I am new-new-new to Vista. Don't know enough (about bios or any of that) to research my issue. Here's my deal...if I leave the computer on for a few days or what not my computer looses my slave drive. This drive is what I keep my pics and music on. When I reboot the drive re-appears. Any ideas as to why? This has just started out of the blue. I only noticed it because I was going to email a pic from the slave and the slave was not there.
View 4 RepliesI have a HD form old computer and want to add install it in the new computer with vista. BIOS recognizes the slave drive but vista keeps checking as a continuously before starting up. I tried to add slave drive after bootup. The vista again recognizes the drive and installed the drivers for it. After that it didn't let me access the harddrive.
View 9 Replies View RelatedI have a slave drive that was getting really filled (it was showing red). Now, it has disappeared from the "My Computer" section and I cannot find it. I don't know how to access it to take some things off. I have all of my photos and graphics on there and I'm scared of losing them.
View 9 Replies View RelatedI recently had a serious crash on my Shuttle61 series desktop which was running WXP Pro. I bought this machine with the OS pre-installed and the store is now out of business. Fortunately, my son just bought W7 for his machine and he gave me his Vista Home Premium Upgrade package and I decided to try it. Installed just fine after installing my trusty old W2K OS as a base, upgraded and its not as bad as I thought! So far only one obvious glitch... the OS is not recognizing my 320Gig "slave" drive which is where a lot of my pictures and data are stored.
I went into the BIOS and the Slave is showing up properly. I also popped the cover off and made sure all connections were snug, but this drive has been working just fine until the Vista install. Connecting external USB drive shows up just fine as well. So I am baffled about why the BIOS is seeing the drive, but the OS is not.
The motherboard on my old computer died. Hard drive was still OK, though. Have put it in an external HD enclosure and hooked it up to the new Gateway - running Vista. I don't have the disks for Office XP, it came pre-installed and I purchased it, but no longer have the product key. I do NOT want to upgrade to Office 2007, I want to use the Office XP I paid for, and was happy using. I can't transfer programs using WET or WETC - at least, I haven't been able to figure out how to do it, with both drives connected to the same computer. How can I configure Vista to run my the copy of Office XP currently installed on my old HD?
View 9 Replies View RelatedI have bought a new system with Vista Home Premium and I am trying to install an IDE hard drive as a slave. These are from my old system and I just want them installed so I can copy across stuff. I have done this in XP with no problem but I cannot seem to get this system to see them. If they do not show up in Bios does this mean Vista wont see them? I have tried varies jumper settings but my Bios just wont see either of my drives. My new system has a Sata HD installed so I am just connecting my slave IDE HD to the empty IDE connector on the Mobo.
View 5 Replies View Relatedi was installing my farcry 2 pc game on my computer but suddenly i got a blue screen and then i heard my hard drive loose speed and automatic restart why tis happen (after the restart everything was back to normal i install the game and play perfectly) i am using windows vista x32bit ultimate. here is the report
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1037
Files that help describe the problem (some files may no longer be available)
Mini122008-01.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode: 1000007e
BCP1: C0000005
BCP2: 81A54890
BCP3: 8B357A30
BCP4: 8B35772C
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1
I'm sorry I never wanted Vista and IE 7.0 or 8.0 from the numerous bad reviews and complaints... I understand the solution would've been to have it built by a local PC store? If I had the guts and the knowledge, I'd return it (now on the way) and order a custom made... and probably lose the bargain of the year??? :o)
ALSO, my present HD is still very good at 4 years of age, so is it possible to use it as a "slave" backup? Yet, in case of a computer calamity, wouldn't the data get lost also in the slave HD? So...is it possible to use it as an external backup? If so, what does it take?
I have bought a new system with Vista Home Premium and I am trying to install an IDE hard drive as a slave. These are from my old system and I just want them installed so I can copy across stuff.
I have done this in XP with no problem but I cannot seem to get this system to see them.
If they do not show up in Bios does this mean Vista wont see them? I have tried varies jumper settings but my Bios just wont see either of my drives.
My new system has a Sata HD installed so I am just connecting my slave IDE HD to the empty IDE connector on the Mobo.
First of all, I built my new PC a couple of days back installed vista ultimate 64 which is all good. The new HD is attached to the mother board via a SATA connection. I removed my old XP drive from the old PC and installed it to the new system also however as its quite old I have had to use the IDE connection on the mother board and set the jumpers to slave. I want to be able to access all my old music, photos etc.
Now Vista picks up the old XP drive through “computer” but when I try to access it, it sates I need to reformat the drive which of course I totally want to avoid!
I made sure the (ribbon type) IDE cable is using the correct (grey) slave connection and also made sure the jumper is set to slave. Apparently there is no need to set anything else to master as I’m using SATA connections. The old drive was also previously operational prior to the new build so I know there are no issues there.
How much ram would my 32 bit pc loose if i upgraded it with an ati x2 gfx card? Currently have 4gb ram & 512mb gfx card, with only 3.2mb ram recognised, ill assume it would be around 1.7gb?? If thats the case, a lot of users will be upgrading their vista to 64 bit. Dont know how many 64 bit users there are now, but looks like this card pretty much demands it.
View 6 Replies View RelatedIn some cases I may loose the video and I need to shut down Vista without seeing the actual screen. When it gets to the log in screen what combination of keys can I use to do so.
View 6 Replies View RelatedMassive botnet loose on Windows XP
View 4 Replies View RelatedThe onboard adapter is an ATI Radeon x1250 and the second adapter is an ATI HD2400. When I connect 4 monitor, everytime I shut down or restart my pc I loose all my settings. The second monitor is always disabled and put at the left side of my primary monitor. I installed catalyst 9.1 drvers and the pc is a Lenovo Thinkcentre A61 9143-CTO.
View 6 Replies View RelatedVery often after Windows has automatically downloaded updates I lose my connection to the Internet (wireless connection) and have to use Systems Restore to fix it. Can I prevent this happening?
View 4 Replies View RelatedI am having issues with ntune. I want to OC my GPU and I cannot. When I install ntune I loose the abilities to tweak the video settings. As a matter of fact it seems like the software gets screwy and nothing shows when the window opens.
View 5 Replies View RelatedIf I remove a windows mail account will I lose all of the email in the account?
View 5 Replies View RelatedI am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View Relatedi just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies View RelatedBefore I remove a USB thumb drive, I click the green check from notification area; I click the message that appears next to the green check, Safely remove USB Mass Storage Device - drives (F:, G; then a dialog box appears that states, This device can now be safely removed from computer.
The light on the thumb drive, however, stays lighted. I previously followed a procedure where the light would go off on the thumb drive when I did a Safely Remove.
Should the light on the thumb drive go off before it can be safely removed? If so, how do I get the thumdrive light to go off?
With the advent of terabyte hard drives, is there a work around for the limitatation of 26 letters for drive designations. I have a new computer with 2 terabyte hard drives, two DVD's, several USB connections, and I am running three different programs from ISO files stored on the hard drive with Daemon Tools, all of which take up drive letters. I have Windows Vista Home Premium, but see no work around for this limitation. I have searched Microsoft KB finding nothing addressing this issue. I am hoping that some one knows of a work around for the problem
View 9 Replies View Relatedi bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View RelatedI have just put a new ide dvd-rewriter into my computer and my computer doesn't recognize the new dvd drive or an existing cd drive. I cant see them in 'My Computer' or the 'device manager'. I don't no if this has anything to do with it but at the same time I also installed a new TV tuner into the computer and now I cant run the CD to fully install it.
View 9 Replies View RelatedI recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
View 7 Replies View RelatedI was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
View 6 Replies View Related