When I tried to install a software on Windows Vista 64 bit, I received an error 1603 during installation and installation failed.
It was installed sucessfully on Windows Xp and other versions. Could anyone tell me the reason and solution to this problem?
Do we need some changes in Install Shield?
I installed IE 8 beta 1 and decided to remove it per MS' instructions. The system reverted to IE7 but now when I launch IE, it crashes with a DEP error. I followed MS' help instructions and added IE7 to the DEP exclusion list. However, IE7 still crashes with the same error. I wanted to reinstall IE7 but I could not find it on MS' web site. - Is IE 7 for Vista available as a separate download?
- Any other suggestions with regards to the DEP error? Note: I have FF3 and Opera 9.5 on my system. I also use AVANT as a front end to IE. The interesting factor is that AVANT works just fine... which I see as odd being that it must have IE to work with.
I keep getting error message that installation has been interrupted when I try installing above subject softwares. when I tried to install office12 I got below message Error1935 ,97F81AF1-0E47-DC99-A01F-C8B2B9A1E18E ,HRESULT: 0x800736B3.
View 4 Replies View RelatedI had sp1 installed, installed a new video card(Gigabyte 8800GT nforce edition if that helps), had to reinstall the OS before the system would recognize the card. After reboot, I ran update and got a bunch of updates. A few days later, update listed sp1 under automatic updates. i ran the update and got this error:
Code 80070002
I've gotten this error before on another machine and it was pretty easily fixed by deleting a few folders(as per the instructions in the Help guide). This time, it isn't working. I've tried the steps listed at least a Dozen times, I've downloaded the stand-alone update, combined the error fix with a restart, and I always get the same error. Now, my computer is constantly telling me to install the update, but it won't let me. I really don't want to have to reinstall again.
I've been searching the net for a few days on how to fix this problem, so far useing programs like RegCure doesn't work at all, neither do most of the others.. So I decided to make an account and ask for help. When I try to install Atlas V14 (A program for translations) it comes up with Error 1935 and does a roleback, so i decided to try installing it on my laptop then copied files to PC and it comes up with a side-by-side error.. Im not too good with all the thinking stuff that goes with fixing comps. So if anyone knows how to fix the 1935 error or bypass the side-by-side thing that would help alot.
View 5 Replies View Relatedi am newbie to this forum.i came to know about this site from my friend. i was looking for a solution for my issue for past 3-4 months for the solution of Installation Problem of MS Office 2007 SP1 Update on Windows Vista Home Premium. please find attached file of windowsupdate.log for the error report.
View 5 Replies View RelatedI have a virus and am trying to do a fresh clean install of vista home premium. When I boot from the install disc and run the install program it give me error code 0x80004005 and says that my computer does not have enough free space. It advises me to free up enough space in order to copy files. Problem is I have tons of free space on my hardrive. I have two partitions and both have plenty of free space.
View 8 Replies View RelatedI have a Dell Inspiron 1521 laptop that this past week decided to do a Windows update and afterwards was running at 100% cpu and really slow. After everything I did and everything I knew to do I decided to clean the HD and re-install the OS. I partitioned the HD and tried to install Vista. It got all the way thru to the point it was "suppose" to reboot and ask for my name and comp info and just shut down. When I turned it back on a window popped up saying something to the effect of "windows restared unexpectedly or had an unexpected error please select ok to restart your computer and installation of Windows" so then I have to re-install all over again and it failed again and again. I ran the pre-boot system assessment and found out my HD crashed. I installed a new HD and ran the pre-boot assessment again and everything checks out but I'm still getting the box to pop up cause it keeps turning itself off at the same point as I mentioned above. I can't/ don't know how to get into DOS so I can check the motherboard but I'm getting ready to throw this thing up against the wall.
View 4 Replies View RelatedIm having some problems installing vista 5270. It will start the installation, do its first reboot, then when it goes to install the rest, it comes up with an error says: An error occurred whilst copying files. I have tried installing at first the 64-bit version, then the 32-bit version, and still the same error!? I have also tried burning both versions to DVD, and installing them, installing them off a virtual drive by mounting them, extracting all the files to a folder and installing them, and still come up with the same error!!
I have also tried to install it on another machine, but coming up with the same problem?! I got both copies of Vista (32 bit version and 64 bit) from different sources.
I have installed Vista x32 with SP2 Ultimate. When I installed anti-virus, BSOD came. Same AV version haven't problem with Vista SP1, what is updated to SP2. Then I try to install Vista with SP2 to hyper-v server, but installation stops immediately error screen (STOP: 0x0..8E). Is n_windows_vista_ultimate_sp2_checked_build_x86_dvd_342432.iso packet ok ?
View 9 Replies View RelatedI have tried installing Windows Vista SP1 roughly 8-10 times now, with no luck any time. It always gets to 98% complete on the first stage, then sits there for awhile before reverting, rebooting, and trying again. First time I got error code 0x800F0826, and Microsoft directs me here: Error message when you try to install Windows Vista Service Pack 1: "Installation was not successful" or "An internal error occurred while installing the service pack". None of the resolutions work. Then I got this message a few times 0x800705B4. Which I have read is a "Timed out" error. Its always at 98% on stage 1 of 3 that it hangs up before it fails and reverts................
View 9 Replies View RelatedI get up to the Install button, click it, and then it gives me a message saying "Error 1500, another installation is in progress. You must complete that installation before continuing this one." However, I'm not aware of any other programs that I'm installing.
View 5 Replies View RelatedI am currently trying to install Windows Vista on my computer, but an error keeps the installation from being a success. It tells me of an error labeled "0x8007045D". Currently, There is no working OS installed into the computer and my XP disk won't work also. Is there any way to fix this?
View 5 Replies View RelatedWhen I begin installng physx every thing goes ok, but when it is about to finish. Translating things that is not in english: Error 1935. Error when installing assembly. OR "Error when trying to install assembly" Last LINE: "Contact help and suport for more information"
View 9 Replies View RelatedI am trying to clean install Windows Vista Home Premium 32 bit. If you read my other post, I got around the blue screen about page in non paged area. I got the bad ram stick out and got a new one for my computer. (Toshiba Satillite). And I install it and it goes good until completing installation then it hangs.
View 4 Replies View RelatedAfter months of working fine, suddenly received the following messages: The connection to the server has failed. Subject 'Balance due on account', Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: SMTP, Port: 25, Secure(SSL): Yes, Socket Error: 10061, Error Number: 0x800CCC0E
The connection to the server has failed. Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
Error: 10060, Error Number: 0x800CCC0E
I get this message when sending email. The connection to the server has failed. Subject '', Account: 'mail.comcast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 8 Replies View RelatedThe host 'pop3.aol.com' could not be found. Please verify that you have entered the server name correctly.
Account: 'brendan', Server: 'pop3.aol.com', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D and The host 'stmp.aol.com' could not be found. Please verify that you have entered the server name correctly.
Subject 'brendan paper', Account: 'brendan', Server: 'stmp.aol.com',
Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 11001, Error Number:
0x800CCC0D
A few days ago I saw I had 11 updates ready to be installed. 3 of them were successful 7 were not. The unsuccessful were Office 2007:
KB946974 (Excel)
KB946691 (Office)
KB947801 (Office)
KB950378 (Office)
KB951808 (Office)
KB950114 (Publisher)
KB950113 (Word)
I received an error: Error details: Code 57A. I tried multiple times to install, all with the same error. I did try downloading the update to my desktop, and install with the option "run as administrator...no luck. I am running Windows Vista Home Premium.
Every time I try to run System Restore I get an error message saying that the restore was unsuccessful because of an error. Try again with a different date
View 9 Replies View RelatedI have Ultimate 32 bit that can't be upgraded to 64 bit because it is OEM. Can I leave it installed on one partition and then install Vista Business 64 bit on another partition, running both versions on the same PC? I already have the 64 bit Business which is why I'm asking.
View 9 Replies View RelatedI have a PC which came with Vista Home Premium 32 and I have an upgrade set with both 32 and 64 Ultimate. If I do a clean install of the 64 will I have a problem with activation, I have already activated the 32 install but would format first.
View 5 Replies View RelatedI am currently using Window Vista 32 Home Premium.However,I discovered that certain of my hardware do not have it installer or certain of my program cannot run in Vista,as such,I decided to use back my Winow XP pro.But after insert my Win XP PRO disc and restart my computer,it prompt me something like your "computer is facing some problem which may damaged your computer and need to be shut down". how to reinstalled my WIN XP PRO while my current OS is WIN VISTA HOME PREMIUM 32bit.
View 4 Replies View RelatedWhen I try to install the full Vista SP1 package, I get an error message that the installation failed because "the server returned a referral." I'm a home user not connected to a server so I don't know what this means.
View 4 Replies View RelatedMy PC came with Vista Home Premium 32bit. Since SP1 was released, I've tried several times to install it both through Windows Update and manually but it always fails.I looked at the information in the nowledgebase article about the error message I was getting and it suggested running a system scan utility through the command line interface which I did. The utility said that it fixed some files but I had corrupted files that it was not able to repair.I went out and bought an upgrade version of Vista Home Premium that contained SP1 thinking I could just upgrade it as a workaround. No dice,the upgrade option is disabled unless you already have SP1 installed. It will only let me do a clean install.This brings me to my first question. If I do the clean install, it's going to format my HD right? I'll have to reinstall all my software? My second question is, does anybody know how I can get SP1 to install on my current installation? Any way to find and repair those supposedly corrupt files?
View 4 Replies View RelatedI am currently using Window Vista 32 Home Premium.However,I discovered that certain of my hardware do not have it installer or certain of my program cannot run in Vista,as such,I decided to use back my Winow XP pro.But after insert my Win XP PRO disc and restart my computer,it prompt me something like your "computer is facing some problem which may damaged your computer and need to be shut down". Can anyone pls assist me in how to reinstalled my WIN XP PRO while my current OS is WIN VISTA HOME PREMIUM 32bit.
View 4 Replies View RelatedI have a gateway barebone with P4 @2.8 motherboard and will get a HDD
and some ram. I already have a dell computer with windows Vista on it,
and extra vista dvd that says (for installation only with new Dell
PC).
If I install it on the GATEWAY computer with the new HDD will I have
any problems?
I have just installed Windows Vista, updated to SP1 and put in my FSX Deluxe DVD and the following error message appears: "Error reading initialization file" How do I bypass this to be able to install FSX?
View 9 Replies View RelatedRunning Vista Home Premium with an NVidia 8800 GTX video card. Have SP1 installed but do not have Acceleration. Trying to install SP2 but it won't install. I first tried clicking "Run", and then also tried downloading the patch to the desktop and then running, but it simply will not install...just cancels itself. I disabled McAfee VS before trying to install, but results still the same. Anyone else having this problem? Any ideas how to get this to work? I looked on this board and MS site, and so far have found no other mentions of this problem.
View 9 Replies View RelatedI Just got a new computer and upon first turning it on my daughter accidentally hit the button on my power strip turning the computer off mid-installation. Now when I turn on my computer it looks as if windows is trying to start but goes to a message stating "Windows could not complete the installation. To install windows on this computer, restart the installation." I then click "OK" and it just brings me back to the same message after re-starting. Could anyone please help me get this thing back on track?
View 9 Replies View RelatedI had been running Vista since it came out last year with no compatible issues at all. However, there were several issues with performance and finally late last year I gave up and went back to XP. Now that the SP1 is available, I want to go back and install Vista, but for some reason, my computer won't recognize the disc. It trys, but just can't load it. I've tried other DVDs and have burned a couple and they all work fine. For whatever reason, the problem is with the Vista DVD.
View 9 Replies View Related
