Loading Screen And Does Not Move, Green Loading Bars
Aug 6, 2008
First after doing an ordinary restart, my vista (ultimate) gets stuck for a LONG time at the loading screen and does not move, with the green loading bars. this happens every time i try to restart. i pop in my original vista disk and start the repair process...it says it found something wrong with my startup and it found what was wrong and that it was repaired. after this i get the message NTLDR, which is a whole nother problem. i ran the below to fix the NTLDR...
1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer............
View 6 Replies
ADVERTISEMENT
Oct 15, 2009
A few days ago my display settings would not save and each time I restarted my computer they were different. I thought it would not get any worse however now when i start my computer the screen goes black just after the green loading bar. The computer is still on because it makes hard drive noises and my quickplay buttons are blue but the computer does not respond. It starts in safemode but it won't start normally. I have Vista Home Premium 32 Bit with Service Pack 1. Any help would be greatly appreciated to get rid of this black screen.
View 4 Replies
View Related
Nov 30, 2009
I've recently got attacked by some sort of virus malware and my AVG instantly asked me to reboot. After I rebooted and loaded the green loading bar, my entire screen turned black without the windows badge.When I clicked on the restart button, I'm able to get inside safe mode, network and command prompt but not start windows normally.. I've also tried chkdsk command but it showed 0 bad file.
View 4 Replies
View Related
May 8, 2010
Last night my pc was running fine and just before I went for some shut eye put my pc into sleep mode today I woke my pc only for it not to allow me to log on, mouse movement only nothing was clickable so after a short while I decided to reset upon boot I got the green loading bar but then a black screen after about 20 mins I gave up and tried a restore last good config.... Yeah nice one it bsod on me At 55% chkdsk and now I get a windows boot manager error file: ootcd
I tried Bootrec /RebuildBcd but it brings back an error that it can not create the new file as the file already exists. I'm not having much luck with the recovery disk for repair options as it can't seem to find the OS and brings back errors of can not recover everything seems on a go slow and ubuntu can't find my c drive even tried spin right and that can't recover a bad sector I'm at a loss as to what to do befor the fresh install option I'm on my last option to try use a back up store disk
View 9 Replies
View Related
Jun 8, 2008
New computer. Vista Home Premium. FSX continually stops loading and have to restart the loading process. Six times to get it loaded, but all sytems not functioning. Loaded Accelerator crashed whole system had to do repair of FSX and start over again with continual stoppage. Don't know where to go from here. It worked fine with XP
View 9 Replies
View Related
Jan 18, 2010
I was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies
View Related
Feb 7, 2008
List of Parts:G. Skill 4x2gb DDR2 PC2-8000 ram Intel Quad Core 2.4Ghz cpu Gigabyte GA-X38-DS4 motherboard BFG Tech 8800 GTS (G92) gpu thermaltech toughpower 700w psu Western Digital Caviar WD2500 hd Chi Mei 22" LCD Sound Blaster Audigy SE sound card LiteOn optical drive Problems started today when i tried to turn on my computer, im running Vista Home Premium x64. The loading bar screen would show up and then after that it would go black like usual, but then my monitor would show that there was no input available and the computer would hang in this state forever. Any suggestions? I know a new HD would probably fix it all but im not sure i really want to spend all the money, literally just built this baby 2 weeks ago!
View 7 Replies
View Related
Jun 29, 2008
where it boots up to the loading screen is fine, slows down and stops, then it will bring me to blue screen and restart to the point where it has black screen telling me boot up was unsuccessful, and i can go into all 3 safe modes or boot normally, have tried all of them and non of them even boot
View 6 Replies
View Related
May 1, 2010
My computer is freaking out and i cant figure out why. I try to start it normally and it posts and I see the green loading bar for windows at the bottom of the screen and then the screen goes black. I can load into safemode but that is all. I can not restore sucessfully.
View 9 Replies
View Related
Nov 30, 2008
I have a problem with Vista. When I start my computer, it displays a black screen for a couple of minutes before starting to load Vista. I don't really know what to say more, since I'm totally clueless with this one. What I've tried to do, is to update my drivers. I've also updated my BIOS. What should I try next?
View 9 Replies
View Related
Apr 14, 2010
It boots on the F2 setup screen does several seconds of the loading bar, then my screen says 'no signal' and it goes back to the F2 setup screen and freezes. Then I have to turn of my computer by holding down the power button and start it again the second time where it boots fine.
View 5 Replies
View Related
Apr 25, 2009
RIght now im on the same computer on my BItdefender 2009/Iceweasel.So after i get a black sceen with a cursor that i can move where i want but it just stays like that.I tryed all the safe modes and they dont work at all.Plus i dont have a VistaDVD to make it worse.(My Original OS was Windows Vista Home Premium x32)I really dont know where the command prompt is on iceweasel but i know how to use it in vista.
View 7 Replies
View Related
Feb 22, 2009
For about 1-2 years my computer ran fine until recently. Now, whenever I start up my computer it boots all the way to the Vista loading screen, seems as if it loads all the way, then shuts down with no warning. This happens at the same point every time. I tried putting in the Vista DVD and starting that up in an attempt to reinstall or repair Vista, but I get the same results on the same loading screen. The computer is custom built by myself.
Specs:
AMD 64 X2 4800+ 2.4GHZ
ECS GeFORCE 6100SM-M mobo
BFG Nvidia 8800 GTX
OCZ PC6400 2GB 800MHZ (Dual Channel)
Maxtor 160GB 7200 RPM HDD
Coolmax 600W CXI-600B PSU
(Everything is using stock settings)
View 7 Replies
View Related
Nov 17, 2009
The next time it started, the graphics were all screwed up and when it gets to thebit after the Windows Loading Bar it goes to a Blue Screen of Death. The computer then restarts and the same thing keeps happening. I tried running the computer in Safe Mode but it doesnt work either :/ neither do any of the other Advanced Options.
View 9 Replies
View Related
Jun 11, 2006
I reboot the computer, boot from DVD.
I get the screen that says "Windows is loading files", and then I get the screen with the loading bar at the bottom (the one that looks a bit like the standard Windows XP loading bar) and then the screen goes black and nothing happens. I've tried leaving it for a good half hour, still to no avail.
View 9 Replies
View Related
Jun 27, 2008
Iv just bought a new PC, I put the vista CD in the drive and power up the computer. A screen appears saying "windows is loading files" and a bar that slowly fills up.Once the bar is full (suggesting all the files have been loaded), a new bar appears with microsoft corporation written underneath it.From looking at online install guides it appears that there should be a moving green block within this new bar however, it is completely empty and nothing happens. I have tried to install several times and left it for 40 mins or so each time, but i keep getting the same problem - i get to that stage and it seems the install freezes.
View 7 Replies
View Related
Jun 7, 2009
I cannot always load windows Vista Home in normal mode.
I did a log and it seems to hang here:
Did not load driver @nettun.inf,%6to4mp.displayname%;Microsoft 6to4 Adapter
There are a number of these listed.
I can boot into safe mode, I have run a registry check using regcure, but no joy. I still cannot boot into normal mode, it just gets to the bar going accross and nothing happens.
I have SP1 installed.
The problem appeared to occur after trying to upgrade AVG Antivirus, but I removed this, cleaned out all entries pertaining to AVG in Registry, but this did not solve the problem.
View 9 Replies
View Related
Aug 24, 2008
I’ve removed all my external hardware, usb devices, printers etc… Expect the monitor, mouse and monitor.
I’m at a loss this problem started small freezing every once and while(I leave my computer on all the time) now I can’t get more then a minute or 2 into the desktop.
I’ve tried a lot of stuff and am hoping for further insight.
Specs.
Vista Home Premium 32bit
HP Pavilion a1357c
AMD64 x 2 4200 2.2ghz
3 g ram
Nvidia Geforce 8600 GT 512
View 9 Replies
View Related
Jan 11, 2010
I have a pc with windows xp media centre edition, running flight simmulator.. I installed the accelerator kit on it.. now its not starting up...getting blue screen saying either "uninstall your antivirus program or driver" I can not load it to safe mode to do that, I have run the repair from the recovery system still no luck.
View 6 Replies
View Related
Apr 9, 2010
Everytime i switch on my PC, it loads perfectly well but afterwards there are some pop ups windows which says:
1. Could not load or run 'c:usersmyNameLocal' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying. 2. Could not load or run 'settingapplication' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying 3.Could not load or run 'Dataasdlfj3service.exe' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying
4.Windows Defender window pops up saying: application failed to nitialize:0x80070006.The handle is invalid Even if you go to the Accesssories then System Information you get: Windows cannot find C:windowssystem32msinfo32.exe.Make sure you typed the name correctly and try again. The same thing happens when you go to Accessories, then command promt you get windows cannot find c:windowssystem32cmd.exe.
View 5 Replies
View Related
Aug 26, 2008
a friend pointed this out to me as a great program to use. I download it..and it doesn't work. They don't have an official Vista build yet, but they have a page that tells you how to work around it. I think I've done everything right, main thing is that Vista's driver signature stops it, b/c Phoenix Labs hasn't purchased one yet, so I disable that and all should work fine, but I get a failed file error instead. I assume it's from a corrupt file, when downloading, but I've tried several downloads and nothing worked. So anyone have any ideas on how to get it working, or anyone have a program that works the same as PG?
View 6 Replies
View Related
Mar 28, 2009
i got The Elder Scrolls Oblivion game of the year edition, a few weeks ago and have been having problems installing on my computer since. I put the disk in and nothing happens, the computer does not read it. when i go into computer and double click the dvd drive it should be in, a message appears asking me to insert the disk. I bought this computer from pc world around two months ago. my computer runs 64bit vista im wondering if this could be the problem? or could it be my graphics card has not got the performance to play the game therefor my computer does not run it. iv done a restore of where i turn everything off in the background to see if the disk will be read, and the same old thing happens.
iv been wanting to play this game for a year or so now and cannot seem to fix the problem. iv spoked to the oblivion technical help service and they still cannot conclude the problem. also i rang pc world up and they told me to try to speek to the game designers and ask of a patch or online download where by i can download straight to my computer. i so far cannot find any patch or download to take from oblivions site, and have not found the number to get in contact with the game designers.
View 5 Replies
View Related
Feb 24, 2010
i have a vista home premium with a 138GB HD (82GB full, 56GB free) on an HP pavillion computer. my computer is about 2-3years old.
1) how long does it take to defragmentation for the 1st time? the last time i did it (and the 1st time, with all the info above, my computer didn't finish even after 12hrs+. unfortunately, defragmentation does not have some loading bar, so i could not tell if the thing just stopped or it was just taking a super long time.)
2) also, when i did defragmentation for the 1st time, my computer started losing free space! what's going on?
View 8 Replies
View Related
Apr 30, 2008
I have not downloaded yet too afraid.has anyone actually seen any improvements after loading sp1
View 4 Replies
View Related
Sep 25, 2008
Suddenly my labtop with vista primum and ie7 browser loading pages but missing the fotos and images !! i click refresh some fotos reappear and others dont I have't done or add anything to my comp what would be the problem ??
View 3 Replies
View Related
Jan 20, 2009
I have been unable to load and use itunes because of a DEP message that pops up on screen shutting down the program.
I have done the following:
*uninstalled the programs itunes and quicktime
*uninstalled the programs completely using Crogram files - the additional way of uninstalling.
* reinstalled/uninstalled both programs about 4 times
* reinstalled quicktime as a stand alone program
* used Windows installer clean up
I can't turn DEP off by selecting itunes and putting into the marked exception box because an error message tells me that itunes MUST operate with DEP. It will not drag it into the box.
View 9 Replies
View Related
Jan 15, 2010
When I start the PC, after the loading bar for Microsoft thing finishes,instead of going to login screen it gives me a blue screen, and it says Page_fault_in_nonpaged_area.
View 9 Replies
View Related
Oct 5, 2009
I've tried everything to fix my Dell Inspiron 1545 running Windows Vista Home Premium 32bit and I can't seem to work out what to do anymore. My laptop automatically did some updates earlier today and I rebooted as advised, unfortunately it failed to load up at all and I got a screen telling me windows has failed to start. Problem could be due to a recent change of hardware or software. The only recent change being the updates. I've tried to do a system repair, which hasn't worked. All it does is load a blank screen with, eventually a movable mouse cursor, nothing else happens after. I've tried to load from the boot cd also, but I have the same problem.
The white bar loads, message saying windows is loading files then as soon as its passed the blank screen and mouse cursor come up. I can't load anything in safe mode as it just comes up with the windows failed to start message. I'm at a loss, I think. And if I can't reinstall windows then it looks like my laptop is messed up completely. All I haven't tried is perhaps loading safe mode with command prompt and trying to do a system restore, and Repair Install For Vista this, which I'm not quite sure I understand fully. I might have had SP1 installed already. Anyone got anything they can chuck my way to advise me to do? I haven't had the laptop all THAT long.
View 9 Replies
View Related
Feb 12, 2008
When i start up my vista has problems loading things and can pause. Yet sometimes it lets you log on, but when you log after 20 seconds it can freeze(but the arrow moves around the screen). I can get on safe mode perfectly(I am using now). This is the second time it happened, and the 1st time i had to format, and i am not willing to do that again.
View 9 Replies
View Related
Jun 23, 2008
This isn't a big deal but it can be quite irritating. I have a brand new machine with Windows Vista Business running on it. This is the main machine in the study and has a Belkin router connected to it via a cat5 cable. The rest of the PCS/Laptops in the house run from the routers wireless. Everything is set up and internet explorer loads automatically on each machine.
However, on this newer machine, when I click on Internet Explorer, it takes around 8-10 seconds to load the homepage, i.e google. On all of the other machines, its pretty much instant. The other machines are running XP/Vista Home and Vista Basic. They all load the webpage instantly................
View 5 Replies
View Related
Oct 22, 2009
I scan my computer and remove the malware that I had. Now when I start the computer I get a message that RUNDLL loading is a error. I get that it cant load C:userappdatalocalloweppyrpl.dll wont load. I can find anything to fix it.
View 6 Replies
View Related
