Installation On 5270: An Error Occurred Whilst Copying Files
Feb 20, 2006
Im having some problems installing vista 5270. It will start the installation, do its first reboot, then when it goes to install the rest, it comes up with an error says: An error occurred whilst copying files. I have tried installing at first the 64-bit version, then the 32-bit version, and still the same error!? I have also tried burning both versions to DVD, and installing them, installing them off a virtual drive by mounting them, extracting all the files to a folder and installing them, and still come up with the same error!!
I have also tried to install it on another machine, but coming up with the same problem?! I got both copies of Vista (32 bit version and 64 bit) from different sources.
View 5 Replies
ADVERTISEMENT
Jun 14, 2009
I very recently purchased a Compal KHLB2. I inserted the Vista Ultimate x64 disk and went to work installing it. It goes through the initial process just fine, copying the files, expanding and whatnot. However, after it has to restart it will go to the part where the screen is black with the words "Please wait while Windows sets up your computer...", finally make it past that and then get back to the Installing Windows Vista Ultimate x64 page. It will then stay on Copying Vista Ultimate x64 files for a bit and then blue-screen me. Under Technical Information is tells me 0x00000124.
View 7 Replies
View Related
Mar 23, 2008
I am using a Dell XPS 420. I have been able to transfer files via a private network with no problems until now. I made a share folder with the correct permission. I can transfer any file under 5MB with no errors. If I send a file at 6MB it will process the folder and after 5 min I get this error message:
Network Error... There is a problem accessing C:userpublicetwork testfile name28624.zip.
It says make sure you are connected to the network and try again. Is there a timing issue causing the lost connection? I worked with Dell and since it worked in Jan 08 to reinstall the backup for the Dell Factory settings. I thought I would check with the Windows Vista Community before I do the reinstall. I also have another computer with Windows Vista Ultimate and I can transfer the files with no problem via Hamachi network.
View 4 Replies
View Related
Nov 12, 2008
When I start installing it, it goes through the "Copying Files" stage instantly, and then hangs up at 0% on "Expanding Files". Then, anywhere from 10 seconds to 3 minutes later, my screen goes black like it's not receiving a monitor signal anymore, and nothing else happens.
I Googled the problem and found a ton of threads here and elsewhere with the same issue, with a slight variation, but none of them had issues posted, and they were all relatively old.
View 7 Replies
View Related
Sep 16, 2009
I have various applications which I sell. Written in Visual Studio.net some in 2003, and some in 2008 versions. However the problem is the same with both. The applications have been running successfully on Vista 32 bit, but with Vista 64 bit, this error message appears when the user tries to start the program: Runtime error: An unhandled error has occurred. "An attempt to load a program with an incorrect format, (Exception from HRESULT:0x8007000B)" If the problem persists, please contact your software supplier.
View 5 Replies
View Related
Jun 3, 2008
This is my first time using Windows Mail and for whatever reason I am not able to send emails to people who have an office email address. The error message reads:
An unknown error has occurred. Subject 'Re: ', Account: 'mail.charter.net',
Server: 'mail.charter.net', Protocol: SMTP, Server Response: '421 charter.net
connection refused from [70.218.47.177]', Port: 25, Secure(SSL): No, Server
Error: 421, Error Number: 0x800CCC67.
View 9 Replies
View Related
Jul 29, 2009
I run Windows Vista Home Premium (32). I've used my HP Photosmart C4280 printer for about 2 years, worked fine for the most part. Lately I started having problems, so I uninstalled and reinstalled the driver & software (got the latest versions from HP download site). Since reinstall, my scanner isn't working. Whether I press the "Scan" button on the unit, or I select "Scan picture" or "Scan document" from the HP Solution Center, an error pops up: "An error occurred communicating with the scanning device. Please ensure that the printing device is properly connected and try again".
Also, I've uninstalled/reinstalled the drivers/software several times, cleaned temporary files and registry, still the problem persists. Having said that, the printing/copying works fine, so I know that the printer is properly connected. BTW, tried connecting the same printer to a friend's PC running Windows XP and it scans with no problem, so the issue must have something to do with HP interacting (non-interacting) with Vista.
View 8 Replies
View Related
Mar 15, 2009
I Can't change Date Or Time Every time i try to change the date it says An Error Has Occurred Unable TO save Changes. I'm Running Vista ultimate Sp1
View 9 Replies
View Related
Sep 5, 2009
An unknown error has occurred. Subject 'Re: please enjoy and forward', Account: 'pop-server.neo.rr.com', Server: 'smtp-server.neo.rr.com', Protocol: SMTP, Server Response: '421 cdptpa-omtalb.mail.rr.com Lost connection to [98.27.203.190]', Port: 25, Secure(SSL): No, Server Error: 421, Error Number: 0x800CCC67
View 9 Replies
View Related
Dec 2, 2009
Ive just formatted my hard drive and got a new graphics card -ATI 4870. When I try to run a game, using 'steam' it tries to install directx before failing, so I found the download myself and tried, it failed. The error said: 'INTERNAL SYSTEM ERROR OCCURRED refer to DxError.log and DirectX.log in your windows folder to determine problem.' So what any ideas, I need directx but I cant have directx. Wasnt sure if this post should go in here, gaming or graphics card. I figured here as its more a software issue.
View 5 Replies
View Related
Apr 17, 2008
I keep receiving an Internet Explorer script error message telling me that "an error has occurred on the script on the current page - do you want to continue.....?" Can anyone tell me why this is and how I can eliminate the problem? I keep asking computer technicians from various companies, but everyone is passing the buck and won't give me an answer. Also, the same messages keep being downloaded into my inbox - any thoughts on this too.
View 5 Replies
View Related
Mar 23, 2008
A very frustrating feature of Vista is the inability to copy certain files such as executable files over a network. Any attempt to copy an exe file from the network to an individual computer produces a message that this needs permission but then fails to complete the copy. Is there any way to configure Vista to allow me to copy a exe file form the network to another computer on the network.
View 5 Replies
View Related
Feb 27, 2009
Using Vista Ultimate 64bit We have created a bat file that performs multiple XCOPY commands to copy various files all over the network from key servers and workstations to the local machine into a PGP encrypted drive, drive letter V. So a typcical command might be something like: XCOPY \Server_Nameshare namespecial folder*.* V:Special Folder or XCOPY \Server_Namec$another folder*.* V:Another Folder
The local machine has a user logged in as a Domain Admin The network connection is 1gbit We have tried this bat file many different ways.
1) Manual Backup - by that I mean double clicking the bat file to run, sometimes is done and backs up everything in 8 minutes.
2) Scheduled Backup - task scheduler as domain admin DOMAINAdmin Name running with as high a priv as possible - everything backs up in 21 minutes Same scenarios, manual backup runs in 20 minutes, sometimes the scheduled is 40 minutes The local machine is running AV software - CA etrust - which also runs on an XP machine that does not display this speed behavior. The local machine is running Diskeeper 2009. I do not know if this matters, since the benchmarks are so different in each test. I know VIsta now does indexing of files for searching, could this be creating an issue? We have tried different switch ports, different network cables, verified the gbit.
View 4 Replies
View Related
Mar 23, 2008
I have a small network consisting of five machines. Two of the computers have Vista Home Premium installed and the others have various flavors of Windows XP installed. Copying and transferring files works flawlessly between the machines except for one of the Xp laptops which has very poor performance when communicating with either of the Vista machines. I can access this computer from either of the Vista machines and transfer files with no problem. However, if I use this laptop to access the Public folder on either of the Vista machines, the throughput is so slow to the point that Windows Explorer will "hang".
In an effort to solve this problem I have: Installed and run Network Magic on both computers...no problems found. I have installed the Link Layer Topology service on the laptop and I have tried disabling the "Autotuning level" on one of the Vista machines all to no avail. The laptop in question has XP Media Center on it with no antivirus or firewall software installed. All ping times are good. All of the computers on the network are connected wirelessly except for one of the Vista machines. I've tried connecting the laptop directly to the router with a cable but still no joy. At this point I am stumped.
View 5 Replies
View Related
Sep 3, 2009
On my PC's HDD I have some files encrypted. Used "folder encryption" that is in one of folder properties selected "Encrypt data..." Folder is shown in green in explorer respectively. In the beginning, when I copied any files from this folder to another location (e.g. USB HDD) files became automatically decrypted, i.e. I could read those files from USB HDD on any other PC.
But now something changed. Though I did not make any changes to security or file system settings, files copied from encrypted folder to USB HDD stay encrypted. That is - I can read them only on PC where I copied them to USB HDD. On other PCs where I connect USB HDD files are not accessible. How can I change it back? I need files copied from encrypted folder to USB HDD to decrypt automatically, because it's backup procedure and I need them accessible on any other PC. How can I stop encryption attribute to be copied together with file?
View 6 Replies
View Related
Mar 23, 2008
I try to install an application (Windows Installer), the wizard Installation opens smoothly, but when you start copying Files to disk bypasses the following error: "The system administrator has set policies to prevent this installation" What could be the problem? I have Windows Vista Home Edition and i'm the 'Administrator'!
View 8 Replies
View Related
Mar 24, 2008
I try to send mail from my laptop but it displays this message: a server error occurred and your mail could not be sent (102) when i log on from any other computer it seems to work and let me send mail. i tried restoring my computer and changing browsers but still same error message occurs.
View 8 Replies
View Related
May 3, 2008
i was copying some file and folders to my other hard drive and by mistake I deleted all my documents!!!, and now i do not have any thing in my document folder. I restored my system but i didn't get them back.
View 9 Replies
View Related
Oct 8, 2009
Here are some necessary specifications:
Cable Modem: Arris CM450
Router: Linksys Wireless-G Router WRT54GL (DD-WRT software)
Firmware: DD-WRT v24-sp2 (07/22/09) std - build 12548M NEWD Eko
1TB Lacie NetworkSpace Ethernet drive
Laptop: Acer Aspire 5633WLMi
Windows Vista Home Premium 32-bit + Service Pack 2
802.11 a/b/g Wireless LAN: Intel RPO/Wireless 3945 ABG
The issue:
My 1TB LaCie NetworkSpace is attached to my Linksys WRT54GL router via Ethernet cable.
Whenever I try to copy files from my NetworkSpace over onto my laptop(wirelessy), my cable modem disconnects from the internet and 3 green LEDs start to blink (Power, Online and Cable).
I am left with no internet access.
However, as soon as the file has finished copying my modem reconnects to the internet again. All LEDs go back to their normal state again and I regain access to the internet..........
View 9 Replies
View Related
Mar 23, 2008
I'm building a VB application with installer. Well I want that after the administrator installation it creates a files and folders and if I run that application logged as user I dont want that vista copies my files to VirtualStore folder...I want the same path where all the users can write. I just used the path c:ProgramDataMySoftware... but it doesnt work...VISTA creates another folder under VirtualStore folder.
View 4 Replies
View Related
May 7, 2008
I just migrated from Windows XP Pro to Vista Ultimate (64bit). So far things have run *fairly* smoothly, but I am astonished at the length of time it is taking for me to copy files. For instance I want to copy 1/2 dozen folders from my "D" partition to my "C" partition (drag & drop using Windows Explorer - both partitions are NTFS, and I get the same result copying files on the same partition too). These files existed on my previous XP install, and when I copied them from D to C on XP it took around 2 minutes or so. Now the exact same files are taking upwards of 25+ minutes to copy in Vista! Is there some reason why Vista is acting like a decrepit 90 year old? :-)
View 9 Replies
View Related
Jun 7, 2008
just bought vista home premium 32 bit put the disk in got to drive options formatted HD was going very well until it got to copying files it stopped at 21% then up flashed the blue screen had to manually restart the pc still cant get it going had it for less than 24 hours very very frustrated the shop where i bought the pc from i e-mailed him the problem i was having his e-mail reply was hand it in and i will install vista and all updates for you for
View 5 Replies
View Related
Jul 1, 2008
I can send messages using Earthlink webmail but receive this error msg when I attempt to send using Windows Mail An unknown error has occurred. Subject 'xxxx.....', Account: 'hakxxxx', Server: 'smtpauth.earthlink.net', Protocol: SMTP, Server Response: '550 Your message does not conform to RFC2822 standard', Port: 587, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC69
View 4 Replies
View Related
Jun 19, 2008
I dont think this problem has been posted before. i used to have the same problem with IE7 on XP so i moved to firefox but now if i use firefox on Vista 64, (my current OS) any downloads i do go missing (this seems to be a common problem with no solution). aside from that annoyance i now find that whilst i am browsing using IE7 it all of a sudden decides to disappear. i cant even bloody decribe it. imagine you have 3-4 tabs open in 1 window and whilst your checking something on a website IE7 just decides to close. when you open it you have to load everything again. does anyone know how to get rid of this bug because its happening at least once a day! i only chose Vista 64 due to wanting directx 10 and more then 4gb recognition now im thinking twice, hass it been worth it?!
View 4 Replies
View Related
Feb 22, 2008
When I tried to install a software on Windows Vista 64 bit, I received an error 1603 during installation and installation failed.
It was installed sucessfully on Windows Xp and other versions. Could anyone tell me the reason and solution to this problem?
Do we need some changes in Install Shield?
View 9 Replies
View Related
Jul 4, 2008
I installed IE 8 beta 1 and decided to remove it per MS' instructions. The system reverted to IE7 but now when I launch IE, it crashes with a DEP error. I followed MS' help instructions and added IE7 to the DEP exclusion list. However, IE7 still crashes with the same error. I wanted to reinstall IE7 but I could not find it on MS' web site. - Is IE 7 for Vista available as a separate download?
- Any other suggestions with regards to the DEP error? Note: I have FF3 and Opera 9.5 on my system. I also use AVANT as a front end to IE. The interesting factor is that AVANT works just fine... which I see as odd being that it must have IE to work with.
View 8 Replies
View Related
Apr 29, 2008
I keep getting error message that installation has been interrupted when I try installing above subject softwares. when I tried to install office12 I got below message Error1935 ,97F81AF1-0E47-DC99-A01F-C8B2B9A1E18E ,HRESULT: 0x800736B3.
View 4 Replies
View Related
Sep 21, 2009
Having surveyed numerous similar posts I am at a loss as to how to resolve this issue, hence posting my specifics...all help greatly appreciated.
I am running Vista Home premium, IE8, Firefox 3.5.3, AVG free and Zonealarm. On starting the PC there is no problem connecting to the internet through either browser or updating email (Windows Mail).
Problem...
Loss of internet connection via IE and/or Firefox whilst Mail can still send/receive. I have tried clearing the cache etc but the only thing that works is re-booting the laptop (Dell XPS 1330).
I mainly browse with IE but downloaded Firefox in case IE was the problem. One or the other will lose connection first then the other will follow.
View 9 Replies
View Related
Jun 24, 2008
I had sp1 installed, installed a new video card(Gigabyte 8800GT nforce edition if that helps), had to reinstall the OS before the system would recognize the card. After reboot, I ran update and got a bunch of updates. A few days later, update listed sp1 under automatic updates. i ran the update and got this error:
Code 80070002
I've gotten this error before on another machine and it was pretty easily fixed by deleting a few folders(as per the instructions in the Help guide). This time, it isn't working. I've tried the steps listed at least a Dozen times, I've downloaded the stand-alone update, combined the error fix with a restart, and I always get the same error. Now, my computer is constantly telling me to install the update, but it won't let me. I really don't want to have to reinstall again.
View 9 Replies
View Related
Nov 11, 2009
I've been searching the net for a few days on how to fix this problem, so far useing programs like RegCure doesn't work at all, neither do most of the others.. So I decided to make an account and ask for help. When I try to install Atlas V14 (A program for translations) it comes up with Error 1935 and does a roleback, so i decided to try installing it on my laptop then copied files to PC and it comes up with a side-by-side error.. Im not too good with all the thinking stuff that goes with fixing comps. So if anyone knows how to fix the 1935 error or bypass the side-by-side thing that would help alot.
View 5 Replies
View Related
Mar 30, 2008
i am newbie to this forum.i came to know about this site from my friend. i was looking for a solution for my issue for past 3-4 months for the solution of Installation Problem of MS Office 2007 SP1 Update on Windows Vista Home Premium. please find attached file of windowsupdate.log for the error report.
View 5 Replies
View Related
