I am using a hard drive from a failed computer as a second drive on a Vista Home Premium 64 bit computer. I want to remove the two partitions of Vista from the old-second drive and recover that space. How do I do this? Is using fdisk possible? I remember doing that before Vista.
View 5 RepliesBefore the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
i've had the Western Digital WDH1U10000N 1TB for a little over a week now. it was working fine, up until yesterday night. i made the switch from my PC to my laptop. when i plugged the USB into my laptop, the
external hard drive was not recognized. so, i tried plugging the USB into another port, and after a few minutes it was recognized by the laptop. this morning when i plugged the external hard drive back to my
PC, it is not recognized. moreover i can't find it anywhere on the computer. i know for a fact it is turned on, but i just can't find it anywhere on my computer. does anyone know what the problem is?
If I have a hard drive in my PC, and have partitioned it and then I want to move this hard drive on to a new computer, will the partitions stay or will I need to re-partition the hard drive in the new PC?
View 8 Replies View RelatedI went to Fry's to have my computer (HP Windows XP) looked at because it wouldn't turn on. I was told that my mother board was fried. So, I bought a new computer (HP pavillion with vista) and a hard drive enclosure and the guys at Fry's put my hard drive in it and told me that I would just need to hook it up, turn it on and drag and drop my files. I've tried that but it's not working.
View 6 Replies View RelatedI have a WD 3,5 Hard drive and I bought I case so I could make it external. However, when I connect it to my laptop, running on Vista Home Premium x64 SP2 it does not work. The drive is seen by Vista (it shows up in the Disk Management section in Computer Management) but it does not show up in My Computer. In Disk Management it appears Disk 1, Dynamic, Invalid, with a red downwards arrow. As I have all my info there a soluyion that requires a format is not an option.
View 9 Replies View RelatedThe Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index
Windows defender
Windows search
Superfetch
System Restore
Readyboost
Defragmenter
I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done?
What file/folders do I need to copy to the external drive?
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
View 5 Replies View RelatedI have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
View 4 Replies View RelatedI just used Windows Vista to back up my drive to an external drive. It said the backup was successful but when I went to safely remove hardware, I got this message: " Windows can't stop your Generic volume device because it is in use. Close any programs or windows that might be using the device, and then try again later. "I made sure everything was closed, checked with Task Manager and tried again. Same message. After 20 minutes, I finally just disconnected it.
View 4 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View RelatedI was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies View Relatedi bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View RelatedI was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
View 5 Replies View RelatedI have just put a new ide dvd-rewriter into my computer and my computer doesn't recognize the new dvd drive or an existing cd drive. I cant see them in 'My Computer' or the 'device manager'. I don't no if this has anything to do with it but at the same time I also installed a new TV tuner into the computer and now I cant run the CD to fully install it.
View 9 Replies View RelatedAfter an automatic update from Windows failed to finish and computer shut down... I did a manual update but now the Photo Gallery says my picture files are corrupt. AND my system restore point ONLY shows today... no previous dates to restore to.
View 4 Replies View RelatedI have Windows XP and Vista. I always go through "safely remove hardware" before pulling off USB drive on XP. However, I have been trying to do the same on Vista, it seems that I cannot do the same as XP. For instance, I plug in my USB on Vista and it appears as H drive on Vista, when I am ready to do "safely remove hardware", I don't see the device drive H is on the "Safely remove hardware" window, so I cannot stop the H drive. I am concerned about the Vista hardware.
View 5 Replies View RelatedI have an external hard disk and recently try to plug into my USB port to transfer a file from my laptop to the external hard disk. Unfortunately, i could not find the hard disk in my computer, neither it opens automatically.
View 6 Replies View RelatedRight now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
when exporting to flash drive I am getting an error message saying the directory I am exporting to needs to be empty. I am using a new flash drive; what does the error mean?
View 4 Replies View Relatedi have an older maxtor 250gb ide hard drive and i am trying to put it in my computer so i can reformat it and install vista ultimate, the thing is when i go to disk manager i can see the drve, feel the drive, but it wont let me initialize it or anything, it comes up as "the request could not be performed because of an I/O devise error, the disk was originally in my modded xbox and i could acces it with xp.
View 9 Replies View RelatedI have a new pc with only 256MB of RAM- how hard is it to add memory? Also, how do I find out how many GB the hard drive is?
View 4 Replies View RelatedI purchased a new hard drive and named it NEW-BACKUP. I did a exact disk copy from my old BACKUP drive. My wife uses the old drive now. I have renamed my new drive to BACKUP. I am doing complete system backup's pretty frequently. To verify that the backups are happening, I typed in the command "wbadmin get versions" and got a list of the backups. The disk name showed up as "NEW-BACKUP". "NEW-BACKUP" is the destination drive for the backup and renamed as "BACKUP.
View 4 Replies View RelatedI just inserted a SD/MMC Card in my laptop, and it changed my external hard drive letter from F to G?, how can I change it back to F again?, as I had everything setup on the FRIVE, now nothing recognises it?
View 3 Replies View Relatedi have problem when i try to install windows xp. i have laptop hp parvilion dx6650us entertainment notbook pc, vista install on it but i want to install windows xp. when windows xp boot i got this message. Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. is there any solution so that i can install windows xp.
View 8 Replies View RelatedI just installed a new hd WD500g sata to my box. Vista "sees" the new hd in device manager, but doesnt see it in "my computer. It is freshly installed and straight out of the bubble wrap,I was thinking gee, maybe it needs formatted...but i dont see that option anywhere...maybe im missing something.... i donno...first time i've run into this....usually the drives are "seen" right away.....
View 2 Replies View RelatedWhat is the best way to add a partition to a hard drive in safe mode or in normal mode.
Thanks in advance.