Copying Files Stopped And Flashed The Blue Screen
Jun 7, 2008
just bought vista home premium 32 bit put the disk in got to drive options formatted HD was going very well until it got to copying files it stopped at 21% then up flashed the blue screen had to manually restart the pc still cant get it going had it for less than 24 hours very very frustrated the shop where i bought the pc from i e-mailed him the problem i was having his e-mail reply was hand it in and i will install vista and all updates for you for
View 5 Replies
ADVERTISEMENT
Jun 14, 2009
I very recently purchased a Compal KHLB2. I inserted the Vista Ultimate x64 disk and went to work installing it. It goes through the initial process just fine, copying the files, expanding and whatnot. However, after it has to restart it will go to the part where the screen is black with the words "Please wait while Windows sets up your computer...", finally make it past that and then get back to the Installing Windows Vista Ultimate x64 page. It will then stay on Copying Vista Ultimate x64 files for a bit and then blue-screen me. Under Technical Information is tells me 0x00000124.
View 7 Replies
View Related
Apr 23, 2010
I've been trying to reinstall vista for a couple of days now and always get a blue screen at some point when using the newly installed OS. It usually happens immediately after logging in. I've ran CHKDSK several times and it never finds any errors. I've attached several of the dump files
View 5 Replies
View Related
Jun 9, 2008
I was sure to save my files every half hour or so, thinking that that would be enough to not lose my work in the event of a malfunction. However, I pressed save and my entire summary of work simply disappeared! Fair enough. I wouldn't be so angry, but this is the second time it has happened. The first time (on my previous computer), it completely erased 7 weeks of work. So, I got a new computer, and guess what? It has happened again. Not only that, but a BRAND NEW computer has had the blue screen of death twice in the last month. Before it died at 6 months of age, my last computer had the blue screen regularly (at least 3 times a week). This has never happened on any of my other computers before that.
This loss of work has also happened to 2 of my friends. I have also noticed, that
anything that makes the hard drive work hard, also results in blue screen. The only link that I can see between the 2 computers, is vista. I also find, that my computer has to think hard about all the appearance graphics and animations that have been put on Vista to make it look nice. I have simply ditched the niceties and opted for performance, even though my desktop now looks like window 95. What did I get? Blue screen............
View 9 Replies
View Related
Feb 7, 2010
I've seen some other threads, here are the dump files: 'RapidShare: 1-CLICK Web hosting - Easy Filehosting
View 7 Replies
View Related
Apr 2, 2009
I got a blue screen on the 1st day I was up and running with Windows Vista 64 (pre-loaded on my new HP Pavilion computer). Everything was working beautifully, I was very happy that it all went well and I had no major problems getting set up. Then out of the blue, nothing was going on, I went to the START menu and as soon as I touched the Start button it crashed into blue screen.
WHen it restarted I got this message:
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Files that help describe the problem
Mini033109-01.dmp
sysdata.xml
Version.txt
View a temporary copy of these files Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer............
View 9 Replies
View Related
Jun 30, 2008
Business with SP1
Sony laptop, fast core2duo, 4GB
Defender+Avast!
Working beautifully for many months, and then a few
weeks ago this began happening:
Perhaps 2-3 times a week, and with no consistency of circumstances, a blue screen will appear. It might happen while working or when returning from hibernate. There's a countdown as memory is stored, and then a freeze. The only way to recover is to do a hard OFF (5 seconds on the power switch) and restart. When it first happened, I had not installed or changed anything, so I was comfortable doing a restore. It happened again.
It's confusing because the stated cause is inconsistent. I've checked to ensure that all drivers are updated and nothing that's contraVistarian is installed. What analytical steps can I undertake to discover what's causing this, and then to help me make the necessary changes?
View 9 Replies
View Related
Mar 23, 2008
A very frustrating feature of Vista is the inability to copy certain files such as executable files over a network. Any attempt to copy an exe file from the network to an individual computer produces a message that this needs permission but then fails to complete the copy. Is there any way to configure Vista to allow me to copy a exe file form the network to another computer on the network.
View 5 Replies
View Related
Feb 27, 2009
Using Vista Ultimate 64bit We have created a bat file that performs multiple XCOPY commands to copy various files all over the network from key servers and workstations to the local machine into a PGP encrypted drive, drive letter V. So a typcical command might be something like: XCOPY \Server_Nameshare namespecial folder*.* V:Special Folder or XCOPY \Server_Namec$another folder*.* V:Another Folder
The local machine has a user logged in as a Domain Admin The network connection is 1gbit We have tried this bat file many different ways.
1) Manual Backup - by that I mean double clicking the bat file to run, sometimes is done and backs up everything in 8 minutes.
2) Scheduled Backup - task scheduler as domain admin DOMAINAdmin Name running with as high a priv as possible - everything backs up in 21 minutes Same scenarios, manual backup runs in 20 minutes, sometimes the scheduled is 40 minutes The local machine is running AV software - CA etrust - which also runs on an XP machine that does not display this speed behavior. The local machine is running Diskeeper 2009. I do not know if this matters, since the benchmarks are so different in each test. I know VIsta now does indexing of files for searching, could this be creating an issue? We have tried different switch ports, different network cables, verified the gbit.
View 4 Replies
View Related
Apr 9, 2008
Against the advice of all of my colleagues, I am trying to install Vista on a new computer I've assembled. Every single component is supposedly Vista-compatible (in fact, I just upgraded to a $200 video card so Vista would run). But I cannot get past the blue screen of death during the "Expanding Files" stage of installation. Soon after it reaches 1% I get a "System Service Exception" and there's a hexidecimal code below that ends in "3B". I can provide the specs of all the hardware in my system if required. What would you do, short of giving up and just installing XP?
View 7 Replies
View Related
Mar 23, 2008
I have a small network consisting of five machines. Two of the computers have Vista Home Premium installed and the others have various flavors of Windows XP installed. Copying and transferring files works flawlessly between the machines except for one of the Xp laptops which has very poor performance when communicating with either of the Vista machines. I can access this computer from either of the Vista machines and transfer files with no problem. However, if I use this laptop to access the Public folder on either of the Vista machines, the throughput is so slow to the point that Windows Explorer will "hang".
In an effort to solve this problem I have: Installed and run Network Magic on both computers...no problems found. I have installed the Link Layer Topology service on the laptop and I have tried disabling the "Autotuning level" on one of the Vista machines all to no avail. The laptop in question has XP Media Center on it with no antivirus or firewall software installed. All ping times are good. All of the computers on the network are connected wirelessly except for one of the Vista machines. I've tried connecting the laptop directly to the router with a cable but still no joy. At this point I am stumped.
View 5 Replies
View Related
Sep 3, 2009
On my PC's HDD I have some files encrypted. Used "folder encryption" that is in one of folder properties selected "Encrypt data..." Folder is shown in green in explorer respectively. In the beginning, when I copied any files from this folder to another location (e.g. USB HDD) files became automatically decrypted, i.e. I could read those files from USB HDD on any other PC.
But now something changed. Though I did not make any changes to security or file system settings, files copied from encrypted folder to USB HDD stay encrypted. That is - I can read them only on PC where I copied them to USB HDD. On other PCs where I connect USB HDD files are not accessible. How can I change it back? I need files copied from encrypted folder to USB HDD to decrypt automatically, because it's backup procedure and I need them accessible on any other PC. How can I stop encryption attribute to be copied together with file?
View 6 Replies
View Related
Mar 23, 2008
I try to install an application (Windows Installer), the wizard Installation opens smoothly, but when you start copying Files to disk bypasses the following error: "The system administrator has set policies to prevent this installation" What could be the problem? I have Windows Vista Home Edition and i'm the 'Administrator'!
View 8 Replies
View Related
May 3, 2008
i was copying some file and folders to my other hard drive and by mistake I deleted all my documents!!!, and now i do not have any thing in my document folder. I restored my system but i didn't get them back.
View 9 Replies
View Related
Oct 8, 2009
Here are some necessary specifications:
Cable Modem: Arris CM450
Router: Linksys Wireless-G Router WRT54GL (DD-WRT software)
Firmware: DD-WRT v24-sp2 (07/22/09) std - build 12548M NEWD Eko
1TB Lacie NetworkSpace Ethernet drive
Laptop: Acer Aspire 5633WLMi
Windows Vista Home Premium 32-bit + Service Pack 2
802.11 a/b/g Wireless LAN: Intel RPO/Wireless 3945 ABG
The issue:
My 1TB LaCie NetworkSpace is attached to my Linksys WRT54GL router via Ethernet cable.
Whenever I try to copy files from my NetworkSpace over onto my laptop(wirelessy), my cable modem disconnects from the internet and 3 green LEDs start to blink (Power, Online and Cable).
I am left with no internet access.
However, as soon as the file has finished copying my modem reconnects to the internet again. All LEDs go back to their normal state again and I regain access to the internet..........
View 9 Replies
View Related
Mar 23, 2008
I'm building a VB application with installer. Well I want that after the administrator installation it creates a files and folders and if I run that application logged as user I dont want that vista copies my files to VirtualStore folder...I want the same path where all the users can write. I just used the path c:ProgramDataMySoftware... but it doesnt work...VISTA creates another folder under VirtualStore folder.
View 4 Replies
View Related
Mar 23, 2008
I am using a Dell XPS 420. I have been able to transfer files via a private network with no problems until now. I made a share folder with the correct permission. I can transfer any file under 5MB with no errors. If I send a file at 6MB it will process the folder and after 5 min I get this error message:
Network Error... There is a problem accessing C:userpublicetwork testfile name28624.zip.
It says make sure you are connected to the network and try again. Is there a timing issue causing the lost connection? I worked with Dell and since it worked in Jan 08 to reinstall the backup for the Dell Factory settings. I thought I would check with the Windows Vista Community before I do the reinstall. I also have another computer with Windows Vista Ultimate and I can transfer the files with no problem via Hamachi network.
View 4 Replies
View Related
Feb 13, 2009
Problem Blue Screen. No new hardware or software installed recently, last Windows vista update was on 01/15. When I start first, PC passes user registration (boots fine) and
does the normal stuff like loading software and starting the wireless internet connection via Netgear, opening some windows/programms I will close. All normal, but than comes a Blue Screen and very fast shut down of system with restart. Hardly can read the message...Look like Blue Screen appears when to much action is going on like opening of IE and Outlook... or open to many windows... or some bad programm/hardware is booting. But when I restart, restart gives a different blue screens and trouble is much earlier or directly after registering to the system.
But all starting or booting turn slower, real slow now. Start in --safe mode with net working-- the PC works, but the PC can't handle heavy workloads, is really slow in action. I cannot open --My pictures-- to see all picture files displyed on screen (2.7 GB) (the process trying to access the files in safe mode is real slow) and when I attempt to transfer the file to a USB stick, the computer is stopping in middle of action (after 50% transfer)..........
View 9 Replies
View Related
May 7, 2008
I just migrated from Windows XP Pro to Vista Ultimate (64bit). So far things have run *fairly* smoothly, but I am astonished at the length of time it is taking for me to copy files. For instance I want to copy 1/2 dozen folders from my "D" partition to my "C" partition (drag & drop using Windows Explorer - both partitions are NTFS, and I get the same result copying files on the same partition too). These files existed on my previous XP install, and when I copied them from D to C on XP it took around 2 minutes or so. Now the exact same files are taking upwards of 25+ minutes to copy in Vista! Is there some reason why Vista is acting like a decrepit 90 year old? :-)
View 9 Replies
View Related
Jun 5, 2008
I've been doing a clean install of Vista x64 for about a week and have been getting many random blue screens of deaths yesterday I did another clean install and only had about 4 drivers or so installed and I got a BSOD but no dump file was created for some reason so I kept installing more drivers and it work for about 4 hours till it crahsed again this time it gave me a dump file so here are the results.......
View 5 Replies
View Related
Feb 20, 2006
Im having some problems installing vista 5270. It will start the installation, do its first reboot, then when it goes to install the rest, it comes up with an error says: An error occurred whilst copying files. I have tried installing at first the 64-bit version, then the 32-bit version, and still the same error!? I have also tried burning both versions to DVD, and installing them, installing them off a virtual drive by mounting them, extracting all the files to a folder and installing them, and still come up with the same error!!
I have also tried to install it on another machine, but coming up with the same problem?! I got both copies of Vista (32 bit version and 64 bit) from different sources.
View 5 Replies
View Related
Jan 26, 2009
I had the F7 bios, had to update to the F8 because the bios reports the wrong size on 1 TB hard drives. Flashed the bios from the Qbios utility right out of the bios setup screen and all was well. Vista Ultimate set up fine. No errors or problems. As expected Vista is only reporting 3.5 GB of ram. The first thing I did was install the chipset drivers that I downloaded from gigabyte.
Halfway through the install vista started random hangs and froze during the install. Had to kill the power. Used lkg to get back in. Reinstalled the chipset drivers with no trouble. It's been hang up and freeze randomly ever since. Maybe it's the ram issue? Maybe the chipset drivers? Gonna try removing some ram tonight until I can get some windows updates. If I don't do anything the system is fine. I can even browse the web. It seems to act up when I try to install drivers or updates.
View 8 Replies
View Related
Nov 12, 2008
When I start installing it, it goes through the "Copying Files" stage instantly, and then hangs up at 0% on "Expanding Files". Then, anywhere from 10 seconds to 3 minutes later, my screen goes black like it's not receiving a monitor signal anymore, and nothing else happens.
I Googled the problem and found a ton of threads here and elsewhere with the same issue, with a slight variation, but none of them had issues posted, and they were all relatively old.
View 7 Replies
View Related
Feb 1, 2009
I've had voltage issues causing my computer to freeze or reboot during games and dvds. Fixed that and the computer was fine after memtest showing no problems. That was late Dec.
A few days ago, the computer would go to a blue screen saying it's dumping physical memory and then automatically reboots. Thinking my harddisk might be collapsing on me (I have a seagate barracuda 7200.11 500Gb HD with the SD15 firmware, the infamous crash friendly HD), I flash the HD with the SD1A firmware from seagate, then it was fine. 2days later, Catalyst started to cause problems by not responding, so I formated the drive and reinstalled vista ultimate, along with Catalyst, drivers from Mobo manufacturer ASUS, plus a couple of other softwares. That was yesterday, and now I'm getting the same blue screen back, or the computer just freezes.
View 9 Replies
View Related
Feb 16, 2008
I commonly get a blue screen. So how do I solve this problem 2ndly, whenever I play music on my WMP, the computer may just hang on me, giving all but zzzz buzzes and the whole screen shows lines.
View 4 Replies
View Related
Nov 19, 2009
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
View 4 Replies
View Related
Feb 5, 2010
I've had pretty good luck with vista so far but every so often it will blue screen on me and I cant figure out why. The scenario is
1. System startup from power off condition
2. System boots to login screen
3. Blue screen referencing processor timing or something
I have not overclocked or anything everything is vanilla. I would also note that I run hardware diagnostics utilities and it seems fine. Also, I never get the message about abnormal system termination like ususal. How can I get a clue as to what is going on here. So far it seems like the error is bogus, I can log in and the machine will run for days with no problem.
View 5 Replies
View Related
Mar 23, 2008
I am trying to copy files from my usb hard drive: K: to my network external drive Z:
I am trying to copy everything from one to another (files in folders and files that are not in folders)
I tried selecting all and then send to Z:, but it took about six hours to copy about 20 gig (I have about 180 gig to copy)
I read some where that robocopy is a faster and better way to copy files.The thing is I do not know what syntax to use. I was wondering if someone could tell me the syntax I should use to copy EVERYTHING from the usb driveK: to the network drive Z:
View 9 Replies
View Related
Jan 25, 2010
percent user of Vista Ultimate x64 and I have a problem! It gives me this blue screen with this information..................
View 6 Replies
View Related
Jul 3, 2008
I got a new pc yesterday, plugged it all in and after downloading the driver for modem worked fine. Untill it started shutting down and a blue screen appeared. I ran the solution checker and it said it was a problem with the driver to the modem.
View 9 Replies
View Related
Jun 2, 2009
I have a brand new vaio and when I shut it down last night it "hung" - so finally I switched it off at the plug. Today I cannot get anything other than a blue screen.
Should I take the battery out and try and re-install it or is this something that a computer expert will have to sort out. Its such a pain.
View 2 Replies
View Related
