Insert Windows Installation Disc And Restart Your Computer, Choose Language Settings And Then Click Next

Apr 15, 2007

I am not sure what has happened but the following message appears when turning on my comp: Quote: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1) Insert your windows installation disc and restart your computer
2) Choose your language settings and then click Next
3) Click 'Repair your Computer'.

If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: windowssystem32windload.exe. Status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt. I have the disk but how do i boot from it? I am very worried i've broken my comp for good.

View 9 Replies


ADVERTISEMENT

Should Get Option To Choose Installation Language?

Mar 23, 2008

When I start windows home premium on a new pc for the first time should i get an option to choose the installation language? I bought a pc in germany and the start up failed i got an error message in an endless loop i got it to start with the recovery disc but that has set it to German and i cant change it. Can anyone confirm or not that if the set up had run correctly i should have been offered the option to set up in English. if this is the case i can go back to the manufacturer and complain.

View 4 Replies View Related

Unexpected Error: Restart Computer And Installation Of Windows

Apr 26, 2009

I have a Dell Inspiron 1521 laptop that this past week decided to do a Windows update and afterwards was running at 100% cpu and really slow. After everything I did and everything I knew to do I decided to clean the HD and re-install the OS. I partitioned the HD and tried to install Vista. It got all the way thru to the point it was "suppose" to reboot and ask for my name and comp info and just shut down. When I turned it back on a window popped up saying something to the effect of "windows restared unexpectedly or had an unexpected error please select ok to restart your computer and installation of Windows" so then I have to re-install all over again and it failed again and again. I ran the pre-boot system assessment and found out my HD crashed. I installed a new HD and ran the pre-boot assessment again and everything checks out but I'm still getting the box to pop up cause it keeps turning itself off at the same point as I mentioned above. I can't/ don't know how to get into DOS so I can check the motherboard but I'm getting ready to throw this thing up against the wall.

View 4 Replies View Related

Restart" I Click Restart, It Boots Up And It STILL

Nov 8, 2009

Why, on Earth, that even my desktop computer which I've just recently re-installed windows XP is it annoying me with the yellow shield saying I need updates?! I just did it now and it said "done, now we need to restart" I click restart, it boots up and it STILL says I need to update! Could it be because, this computer ALSO has Microsoft Office 2003? If Office 2003 the problem, or is my luck just crap bad nowadays?

View 4 Replies View Related

Error Insert System Disc

May 3, 2010

i installed windows xp first on my 1tb hard drive on a partition that worked fine, then i installed vista 64bit on a second partition and that was fine i got the option to dual boot and everything was fine. Now i decided to get rid of the xp partition because i wasnt using it so i copied all the files i wanted from it and put it in my vista partition then i used geparted (3rd party partition tool) to format my xp partition.

I then restarted my pc and get a error please insert system disc, now i think the problem is because the xp was first to install that has all the boot records on it so when i formatte dthe partition i deleted the boot files etc etc. I used my vista recovery disc and used the command prompt to try and re write the mbr using bootrec.exe/fixmbr and /fixboot and a few pther option but nothing worked. I had a similar problem a while ago i wrote a simialr command using the recover console to re write the whole mbr but cant remember what it was.Now i have reinstalled vista on the xp partition and can get access to my other vista partition but really want to make the other partition bootable again..........

View 4 Replies View Related

Custom Installation Disc: Windows Updates Install Automatically

Mar 26, 2008

I'm wondering if there is a simple way to take your Vista Installation Disc and use it to create a custom installation disc that also includes updated drivers and updated hotfixes. The goal would be that during a clean install, those updated drivers and Windows Updates are installed automatically.

For a specific example, I use a USB Wireless Adapter. If I could create a custom windows disc that includes those drivers, then I my USB Wireless Adapter would be recognized and I could therefore allow Windows to connect to the Internet during Setup to see if there are any hotfixes and updates.

View 6 Replies View Related

Cannot Launch Windows Mail Unless I Restart Computer

Mar 23, 2008

When I click on my windows mail icon, it won't launch unless I restart my computer. Then it will launch and works fine but if I close the program, it won't launch again. I also get an error message that says the following: Outlook Express at 0x0359399d referenced memory at 0x0000006c. The memory could not be written. Click ok to terminate the program. At the top of the window this message appears in it says the following Outlook Express Foldersync Window Class: WinMail. exe-application error.

View 9 Replies View Related

Creating Windows Install Disc From OEM Computer

Jun 7, 2009

I have a ThinkCentre PC with Windows XP Home installed on on it. I've got another machine that is currently running Vista. If I make a install cd from the XP machine, can I install it on my other Compaq machine that is running vista (it came with XP Media Center Edition 2005 but it had all this crap preloaded onto it). Or, can I reformat the XP Media Center Edition PC, and then make an install dvd out of that (i.e. will it remove the crap that Compaq put on it?).

View 4 Replies View Related

Windows Freezes Click Computer Icon

Jun 9, 2009

Today when I tried to open "My Computer" I found that windows would stop responding, forcing me to open task manager and log off my account and back on. I ran my ESET virus scan and it found 1 problem but that did not seem to help me out. Anyone had any similar issues with this? Seems rather uncommon as a google search didn't come up with many problem-specific web pages. Running Vista Home Basic service pack 1

View 4 Replies View Related

Burning CD: "insert Blank Disc"?

Apr 29, 2008

I insert a CD to burn, and even though its blank, I get a message saying "insert blank disc" and it ejects my disc. This has happened with many CD's that Itry.

View 8 Replies View Related

Cannot Restart Installation

May 2, 2008

I Just got a new computer and upon first turning it on my daughter accidentally hit the button on my power strip turning the computer off mid-installation. Now when I turn on my computer it looks as if windows is trying to start but goes to a message stating "Windows could not complete the installation. To install windows on this computer, restart the installation." I then click "OK" and it just brings me back to the same message after re-starting. Could anyone please help me get this thing back on track?

View 9 Replies View Related

Computer Shuts Down: Run CHKDSK /F And Check For Hard Drive Corruption And Then Restart Your Computer"

Sep 30, 2009

Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"

Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........

View 9 Replies View Related

Extnded 4 Monitor, Restart Pc And Loose All Settings

Feb 1, 2009

The onboard adapter is an ATI Radeon x1250 and the second adapter is an ATI HD2400. When I connect 4 monitor, everytime I shut down or restart my pc I loose all my settings. The second monitor is always disabled and put at the left side of my primary monitor. I installed catalyst 9.1 drvers and the pc is a Lenovo Thinkcentre A61 9143-CTO.

View 6 Replies View Related

Disc Recovery Took Back To Factory Settings

Oct 18, 2009

I had to do a disc recovery which took me back to factory settings. Most things are required to be set up from scratch. Do I have to set up my e-mail account all over again?

View 5 Replies View Related

Display Settings And Desktop Right Click Disabled?

Jul 30, 2009

All of a sudden i cannot right click on the desktop, and i cannot get into the display settings, i get this message - Your system admin has disabled launching if the display settings control panel.

I logged into the Admin account right now, so surely i should be allowed to do this?

View 9 Replies View Related

Restart After Installation, Screen Blanks

Feb 18, 2008

I did a full format/reinstall of my drive and whenever i try to install my 8800 GTS's (G92) drivers, i go to restart the computer after installation and the screen blanks and says no input detected although i can shut the computer down with the windows key command. So basically my problem is not that Vista isn't running, it's that i don't see anything.

View 4 Replies View Related

Installation PCPitstop Optimize2: Pc Do Not Restart

Jun 4, 2008

A failed application installation (PCPitstop Optimize2 - but they say they've never heard of my problem) sent my Home Premium PC into chaos. Then a spiral of attempted repairs led to serious startup failures, with Startup Repair launching each time. Eventually I seemed to find a Restore Point which worked well enough to reinstall and update my Bullguard security suite and online data backups, and my SpySweeper antispyware protection. I could also get into Safemode again - but only by setting this in System Configuration - not with F8 presses. (In fact on the initial boot-up screens, if I do get to options pages at all the up/down arrows don't work and I always have to accept the default option anyway.)

But after about a week of OK operation that included various restarts the startup failure problem has returned - requiring one or more restores to get started at all. I now dare not heed the Microsoft nag messages about restarting (so as to complete the repeated updates installations that the restores have removed). Also one unanswered post to a forum cited another problem that I now find I have too - that while the nags remain active, burning data to a backup CD fails to complete and the drive freezes...

View 8 Replies View Related

Custom Installation Disc

Mar 23, 2008

I'm wondering if there is a simple way to take your Vista Installation Disc and use it to create a custom installation disc that also includes updated drivers and updated hotfixes. The goal would be that during a clean install, those updated drivers and Windows Updates are installed automatically. For a specific example, I use a USB Wireless Adapter. If I could create a custom windows disc that includes those drivers, then I my USB Wireless Adapter would be recognized and I could therefore allow Windows to connect to the Internet during Setup to see if there are any hotfixes and updates. I've read a little about vLite but don't know if I trust it completely.

View 6 Replies View Related

Getting Error Code 0x80004005 When Boot From Installation Disc

Jun 6, 2009

I have a virus and am trying to do a fresh clean install of vista home premium. When I boot from the install disc and run the install program it give me error code 0x80004005 and says that my computer does not have enough free space. It advises me to free up enough space in order to copy files. Problem is I have tons of free space on my hardrive. I have two partitions and both have plenty of free space.

View 8 Replies View Related

Restart Down The Computer Hangs

Aug 25, 2008

i have been having a few problems with my new vista computer its a hp txz 2500z with vista buisness and im the administrater acount if that will help first prob is when i try to log off or shut or restart down the computer it hangs in the shutingdown or loging off screen and i have to use the power button to turn it off

other prob is the taskmanager wont show up. i see its icon in the bottom right bar (green gridlike box) it jus wont show up on the screen last some programs wont open like itunes or the conect to a network and network setings and sometimes windows defender i think they might run in the background but i cant get taskmanager running

View 7 Replies View Related

Stops Working Until I Restart Computer

Sep 17, 2009

I have a new Asus Laptop with Vista. Windows Mail has never worked right. After startup it only works for a period of time. (Anywhere from 5 minutes to 1 hour) It then just shows the following error messages. It also will not send an email until I restart my computer. It always works after a startup. I have Zone Alarm, but it acted this way before I loaded it. Is there a setting that should be changed? My internet connection is a Sprint Mifi. This is quite frustrating. I was able to load previous contacts from Outlook express without problems.

An unknown error has occurred. Protocol: SMTP, Port: 0, Secure(SSL): No, Error Number: 0x800C0148. An unknown error has occurred. Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800C0148

View 9 Replies View Related

X64 Loading: Restart Computer Not Turn On

Feb 25, 2008

have amd64 dual core motherboard, running vistax64. vista told us to do somthing to improve operation and restart computer. when tried to restart computer it would not even turn on. so removed battery from mother board to reset to factory settings. computer then would turn on, but after first screen telling system, got loading bar. it finished, but didnot beep. got clicking sounds and screen went blank. and would not load freather.

View 7 Replies View Related

Restart Computer Stuck On Shutting Down

Jul 19, 2008

I tried to restart my computer and it is stuck on shutting down. It did this before and I hardbooted and had to wait over an hour for the computer to come back on. It was not reading my external drive so I hit restart and it is just sitting here doing nothing. I don't like hard booting but don't know how to get out of this. I obviously can't look at my event as I am stuck in shutting down right now. I have a gateway GT5628 quad core. The only stupid thing I did today was go into msconfig and click on tools, disable UAC and launch. It said reboot. My challenges began. do I hard boot or what here?

It shut down totally and then I turned it back on and now the screen is black. It started up but has gone black. don't know if it is working to start or not. It is 26 minutes since I wrote this and my computer is still trying to boot up. It is going through a correct the error routine. I don't know what has changed. I did not upgrade. Home Premium was installed on my computer. I have tons of room. It does not read my external hard drive on last boot up going through the same stuff here. Gateway said just wait it may take an hour. Everytime I boot? What is with that. I can't get into my passport for Microsoft from this computer on the network. This is a fiasco.

View 5 Replies View Related

New Computer Cannot Read Disc

Jul 29, 2009

I have a strange problem and I cannot find the same issue anywhere on the net.I just bought the components for a new computer and along with it a OEM copy of Visa Home premium 64bit. When I put everything together i booted the computer and it asked me to boot from cd/dvd obviously as I had no OS installed. I installed my brand new Vista disc and nothing happened and then said it had failed to boot from the disc. After a few attempts I thought i would try with my XP dvd and I had no problems at all. I figured I would roll with the install on XP and then try the Vista disc as an upgrade. My computer will not detect the Vista disc in the machine. I cannot explore the disc, run it etc. My obvious though would be that it was a bad disc yet it runs fine on my laptop (which already has a version of vista installed on it) I then proceeded to install a different DVD writer / reader and there is exactly the same problem. Anyone have any idea what might be causing this and if there is anything I can do, to not be able to even read the contents of the disc is just weird! Incidentally I can view and run other CD's and DVD's that I have tried this seems very specific to the vista DVD

View 4 Replies View Related

"Windows Not Update Computer's Boot Configuration. Installation Cannot Proceed."

Jun 18, 2010

I am upgrading from XP to Vista (on the way to Windows 7). After it completes the compatibility check it starts to copy files. About 20 minutes into the process the upgrade aborts with the following message: "Windows could not update the computer's boot configuration. Installation cannot proceed."

View 5 Replies View Related

Restart The Computer Manually But Crashes Before Login

May 3, 2010

We tried to restart the computer manually, but to no avail. Vista loaded Windows, but before prompting me with a login screen, it dumbed again. We then tried to boot it in safe mode. Everything works fine there, so we tried to reboot normally again. Another dumb. We tried yet again, after removing the disc. Nothing. Since then we've tried system recovery to set it back a few days, we've tried to let it repair itself, we've tried to unplug everything (everything - mouse, keyboard, sound - everything but the monitor). The monitor, by the way, have some weird lines running down the screen, which notably aren't there when booting in safe mode.

The error code that appears on the dumb is as follows: STOP: 0x000000050 (0x8F875370,0x00000001,0x8EB5AB0A,0x00000000)

View 9 Replies View Related

Sleep Mode Restart Or Kill The Computer

Aug 27, 2008

whenever I put the computer to sleep mode and move the mouse while it's getting into sleep mode, it'll either restart or kill the computer. When it kills the computer, the fans still run but the lights on the front go out. There is also no picture on the monitor. To turn off the computer, I have to force a shutdown by holding the power button for around 4 seconds. Then, when I try to turn on the computer again, the fans turn on, the hard drive runs, but still no lights on the front of the case nor picutre on the screen. I fixed it by clearing the RTC RAM on the motherboard. After doing that, the computer would boot up, but if I did sleep mode and moved the mouse, then the computer would die again, and I'd have to clear the RTC RAM again. I'm wondering why this happens with sleep mode. I use Vista Home Premium 64-bit. Is there a solution to this problem or does anyone else have this problem?

View 9 Replies View Related

Right Click Of The Mouse Freezes Computer

Jun 8, 2008

whenever i go on a file and go under "send file to" by the right click of the mouse it freezes and then the whole desktop goes under not responding?

View 6 Replies View Related

Turn Off The Computer And Restart Driver Missing Nividia

Sep 20, 2009

when my computer goes into sleep mode, it wont come back...i have to turn off the computer& restart it. it says a driver is missing NIVIDA GeForce. I guess I dont know what that is or where to find it to either uninstall it or update it...i cant find it in the device manager...not when i type it in to search for it...i guess im stumped as to what to do..

View 4 Replies View Related

How To Delete IPhone Disc From Computer Directory

Apr 9, 2010

I have an iPhone icon in my "Computer" directory which I can't get rid of. I have removed iTunes, etc. from my system but can't get rid of this icon. I can't delete, eject, safely remove, anything. I can't see it anywhere in the device manager, even after invoking the command line SET DEVMGR_SHOW_NONPRESENT_DEVICES=1, and "showing" hidden devices, it is nowhere to be found. I can't find a registry entry, or directory entry which even resembles this.

View 4 Replies View Related

Getting The Blue Screen Of Death And Whenever I Shut The Laptop Lid The Computer Decides To Restart Itself

Aug 27, 2009

I am running Windows Vista Home Premium 64-bit. It is a Dell Laptop. I've been getting the Blue Screen of death and whenever I shut the laptop lid the computer decides to restart itself. I went into power settings and changed the "lid" settings to "do nothing". That did not work. The error report is this:........

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved