have amd 64 dual core processer. running vistax64 vista told us to do somthing to improve performance and restart computer. when tried to restart computer would not even turn on. removed battery from mother board , left it out for a while and put it back in. computer would turn on it got first screen telling what processer got loading bar, which finished. it did not beep after. got clicks instead and screen went blank. nothing more.
View 7 Replies
I have my Vista laptop (HP) hooked up to an external monitor, I have been using the sleep mode at night. The laptop is closed and on a shelf that is very hard to get to. I would like to shut it off at night. I can shut it off with the keyboard. Is there any way possibly software controlled to turn it back on? To reach the power button on the laptop you must first raise the lid which there is not room to do
View 9 Replies View RelatedI am embarrassed to ask it. Previously I had WindowsXP on my laptop - to turn it off you went to Start, Turn Off Computer. This laptop is using Vista, and I cannot find anything comparable. Last night I turned it off using the off-on button, so got the Windows did not shut off properly message when I turned it on; and I have a "thing" about leaving my computer on overnight. Also, is there a way of hiding all the command bars to "hide" like you can with the taskbar on the bottom?
View 6 Replies View RelatedWould over clocking it when your turn on the computer and then before you turn off your computer you put it back to factory settings screw it up???? or what The reason i ask is because when i turn off my computer it gives me the BSOD then the card goes back to factory settings but i can play the OC version of the card
View 4 Replies View RelatedI can't figure out how to turn the computer off using only the key board. In previous windows, it was Windows/U/S , or maybe Windows/U/U. With Vista, I seem to have to use the mouse, or the infernal laptop touch pad, to get to, then click on, an arrow which displays a list, which requires the use of the touch pad again, because the list has no accelerator keys. 4 steps, each more complicated than one letter, where one keyboard letter used to do.
Also, I don't have them side by side, but it seems that when playing Solitaire, it took longer to turn over each set of 3 cards, than it did for me on WinXP or Win98, and I'm sure the Vista CPU is faster than the others I've used. (It's a Toshiba Satellite laptop, which came with Vista installed, but I don't know the speed.
All drivers are up to date.. Nothing in the event viewer to indicate a problem. If I try to burn to the DVD or read from it, my machine shuts off. Not reset, full shut down. No viruses, no spyware/malware. I'm behind a NAT firewall with SPK and use the Windows Firewall and Avast so I'm pretty sure it's not something evil that has gotten on my machine. Googling doesn't reveal anything. Has anyone seen anything similar..Dell or not? I don't mind not having the DVD for burning because I have other machines that I can burn from, but if I can't read from the DVD drive without the machine shutting down, I may as well have a netbook.
View 5 Replies View Relatedevery time i turn my computer on i have to mute my mic? is there a way i can set it where i don't have to keep muting my mic after every shut down or restart?
View 5 Replies View RelatedI just recently turned off my laptop by pressing the off button and not the proper way on the start menu ( I know I'm an idiot) and now it won't turn on or off. It is now a black screen and when I press the on button it blinks purple and then red. I am currently using my friend's computer to post this. Does anyone have any advice as to what I should do in order for it to wake up?
View 4 Replies View RelatedI am typing this a second time because every time I come to this page in IE it ends like it knows im going to mess with it... Anyway, When I open IE my homepage opens fine... I can go to different pages regularly for awhile... Then... I type in a website and BOOM, It wont load the page... yahoo google doesn't matter... Wont load it. Ive reset to default settings and that doesn't help... Ive deleted all my cookies and run AVG and its not finding anything. I uninstalled AVG now because if I turn on my computer it freezes it up. Ill post a copy of my HijackTHis log and maybe some of you can help me fix the problem. Also, When I go to say Google or any search engine and type in something, it searches for it... then when I click on a link that I was looking for... I get a page of adds. like a popup without the popup... if I hit back its my google search results.
View 4 Replies View RelatedIs there a way to assign a key or key combination to turn on the computer? OS is Vista,Home-basic
View 9 Replies View RelatedThe 1st problem is everytime I close my lid/turn off the power/click the sleep button to put my computer to sleep before I go to sleep myself at night, I always wake up and my computer is at the log in screen, but it has restarted without any settings I'm aware of making it restart. I then log into my computer and it says that "windows has recovered from an error causing it to shutdown" etc etc.
Then 2nd problem is whenever my computer does come back from sleep, which it does if it hasn't been asleep long, or whenever it is restarted in general...my monitor settings from my dual monitors changes. I have to go back into the properties tab and change it so I can drag my mouse from the left screen across to the right, and change which monitor is my main monitor. Sometimes my recycle bin icon even goes back to a different spot on the monitor.
have amd64 dual core motherboard, running vistax64. vista told us to do somthing to improve operation and restart computer. when tried to restart computer it would not even turn on. so removed battery from mother board to reset to factory settings. computer then would turn on, but after first screen telling system, got loading bar. it finished, but didnot beep. got clicking sounds and screen went blank. and would not load freather.
View 7 Replies View RelatedJust got a new HP Pavilion d6500t with installed Vista Ultimate x64. Has been tough going, but was scraping by until today. I installed Quickbooks (via download) and transferred my data files from my old pc to the new pc. Things seemed fine. then BAM!
The screen became "jumpy" and I received a number of error messages. Could not bring up Task Manager, so I had to shut down the pc manually (turned it off). Reboot involved a system check because of the manual shut-down. System check was fine...but, now my pc is frozen on a black screen with the hp logo in the middle. My choices are the usual: Press <ESC> to enable startup message, <F1> to enter System information...etc. I cannot go ANYWHERE from here. The F-keys are not responding AND I cannot even manually shut off the pc! I am a total novice when it comes to pc systems.
During inactivity my computer goes to sleep, actually it goes into a coma and can? it be awoken until I turn it off. And not by just turning it off at the switch, I have to unplug it and then restart it. At that point I get this message: The last attempt to resume the system from its previous location failed. Attempt to resume again? And then I have two choices; continue with system restore, or delete restoration data and proceed to system boot menu. The second choice is the only one that works. Why is my computer going into a coma, and how can I fix it?
View 5 Replies View Relatedwhen my computer goes into sleep mode, it wont come back...i have to turn off the computer& restart it. it says a driver is missing NIVIDA GeForce. I guess I dont know what that is or where to find it to either uninstall it or update it...i cant find it in the device manager...not when i type it in to search for it...i guess im stumped as to what to do..
View 4 Replies View RelatedRunning Windows Vista Ultimate. Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email. Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working. What do I need to do to prevent the display from turning off at odd intervals?
View 6 Replies View RelatedBefore the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
When I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
View 9 Replies View RelatedHow do I transfer my quickbooks 2007 data on my xp computer to my new vista x64 computer with quickbooks 2007? Can this be done? If so how do I do it?
View 5 Replies View RelatedI would like to export my contacts from my computer to my second computer. Both computers use Windows Mail. I tried exporting the contacts as CSV and vCard files. Using both methods, I was able to import my contacts into my second computer but they weren't neatly organized in files: i.e. business contacts, personal contacts, family, etc. Is there a way to export my contacts so they are still in the correct files and are neatly organized?
View 9 Replies View RelatedI have a Vista Laptop that needs to access a printer on an XP computer in my sister's law office. I'm having trouble trying to even have the XP computer show up consistently on my sister's computer. I can ping it every time from the command prompt. I have all firewalls unenabled on both computers. Identical user accounts on both systems. File and Print sharing set up on both. The Link Layer topology is present on the Vista computer. When the laptop sits for a while the XP computer will show up on the map; but, Vista comes up with an error message when I try to access the XP computer.
Beyond that, the map will lose the XP computer on occassion. The Vista computer can access the internet well enough through the router. At this point I can't install the printer on the Vista computer for not being able to access the XP computer from Vista. I've networked Vista computers before on XP networks, and this is the first time I've encountered this problem. Additional info; net view will not show xp computer. Workgroup name is the same for both XP and Vista computer. The restrict anonymous registry key on the XP computer is set at 1. Was originally set at 0. (Norton's Systemwork altered setting)
Is there any way to turn off UAC, but without having the nagging notification on the taskbar afterwards?
View 7 Replies View RelatedI have an old-school program that creates its directory at a hard-corded directory in C's root (C:xxx). Now, I don't want to run it with administrative privileges, I changed the directory's security permissions to (everyone - full control) and make them inherited to all its sub-directories. The program reads & writes fine with existing files. But the program creates a c file inside its directory and tries to let a C compiler on a network drive compile it. That 92s when the problem comes in. It creates the c file all right, but the c compiler cannot read it (saying =93permission denied=94). If I turn UAC off, I don 92t get errors, but I don 92t want to turn it off.
View 4 Replies View RelatedWindows 3d flip simply keeps switching from the application window to the 3D stack. Any click causes the applications to stack. Click again and the application reopens. Click anywhere in the sindow and I am back at the stack. How do I turn this off?
View 3 Replies View RelatedI m using vista x64 home premium and when i try to shut down my computer it looks like it is turning off then it starts windows again. Anyone had the same problem or know what to do ?
View 9 Replies View RelatedI have a dell inspiron 1525 and I have no idea how to turn the touchpad on it off
View 9 Replies View RelatedI turned it off to install a program because it required the UAC to be off, not I try and turn it on by going Control Panel > User Accounts > Turn User Account Control on or off > Continue > then ticking the box and pressing OK. I pressed Turn User Account Control on or off > Continue and find that it is not ticked and UAC is NOT on. I keep ticking the box and going OK but it just doesn't turn on.
View 9 Replies View Relatedhow do I turn on macaffee in vista home premium? It was working last nite until I put it into sleep mode. Today macaffe is disabled in the taskbar and am wondering how to turn it back on,
View 5 Replies View RelatedI am taking a test in my computer, and the requirements say that my computer is not ready because I need to turn off my pop up blocker. Where or how do I turn these off? I use Vista Ultimate and have Office 2007, Internet Explorer 8.
View 5 Replies View RelatedI'm trying to turn off DEP using bcdedit.exe /set {current} nx AlwaysOff on the cmd.exe but it says The boot configuration data store could not be opened Access is denied
View 5 Replies View RelatedIve had my Dell laptop for about 3 years and for the past year or so I have been unable to turn off my comp because everytime I do Windows never starts properly and makes me so system repair a couple times until finally it will boot properly after about an hour of repair. If anyone knows or has heard of a similar problem please let me know. (I have reformatted my comp a couple times in an effort to fix this and any other tech problems my Dell gives me)
View 6 Replies View Related
