have amd64 dual core motherboard, running vistax64. vista told us to do somthing to improve operation and restart computer. when tried to restart computer it would not even turn on. so removed battery from mother board to reset to factory settings. computer then would turn on, but after first screen telling system, got loading bar. it finished, but didnot beep. got clicking sounds and screen went blank. and would not load freather.
when my computer goes into sleep mode, it wont come back...i have to turn off the computer& restart it. it says a driver is missing NIVIDA GeForce. I guess I dont know what that is or where to find it to either uninstall it or update it...i cant find it in the device manager...not when i type it in to search for it...i guess im stumped as to what to do..
New computer. Vista Home Premium. FSX continually stops loading and have to restart the loading process. Six times to get it loaded, but all sytems not functioning. Loaded Accelerator crashed whole system had to do repair of FSX and start over again with continual stoppage. Don't know where to go from here. It worked fine with XP
I have my Vista laptop (HP) hooked up to an external monitor, I have been using the sleep mode at night. The laptop is closed and on a shelf that is very hard to get to. I would like to shut it off at night. I can shut it off with the keyboard. Is there any way possibly software controlled to turn it back on? To reach the power button on the laptop you must first raise the lid which there is not room to do
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
I am embarrassed to ask it. Previously I had WindowsXP on my laptop - to turn it off you went to Start, Turn Off Computer. This laptop is using Vista, and I cannot find anything comparable. Last night I turned it off using the off-on button, so got the Windows did not shut off properly message when I turned it on; and I have a "thing" about leaving my computer on overnight. Also, is there a way of hiding all the command bars to "hide" like you can with the taskbar on the bottom?
For about 1-2 years my computer ran fine until recently. Now, whenever I start up my computer it boots all the way to the Vista loading screen, seems as if it loads all the way, then shuts down with no warning. This happens at the same point every time. I tried putting in the Vista DVD and starting that up in an attempt to reinstall or repair Vista, but I get the same results on the same loading screen. The computer is custom built by myself.
when I had to open Internet Explorer (I use Mozilla) to access my school email account. Everything went fine and when I was done I reopened Mozilla to browse again. I got one of those annoying spam web popups saying I had a computer infection and clicked out of it. A few minutes later my pc just randomly rebooted. I have had viruses before but it has never shut down randomly before. So I immediately restarted in safemode and ran my spyware tools. I found 3 trojans (I no longer remember their names) and removed them. I rebooted and it starts to load windows but reboots before it reaches the user account screen. I can get into safe mode and I did run my spyware tools again, they didn't find anything at all. I figured I had somehow damaged my system and so I downloaded a windows repair disc and repairedit. It didn't work. I've run startup repair and that didn't work or find anything wrong either.
Would over clocking it when your turn on the computer and then before you turn off your computer you put it back to factory settings screw it up???? or what The reason i ask is because when i turn off my computer it gives me the BSOD then the card goes back to factory settings but i can play the OC version of the card
i have been having a few problems with my new vista computer its a hp txz 2500z with vista buisness and im the administrater acount if that will help first prob is when i try to log off or shut or restart down the computer it hangs in the shutingdown or loging off screen and i have to use the power button to turn it off
other prob is the taskmanager wont show up. i see its icon in the bottom right bar (green gridlike box) it jus wont show up on the screen last some programs wont open like itunes or the conect to a network and network setings and sometimes windows defender i think they might run in the background but i cant get taskmanager running
I have a new Asus Laptop with Vista. Windows Mail has never worked right. After startup it only works for a period of time. (Anywhere from 5 minutes to 1 hour) It then just shows the following error messages. It also will not send an email until I restart my computer. It always works after a startup. I have Zone Alarm, but it acted this way before I loaded it. Is there a setting that should be changed? My internet connection is a Sprint Mifi. This is quite frustrating. I was able to load previous contacts from Outlook express without problems.
An unknown error has occurred. Protocol: SMTP, Port: 0, Secure(SSL): No, Error Number: 0x800C0148. An unknown error has occurred. Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800C0148
I tried to restart my computer and it is stuck on shutting down. It did this before and I hardbooted and had to wait over an hour for the computer to come back on. It was not reading my external drive so I hit restart and it is just sitting here doing nothing. I don't like hard booting but don't know how to get out of this. I obviously can't look at my event as I am stuck in shutting down right now. I have a gateway GT5628 quad core. The only stupid thing I did today was go into msconfig and click on tools, disable UAC and launch. It said reboot. My challenges began. do I hard boot or what here?
It shut down totally and then I turned it back on and now the screen is black. It started up but has gone black. don't know if it is working to start or not. It is 26 minutes since I wrote this and my computer is still trying to boot up. It is going through a correct the error routine. I don't know what has changed. I did not upgrade. Home Premium was installed on my computer. I have tons of room. It does not read my external hard drive on last boot up going through the same stuff here. Gateway said just wait it may take an hour. Everytime I boot? What is with that. I can't get into my passport for Microsoft from this computer on the network. This is a fiasco.
We tried to restart the computer manually, but to no avail. Vista loaded Windows, but before prompting me with a login screen, it dumbed again. We then tried to boot it in safe mode. Everything works fine there, so we tried to reboot normally again. Another dumb. We tried yet again, after removing the disc. Nothing. Since then we've tried system recovery to set it back a few days, we've tried to let it repair itself, we've tried to unplug everything (everything - mouse, keyboard, sound - everything but the monitor). The monitor, by the way, have some weird lines running down the screen, which notably aren't there when booting in safe mode.
The error code that appears on the dumb is as follows: STOP: 0x000000050 (0x8F875370,0x00000001,0x8EB5AB0A,0x00000000)
whenever I put the computer to sleep mode and move the mouse while it's getting into sleep mode, it'll either restart or kill the computer. When it kills the computer, the fans still run but the lights on the front go out. There is also no picture on the monitor. To turn off the computer, I have to force a shutdown by holding the power button for around 4 seconds. Then, when I try to turn on the computer again, the fans turn on, the hard drive runs, but still no lights on the front of the case nor picutre on the screen. I fixed it by clearing the RTC RAM on the motherboard. After doing that, the computer would boot up, but if I did sleep mode and moved the mouse, then the computer would die again, and I'd have to clear the RTC RAM again. I'm wondering why this happens with sleep mode. I use Vista Home Premium 64-bit. Is there a solution to this problem or does anyone else have this problem?
When I click on my windows mail icon, it won't launch unless I restart my computer. Then it will launch and works fine but if I close the program, it won't launch again. I also get an error message that says the following: Outlook Express at 0x0359399d referenced memory at 0x0000006c. The memory could not be written. Click ok to terminate the program. At the top of the window this message appears in it says the following Outlook Express Foldersync Window Class: WinMail. exe-application error.
have amd 64 dual core processer. running vistax64 vista told us to do somthing to improve performance and restart computer. when tried to restart computer would not even turn on. removed battery from mother board , left it out for a while and put it back in. computer would turn on it got first screen telling what processer got loading bar, which finished. it did not beep after. got clicks instead and screen went blank. nothing more.
I have a Dell Inspiron 1521 laptop that this past week decided to do a Windows update and afterwards was running at 100% cpu and really slow. After everything I did and everything I knew to do I decided to clean the HD and re-install the OS. I partitioned the HD and tried to install Vista. It got all the way thru to the point it was "suppose" to reboot and ask for my name and comp info and just shut down. When I turned it back on a window popped up saying something to the effect of "windows restared unexpectedly or had an unexpected error please select ok to restart your computer and installation of Windows" so then I have to re-install all over again and it failed again and again. I ran the pre-boot system assessment and found out my HD crashed. I installed a new HD and ran the pre-boot assessment again and everything checks out but I'm still getting the box to pop up cause it keeps turning itself off at the same point as I mentioned above. I can't/ don't know how to get into DOS so I can check the motherboard but I'm getting ready to throw this thing up against the wall.
I can't figure out how to turn the computer off using only the key board. In previous windows, it was Windows/U/S , or maybe Windows/U/U. With Vista, I seem to have to use the mouse, or the infernal laptop touch pad, to get to, then click on, an arrow which displays a list, which requires the use of the touch pad again, because the list has no accelerator keys. 4 steps, each more complicated than one letter, where one keyboard letter used to do.
Also, I don't have them side by side, but it seems that when playing Solitaire, it took longer to turn over each set of 3 cards, than it did for me on WinXP or Win98, and I'm sure the Vista CPU is faster than the others I've used. (It's a Toshiba Satellite laptop, which came with Vista installed, but I don't know the speed.
All drivers are up to date.. Nothing in the event viewer to indicate a problem. If I try to burn to the DVD or read from it, my machine shuts off. Not reset, full shut down. No viruses, no spyware/malware. I'm behind a NAT firewall with SPK and use the Windows Firewall and Avast so I'm pretty sure it's not something evil that has gotten on my machine. Googling doesn't reveal anything. Has anyone seen anything similar..Dell or not? I don't mind not having the DVD for burning because I have other machines that I can burn from, but if I can't read from the DVD drive without the machine shutting down, I may as well have a netbook.
every time i turn my computer on i have to mute my mic? is there a way i can set it where i don't have to keep muting my mic after every shut down or restart?
I just recently turned off my laptop by pressing the off button and not the proper way on the start menu ( I know I'm an idiot) and now it won't turn on or off. It is now a black screen and when I press the on button it blinks purple and then red. I am currently using my friend's computer to post this. Does anyone have any advice as to what I should do in order for it to wake up?
I am typing this a second time because every time I come to this page in IE it ends like it knows im going to mess with it... Anyway, When I open IE my homepage opens fine... I can go to different pages regularly for awhile... Then... I type in a website and BOOM, It wont load the page... yahoo google doesn't matter... Wont load it. Ive reset to default settings and that doesn't help... Ive deleted all my cookies and run AVG and its not finding anything. I uninstalled AVG now because if I turn on my computer it freezes it up. Ill post a copy of my HijackTHis log and maybe some of you can help me fix the problem. Also, When I go to say Google or any search engine and type in something, it searches for it... then when I click on a link that I was looking for... I get a page of adds. like a popup without the popup... if I hit back its my google search results.
I am running Windows Vista Home Premium 64-bit. It is a Dell Laptop. I've been getting the Blue Screen of death and whenever I shut the laptop lid the computer decides to restart itself. I went into power settings and changed the "lid" settings to "do nothing". That did not work. The error report is this:........
The 1st problem is everytime I close my lid/turn off the power/click the sleep button to put my computer to sleep before I go to sleep myself at night, I always wake up and my computer is at the log in screen, but it has restarted without any settings I'm aware of making it restart. I then log into my computer and it says that "windows has recovered from an error causing it to shutdown" etc etc.
Then 2nd problem is whenever my computer does come back from sleep, which it does if it hasn't been asleep long, or whenever it is restarted in general...my monitor settings from my dual monitors changes. I have to go back into the properties tab and change it so I can drag my mouse from the left screen across to the right, and change which monitor is my main monitor. Sometimes my recycle bin icon even goes back to a different spot on the monitor.
Just got a new HP Pavilion d6500t with installed Vista Ultimate x64. Has been tough going, but was scraping by until today. I installed Quickbooks (via download) and transferred my data files from my old pc to the new pc. Things seemed fine. then BAM!
The screen became "jumpy" and I received a number of error messages. Could not bring up Task Manager, so I had to shut down the pc manually (turned it off). Reboot involved a system check because of the manual shut-down. System check was fine...but, now my pc is frozen on a black screen with the hp logo in the middle. My choices are the usual: Press <ESC> to enable startup message, <F1> to enter System information...etc. I cannot go ANYWHERE from here. The F-keys are not responding AND I cannot even manually shut off the pc! I am a total novice when it comes to pc systems.
During inactivity my computer goes to sleep, actually it goes into a coma and can? it be awoken until I turn it off. And not by just turning it off at the switch, I have to unplug it and then restart it. At that point I get this message: The last attempt to resume the system from its previous location failed. Attempt to resume again? And then I have two choices; continue with system restore, or delete restoration data and proceed to system boot menu. The second choice is the only one that works. Why is my computer going into a coma, and how can I fix it?
I am not sure what has happened but the following message appears when turning on my comp: Quote: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1) Insert your windows installation disc and restart your computer 2) Choose your language settings and then click Next 3) Click 'Repair your Computer'.
If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: windowssystem32windload.exe. Status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt. I have the disk but how do i boot from it? I am very worried i've broken my comp for good.
First after doing an ordinary restart, my vista (ultimate) gets stuck for a LONG time at the loading screen and does not move, with the green loading bars. this happens every time i try to restart. i pop in my original vista disk and start the repair process...it says it found something wrong with my startup and it found what was wrong and that it was repaired. after this i get the message NTLDR, which is a whole nother problem. i ran the below to fix the NTLDR...
1. Put the Windows Vista installation disc in the disc drive, and then start the computer. 2. Press a key when you are prompted. 3. Select a language, a time, a currency, a keyboard or an input method, and then click Next. 4. Click Repair your computer............
Why, on Earth, that even my desktop computer which I've just recently re-installed windows XP is it annoying me with the yellow shield saying I need updates?! I just did it now and it said "done, now we need to restart" I click restart, it boots up and it STILL says I need to update! Could it be because, this computer ALSO has Microsoft Office 2003? If Office 2003 the problem, or is my luck just crap bad nowadays?
Running Windows Vista Ultimate. Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email. Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working. What do I need to do to prevent the display from turning off at odd intervals?
