I installed windows 7 two weeks ago and everything worked well expect for the sound (5.1 doesnt work, still working on it). But yesterday when i wanted to watch a dvd my cd drive didnt work. i put it in but ni response but it in again and again no response. looked in "Computer" but it didnt show any cd drives. Only A: and c: (a: was a floppy drive which i dont have :s)
Do you know if this is a driver problem and how i need to fix this?
[#2e00ff][/#2e00ff]Code :[cpp][cpp][email]ucazdoyle1958@hotmail.comndefined[/email][/cpp][/cpp]
View 1 Replies View RelatedI have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD
View 9 Replies View RelatedI got the good old horror game FEAR and everytime i play it lags pretty bad like rank even on low and stuff it just has crappy FPS.or is it because FEAR is just to old and Win 7 is just too new!?
View 4 Replies View Relatedi have xfx nvidia geforce 9500 gt 1gb ddr2... 2 days ago it became totally dead, my pc does not start when it is put but pc works fine with on board VGA... and the gaming card also doesnt work in another pc with the same specification as mine... is there any way to repair..?
View 1 Replies View RelatedWell when I turn on my laptop, it just starts at Windows Error Recovery. Then it has two options which are 1. Launch Start up Repair (recommended) and 2. Start Windows Normally. But when I go to the second option it does not work and just goes to the first option and that itself doesn't work either.
View 1 Replies View RelatedI have a official xbox wireless receiver for windows and i cant get it to connect to the controller. I have installed all the drivers from the microsoft website and tried all the guides on the internet, but it still doesnt work.Anyone know any possible solutions? I have tried it on both my computer both running Windows 7 ultimat
View 2 Replies View RelatedI need urgent help because after my AVAST free 30-days trial ended,my machine has starting going backwards.I've downloaded MSE (microsoft security essentials) and tried to install it,but it comes up with:ERROR CODE=0x8004FF01 (which means Windows Installer cant be started/accesded) I've also tried with AVG but it comes up with= The WIS could not be accesed. This can occur if the WSI is not properly installed. But,people,problem is I GOT WIS UP AND RUNNING,I can see it the services tab.I suspect that is a Virus or a missing file.I also tried doing the following things to no avail
-System restore.
-SFC SCANNOW
-Chkdsk.
-Malwarebytes says there is nothing (malware).
-Full scan avast says there is nothing.
All said that the operation was successful but it stills comes up with the same error.
I fear using my GMAIL,HOTMAIL and PAYPAL accounts because I dont know if they will get "stolen" Know Im starting to think who was the one responsible for this...
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
View 1 Replies View RelatedGreetings, windows 7(64) are unable to find or myself drivers for my crypto hybrid pci tv tuner.i was wondering if there is a way to make the device to work under win7. Mobo is p5b-e.
View 1 Replies View RelatedI cant guess why my gta iv doesn't work.It showsthe following line,"the application has failed to startbecause its side-by-side configuration is incorrect.please see the application event log or use the command-line sxstrace.exe tool for more detail"I have i3 processor and 6 gb ramradeon graphics 1gb windows 7 32 bit
View 5 Replies View Relatedthe latest update driver is Vista, and it says I won't update it anymore, at least thats what I think, you can go look to the site and look for yourself. And so thats what I did, but since this is not Vista, it makes the wallpaper black and stays that way, but when i restart it, it screen gets messy, and I had to System Restore. My Question is, is there anyway to make the graphic card work on Windows 7, at least this one?
View 9 Replies View RelatedI have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
the driver of the scaner can't work on windows 7
View 2 Replies View Relatedplease help me im trying to install my canoScan lide 100, then when im trying to use it " it says that the driver is not yet install but i already installed it? what is the best thing i can do?
View 1 Replies View RelatedI have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
I have Dell computer with HL-DT-ST DVD+-RW GSA-H73N SCSI CdRom Device...never had a problem with it now all of a sudden it wont recognize a blank disc...it will play a dvd movie with no problem...I uninstalled and then reinstalled the drivers which did nothing...also uninstalled the drive completely which didnt help either
View 3 Replies View RelatedWindows 7 doesnt have Screensaver on by default? It has the nice dimming feature but then doesnt set the screensaver on by default!!
View 9 Replies View RelatedFor 3 days now my laptop doesnt want to turn off, i've just been putting it to sleep.
View 3 Replies View RelatedI recently purchased a new system (about 2 weeks ago) but I've noticed my 64bit software is only able to use 10 of 12GB installed.When I look at the system properties I see windows recognizes 12GB RAM installed but sais only 10GB of it is available.Any thoughts? I paid lots of money for my RAM so I'm not really considering this a luxery problem (When I startup it sais the memory frequency is 1066. Not sure if this is useful)I'm not really thinking a faulty stick because windows recognizes al sticks.
View 28 Replies View Relatedmy graphics card is Mobility radeon HD5145 ..whenever i update my driver only the catalyst control center updates .. but the core driver is stuck at 10.8.
View 4 Replies View RelatedYesterday I got a blue screen later then my n5010 laptop uses to stuck at "windows is starting" screen.So I decided to format and install windows 7.When I put Windows 7 Dvd and got to format screen.I coudnt see sata hdd ( it does exist in bios ) . I tried to install sata drivers but it didnt work from external I think.So I called dell sevice . THey said do the diagnostics test Now I am doing the tests.It passed the confidence , the long test and the read test.It is at seeking test now.I cant call dell service because its closed by this hours
View 3 Replies View RelatedTo prevent the new default route from being created, select Internet Protocol (TCP/IP) on the Networking tab for the properties of the VPN connection. Click Properties, and then click Advanced. In Advanced TCP/IP Settings, on the General tab, clear the Use default gateway on remote network check box. I have internet access but I dont think its through the VPN. I am connected but it says on the VPN stats: Without internet access. Because when I try to go through some blocked ports in my school it still doesnt work but It works with YourFreedom(with openvpn mode).
View 1 Replies View Relatedhow to solve this error for playing point blank..Graphic Device does not support PixelShader: Standard VGA Graphics Adapter
View 1 Replies View RelatedMom wants me to right a letter to grandmother but word doesn;t work. (Alert!) I can;t even find word or excell its like they disappeared. (Alert! Alert!) I need to make this work real fast or mom will punish me (Red Alert!)
View 6 Replies View RelatedI updated my pc's internal gpu which has G31 express chipset so i updated it to the latest one and i saw that it supported win 7/vista 64bit but now that i have restarted pc it comes to the dell inspiron load screen after loading it goes blank with a cursor at the top left part of the screen so i am kind of stuck since idk wat to do
View 1 Replies View RelatedAfter searching the entirety of the internet I have come here to try to resolve my problem. I have a Seagate barracuda 1.5tb 3.5" 7200rpm hard drive which i was previously using to run windows server 2008. I am now trying to use it as an external hard drive for my laptop, however the laptop does not seem to recognize it. I tried using two different cases, three different usb ports, and i confirmed that everything was properly plugged in and powered on. The hard drive does not appear in disk manager, my computer, or the BIOS.
View 3 Replies View RelatedI installed a new driver for u-lead but it doesn't show in device manager as unknown or usb. Windows 7 shows that it is compatible. The program won't work.
View 1 Replies View RelatediPod won't autoplay on windows 7. I've set my iPod to manually choose the music and video files, which automatically checks the "enable disk usage" box. However I am unable to AutoPlay it in windows explorer. When I right-click on my iPod and select AutoPlay nothing seems to happen.
View 3 Replies View RelatedMy motherboard is ASUS P6X58D Premium, Intel i7 920 2.67Htz, Windows 7 Pro 64bit, Hard drives: C: WD Caviar RE2WD500YS, WD1002FAEX 64mb cache, 3rd drive is 1TBWD1002FAEX 32mb cache, and 4th drive is: 1TB WD1001FALS-00J7B0 32mb cache.When I click on My Comuter in Windows 7, it does not see hard drives #3, and #4 but it does see the C: drive that is a 500GB WD drive and the first 1TB WD hard drive.Drives #3 and #4 are not seen by Windows. Western Digital Data LifeGuard Diagnostics(DLGDIAG) sees all four drives but the SMART status of drives #3 & #4 say: Not Available. I can run a Quick Test on drives #3 & #4 and they pass the Quick Test but it won't run the other WD tests for drives #3 & #4
View 2 Replies View RelatedIt was bad in XP, but seems worse in Windows 7.Clipboard doesnt seem to hold onto last Copied item long at all. I will copy a string of text and if I I dont paste it very soon after it wont paste.Usually I hcopy a piece of text, and if I have to minimize a few windows or do too many keystroke before pasting it gets lost and I have to go back and re-copy it.Its just beuggier than expected for such a nice OS.
View 2 Replies View Related