DVD Drive Causes Computer To Turn Off
Apr 25, 2009
All drivers are up to date.. Nothing in the event viewer to indicate a problem. If I try to burn to the DVD or read from it, my machine shuts off. Not reset, full shut down. No viruses, no spyware/malware. I'm behind a NAT firewall with SPK and use the Windows Firewall and Avast so I'm pretty sure it's not something evil that has gotten on my machine. Googling doesn't reveal anything. Has anyone seen anything similar..Dell or not? I don't mind not having the DVD for burning because I have other machines that I can burn from, but if I can't read from the DVD drive without the machine shutting down, I may as well have a netbook.
View 5 Replies
ADVERTISEMENT
Feb 6, 2009
I have my Vista laptop (HP) hooked up to an external monitor, I have been using the sleep mode at night. The laptop is closed and on a shelf that is very hard to get to. I would like to shut it off at night. I can shut it off with the keyboard. Is there any way possibly software controlled to turn it back on? To reach the power button on the laptop you must first raise the lid which there is not room to do
View 9 Replies
View Related
Aug 27, 2009
I am embarrassed to ask it. Previously I had WindowsXP on my laptop - to turn it off you went to Start, Turn Off Computer. This laptop is using Vista, and I cannot find anything comparable. Last night I turned it off using the off-on button, so got the Windows did not shut off properly message when I turned it on; and I have a "thing" about leaving my computer on overnight. Also, is there a way of hiding all the command bars to "hide" like you can with the taskbar on the bottom?
View 6 Replies
View Related
Dec 29, 2008
Would over clocking it when your turn on the computer and then before you turn off your computer you put it back to factory settings screw it up???? or what The reason i ask is because when i turn off my computer it gives me the BSOD then the card goes back to factory settings but i can play the OC version of the card
View 4 Replies
View Related
Feb 25, 2008
have amd 64 dual core processer. running vistax64 vista told us to do somthing to improve performance and restart computer. when tried to restart computer would not even turn on. removed battery from mother board , left it out for a while and put it back in. computer would turn on it got first screen telling what processer got loading bar, which finished. it did not beep after. got clicks instead and screen went blank. nothing more.
View 7 Replies
View Related
Oct 22, 2009
I can't figure out how to turn the computer off using only the key board. In previous windows, it was Windows/U/S , or maybe Windows/U/U. With Vista, I seem to have to use the mouse, or the infernal laptop touch pad, to get to, then click on, an arrow which displays a list, which requires the use of the touch pad again, because the list has no accelerator keys. 4 steps, each more complicated than one letter, where one keyboard letter used to do.
Also, I don't have them side by side, but it seems that when playing Solitaire, it took longer to turn over each set of 3 cards, than it did for me on WinXP or Win98, and I'm sure the Vista CPU is faster than the others I've used. (It's a Toshiba Satellite laptop, which came with Vista installed, but I don't know the speed.
View 6 Replies
View Related
Jan 14, 2009
every time i turn my computer on i have to mute my mic? is there a way i can set it where i don't have to keep muting my mic after every shut down or restart?
View 5 Replies
View Related
Aug 5, 2009
I just recently turned off my laptop by pressing the off button and not the proper way on the start menu ( I know I'm an idiot) and now it won't turn on or off. It is now a black screen and when I press the on button it blinks purple and then red. I am currently using my friend's computer to post this. Does anyone have any advice as to what I should do in order for it to wake up?
View 4 Replies
View Related
Sep 16, 2008
I am typing this a second time because every time I come to this page in IE it ends like it knows im going to mess with it... Anyway, When I open IE my homepage opens fine... I can go to different pages regularly for awhile... Then... I type in a website and BOOM, It wont load the page... yahoo google doesn't matter... Wont load it. Ive reset to default settings and that doesn't help... Ive deleted all my cookies and run AVG and its not finding anything. I uninstalled AVG now because if I turn on my computer it freezes it up. Ill post a copy of my HijackTHis log and maybe some of you can help me fix the problem. Also, When I go to say Google or any search engine and type in something, it searches for it... then when I click on a link that I was looking for... I get a page of adds. like a popup without the popup... if I hit back its my google search results.
View 4 Replies
View Related
Feb 22, 2009
Is there a way to assign a key or key combination to turn on the computer? OS is Vista,Home-basic
View 9 Replies
View Related
May 4, 2008
The 1st problem is everytime I close my lid/turn off the power/click the sleep button to put my computer to sleep before I go to sleep myself at night, I always wake up and my computer is at the log in screen, but it has restarted without any settings I'm aware of making it restart. I then log into my computer and it says that "windows has recovered from an error causing it to shutdown" etc etc.
Then 2nd problem is whenever my computer does come back from sleep, which it does if it hasn't been asleep long, or whenever it is restarted in general...my monitor settings from my dual monitors changes. I have to go back into the properties tab and change it so I can drag my mouse from the left screen across to the right, and change which monitor is my main monitor. Sometimes my recycle bin icon even goes back to a different spot on the monitor.
View 6 Replies
View Related
Feb 25, 2008
have amd64 dual core motherboard, running vistax64. vista told us to do somthing to improve operation and restart computer. when tried to restart computer it would not even turn on. so removed battery from mother board to reset to factory settings. computer then would turn on, but after first screen telling system, got loading bar. it finished, but didnot beep. got clicking sounds and screen went blank. and would not load freather.
View 7 Replies
View Related
Jan 2, 2008
Just got a new HP Pavilion d6500t with installed Vista Ultimate x64. Has been tough going, but was scraping by until today. I installed Quickbooks (via download) and transferred my data files from my old pc to the new pc. Things seemed fine. then BAM!
The screen became "jumpy" and I received a number of error messages. Could not bring up Task Manager, so I had to shut down the pc manually (turned it off). Reboot involved a system check because of the manual shut-down. System check was fine...but, now my pc is frozen on a black screen with the hp logo in the middle. My choices are the usual: Press <ESC> to enable startup message, <F1> to enter System information...etc. I cannot go ANYWHERE from here. The F-keys are not responding AND I cannot even manually shut off the pc! I am a total novice when it comes to pc systems.
View 6 Replies
View Related
May 28, 2008
During inactivity my computer goes to sleep, actually it goes into a coma and can? it be awoken until I turn it off. And not by just turning it off at the switch, I have to unplug it and then restart it. At that point I get this message: The last attempt to resume the system from its previous location failed. Attempt to resume again? And then I have two choices; continue with system restore, or delete restoration data and proceed to system boot menu. The second choice is the only one that works. Why is my computer going into a coma, and how can I fix it?
View 5 Replies
View Related
Sep 20, 2009
when my computer goes into sleep mode, it wont come back...i have to turn off the computer& restart it. it says a driver is missing NIVIDA GeForce. I guess I dont know what that is or where to find it to either uninstall it or update it...i cant find it in the device manager...not when i type it in to search for it...i guess im stumped as to what to do..
View 4 Replies
View Related
Sep 30, 2009
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
View 9 Replies
View Related
Apr 15, 2008
How can I confirm that BitLocker is indeed turned off? Microsoft provides the instructions below, but this is after it has been on. I see no BitLocker options under Control Panel, Scenario 5: Turning off BitLocker Drive Encryption Scenario 5 describes how to turn off BitLocker Drive Encryption and decrypt the volume. The procedure is the same for all BitLocker Drive Encryption configurations on TPM-equipped computers and computers without a compatible TPM. When you turn off BitLocker, you can choose to either disable BitLocker temporarily, or to decrypt the drive. Disabling BitLocker allows TPM changes and operating system upgrades. Decrypting the drive means that the volume will once again be readable, and that all the keys are discarded. Once a volume is decrypted, you must generate new keys by going through the encryption process again.
Before you start You must be logged on as an administrator. The drive must be encrypted. To turn off BitLocker Drive Encryption Click Start, click Control Panel, click Security, and then clickBitLocker Drive Encryption. From the BitLocker Drive Encryption screen, find the volume on which you want BitLocker Drive Encryption turned off, and click Turn Off BitLocker Drive Encryption. From the What level of decryption do you wantdialog box, click either Disable BitLocker Drive Encryption or Decrypt the volume as needed. By completing this procedure, you have decrypted the operating system volume.
View 4 Replies
View Related
Mar 14, 2009
As of right now the only way I can get the external drive to spin down is to let it reach the time set to turn off the hard drive (via Vista Power Options) or to turn off the computer. I can tell when the external drive is spun down since the vibrations stop. Also the fan does not cause the vibrations as when it is spun down the air still flows.
1) I originally hard the SATA mode set to IDE, enabled SATA Port0-3 Native Mode and the drivers were from Vista/whatever the intel_chipset_9.1.0.1012 provided. On this motherboard there is no "safely remove" function, similar/exactly like what you normally see with a USB device. Because of this I opted to use HotSwap!. Unfortunately HotSwap! did not spin down the drive after safely hot swapping/removing the hard drive...........
View 7 Replies
View Related
Jun 2, 2009
I have just put a new ide dvd-rewriter into my computer and my computer doesn't recognize the new dvd drive or an existing cd drive. I cant see them in 'My Computer' or the 'device manager'. I don't no if this has anything to do with it but at the same time I also installed a new TV tuner into the computer and now I cant run the CD to fully install it.
View 9 Replies
View Related
Dec 25, 2008
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
View 9 Replies
View Related
Nov 2, 2007
Running Windows Vista Ultimate. Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email. Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working. What do I need to do to prevent the display from turning off at odd intervals?
View 6 Replies
View Related
Jul 8, 2008
I can't find my cd/dvd in my computer. i run vista home premiun 32bits.
View 9 Replies
View Related
Jun 30, 2008
I have a HD form old computer and want to add install it in the new computer with vista. BIOS recognizes the slave drive but vista keeps checking as a continuously before starting up. I tried to add slave drive after bootup. The vista again recognizes the drive and installed the drivers for it. After that it didn't let me access the harddrive.
View 9 Replies
View Related
Mar 23, 2008
my problem is that when once i plug in my usb drive or any hardwares (eg: ipods), it starts fuctioning , but when i try to remove it from the computer, the message "safe to remove hardware from the computer" appears , but the device would not have been actually stopped working. so i am forced to remove my hardwares even when the devices are working by which i fear that my devices malfunction.
View 9 Replies
View Related
Jun 1, 2008
When I connect a USB drive (SATA, 120GB) to a Vista Home Premium system (SP1), and Computer is selected, the Computer window says [not responding], as does the Management Console. Only when the drive is turned off, do Computer and Management Console function properly. The Vista system is running on an HP slimline desktop with an AMD Athlon 64 X2 Dual Core Processor, running the 32-bit OS, and using a high speed USB 2.0 enclosure ( ECS-STU35) with the Vista's USB drivers. BTW, the same USB drive mounts and its contents are accessible when attached to an XP Pro (SP2) system.
View 5 Replies
View Related
Dec 4, 2008
I recently purchased a new computer. While surfing last night I had noticed that when I looked at the defrag drive my computer said that it had last been defragged on Jan.of 2005. Do you find this (as I do) somewhat strange. I have contacted the store and the computer manufacturer. Does it seem like maybe they sold me a refurbished computer when I was supposed to have bought a new one. Just looking for an opinion.
View 7 Replies
View Related
Jul 29, 2009
i've had the Western Digital WDH1U10000N 1TB for a little over a week now. it was working fine, up until yesterday night. i made the switch from my PC to my laptop. when i plugged the USB into my laptop, the
external hard drive was not recognized. so, i tried plugging the USB into another port, and after a few minutes it was recognized by the laptop. this morning when i plugged the external hard drive back to my
PC, it is not recognized. moreover i can't find it anywhere on the computer. i know for a fact it is turned on, but i just can't find it anywhere on my computer. does anyone know what the problem is?
View 9 Replies
View Related
Apr 21, 2009
How can I sync a drive in my computer to an external drive. They are the same size.
View 6 Replies
View Related
Sep 10, 2008
I've got a strange situation. Anytime my cd drive is closed my computer lags to the point of no return. It won't load vista until I open the cd drive and while vista is running my computer will just about stop responding. All that moves is the mouse and I can click on things but they won't open until I reopen the cd drive.
View 7 Replies
View Related
Jun 30, 2008
I have a 500GB Desktop hard drive and want to know how I would go about backing up my entier conputer to it.
View 6 Replies
View Related
Sep 3, 2009
I am using a hard drive from a failed computer as a second drive on a Vista Home Premium 64 bit computer. I want to remove the two partitions of Vista from the old-second drive and recover that space. How do I do this? Is using fdisk possible? I remember doing that before Vista.
View 5 Replies
View Related
