I have a problem with Windows 7. The keyboard stopped working form when I install VMware and uninstall it. In the BIOS it works fine. When I use a Linux partition (starting from DVD, "Knoppix") it works also fine. Also at bootloader leval its ok.But at Windows 7 it stopps working. Does not matter which keyboard I use -USB or PS/2.
View 1 RepliesI've come across an interesting problem recently which I have tried to solve to no avail. I installed Windows 8 Developer Preview on a separate hard drive to my base Windows 7 install, and had an issue that arose where the OS suddenly decided that the drivers the keyboard was using were invalid. This is not the (current) problem, however it is important to mention. Now, to fix the Win 8 driver problem I went to the device manager, uninstalled the drivers, and then unplugged/plugged the keyboard back in. Since that rather bodged fix, the keyboard suddenly stopped working in Windows 7. It shows up in device manager as working, and I can set macros in the associated Razer software, although it does not perform its most basic function of typing. I have tried a similar tactic to that which I employed while fixing the problem with Windows 8, although my attempts have been fruitless. The keyboard in question is a Razer Lycosa, and the OS is Windows 7 Ultimate, 64 bit.
View 4 Replies View RelatedMy Gateway 64bit Windows 7 keyboard stopped working....3 USB ports are not recognized. Everything worked perfect but for some reason on updating my computer the keyboard flashes on bootup then no response..
View 1 Replies View RelatedLast night my HP laptop was working just fine with zero issues. Today I turned it on and my keyboard didn't work and also saying that no battery was detected.Now if I turn it on with a power cord attached I can remove the power cord and the laptop stays turned on, I can also shut the lid and the laptop will stay powered on. However if I use the shut down function or turn it off by the power switch it will not power back up without the power cord attached.The keyboard just refuses to work none of the keys work. No fn key no alt key no ctrl key nothing. I can't turn wireless on or off using the F key, however the on-screen keyboard works fine, and so does a keyboard that is plugged in through usb.I have checked the drivers which says it is working properly, I tried uninstalling it and reinstalling, which didn't fix it.I Googled this problem and read that a bios update might fix this, I updated it and nothing as well as doing the usual virus and malware scans with the likes of malwarebytes and MSE.
View 2 Replies View RelatedBasically i installed some updates for nvidia to help my devices catch up with my win 7 pro install. Now however i have the issue that my ps/2 keyboard and touch pad mouse has stopped working and i'm having to use USB to actually use my laptop. Has anyone else found a solution to this at all. I have checked device manager and it say code 10 for the mouse not working and code 19 for the keyboard not working.
For background info i have a Dell Studio XPS running 64 bit Win 7 pro.
i have read about similar problems on here but none of the solutions worked for me. the keyboard seems to work just fine until the "starting windows" screen appears then absolutely nothing. i've tried reinstalling the alps pointing device drivers, i uninstalled then installed the newer version, nothing seems to work. the computer was working just fine until i came home from work and turned it on. this same problem happend about 2 months ago and it magically fixed it self, i just never turned the computer off again. i have 2 identical sony vaio VPC-EB33FM/BJ models, and have compared all the drivers and settings, they are the exact same (except the newer version of Alps on the broken one). i ran one of those "scan for new drivers" programs that ask for money to update drivers that it says are old and it said that the HID keyboard device driver is way out of date along with several others, but once again they are the same as the ones on the computer i am using now and this one works like a champ
View 3 Replies View RelatedWhile housecleaning I unplugged everything from my computer, dusted, and plugged everything back in, though I probably didn't put all the USB devices in the same order as before. Now my HDMI interface doesn't work, and the mouse and keyboard only work in safe mode. When I boot into normal mode, there's no cursor and no response to keyboard. What could have gone wrong?
View 1 Replies View Relatedmy keyboard will not work,have ended up using the on screen keyboard and takes forever to type.any ideas what i can do to repair it
View 2 Replies View Relatedthis happened 3 or 4 times on me while using internet explorer (i know that thats a bad browser) and watching Internet videos. i switched to google chrome and have had no problems until i was watching a Internet video and it happened again.
View 8 Replies View RelatedSo my disk drive wasn't working so my husband installed a new driver, it fixed my disk drive, but now my mic (built in) stopped working. I really need it to work bc my husband has PCS-ed to Japan for 18 months, and skype is kind of out only option to talk.
View 6 Replies View RelatedMy computer is unable access my router. The power went out for a second and clearly that did something. I have an HP p7-1174 desk top, running Windows 7 Home Premium x64. The processor is an AMD A8-3800.
There are now several devices in the manager with yellow exclamation points, all relegated to the LAN. I get a Code 31, unable to load drivers message. I ran the sfc scan and there were no integrity violations. I tried updating drivers without any luck. My router is working fine because my laptop and iPad both work online.
The problem seems to be that Windows can't load the drivers for my 802.11n wireless LAN card. I tried updating drivers but it said the driver was up to date. I tried changing manually but the only two listed were the same and when I clicked one, it said Windows was unable to load.
Recently my computer has been force closing applications like Photoshop and Windows Explorer. It usually happens when I right click in Explorer or try to open anything in Photoshop. When it happens, a dialogue box comes up that says "Windows Explorer has stopped working" or "Adobe Photoshop has stopped working" Under the details it displays this information:
Problem signature:
Problem Event Name:APPCRASH
Application Name:Explorer.EXE
Application Version:6.1.7600.16768
Application Timestamp:4d688122
[code].....
i have windows 7 pro 32 bit , radeon HD 5450 2gb and i just recently installed win 7 and i had no problems with my card on win xp
View 4 Replies View Relatedmy computer always display a message "display drivers has stopped working and recover"
View 1 Replies View Relatedmy daughter pressed a couple of keys earlier and now my laptop keyboard isnt working properly. It is really strage because a few keys are working but not in thier usual function. My partner logged out so now i am sat at a login screen and cant key in a password. The on screen keyboard is behaving the same way which is very odd! Any suggestions? I have only had it 3 weeks and have had no problems it's been great. My mrs said she was trying to type in a website and windows kept popping up when she typed, and then she logged out.
View 2 Replies View Relatedwhen typing after turning on computer letters b c d e t 3 are not working, did i shut something off?
View 2 Replies View RelatedWhenever i plug in my ethernet cable my keyboard stops working (g19 logitech). I can see the lights on the keyboard and screen but it stops functioning and i have to unplug/replug usb for it to be back to normal.
View 1 Replies View RelatedAs i read on forums my problem is quite common. Cod 2 and Cod 4 when i start multiplayer it crashes and gives me cod 2 stopped working error. My sound card is "High Definition Sound Device" i can't find stereo mix on my pc and i tried plugging a mic in pc and still the games crash. Single player works fine.
View 4 Replies View RelatedI can use a usb pendrive, or a memory card reader in my usb.But both of my protable usb hard drives are not showing when plugged in.I have tried a usb 'Y' cable.but no good.Both drives work on my netbook..But not on my windows 7 pc.
View 3 Replies View Relatedafter unistalling nero 7 dvd rom disapeared , have physicaly uninstalled reset & reinstalled dvd rom still not showing it dose apear in divive manager but as failed driver , wont accept drivers from usb
View 2 Replies View RelatedI get this message a lot lately and today, it's just constant - to the point that I cannot get into my documents and work with them.grapefox grapefox has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies View RelatedI'm getting this error frequently lately and clicking Search for Solution online just brings up the error message again. Have to restart each time.
View 12 Replies View RelatedHaving a problem the past 2 days, when going into one particular file on my c drive I am getting windows explorer has stopped working and am prompted to restart or the infamous check for an online solution.I am able to open every other folder on this drive and have no issues, have tried a sfc /scannow but found no errors.
View 2 Replies View RelatedI recently renewed my internet security subscription. Immediately after doing so, the Calendar and Weather gadgets stopped working. The Calendar shows up as a blank orange/white square and opening up the Weather gadget will just reveal the "i" information symbol and a X close button, neither of which actually work.
Clock gadget also stopped working but then after an hour later it started working again and has been working since. I have tried deleting/uninstalling the gadgets but that hasn't worked. I have tried several tricks with the Windows command prompt which doesn't work either.
I'm considering using an automatic system restore (I don't have any manual saved points to restore) on just the gadgets themselves. Is that the way to go, or is there something else I could try? I've decided to name it: McAfee. I didn't at first, because it's been my experience whenever I mention a problem and mention an antiviral program.
I mention McAfee because it's an odd thing: I've searched forums and have found that others have had the almost the same problem; except with them it happens when you UNINSTALL McAfee, not renew it. I've also found another possible solution that involves deleting a registry key, but I'm way too nervous to try that.
When I start the computer it all seems normal until the desktop appears and the icons load. Before I can do anything I get a pop up saying Windows Explorer has stopped working. I have the option to restart windows or check on line for a solution. Both options give the same results. The icons disapperar and then reappear but I get the same pop up before I can do anything.I recently had a huge malware problem that I was working through with CatByte in this
View 2 Replies View RelatedIt initially started when I downloaded a torrent that was a folder containing a video. Once the download had completed I attempted to open the folder but I got the message "Windows Explorer has stopped working - windows is checking for a solution to the problem", then a different windows pops up with "Windows explorer is restarting". After a few seconds the start bar vanishes then comes back almost immediately. I thought that possible the folder I had downloaded was corrupt so tried deleting it, but when I right clicked on the folder I got the same. I used a program called Glary utilities to permanently delete the folder and that did the trick.A few days passed and I used utorrent to download another, different video, which was also contained in a folder, and I am having the same message come up on this one - "Windows Explorer has stopped working - windows is checking for a solution to the problem" This is the only folder, as far as I'm aware, that this happens with. One time when I tried to open it the following came up instead of the usual "windows explorer has stopped" - The instruction at 0x0a04b890 referenced memory at 0x033f3d0e. The memory could not be read. Click on OK to terminate this program. run scndisk, chkdisk, spybot S&D, malwarebytes, Avast and Microsoft security essentials and some registry cleaners/fixers but nothing has helped. I also downloaded a program called "WER_Explorer" which apparently creates a dump file whenever the error occurs, but I can't open make any sense of it all. I downlaoded the above program from [URL]. I can access the folder when I run in safe mode, and the folder is shared on a home network and I can access it from my laptop.
View 2 Replies View RelatedOk first of all im sirgail or giga from philippines and im new to the forum. I came here to seek help about my problem its been 3 days already been looking for a solution with my problem but no luck on finding a topic with same problem with me[CODE]whenever i click close the program or check online for a solution and close the program still it will popup again ( the error). Its annoying but somehow i manage to skip it by pressing ctrl+alt+delete task manager and click processes and end process the explorer.exe in order for me to use the internet and browse but the only problem is i cant go to "My computer" drives cause the error will popup again and i cant right click on the desktop and the task bar is not there cant even see the windows or press the windows startup
View 7 Replies View RelatedEverytime I wanted to open my folder and files, this thing appear on my screen. Then, it refreshed everything and the folder that I opened is gone. So, i have to open that folder again and still this windows appear again. It's hard for me to open a folder because of this. I have tried the ways in the internet and it's not working at all.
View 1 Replies View RelatedI installed Photoshop 7.0 about 6 months ago with Windows 7, 64-bit operating system. It successfully installed and I have been using it with no issues. Over this weekend, it just stopped working and I get the following error:
"Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable."
I have uninstalled Photoshop and tried to reinstall it but still have the same issue.
when i start any game i get a message that executable for FreeCell stopped working and then it says that window will close the program and would try to find a solution for the problem and last i offered to debug or to close the program
View 9 Replies View Relatedwhen i started firefox it gives an error " firefox has stopped working ". and it gives options for closing program or check on line solution and close the program. Previously it works normal.
View 1 Replies View Related