While housecleaning I unplugged everything from my computer, dusted, and plugged everything back in, though I probably didn't put all the USB devices in the same order as before. Now my HDMI interface doesn't work, and the mouse and keyboard only work in safe mode. When I boot into normal mode, there's no cursor and no response to keyboard. What could have gone wrong?
View 1 RepliesBasically i installed some updates for nvidia to help my devices catch up with my win 7 pro install. Now however i have the issue that my ps/2 keyboard and touch pad mouse has stopped working and i'm having to use USB to actually use my laptop. Has anyone else found a solution to this at all. I have checked device manager and it say code 10 for the mouse not working and code 19 for the keyboard not working.
For background info i have a Dell Studio XPS running 64 bit Win 7 pro.
I'm not blindly posting the issue. I have done research and followed other threads in order to troubleshoot the problem but to no avail.I built my computer back in January of this year. Not up until a few days ago did I start having this issue. I can't think of any major changes I made in order to cause this. I can use my Logitech Mouse and Keyboard the wake the computer up from the sleep mode... but once it's up, neither of them are responding.Things I checked for: Latest update on the USB drivers, Logitech Software update (including the PS/2 Driver) Windows update. I checked if the option is checked ON for 'Allow this device to wake up the computer' (and it is on). When other things are plugged in the same USB port, they work just fine after sleep mode, e.g. my drawin
View 1 Replies View RelatedIn SAFE MODE, keyboard and mouse (all PS/2) not working.How to manually assign IRQ for COM1 in Safe Mode?How to remove COM1 from Windows completely?
View 2 Replies View RelatedI have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
View 3 Replies View Relatedwindow 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies View Relatedin normal mode vga not working
View 1 Replies View Relatedi have problem with my laptop. it always restart when i on it in the normal windows. but if i on in safe mode, the restart will not happen...
if i on it in normal windows, it can be stand only 2 or 3 minutes. one thing that i notice that in my problem is when i turn on my laptop in normal windows and i not use it like i open my browser or open folder, it will not be restart and we will look it like no problem.
but if i start use it like open browser or open folder, my laptop will restart. for your information, my laptop has a little heat but not very strong.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Celeron(R) M CPU 410 @ 1.46GHz, x86 Family 6 Model 14 Stepping 8
[Code].....
I am trying to get my PC to be woken from sleep by the keyboard. My keyboard and mouse are both USB devices so I have gone into my bios to enable USB devices to wake PC from sleep.Now though my PC wont go into sleep mode all it does is breifly enter sleep mode then straight away comes back out of it, is there any thing that can be done to get around this problem.
View 5 Replies View RelatedLast night my HP laptop was working just fine with zero issues. Today I turned it on and my keyboard didn't work and also saying that no battery was detected.Now if I turn it on with a power cord attached I can remove the power cord and the laptop stays turned on, I can also shut the lid and the laptop will stay powered on. However if I use the shut down function or turn it off by the power switch it will not power back up without the power cord attached.The keyboard just refuses to work none of the keys work. No fn key no alt key no ctrl key nothing. I can't turn wireless on or off using the F key, however the on-screen keyboard works fine, and so does a keyboard that is plugged in through usb.I have checked the drivers which says it is working properly, I tried uninstalling it and reinstalling, which didn't fix it.I Googled this problem and read that a bios update might fix this, I updated it and nothing as well as doing the usual virus and malware scans with the likes of malwarebytes and MSE.
View 2 Replies View RelatedWhy would my mouse just stop working. Checked the batteries and they're good. Loaded W7 on 3 days ago and today the mouse won't work. Running W7 64 bit. It's a Kensington mouse as well. Was using it with vista 64 bit with no problems for a year.
View 2 Replies View Related2 days ago my mouse randomly ceased to work (Razer Imperator). Before preparing an RMA I thought to test it on another system (netbook) to verify it was broke. Turns out it wasn't.So past 2 days I have been googling my ass off using my drawing tablet as a mouse. I have other USB mice but they all don't work either, other than the tablet. Unfortunately system restore is not an option as for some bizarre reason its not turned on. Using the repair CD, the one from the backup part of the control panel doesn't work as it detects no problems. One thing I did learn from that boot repair CD is that my mouse functions fine at this point. From this im assuming a software fault. First time I saw that I had hope it was fixed. Not to be the case.So I can give yall a brief overview of the things I have done so far:
Checked that the mouse is working on other systems Turned off Legacy support for USB on my BIOS Uninstalled and re installed the product drivers countless times (These were removed properly each time) Tried all the USB ports on my computer and verified that all my ports work with other devices eg flash drives and the like Uninstalled the drivers from the devices in the device manager to see if windows could re install them automatically Transferred several .INF and .PNF from another functional system related to the problem ( also have the originals backed up) Removed all other USB devices to see if its a power fault Updated my bios and chipset drivers alongside most other system drivers So thats where I am at so far. I also have a few observations which may also be relevant Under the devices and printers and into the properties i get the following [URL] From that I think its related to a missing PnP HID-compliant Mouse driver or atleast there is a conflict but thats my speculation
System Specs:
Intel i7 975 3.33Ghz
6144MB DDR ram
Geforce GTX 560
Mobo P6X58D-E
PSU 1100 Tagan
I have a problem with Windows 7. The keyboard stopped working form when I install VMware and uninstall it. In the BIOS it works fine. When I use a Linux partition (starting from DVD, "Knoppix") it works also fine. Also at bootloader leval its ok.But at Windows 7 it stopps working. Does not matter which keyboard I use -USB or PS/2.
View 1 Replies View Relatedi have read about similar problems on here but none of the solutions worked for me. the keyboard seems to work just fine until the "starting windows" screen appears then absolutely nothing. i've tried reinstalling the alps pointing device drivers, i uninstalled then installed the newer version, nothing seems to work. the computer was working just fine until i came home from work and turned it on. this same problem happend about 2 months ago and it magically fixed it self, i just never turned the computer off again. i have 2 identical sony vaio VPC-EB33FM/BJ models, and have compared all the drivers and settings, they are the exact same (except the newer version of Alps on the broken one). i ran one of those "scan for new drivers" programs that ask for money to update drivers that it says are old and it said that the HID keyboard device driver is way out of date along with several others, but once again they are the same as the ones on the computer i am using now and this one works like a champ
View 3 Replies View RelatedI've come across an interesting problem recently which I have tried to solve to no avail. I installed Windows 8 Developer Preview on a separate hard drive to my base Windows 7 install, and had an issue that arose where the OS suddenly decided that the drivers the keyboard was using were invalid. This is not the (current) problem, however it is important to mention. Now, to fix the Win 8 driver problem I went to the device manager, uninstalled the drivers, and then unplugged/plugged the keyboard back in. Since that rather bodged fix, the keyboard suddenly stopped working in Windows 7. It shows up in device manager as working, and I can set macros in the associated Razer software, although it does not perform its most basic function of typing. I have tried a similar tactic to that which I employed while fixing the problem with Windows 8, although my attempts have been fruitless. The keyboard in question is a Razer Lycosa, and the OS is Windows 7 Ultimate, 64 bit.
View 4 Replies View Relatedi have a Toshiba laptop (wich is not very old) and the mouse stopped working, so far i have rolled back the driver, than i updated it again?
View 3 Replies View Relatedhi my mouse right click has stopped working tried another mouse but same issue
View 3 Replies View RelatedI have had windows 7 x64 for a while and suddenly, my USB mouse (OCZ Behemoth) stopped working. oddly, only the pointer stopped working, the clicker and scroll wheel work fine. It's a corded mouse, so no "new battery" comments.
WHAT I HAVE TRIED
Different port Device manager->Reinstall (it appeared as "Unknown USB device". it now appears as "USB Human Interface Device" but still does not work.) Rolled back using System Restore to yesterday when it worked, nothing. Rebooting Going into my WinXP x64 install, it works there putting the Behemoth in my laptop, it works. Using another USB mouse on my computer (doesn't work with 3 mice that work fine on other computers) Trying other USB devices in my ports (all ports work fine with a thumb drive, as well as USB devices that require power) POSSIBLE CAUSES
I recently set up a "guest" account on my computer. this is the only major change i can think of (this was removed when i used System Restore) IT IS NOT
Motherboard Drivers (USB works fine with other devices) OCZ drivers (no mouse works correctly) Mouse Battery (corded mouse) Bad install (it worked fine for the approximate month i had Windows 7 on my computer) Proprietary driver clash (self-built rig, not HP/Compaq/whatever) NOTES
I have not tried a PS/2 mouse or USB->PS/2 adapter because i do not own one. The "new hardware wizard" does not pop up upon a mouse insertion I am admin account.
My mouse has stopped working after i did some window's updates!, it's only a �4 mouse from asda in the UK, but was working fine before i did them. I went into my task manager and 2 of the USB's have warning's on them? Also this is the latest update that's killed my mouse.
My keyboard on my laptop is not working, as well as the mouse. I pluged in a usb keyboard and a usb mouse so that i may use my laptop. how can i fix this. i ran a system report and this is the outcome.Error Symptom: Device is not present, not working properly, or does not have all of its drivers installed. Cause: A device has a configuration problem that prevents it from working properly.Details: The device, PenMount Keyboard Device Filter Driver, is reporting "tv_ConfigMgrErr24"This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPIPNP03034-75450AE-0Resolution: 1. Verify the correct driver is installed. 2. Try updating the drivers using Windows Update. 3. Check with the manufacturer for an updated driver. 4. Attempt to uninstall and then reinstall the device using Device Manager. Related: Explanation of Error Codes Generated by Device Manager Manage Devices in Windows
View 10 Replies View RelatedYesterday I got on my computer everything is running fine. Today got on it for awhile and suddenly the USB keyboard and USB mouse lock up. I've tried restarting it and I can't get past the first screen. It says keyboard not present or something around those lines.I plugged in a ps/2 keyboard and it works but my USB mouse will still not work. I've tried going into BIOS and making sure USB was enabled. Tried a system restore but for some reason it wont complete.
View 1 Replies View RelatedI have a Dell Zino HD. After some Windows updates (may or may not be relevant) the mouse and keyboard have stopped working completely. They work for the BIOS and for F8 options but once Windows has started to boot properly, they stop. I therefore cannot log on.
View 1 Replies View RelatedI have a very strange problem. My mouse clicks by itself, and my keyboard types things I've previously typed EVEN THOUGH it's not plugged in. It's random, but occurs after about 2 hours of use. Could I have gotten a virus or changed some weird setting?
View 13 Replies View Relatedmy keyboard will not work,have ended up using the on screen keyboard and takes forever to type.any ideas what i can do to repair it
View 2 Replies View RelatedMy Gateway 64bit Windows 7 keyboard stopped working....3 USB ports are not recognized. Everything worked perfect but for some reason on updating my computer the keyboard flashes on bootup then no response..
View 1 Replies View RelatedBeen working fine all year. Most recently I had it in my netbook. I got a pop up that said the UDB device was not recognized. I tried to reinstall the microsoftintellipoint mouse software again but that didn't fix it.I then tried it in my other laptop which it has working in the past, and when i plugged in the receiver it the computer said it was an unrecognizable device.
View 2 Replies View RelatedI have a dell latitude with windows 7. After a year of usage the mouse clicks suddenly stopped working. Left clicks stopped working all together, right click sometimes work, but most of time it does other things. I suspect it's some malware. I run avg, spybot and malwarebytes, which found nothing. Checked the mouse settings in control panel, and didn't fine anything strange.
View 2 Replies View Relatedreally have never seen anything quite like this. When I boot up my PC and it gets to the desktop, a program window pops up and the mouse and keyboard will not work.Therefore, I cannot clear the program from the desktop or go anywhere to run scans or the like to see if the problem is virus related. When I go into safe mode, it does the same thing. I tried restoring to last known configuration with no System Restore shows no restore points. I can't do anything including get you information on my PC. I am running Windows 7 32 bit on a HP/Compaq DC 7600 C/PD 950. I am running Avast Anti-Virus Suite Pro. Regardless once on the desktop, I can not go anywhere. What the heck? Right now I am working on my laptop.
View 6 Replies View Relatedinstalled the R/C last night. When it finally was done installing doing an upgrade from 32-bit vista to windows 7, the final reset loads up and i cannot use either my mouse or keyboard. I have tried pluggng them into every usb slot i have, restarted with both plugged in and not plugged in.tried the 2 other mice and another keyboad. One being a microsoft keyboard that. The keyboard does work when choosing between the different loadup options, but still doesn't work in safemode.When i try to reinstall either Vista with my bootup cd or with the copy of windows xp i have, it starts the loadup , but keeps getting the blue screen before the install even starts.
View 9 Replies View RelatedThe mouse and keyboard work in the Bios, but once it gets to the log in screen there is a pointer in the middle but nothing works.I had just installed the software for the keyboard from the Kensington website and it told me to re-boot. So that is what I did, now nothing works. After I noticed it had froze, I had to hold the power button on the tower to shut it down. I tried doing safe mode, but that made no difference. Legacy is activated in the bios and it sees the UBS mouse and keyboard. Here are the specs for the PC:(Keyboard) Kensington Pro Fit Wired Media Keyboard K72407US USB Wired (Mouse) Pixxo MO-I133UR Red 3 Buttons 1 x Wheel USB Wired Optical 80
(OS) Windows 7 Home Premium x64
(CPU) AMD FX-6100
(Motherboard) BIOSTAR TA970XE
(Memory) G.SKILL Ripjaws X Series 16GB (2 x 8GB)
(Graphics Card) GIGABYTE GV-R777D5-1GD Radeon HD 7770 GHz
[code]....
I tried doing a system restore, but for some reason my backup disk is not being seen (even though the reader is) and since I got the OEM version of Windows 7 I don't think I can just re-install it.
I have a Dell Inspiron 560s which is about 2 years old. The keyboard and mouse were working till 12 hours ago. This morning i realized that neither of them were working. The laser in the mouse and the lights on the keyboard stays on until the login process starts. The keyboard works in the BIOS. Once the screen says 'Starting Windows', the lights and the laser go off resulting in the mouse and the keyboard not working. I thought going into safe mode and trying would make a difference - my efforts went in vain. The only way I could turn off the computer during this process of trying was by turning of the ups or holding down the power button for about 5 seconds. I have currently stopped any further trials as I am afraid that switching off the computer like that would spoil the hard disk and I will lose all my data which is on it (I have lots of Pics and docs which are very important).
View 3 Replies View Related