Using Vista Ultimate 64bit We have created a bat file that performs multiple XCOPY commands to copy various files all over the network from key servers and workstations to the local machine into a PGP encrypted drive, drive letter V. So a typcical command might be something like: XCOPY \Server_Nameshare namespecial folder*.* V:Special Folder or XCOPY \Server_Namec$another folder*.* V:Another Folder
The local machine has a user logged in as a Domain Admin The network connection is 1gbit We have tried this bat file many different ways.
1) Manual Backup - by that I mean double clicking the bat file to run, sometimes is done and backs up everything in 8 minutes.
2) Scheduled Backup - task scheduler as domain admin DOMAINAdmin Name running with as high a priv as possible - everything backs up in 21 minutes Same scenarios, manual backup runs in 20 minutes, sometimes the scheduled is 40 minutes The local machine is running AV software - CA etrust - which also runs on an XP machine that does not display this speed behavior. The local machine is running Diskeeper 2009. I do not know if this matters, since the benchmarks are so different in each test. I know VIsta now does indexing of files for searching, could this be creating an issue? We have tried different switch ports, different network cables, verified the gbit.
A very frustrating feature of Vista is the inability to copy certain files such as executable files over a network. Any attempt to copy an exe file from the network to an individual computer produces a message that this needs permission but then fails to complete the copy. Is there any way to configure Vista to allow me to copy a exe file form the network to another computer on the network.
I am using a Dell XPS 420. I have been able to transfer files via a private network with no problems until now. I made a share folder with the correct permission. I can transfer any file under 5MB with no errors. If I send a file at 6MB it will process the folder and after 5 min I get this error message:
Network Error... There is a problem accessing C:userpublicetwork testfile name28624.zip.
It says make sure you are connected to the network and try again. Is there a timing issue causing the lost connection? I worked with Dell and since it worked in Jan 08 to reinstall the backup for the Dell Factory settings. I thought I would check with the Windows Vista Community before I do the reinstall. I also have another computer with Windows Vista Ultimate and I can transfer the files with no problem via Hamachi network.
I have a small network consisting of five machines. Two of the computers have Vista Home Premium installed and the others have various flavors of Windows XP installed. Copying and transferring files works flawlessly between the machines except for one of the Xp laptops which has very poor performance when communicating with either of the Vista machines. I can access this computer from either of the Vista machines and transfer files with no problem. However, if I use this laptop to access the Public folder on either of the Vista machines, the throughput is so slow to the point that Windows Explorer will "hang".
In an effort to solve this problem I have: Installed and run Network Magic on both computers...no problems found. I have installed the Link Layer Topology service on the laptop and I have tried disabling the "Autotuning level" on one of the Vista machines all to no avail. The laptop in question has XP Media Center on it with no antivirus or firewall software installed. All ping times are good. All of the computers on the network are connected wirelessly except for one of the Vista machines. I've tried connecting the laptop directly to the router with a cable but still no joy. At this point I am stumped.
On my PC's HDD I have some files encrypted. Used "folder encryption" that is in one of folder properties selected "Encrypt data..." Folder is shown in green in explorer respectively. In the beginning, when I copied any files from this folder to another location (e.g. USB HDD) files became automatically decrypted, i.e. I could read those files from USB HDD on any other PC.
But now something changed. Though I did not make any changes to security or file system settings, files copied from encrypted folder to USB HDD stay encrypted. That is - I can read them only on PC where I copied them to USB HDD. On other PCs where I connect USB HDD files are not accessible. How can I change it back? I need files copied from encrypted folder to USB HDD to decrypt automatically, because it's backup procedure and I need them accessible on any other PC. How can I stop encryption attribute to be copied together with file?
I try to install an application (Windows Installer), the wizard Installation opens smoothly, but when you start copying Files to disk bypasses the following error: "The system administrator has set policies to prevent this installation" What could be the problem? I have Windows Vista Home Edition and i'm the 'Administrator'!
i was copying some file and folders to my other hard drive and by mistake I deleted all my documents!!!, and now i do not have any thing in my document folder. I restored my system but i didn't get them back.
Laptop: Acer Aspire 5633WLMi Windows Vista Home Premium 32-bit + Service Pack 2 802.11 a/b/g Wireless LAN: Intel RPO/Wireless 3945 ABG
The issue:
My 1TB LaCie NetworkSpace is attached to my Linksys WRT54GL router via Ethernet cable.
Whenever I try to copy files from my NetworkSpace over onto my laptop(wirelessy), my cable modem disconnects from the internet and 3 green LEDs start to blink (Power, Online and Cable).
I am left with no internet access.
However, as soon as the file has finished copying my modem reconnects to the internet again. All LEDs go back to their normal state again and I regain access to the internet..........
I'm building a VB application with installer. Well I want that after the administrator installation it creates a files and folders and if I run that application logged as user I dont want that vista copies my files to VirtualStore folder...I want the same path where all the users can write. I just used the path c:ProgramDataMySoftware... but it doesnt work...VISTA creates another folder under VirtualStore folder.
I very recently purchased a Compal KHLB2. I inserted the Vista Ultimate x64 disk and went to work installing it. It goes through the initial process just fine, copying the files, expanding and whatnot. However, after it has to restart it will go to the part where the screen is black with the words "Please wait while Windows sets up your computer...", finally make it past that and then get back to the Installing Windows Vista Ultimate x64 page. It will then stay on Copying Vista Ultimate x64 files for a bit and then blue-screen me. Under Technical Information is tells me 0x00000124.
I just migrated from Windows XP Pro to Vista Ultimate (64bit). So far things have run *fairly* smoothly, but I am astonished at the length of time it is taking for me to copy files. For instance I want to copy 1/2 dozen folders from my "D" partition to my "C" partition (drag & drop using Windows Explorer - both partitions are NTFS, and I get the same result copying files on the same partition too). These files existed on my previous XP install, and when I copied them from D to C on XP it took around 2 minutes or so. Now the exact same files are taking upwards of 25+ minutes to copy in Vista! Is there some reason why Vista is acting like a decrepit 90 year old? :-)
just bought vista home premium 32 bit put the disk in got to drive options formatted HD was going very well until it got to copying files it stopped at 21% then up flashed the blue screen had to manually restart the pc still cant get it going had it for less than 24 hours very very frustrated the shop where i bought the pc from i e-mailed him the problem i was having his e-mail reply was hand it in and i will install vista and all updates for you for
Im having some problems installing vista 5270. It will start the installation, do its first reboot, then when it goes to install the rest, it comes up with an error says: An error occurred whilst copying files. I have tried installing at first the 64-bit version, then the 32-bit version, and still the same error!? I have also tried burning both versions to DVD, and installing them, installing them off a virtual drive by mounting them, extracting all the files to a folder and installing them, and still come up with the same error!!
I have also tried to install it on another machine, but coming up with the same problem?! I got both copies of Vista (32 bit version and 64 bit) from different sources.
When I start installing it, it goes through the "Copying Files" stage instantly, and then hangs up at 0% on "Expanding Files". Then, anywhere from 10 seconds to 3 minutes later, my screen goes black like it's not receiving a monitor signal anymore, and nothing else happens.
I Googled the problem and found a ton of threads here and elsewhere with the same issue, with a slight variation, but none of them had issues posted, and they were all relatively old.
I am trying to copy files from my usb hard drive: K: to my network external drive Z: I am trying to copy everything from one to another (files in folders and files that are not in folders)
I tried selecting all and then send to Z:, but it took about six hours to copy about 20 gig (I have about 180 gig to copy)
I read some where that robocopy is a faster and better way to copy files.The thing is I do not know what syntax to use. I was wondering if someone could tell me the syntax I should use to copy EVERYTHING from the usb driveK: to the network drive Z:
For my first post I think this one will have you thinking. I have a Laptop running Vista & a PC running XP Media Centre Edition on a small network. The problem is : Both Laptop & pc can see each other in the network. From the pc I can access the shared files on the laptop, no problem. I cannot access any files on the pc when I select the pc in my network I get an error which says " Cannot access \computername. Check the spelling of the name, otherwise there may be a problem with your network. I have attempted pinging the pc from my laptop, but it keeps timing out I can ping my laptop from my pc. I opened a browser on my laptop and entered \ipaddress of the pc . I got an error. pc cannot be found. I did the same \ipaddress of the wireless router. I got an error. cannot be found. I did the same \ipaddress of the laptop. I was able to see all the files on my laptop. If you look at the image, this is my network. when I attempt to access the pc named DB that is when the problem arises.
Have Vista Ultimate on 1 machine and XP Pro on the other. Was able to share files from XP to Vista but not, after all the trying, the other way. About a month ago I becan me unable to share either way. Can see each computer from either one. Have been reading various comments from poeple like me who are in the same boat. Have not had a clear indication on what to do. It seems to me that if Microsoft wants to push Vista then they have to catter to us relatively DUMB ones who are going to buy Vista.
Most poeple want to share their misic etc on their network and with the present layout that is not going to happen. It is alright if you are an IT Tech or System Administrator who has trained for this but the average person is not. Maybe all you Brains could come up with a Wizard to help us Dumb poeple out. Have had Vista from the beginning and have never had control of sharing .
Network fully operational - Public Folder on Vista can be shared on XP - no problem BUT when I attempt to share another folder on Vista it requests username. Options include username on Vista, Guest, Everyone or Add name. It appears that Vista cannot see usernames on XP. Do I have to add these usernames to the Vista computer? I think the 'everyone' option applies only to 'Domains' which are not recognised on XP.
On the desktop side: WinXP Home, all updates etc in place On the laptop side: WinVista Home Premium, all updates etc in place. I have a wireless ADSL router connected by cable to the desktop machine. The laptop connects to the router via a wireless connection. The laptop has full access to everything on the desktop machine. The desktop machine has limited access only to certain folders on the laptop because that's the way Vista is. I have things set up so that from the laptop (Vista) machine I can open, run, copy, move, and delete files on the desktop (XP) machine.
The recycle bins on both machines work properly. If I delete files on the XP side they go to the XP recycle bin and if I delete files on the Vista side they go to the Vista recycle bin. I noticed yesterday however that when I delete XP-side files from the Vista side, they aren't sent to the recycle bins on either machine. This seems very strange. Is it by design? Is there a setting I need to set to have such files sent to a recycle bin? Where do files go when you delete them over a (wireless) network?
Trying to network XP pro with Vista Ultimate. I installed the LLtd Responder patch on XP. When i go to network map on vista I can see the XP machine but can not browse shared files or even click on the icon for it? I can't get the XP machine to see vista. Both have the same workgroup name. What am i doing wrong?
I posted this in general, but it does not appear there so I am posting it here too. I have a desktop PC with VISTA and a laptop with VISTA. The DT is connected to a router via a cable. The laptop is connected to the router via wireless. I have set all permissions that I can find and share wherever I can find. I can't access files on either PC from either PC. I get the message "Windows can not access \Lu-PCC" or what ever folder I try to access. I can get into the folder alled "public", but my files are not in that folder on either PC. The permissions for Lu-PCC is everyone full control, change and read
I have a home office network with one new Dell laptop with Windows Vista Home Basic which I bought a couple of weeks ago, one desktop with Windows XP Pro and one older laptop with Windows XP Pro. The laptops are connected wirelessly, the desktop is using a wired Ethernet connection.
Obviously, there have been never a problem with XP machines. Initially, the Vista machine was also able to connect to everybody else. I didn't even bother to look at the settings because everything worked. Then I went to a business trip, and connected to other networks, including wireless public ones in the airports. When I came back, I was unable to share files or even see other computers on the LAN. The internet connection is working fine though. Oh yes, and I also installed a couple of updates, probably some of those constituting Service Pack 1 as well.
When I checked the network, to my surprise, it turned out that it became "Public" (could this be "guilt by association" - the airport wireless networks are public, so my home network is public, too?). I changed it to "Private". Didn't help. Checked shares, made sure that the users have the same passwords. Ditto. I deleted the history of the airport networks. Still the same.........
my computer doesnt have a wireless network card. It accesses the internet as it is connected to the wireless router with a yellow Ethernet cable. My laptop accesses the internet wirelesses. since my computer is connected to the wireless router, i thought it would be possible to set up a wireless home network to allow files sharing as well as accessing peripherals
on the laptop i went to Start>network>network & sharing center> set up a connection or network>set up a wireless router or access point, click next>click next> message says "Windows detected network hardware but cannot configure it automatically" i clicked the first option> logged on>but all settings were ok nothing wrong
i started everything again then chose the second option> i inserted the USB into the computer but i got a message saying i dont have the wireless network card/software on the computer . why does this matter since its connected to the wireless router
1)Is it possible to set up a wireless home network without buying anything
2)Can i have a really simple set by step guide on how to set this up in Windows Vista Home Premium
Have Vista and Xp Pro computers on network (Workgroup). Am able to see and access files from Vista unit. Can see XP Pro unit but am not able to (Access it) Access Denied. Have setup identical usernames and passwords on both, but am getting nowhere.
There was no problem to see all computers and share files between them. Now new computer FIVE Vista 64 came to Home Network. I see all computers in my Home Network but I cannot open any computers ONE, TWO, and THREE (with Vista 32) from FIVE as well cannot open FIVE from ONE, TWO and THREE. (I am looking for share created files.) Computers ask me for “User Name” and “Password”. So far I never created User Names and Password for any of my computers
I need to copy some dll files to my system32 but vista wont let me. I have tried enabling the administrator account but i keep getting the message that i dont have the rights to perform the action or something. Disabling UAC also didnt help anything. Vista is such a pain in the ass. I know security is a good thing but they also should consider to make it easier to work with it.......
I copied some old jpg photos from a floppy disk and transferred them to a CD since my new computer doesn't have one and not all the photos would open and those that did had a "saw blade" edge to them...large pixels that don't look like that on my old compter. Most of the photos were 40-420mb. Only about 1/3rd would open up and when I tried to open or preview, I got a pop up that said, "Photo gallery can't open this photo or video. The file may be unsupported, damaged or corrupt. I used Nero 6 to do the transfer and never had that problem befofre. Any advise on a solution?
I copied a small file from my XP to a cd to install on new laptop with Vista Home Basic. Everytime I try to run the program on Vista it tells me to insert the cd. Why won't it save the file?
However, I now cannot backup my email. Before I would copy the dbx files and it would take about 10 minutes to do 5gb. Now however - I have 400,000 eml files (I have a lot of email from my web businesses). These eml files are all small. So my problem is that windows first of all takes approx. 2 hours just to calculate the damn size. Then when it eventually starts to copy the files from one location to another (Either on the same RAIDed sata drives, or to another) it estimates days of transfer time left. And I know the calculations are never right, so I left my PC on for 9 hours one night and it wasn't even half way through! It was transferring at 2mb per second! I can upload the data to the internet and back faster than that!
I mean - what the hell? If 98 can do it, me, 2000, xp... what's gone wrong with Vista? So far it's been a pile of junk and it's driving me mad! I'm really trying to like it and make it work, but it's about to be sent back to the shop. So folks - can you tell me why this nonsense? How do i get around it? How can I backup these thousands of tiny files without leaving my PC on for days (I want to do a 10 min backup each day to another sata drive, simple task).
I run the sound system at our church and we record the Sunday services on a CD. I would like to make a copy of the CD on my computer which has Vista Ultimate. Can I make a copy of the CD we have recorded? If so, how?
