Unexpected Error: Restart Computer And Installation Of Windows
Apr 26, 2009
I have a Dell Inspiron 1521 laptop that this past week decided to do a Windows update and afterwards was running at 100% cpu and really slow. After everything I did and everything I knew to do I decided to clean the HD and re-install the OS. I partitioned the HD and tried to install Vista. It got all the way thru to the point it was "suppose" to reboot and ask for my name and comp info and just shut down. When I turned it back on a window popped up saying something to the effect of "windows restared unexpectedly or had an unexpected error please select ok to restart your computer and installation of Windows" so then I have to re-install all over again and it failed again and again. I ran the pre-boot system assessment and found out my HD crashed. I installed a new HD and ran the pre-boot assessment again and everything checks out but I'm still getting the box to pop up cause it keeps turning itself off at the same point as I mentioned above. I can't/ don't know how to get into DOS so I can check the motherboard but I'm getting ready to throw this thing up against the wall.
View 4 Replies
ADVERTISEMENT
Apr 15, 2007
I am not sure what has happened but the following message appears when turning on my comp: Quote: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1) Insert your windows installation disc and restart your computer
2) Choose your language settings and then click Next
3) Click 'Repair your Computer'.
If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: windowssystem32windload.exe. Status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt. I have the disk but how do i boot from it? I am very worried i've broken my comp for good.
View 9 Replies
View Related
Aug 28, 2009
I bought Dell Studio in the middle of July and before today it was working just fine. But today I got the blue screen for the third time. It is really annoying. Showing the blue screen the system gets restarted. After restart it shows a message that says - "Windows has recovered from an unexpected error". Problem details shows the following texts:.........
View 6 Replies
View Related
Mar 23, 2008
When I click on my windows mail icon, it won't launch unless I restart my computer. Then it will launch and works fine but if I close the program, it won't launch again. I also get an error message that says the following: Outlook Express at 0x0359399d referenced memory at 0x0000006c. The memory could not be written. Click ok to terminate the program. At the top of the window this message appears in it says the following Outlook Express Foldersync Window Class: WinMail. exe-application error.
View 9 Replies
View Related
Jul 30, 2009
Vista 64 Home Premium. Woke to find my computer had rebooted itself during the night and Windows failed to restart. Didn't catch the error code, but the message said if Windows won't restart, insert startup disc and do a repair. That is what I ended up doing as Windows simply wouldn't start up. Anyway, repair worked but my desktop looks like from a week ago. The desktop icons for Thunderbird and a couple of other recently installed programs are no longer there. Their program folders, however, are still in the Program Files folder but with no .exe file. Is there a way to repair the programs so that they are in sync with my current windows install?
This is a new machine recently purchased from a popular online vendor. They installed Vista. I've only had it two weeks and have kept it in pristine condition and it has been working fine....until now. I think Vista tanked overnight during an update. I'm new to Vista, has this happened to others?
View 5 Replies
View Related
Jul 6, 2008
Computer freezes while i'm in the middle of something, the mouse pointer will get "stuck" for 3-4 seconds, then the screen goes black (but the power is still on). I get no message, and nothing works except for holding down the power button to turn off the pc. When I restart there is no record of any problem in the problem history.
View 7 Replies
View Related
May 2, 2008
I Just got a new computer and upon first turning it on my daughter accidentally hit the button on my power strip turning the computer off mid-installation. Now when I turn on my computer it looks as if windows is trying to start but goes to a message stating "Windows could not complete the installation. To install windows on this computer, restart the installation." I then click "OK" and it just brings me back to the same message after re-starting. Could anyone please help me get this thing back on track?
View 9 Replies
View Related
Sep 30, 2009
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
View 9 Replies
View Related
Feb 18, 2008
I did a full format/reinstall of my drive and whenever i try to install my 8800 GTS's (G92) drivers, i go to restart the computer after installation and the screen blanks and says no input detected although i can shut the computer down with the windows key command. So basically my problem is not that Vista isn't running, it's that i don't see anything.
View 4 Replies
View Related
Jun 4, 2008
A failed application installation (PCPitstop Optimize2 - but they say they've never heard of my problem) sent my Home Premium PC into chaos. Then a spiral of attempted repairs led to serious startup failures, with Startup Repair launching each time. Eventually I seemed to find a Restore Point which worked well enough to reinstall and update my Bullguard security suite and online data backups, and my SpySweeper antispyware protection. I could also get into Safemode again - but only by setting this in System Configuration - not with F8 presses. (In fact on the initial boot-up screens, if I do get to options pages at all the up/down arrows don't work and I always have to accept the default option anyway.)
But after about a week of OK operation that included various restarts the startup failure problem has returned - requiring one or more restores to get started at all. I now dare not heed the Microsoft nag messages about restarting (so as to complete the repeated updates installations that the restores have removed). Also one unanswered post to a forum cited another problem that I now find I have too - that while the nags remain active, burning data to a backup CD fails to complete and the drive freezes...
View 8 Replies
View Related
May 11, 2009
I have a new laptop with home premium on it....i'm trying to install a baseball game,but I keep getting the same message at setup "unexpected problem trying to create or write to logfile"...error #7 i've tried running the program as administrator and it has no effect. Might there be some other form of security that vista won't allow this software past?
View 7 Replies
View Related
May 2, 2008
I get this message when I try system restore after - it appears to be complete - in other words it finds a restore point, I agree and it does its thing. Just when everything is restarted the error message is that System restore was not successful due to an "unexpected error". I have a new Dell laptop running Vista Home Premium (SP1 has not downloaded yet) and Norton Internet Security 2007 and Spybot latest version. I tell you this because on my old XP desktop I had to change a setting on NAV to enable system restore to work and once I did that everything was fine. -
View 9 Replies
View Related
May 5, 2008
It's new laptop and just was running installation (Home Vista Premium), then suddenly a error message "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" or restart the computer, and then restart the installation". But no matter what I've tried, that message appears again.
View 4 Replies
View Related
Aug 25, 2008
i have been having a few problems with my new vista computer its a hp txz 2500z with vista buisness and im the administrater acount if that will help first prob is when i try to log off or shut or restart down the computer it hangs in the shutingdown or loging off screen and i have to use the power button to turn it off
other prob is the taskmanager wont show up. i see its icon in the bottom right bar (green gridlike box) it jus wont show up on the screen last some programs wont open like itunes or the conect to a network and network setings and sometimes windows defender i think they might run in the background but i cant get taskmanager running
View 7 Replies
View Related
Mar 31, 2008
Has anyone else experienced problems with Control Panel? Each time I click on Control Panel, I get an error and Windows tells me that Explorer has to restart (and it does).
View 7 Replies
View Related
Sep 17, 2009
I have a new Asus Laptop with Vista. Windows Mail has never worked right. After startup it only works for a period of time. (Anywhere from 5 minutes to 1 hour) It then just shows the following error messages. It also will not send an email until I restart my computer. It always works after a startup. I have Zone Alarm, but it acted this way before I loaded it. Is there a setting that should be changed? My internet connection is a Sprint Mifi. This is quite frustrating. I was able to load previous contacts from Outlook express without problems.
An unknown error has occurred. Protocol: SMTP, Port: 0, Secure(SSL): No, Error Number: 0x800C0148. An unknown error has occurred. Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800C0148
View 9 Replies
View Related
Feb 25, 2008
have amd64 dual core motherboard, running vistax64. vista told us to do somthing to improve operation and restart computer. when tried to restart computer it would not even turn on. so removed battery from mother board to reset to factory settings. computer then would turn on, but after first screen telling system, got loading bar. it finished, but didnot beep. got clicking sounds and screen went blank. and would not load freather.
View 7 Replies
View Related
Jul 19, 2008
I tried to restart my computer and it is stuck on shutting down. It did this before and I hardbooted and had to wait over an hour for the computer to come back on. It was not reading my external drive so I hit restart and it is just sitting here doing nothing. I don't like hard booting but don't know how to get out of this. I obviously can't look at my event as I am stuck in shutting down right now. I have a gateway GT5628 quad core. The only stupid thing I did today was go into msconfig and click on tools, disable UAC and launch. It said reboot. My challenges began. do I hard boot or what here?
It shut down totally and then I turned it back on and now the screen is black. It started up but has gone black. don't know if it is working to start or not. It is 26 minutes since I wrote this and my computer is still trying to boot up. It is going through a correct the error routine. I don't know what has changed. I did not upgrade. Home Premium was installed on my computer. I have tons of room. It does not read my external hard drive on last boot up going through the same stuff here. Gateway said just wait it may take an hour. Everytime I boot? What is with that. I can't get into my passport for Microsoft from this computer on the network. This is a fiasco.
View 5 Replies
View Related
Jun 18, 2010
I am upgrading from XP to Vista (on the way to Windows 7). After it completes the compatibility check it starts to copy files. About 20 minutes into the process the upgrade aborts with the following message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
View 5 Replies
View Related
May 3, 2010
We tried to restart the computer manually, but to no avail. Vista loaded Windows, but before prompting me with a login screen, it dumbed again. We then tried to boot it in safe mode. Everything works fine there, so we tried to reboot normally again. Another dumb. We tried yet again, after removing the disc. Nothing. Since then we've tried system recovery to set it back a few days, we've tried to let it repair itself, we've tried to unplug everything (everything - mouse, keyboard, sound - everything but the monitor). The monitor, by the way, have some weird lines running down the screen, which notably aren't there when booting in safe mode.
The error code that appears on the dumb is as follows: STOP: 0x000000050 (0x8F875370,0x00000001,0x8EB5AB0A,0x00000000)
View 9 Replies
View Related
Aug 27, 2008
whenever I put the computer to sleep mode and move the mouse while it's getting into sleep mode, it'll either restart or kill the computer. When it kills the computer, the fans still run but the lights on the front go out. There is also no picture on the monitor. To turn off the computer, I have to force a shutdown by holding the power button for around 4 seconds. Then, when I try to turn on the computer again, the fans turn on, the hard drive runs, but still no lights on the front of the case nor picutre on the screen. I fixed it by clearing the RTC RAM on the motherboard. After doing that, the computer would boot up, but if I did sleep mode and moved the mouse, then the computer would die again, and I'd have to clear the RTC RAM again. I'm wondering why this happens with sleep mode. I use Vista Home Premium 64-bit. Is there a solution to this problem or does anyone else have this problem?
View 9 Replies
View Related
Sep 20, 2009
when my computer goes into sleep mode, it wont come back...i have to turn off the computer& restart it. it says a driver is missing NIVIDA GeForce. I guess I dont know what that is or where to find it to either uninstall it or update it...i cant find it in the device manager...not when i type it in to search for it...i guess im stumped as to what to do..
View 4 Replies
View Related
Aug 27, 2009
I am running Windows Vista Home Premium 64-bit. It is a Dell Laptop. I've been getting the Blue Screen of death and whenever I shut the laptop lid the computer decides to restart itself. I went into power settings and changed the "lid" settings to "do nothing". That did not work. The error report is this:........
View 9 Replies
View Related
Feb 22, 2008
When I tried to install a software on Windows Vista 64 bit, I received an error 1603 during installation and installation failed.
It was installed sucessfully on Windows Xp and other versions. Could anyone tell me the reason and solution to this problem?
Do we need some changes in Install Shield?
View 9 Replies
View Related
Jul 4, 2008
I installed IE 8 beta 1 and decided to remove it per MS' instructions. The system reverted to IE7 but now when I launch IE, it crashes with a DEP error. I followed MS' help instructions and added IE7 to the DEP exclusion list. However, IE7 still crashes with the same error. I wanted to reinstall IE7 but I could not find it on MS' web site. - Is IE 7 for Vista available as a separate download?
- Any other suggestions with regards to the DEP error? Note: I have FF3 and Opera 9.5 on my system. I also use AVANT as a front end to IE. The interesting factor is that AVANT works just fine... which I see as odd being that it must have IE to work with.
View 8 Replies
View Related
Apr 29, 2008
I keep getting error message that installation has been interrupted when I try installing above subject softwares. when I tried to install office12 I got below message Error1935 ,97F81AF1-0E47-DC99-A01F-C8B2B9A1E18E ,HRESULT: 0x800736B3.
View 4 Replies
View Related
Jun 24, 2008
I had sp1 installed, installed a new video card(Gigabyte 8800GT nforce edition if that helps), had to reinstall the OS before the system would recognize the card. After reboot, I ran update and got a bunch of updates. A few days later, update listed sp1 under automatic updates. i ran the update and got this error:
Code 80070002
I've gotten this error before on another machine and it was pretty easily fixed by deleting a few folders(as per the instructions in the Help guide). This time, it isn't working. I've tried the steps listed at least a Dozen times, I've downloaded the stand-alone update, combined the error fix with a restart, and I always get the same error. Now, my computer is constantly telling me to install the update, but it won't let me. I really don't want to have to reinstall again.
View 9 Replies
View Related
Nov 11, 2009
I've been searching the net for a few days on how to fix this problem, so far useing programs like RegCure doesn't work at all, neither do most of the others.. So I decided to make an account and ask for help. When I try to install Atlas V14 (A program for translations) it comes up with Error 1935 and does a roleback, so i decided to try installing it on my laptop then copied files to PC and it comes up with a side-by-side error.. Im not too good with all the thinking stuff that goes with fixing comps. So if anyone knows how to fix the 1935 error or bypass the side-by-side thing that would help alot.
View 5 Replies
View Related
Mar 30, 2008
i am newbie to this forum.i came to know about this site from my friend. i was looking for a solution for my issue for past 3-4 months for the solution of Installation Problem of MS Office 2007 SP1 Update on Windows Vista Home Premium. please find attached file of windowsupdate.log for the error report.
View 5 Replies
View Related
Jun 6, 2009
I have a virus and am trying to do a fresh clean install of vista home premium. When I boot from the install disc and run the install program it give me error code 0x80004005 and says that my computer does not have enough free space. It advises me to free up enough space in order to copy files. Problem is I have tons of free space on my hardrive. I have two partitions and both have plenty of free space.
View 8 Replies
View Related
Feb 20, 2006
Im having some problems installing vista 5270. It will start the installation, do its first reboot, then when it goes to install the rest, it comes up with an error says: An error occurred whilst copying files. I have tried installing at first the 64-bit version, then the 32-bit version, and still the same error!? I have also tried burning both versions to DVD, and installing them, installing them off a virtual drive by mounting them, extracting all the files to a folder and installing them, and still come up with the same error!!
I have also tried to install it on another machine, but coming up with the same problem?! I got both copies of Vista (32 bit version and 64 bit) from different sources.
View 5 Replies
View Related
