I have a HD form old computer and want to add install it in the new computer with vista. BIOS recognizes the slave drive but vista keeps checking as a continuously before starting up. I tried to add slave drive after bootup. The vista again recognizes the drive and installed the drivers for it. After that it didn't let me access the harddrive.
View 9 RepliesI have a slave drive that was getting really filled (it was showing red). Now, it has disappeared from the "My Computer" section and I cannot find it. I don't know how to access it to take some things off. I have all of my photos and graphics on there and I'm scared of losing them.
View 9 Replies View RelatedI recently had a serious crash on my Shuttle61 series desktop which was running WXP Pro. I bought this machine with the OS pre-installed and the store is now out of business. Fortunately, my son just bought W7 for his machine and he gave me his Vista Home Premium Upgrade package and I decided to try it. Installed just fine after installing my trusty old W2K OS as a base, upgraded and its not as bad as I thought! So far only one obvious glitch... the OS is not recognizing my 320Gig "slave" drive which is where a lot of my pictures and data are stored.
I went into the BIOS and the Slave is showing up properly. I also popped the cover off and made sure all connections were snug, but this drive has been working just fine until the Vista install. Connecting external USB drive shows up just fine as well. So I am baffled about why the BIOS is seeing the drive, but the OS is not.
I am new-new-new to Vista. Don't know enough (about bios or any of that) to research my issue. Here's my deal...if I leave the computer on for a few days or what not my computer looses my slave drive. This drive is what I keep my pics and music on. When I reboot the drive re-appears. Any ideas as to why? This has just started out of the blue. I only noticed it because I was going to email a pic from the slave and the slave was not there.
View 4 Replies View RelatedThe motherboard on my old computer died. Hard drive was still OK, though. Have put it in an external HD enclosure and hooked it up to the new Gateway - running Vista. I don't have the disks for Office XP, it came pre-installed and I purchased it, but no longer have the product key. I do NOT want to upgrade to Office 2007, I want to use the Office XP I paid for, and was happy using. I can't transfer programs using WET or WETC - at least, I haven't been able to figure out how to do it, with both drives connected to the same computer. How can I configure Vista to run my the copy of Office XP currently installed on my old HD?
View 9 Replies View RelatedI have bought a new system with Vista Home Premium and I am trying to install an IDE hard drive as a slave. These are from my old system and I just want them installed so I can copy across stuff. I have done this in XP with no problem but I cannot seem to get this system to see them. If they do not show up in Bios does this mean Vista wont see them? I have tried varies jumper settings but my Bios just wont see either of my drives. My new system has a Sata HD installed so I am just connecting my slave IDE HD to the empty IDE connector on the Mobo.
View 5 Replies View RelatedI'm sorry I never wanted Vista and IE 7.0 or 8.0 from the numerous bad reviews and complaints... I understand the solution would've been to have it built by a local PC store? If I had the guts and the knowledge, I'd return it (now on the way) and order a custom made... and probably lose the bargain of the year??? :o)
ALSO, my present HD is still very good at 4 years of age, so is it possible to use it as a "slave" backup? Yet, in case of a computer calamity, wouldn't the data get lost also in the slave HD? So...is it possible to use it as an external backup? If so, what does it take?
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
I have bought a new system with Vista Home Premium and I am trying to install an IDE hard drive as a slave. These are from my old system and I just want them installed so I can copy across stuff.
I have done this in XP with no problem but I cannot seem to get this system to see them.
If they do not show up in Bios does this mean Vista wont see them? I have tried varies jumper settings but my Bios just wont see either of my drives.
My new system has a Sata HD installed so I am just connecting my slave IDE HD to the empty IDE connector on the Mobo.
I have just put a new ide dvd-rewriter into my computer and my computer doesn't recognize the new dvd drive or an existing cd drive. I cant see them in 'My Computer' or the 'device manager'. I don't no if this has anything to do with it but at the same time I also installed a new TV tuner into the computer and now I cant run the CD to fully install it.
View 9 Replies View RelatedFirst of all, I built my new PC a couple of days back installed vista ultimate 64 which is all good. The new HD is attached to the mother board via a SATA connection. I removed my old XP drive from the old PC and installed it to the new system also however as its quite old I have had to use the IDE connection on the mother board and set the jumpers to slave. I want to be able to access all my old music, photos etc.
Now Vista picks up the old XP drive through “computer” but when I try to access it, it sates I need to reformat the drive which of course I totally want to avoid!
I made sure the (ribbon type) IDE cable is using the correct (grey) slave connection and also made sure the jumper is set to slave. Apparently there is no need to set anything else to master as I’m using SATA connections. The old drive was also previously operational prior to the new build so I know there are no issues there.
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
I can't find my cd/dvd in my computer. i run vista home premiun 32bits.
View 9 Replies View Relatedmy problem is that when once i plug in my usb drive or any hardwares (eg: ipods), it starts fuctioning , but when i try to remove it from the computer, the message "safe to remove hardware from the computer" appears , but the device would not have been actually stopped working. so i am forced to remove my hardwares even when the devices are working by which i fear that my devices malfunction.
View 9 Replies View RelatedAll drivers are up to date.. Nothing in the event viewer to indicate a problem. If I try to burn to the DVD or read from it, my machine shuts off. Not reset, full shut down. No viruses, no spyware/malware. I'm behind a NAT firewall with SPK and use the Windows Firewall and Avast so I'm pretty sure it's not something evil that has gotten on my machine. Googling doesn't reveal anything. Has anyone seen anything similar..Dell or not? I don't mind not having the DVD for burning because I have other machines that I can burn from, but if I can't read from the DVD drive without the machine shutting down, I may as well have a netbook.
View 5 Replies View RelatedWhen I connect a USB drive (SATA, 120GB) to a Vista Home Premium system (SP1), and Computer is selected, the Computer window says [not responding], as does the Management Console. Only when the drive is turned off, do Computer and Management Console function properly. The Vista system is running on an HP slimline desktop with an AMD Athlon 64 X2 Dual Core Processor, running the 32-bit OS, and using a high speed USB 2.0 enclosure ( ECS-STU35) with the Vista's USB drivers. BTW, the same USB drive mounts and its contents are accessible when attached to an XP Pro (SP2) system.
View 5 Replies View RelatedI recently purchased a new computer. While surfing last night I had noticed that when I looked at the defrag drive my computer said that it had last been defragged on Jan.of 2005. Do you find this (as I do) somewhat strange. I have contacted the store and the computer manufacturer. Does it seem like maybe they sold me a refurbished computer when I was supposed to have bought a new one. Just looking for an opinion.
View 7 Replies View Relatedi've had the Western Digital WDH1U10000N 1TB for a little over a week now. it was working fine, up until yesterday night. i made the switch from my PC to my laptop. when i plugged the USB into my laptop, the
external hard drive was not recognized. so, i tried plugging the USB into another port, and after a few minutes it was recognized by the laptop. this morning when i plugged the external hard drive back to my
PC, it is not recognized. moreover i can't find it anywhere on the computer. i know for a fact it is turned on, but i just can't find it anywhere on my computer. does anyone know what the problem is?
How can I sync a drive in my computer to an external drive. They are the same size.
View 6 Replies View RelatedI've got a strange situation. Anytime my cd drive is closed my computer lags to the point of no return. It won't load vista until I open the cd drive and while vista is running my computer will just about stop responding. All that moves is the mouse and I can click on things but they won't open until I reopen the cd drive.
View 7 Replies View RelatedI have a 500GB Desktop hard drive and want to know how I would go about backing up my entier conputer to it.
View 6 Replies View RelatedI am using a hard drive from a failed computer as a second drive on a Vista Home Premium 64 bit computer. I want to remove the two partitions of Vista from the old-second drive and recover that space. How do I do this? Is using fdisk possible? I remember doing that before Vista.
View 5 Replies View RelatedOn first start up the comp couldnt find my dvd drive. Then after a few restarts it magicly found it. So Vista boots from disk, does all it should, then says to complete it needs to restart. there is only one restart in this whole precess. The drive im installing to have been formated, so its clean. So it restarts and pops up the screen to start the vista install all over again. Its not telling me to remove the disk while it does this, removed the disk when it restarted and all it said was boot error insert disk and press enter, or something to that effect. Now im noticeing after the many times its done this it takes a retarded amount of time to boot up and list my hard drives.
View 6 Replies View RelatedIf I have a hard drive in my PC, and have partitioned it and then I want to move this hard drive on to a new computer, will the partitions stay or will I need to re-partition the hard drive in the new PC?
View 8 Replies View RelatedI went to Fry's to have my computer (HP Windows XP) looked at because it wouldn't turn on. I was told that my mother board was fried. So, I bought a new computer (HP pavillion with vista) and a hard drive enclosure and the guys at Fry's put my hard drive in it and told me that I would just need to hook it up, turn it on and drag and drop my files. I've tried that but it's not working.
View 6 Replies View Relateddrive labels disappeared in "My computer" icons still there. (you know, there is not "My" but let me call it like that for easier talk.) but shows well in view - detail or list something like that. So, I tested some tips. I also set a ShowDriveLettersFirst key in the regedit. still, I can't see drive labels. but they are shown in a dialog box of "save as..." does anybody know the solution or reason of this? can't see drive labels these 3 pics. but they show in this mode. and in this one(save as...) The drive letters come first because of the tip that I tested. c: drive has no label.(means "local disk" in korean. ) d: drive's label is "DATA". You might already have an inkling. I'm Korean. please forgive my bad english. and characters in those pictures are korean letters "Hangul". I'm really really sorry because I can't prepare english version.
View 4 Replies View RelatedWhen I go into my computer I cannot see my drive letters, if I type in the drive letter I can then get to that drive:mad: this is very frustrating, I hate having to type in the letter of the drive that I wish to use
View 4 Replies View RelatedI have a WD 3,5 Hard drive and I bought I case so I could make it external. However, when I connect it to my laptop, running on Vista Home Premium x64 SP2 it does not work. The drive is seen by Vista (it shows up in the Disk Management section in Computer Management) but it does not show up in My Computer. In Disk Management it appears Disk 1, Dynamic, Invalid, with a red downwards arrow. As I have all my info there a soluyion that requires a format is not an option.
View 9 Replies View RelatedMy computer just died, with a complex Vista installation on a 250 GB drive. I have a replacement unit on its way, but is there any way to transfer the drive with the Vista install to the new computer and get a working system? My Vista is a full retail copy. I'm now working on XP from my backup machine, an old Dell Optiplex GX200, with a 733 MHZ P3 that's not capable of running Vista. I could reinstall Vista, but would lose an awful lot of data and installed programs.
View 9 Replies View RelatedWhen I R-click on my C:drive in Computer, I see an option labeled "Special Permissions", but it doesn't seem to be available. What are Special Permissions, and if they're important for anything, how do I enable them? Logging on as Administrator produces the same effect. Speaking as a user of Windows since its first release, I find Vista with its UAC, Permissions, and the need to repeatedly confirm every action I tak to be frustrating as hell.
View 9 Replies View RelatedI have a HP Pavillion dv6000 laptop computer. HP Total Care Advisor tells me only 4% is free on drive C. I ran disk defragmentation, disk cleanup, and uninstalled a good amount of programs I no longer use. It did not do anything. Once and awhile I get a prompt in the bottom right corner saying that I have low disk space. When I click on it it wants to run disk cleanup which does absolutely nothing. How do I free up space and make my computer perform the best it can?
View 8 Replies View Related