net, but none of the fixes worked for me. Don't know if it's relevant or not, but better too much info than not enough.
View 3 Replies View Relatedmy shut down and start up sounds are not working!!! when I shut down my computer and start up my computer, it starts up and shuts down silently!!! the sounds set for shut down and start up DO NOT work!!!!!!!!! when I go into Control Panel or into Personalization and into the system sound and click "test" it tests just fine!!!!but they DO NOT play when I start up my computer or shut down my computer!!!!!!!same goes with ANY sounds I choose for start up and shut down!!!! they won't work at all!!!!!!!! they test just fine in the personalization window and in control panel
View 3 Replies View RelatedI have many years of experience with Windows OSes, but one thing about Win7 is stumping me. I have an application that I want to open when I log in. It's Speedfan, so I can monitor temperatures. I put a shortcut to it in my Start Menu - Programs - Startup folder. If I click on that shortcut it starts the app. But the app never starts when I log in. It shows in the start menu in MSCONFIG and it is enabled.
View 4 Replies View Relatedmy LENOVO 450 the window start up do not want to run, when i open it, there the note saying if I want to open my computer in normal way or use to window start up repair
View 4 Replies View RelatedI ran norton power eraser (had a virus) and it id'd a number of bad things so I said fix it and now windows wont start up. comp says to run startup repair but that doesnt work and I dont know what to do from here
View 3 Replies View RelatedThis is really strange.. i have noticed for a few days that the search in the star menu isn't working... i shrugged this off the last few times because i didn't really need it(just being lazy trying to find a program)... but today... i typed run... and instead of finding run like normal it shows a few options "programs", "control panel", "documents", and "files" now these all have blank icons and when i click on programs(the obvious selection) i get a pop up from windows security that says"These files can't be openedYour Internet Security settings prevented one or more files from being opened."and in "show details"... "Programs"
View 10 Replies View RelatedI restart my PC spam F8 and enable test mode. Windows boots up and then... nothing. it's normal windows starting without the watermark in either corner and I can't install drivers without certification.
View 9 Replies View RelatedI just realised that H & S, which was sketchy but at least worked in all pre-betas is now not working at all. I get the attached result no matter what I type in. Comments?
View 9 Replies View RelatedI've had Win7 64-bit Home Premium on this laptop for almost 3 years. I've had a second computer with Win7 32-bit Home Premium in the house networked for two years. Now I add a third, and I can't get file sharing to work. I can SEE files on that third computer from mine, but it won't let me move files to that computer from mine, and it won't let me save them! It says I don't have permission. My userID on this computer is "Katie" and that computer also has a user account called "Katie." The folders in question DO have sharing set (by right clicking on them) so that "Katie" has read/write permission. Why don't have have write permission, then?
View 7 Replies View RelatedI have Microsoft Power point and in the association list, power point is designated as the software to be used for .pps files. When I get a power point downloaded attachment to my email client (.pps) and I click on it, I get the message that "it could not be opened because the helper location could not be found". I'd like to get this to work. I do know that I can save the attachment, open power point and view it but merely clikcking on it should work
View 9 Replies View RelatedWindows won't start. I get a a black screen saying some hardware or software has changed and the only options are to press enter to continue, or escape to exit. I tried booting my Win 7 64 bit recovery disc (aka system repair disc) but in the second screen where it tells you to select an operating system, it is blank! I attempted to add hard disk drivers but i couldn't figure out how. So i pressed next and got to the screen with various options. I selected "Startup Repair" but that won't work. It says that "startup repair cannot repair this computer automatically".
View 5 Replies View Relatedi'm running windows 7 prem home....computer was working fine a couple of day ago, suddenly it would get stuck on the welcome screen for awhile, then eventually goes to the home screen. nothing works on home screen, start, no desktop icons, nothing but a blue circle spinning.....can't get to task manager. works great in safe mode and my daughter's side work fine, it's my side and the guest account not working properly....did not install anything new, but i did uninstall avg anti virus....so when you try to log on the home screen gets this error message "C:windowssystem32cmd.exe"...[URL]
View 1 Replies View RelatedI cannot open Help files that require the Windows Help (WinHlp64.exe) program.
View 1 Replies View Related