As of right now the only way I can get the external drive to spin down is to let it reach the time set to turn off the hard drive (via Vista Power Options) or to turn off the computer. I can tell when the external drive is spun down since the vibrations stop. Also the fan does not cause the vibrations as when it is spun down the air still flows.
1) I originally hard the SATA mode set to IDE, enabled SATA Port0-3 Native Mode and the drivers were from Vista/whatever the intel_chipset_9.1.0.1012 provided. On this motherboard there is no "safely remove" function, similar/exactly like what you normally see with a USB device. Because of this I opted to use HotSwap!. Unfortunately HotSwap! did not spin down the drive after safely hot swapping/removing the hard drive...........
The Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index Windows defender Windows search Superfetch System Restore Readyboost Defragmenter I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done? What file/folders do I need to copy to the external drive?
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
I have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
I found my Mechwarrior 4 Vengeance disk and decided to play a bit. It installed fine and I'd ran it before, but then when I tried to run it, the disk would spin and I'd get the loading image. The disk suddenly stops spinning, then the program closes and I get the same old "This program has stopped working..." error. I've tried compatibility modes and running as administrator, but I still have no idea what's wrong.
I just got a new vista computer for my Christmas and everything works perfectly apart from my disc drive. I have a few software cd's that I need to install but when I put the disc in, nothing happens. It doesn't even spin the disc and is not labelled on "My Computer." I don't know what else
All drivers are up to date.. Nothing in the event viewer to indicate a problem. If I try to burn to the DVD or read from it, my machine shuts off. Not reset, full shut down. No viruses, no spyware/malware. I'm behind a NAT firewall with SPK and use the Windows Firewall and Avast so I'm pretty sure it's not something evil that has gotten on my machine. Googling doesn't reveal anything. Has anyone seen anything similar..Dell or not? I don't mind not having the DVD for burning because I have other machines that I can burn from, but if I can't read from the DVD drive without the machine shutting down, I may as well have a netbook.
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
i bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
How can I confirm that BitLocker is indeed turned off? Microsoft provides the instructions below, but this is after it has been on. I see no BitLocker options under Control Panel, Scenario 5: Turning off BitLocker Drive Encryption Scenario 5 describes how to turn off BitLocker Drive Encryption and decrypt the volume. The procedure is the same for all BitLocker Drive Encryption configurations on TPM-equipped computers and computers without a compatible TPM. When you turn off BitLocker, you can choose to either disable BitLocker temporarily, or to decrypt the drive. Disabling BitLocker allows TPM changes and operating system upgrades. Decrypting the drive means that the volume will once again be readable, and that all the keys are discarded. Once a volume is decrypted, you must generate new keys by going through the encryption process again.
Before you start You must be logged on as an administrator. The drive must be encrypted. To turn off BitLocker Drive Encryption Click Start, click Control Panel, click Security, and then clickBitLocker Drive Encryption. From the BitLocker Drive Encryption screen, find the volume on which you want BitLocker Drive Encryption turned off, and click Turn Off BitLocker Drive Encryption. From the What level of decryption do you wantdialog box, click either Disable BitLocker Drive Encryption or Decrypt the volume as needed. By completing this procedure, you have decrypted the operating system volume.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
I was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
I have been looking for an app that will record streaming audio ( web radio stations) like these News/Talk Radio Programs Streaming on the Internet and this Phil Hendrie Streaming on the Internet I found a program today: Wavosaur free audio editor with VST and ASIO support too complicated
I have been using messer Messer - Memo Session Sound Recorderfor years on my XP machine but it won't work on my vista. My mic records all sound in the room even when I breathe/sniff
I recently updated my main Vista Ultimate PC with SP1 without problems but have 2 more PC's with Vista Home Premium full retail O.S. I would like to format the hard drives in each while installing Vista and wondered if I needed to install the latest Intel motherboard drivers/software before installing SP1 from a purchased stand alone disk or if I would be better off to just install Vista and then SP1 with it's built-in Intel drivers, then update them later if needed?
I am on a dial-up internet connection and don't want to download SP1 twice more! Both of these PC's have the same Intel DG965WH m-board, same DVD multi-drives, same Core2 Duo processors, same 3 GB's of DDR2 800 Mhz RAM, same nVidia 7600 GT GPU's, same IDT onboard audio. All of the above are listed on Microsoft's Hardware Compatibility site as Vista Certified.
I recently updated my main Vista Ultimate PC with SP1 without problems but have 2 more PC's with Vista Home Premium full retail O.S. I would like to format the hard drives in each while installing Vista and wondered if I needed to install the latest Intel motherboard drivers/software before installing SP1 from a purchased stand alone disk or if I would be better off to just install Vista and then SP1 with it's built-in Intel drivers, then update them later if needed? I am on a dial-up internet connection and don't want to download SP1 twice more! Both of these PC's have the same Intel DG965WH m-board, same DVD multi-drives, same Core2 Duo processors, same 3 GB's of DDR2 800 Mhz RAM, same nVidia 7600 GT GPU's, same IDT onboard audio. All of the above are listed on Microsoft's Hardware Compatibility site as Vista Certified.
I just want to share with you my thoughts about smart card authentication implementation in Vista. I know that smart card logon, also known as strong authentication or two- actor authentication, can be performed on a machine that is connected to a domain. And in Vista SP1 it's been added the support for biometric factor authentication so that, with the appropriate security tokens, strong three-factor authentication can be performed through Kerberos on machines connected to a domain.
Said that I really can't understand why Microsoft doesn't give a standard option, included natively in her oss, to enable strong authentication in stand alone machines that are not connected to a domain. I try to explain in details what I mean. It happens often, for security reasons, that companies have stand alone pcs not connected to the internet and to the company domain. From my point of view achieving a strong authentication on a stand alone machine is not so complicated; Let's think at this scenario:.................
I have Windows XP and Vista. I always go through "safely remove hardware" before pulling off USB drive on XP. However, I have been trying to do the same on Vista, it seems that I cannot do the same as XP. For instance, I plug in my USB on Vista and it appears as H drive on Vista, when I am ready to do "safely remove hardware", I don't see the device drive H is on the "Safely remove hardware" window, so I cannot stop the H drive. I am concerned about the Vista hardware.
I have my Vista laptop (HP) hooked up to an external monitor, I have been using the sleep mode at night. The laptop is closed and on a shelf that is very hard to get to. I would like to shut it off at night. I can shut it off with the keyboard. Is there any way possibly software controlled to turn it back on? To reach the power button on the laptop you must first raise the lid which there is not room to do
i have an older maxtor 250gb ide hard drive and i am trying to put it in my computer so i can reformat it and install vista ultimate, the thing is when i go to disk manager i can see the drve, feel the drive, but it wont let me initialize it or anything, it comes up as "the request could not be performed because of an I/O devise error, the disk was originally in my modded xbox and i could acces it with xp.
I purchased a new hard drive and named it NEW-BACKUP. I did a exact disk copy from my old BACKUP drive. My wife uses the old drive now. I have renamed my new drive to BACKUP. I am doing complete system backup's pretty frequently. To verify that the backups are happening, I typed in the command "wbadmin get versions" and got a list of the backups. The disk name showed up as "NEW-BACKUP". "NEW-BACKUP" is the destination drive for the backup and renamed as "BACKUP.
I just inserted a SD/MMC Card in my laptop, and it changed my external hard drive letter from F to G?, how can I change it back to F again?, as I had everything setup on the FRIVE, now nothing recognises it?
I just installed a new hd WD500g sata to my box. Vista "sees" the new hd in device manager, but doesnt see it in "my computer. It is freshly installed and straight out of the bubble wrap,I was thinking gee, maybe it needs formatted...but i dont see that option anywhere...maybe im missing something.... i donno...first time i've run into this....usually the drives are "seen" right away.....
I recently bought a western digital 1TB hard drive which I had to reformat before I could use. Everything works good now, except for onething. Sometimes the computer doesn't want to restart while the new drive is plugged in. If I remove it from the USB port prior to restarting, it will restart just fine.
It shuts down and turns on without an issue. This only happens when I restart the system with it plugged in.
