Windows Not Loading Due To Updates
Oct 5, 2009
I've tried everything to fix my Dell Inspiron 1545 running Windows Vista Home Premium 32bit and I can't seem to work out what to do anymore. My laptop automatically did some updates earlier today and I rebooted as advised, unfortunately it failed to load up at all and I got a screen telling me windows has failed to start. Problem could be due to a recent change of hardware or software. The only recent change being the updates. I've tried to do a system repair, which hasn't worked. All it does is load a blank screen with, eventually a movable mouse cursor, nothing else happens after. I've tried to load from the boot cd also, but I have the same problem.
The white bar loads, message saying windows is loading files then as soon as its passed the blank screen and mouse cursor come up. I can't load anything in safe mode as it just comes up with the windows failed to start message. I'm at a loss, I think. And if I can't reinstall windows then it looks like my laptop is messed up completely. All I haven't tried is perhaps loading safe mode with command prompt and trying to do a system restore, and Repair Install For Vista this, which I'm not quite sure I understand fully. I might have had SP1 installed already. Anyone got anything they can chuck my way to advise me to do? I haven't had the laptop all THAT long.
View 9 Replies
ADVERTISEMENT
Jun 8, 2008
New computer. Vista Home Premium. FSX continually stops loading and have to restart the loading process. Six times to get it loaded, but all sytems not functioning. Loaded Accelerator crashed whole system had to do repair of FSX and start over again with continual stoppage. Don't know where to go from here. It worked fine with XP
View 9 Replies
View Related
Aug 6, 2008
First after doing an ordinary restart, my vista (ultimate) gets stuck for a LONG time at the loading screen and does not move, with the green loading bars. this happens every time i try to restart. i pop in my original vista disk and start the repair process...it says it found something wrong with my startup and it found what was wrong and that it was repaired. after this i get the message NTLDR, which is a whole nother problem. i ran the below to fix the NTLDR...
1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer............
View 6 Replies
View Related
Jan 11, 2010
I have a pc with windows xp media centre edition, running flight simmulator.. I installed the accelerator kit on it.. now its not starting up...getting blue screen saying either "uninstall your antivirus program or driver" I can not load it to safe mode to do that, I have run the repair from the recovery system still no luck.
View 6 Replies
View Related
Aug 10, 2009
When I click on Windows Update, it just hangs with the circle cursor spinning. All that opens up is a white box, and nothing happens. I had no issues running Update 2 days ago. It just started this yesterday out of the blue. IDK if it is related, but I also can't update drivers in Device Mgr. It just keeps searching the web for drivers, and nothing ever happens.
View 5 Replies
View Related
Nov 30, 2008
I have a problem with Vista. When I start my computer, it displays a black screen for a couple of minutes before starting to load Vista. I don't really know what to say more, since I'm totally clueless with this one. What I've tried to do, is to update my drivers. I've also updated my BIOS. What should I try next?
View 9 Replies
View Related
Mar 19, 2008
I want it to run Windows Vista 32-Bit Edition. I had Linux Ubuntu 6.06 LTS, now I erased the linux partition and format the disk with a utility called Dban. I had to make a bootable CD in order to format it. When the disk was in blank I inserted the Windows Vista DVD and the screen said "Windows is loading files" then the progress bar of Windows Vista appears however it stops. I waited there 1 hour, but nothing happened so i thought it was because I didn't format it to NTFS. Then I used GParted to format it to NTFS. I tried again, however it gave me the same results.
View 5 Replies
View Related
Jun 1, 2010
It's ticked in msconfig - Startup, but never loads Alert each time loaded manually and 'Turned-On' but never loads on reboot
View 7 Replies
View Related
Dec 20, 2007
After powering on the computer, it literally takes 10-15 minutes to start loading windows. Once windows starts loading, everything is fine, and the computer runs beautifully. I'm thinking this has something to do with the bios, but don't know where to start. Once again, the computer stalls before windows even begins to load.
View 7 Replies
View Related
Jan 7, 2010
I haven't been able to start Windows past the green loading bar. The first couple of days when I tried to turn on the computer it would take me to an 'Error Start Up' screen where I would try to restart using safe mode or something.
Now though, it does the blue HP screen, then goes black with a grey loading bar that says "Loading Files" and then from there it goes to the green loading bar. This has happened to me once before, although, it was fixed in just a couple of days. I removed the main power cord and left it out for a day and when I tried again, it worked. I've tried doing that now, but no such luck......
View 7 Replies
View Related
Nov 17, 2009
The next time it started, the graphics were all screwed up and when it gets to thebit after the Windows Loading Bar it goes to a Blue Screen of Death. The computer then restarts and the same thing keeps happening. I tried running the computer in Safe Mode but it doesnt work either :/ neither do any of the other Advanced Options.
View 9 Replies
View Related
Aug 31, 2009
when I had to open Internet Explorer (I use Mozilla) to access my school email account. Everything went fine and when I was done I reopened Mozilla to browse again. I got one of those annoying spam web popups saying I had a computer infection and clicked out of it. A few minutes later my pc just randomly rebooted. I have had viruses before but it has never shut down randomly before. So I immediately restarted in safemode and ran my spyware tools. I found 3 trojans (I no longer remember their names) and removed them. I rebooted and it starts to load windows but reboots before it reaches the user account screen. I can get into safe mode and I did run my spyware tools again, they didn't find anything at all. I figured I had somehow damaged my system and so I downloaded a windows repair disc and repairedit. It didn't work. I've run startup repair and that didn't work or find anything wrong either.
View 6 Replies
View Related
Aug 28, 2009
I am currently using my Dell Inspiron in safe mode as I cannot use it in normal mode without freezing soon after loading. For some reason, the Ms Help page says there is a prob with my Product ID so I can't get help there unless I pay for it. I have just had Service Pack 2 installed but the problem started before that upgrade. Also, in device manager, under Network Adaptors, I have 6TO4 adapters 'unable to start' and also ISATAP adapters similarly unable to start. Would these events be the cause of the freezing? I don't have more than 1 anti-virus running.
View 5 Replies
View Related
May 27, 2009
Recently one of my hard drives underwent a bizarre process where it decided to revert back to RAW. After 4 days of problem solving I finally fixed the drives but also purchased 2 new/better drives. I run a RAID-0 Striping set-up. I have done every trick in the book to decrease the excess fluff from running in the background of windows vista but I still get delayed loading times. If I right click to attempt to create a folder or something such as that, the circular loading icon appears as it takes 2-3 seconds to open. And it does this with most everything, some things take longer than others.
I only ask what could be the cause of this because this never happened with my former drives or vista for the past year, it only started after the one hard drive crashed and it has done it since the fix and since the installation of the new drives. Everything use to open practically instantaneously....My only assumption is that there is something trying to load but I have tried disabling everything and it still does the same thing.
View 6 Replies
View Related
Apr 26, 2009
When I switch my laptop on, I get the following message: "WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE...". I then have the option to launch system repair or start windows normally. Either choice I make has the same consequences...a screen launches saying "loading windows files" Then I am taken to windows loading screen with little green bar. Then the screen goes black. Not off, just black. If I try and do a system recovery, I go through the same steps via f11 but then I get the 'blue screen'. I didn't create the boot disks that one is supposed to do when they get vista.
View 7 Replies
View Related
Aug 19, 2008
I'm running Windows Vista Home Premium 64-bit edition Dutch Version, updated with SP1 and all the patches/updates until today. However, I have encountered two problems lately, that might be related. During one of the last Windows update sessions, one of the recommended updates was KB940157: Windows Search 4.0 for Windows Vista for x64-systems (11,8MB).
The update downloaded succesfully, created a restore point, but then during installation of Search 4.0, windows update stops and announces an update fail error:
Failed: 1 update
Errorcode: 800F0900
I've been googling this particular error code in combination with KB940157, but it doesn't bring up any entries. Then later on, I discovered that when I go into the Windows Components window (via Control Panel, Add/remove software), the entire windows stays blank (first it says "Wait a few moments..."). This only lasts a few seconds then shows a complete empty window.
View 9 Replies
View Related
Oct 27, 2009
I can get the good old Windows Update interface back, somehow the interface as changed for something that is less usefull and easy to find what update I need to do or not.
View 9 Replies
View Related
Apr 7, 2009
Just wondering why anyone would turn OFF the Windows automatic updates? The
update options give the user that choice and I just don't see why anyone
would choose that. Isnt the whole idea of automatic updates to keep your PC
up to date with important Microsoft information?
View 9 Replies
View Related
Nov 16, 2009
i installed service pack 2 and other updates on this computer and now when i log into the computer the vista sound freezes and it will do a memory dump. It did this twice one at boot up and installing updates. I have never had any problem like this before and i'll put all the information about the error and the computer i am using.
Computer Error "Windows has recovered from an unexpected shutdown".............
View 6 Replies
View Related
Mar 11, 2010
Desktop PC will be one year next month. I did not renew the Microsoft Office after trial period that came as a package w/ no future intention of acquiring it. I'm using the free Open Office program - word processing mostly at this time. Is there anything in the list below that is of importance? I only have a basic PC with DVD player for movies, etc. No scanner, printer or fax. Not even external hard drive or usb flash drive. Otherwise, I understand that I can just choose to hide the updates, so it will not keep reminding me. Also, I choose to keep my OS w/ Srvce pk 1 and MS IE version 7 for as long as I'll be able to. I had too many probs with Srvce pk 2 and MS IE version 8. Your opinion, if any, is welcome.......
View 9 Replies
View Related
May 15, 2010
1. When updating Windows, I get "Some Updates not installed". Errors found: CODE 800B0100.
When I view update history when trying to install KB982536, I get the information - Microsoft.NET Framework 3.5 SP1, Windows Vista SP2 Failed.
2. I also get on Startup - "Error loading C:users.......CNMSS" Specified module could not be found.
The ribbon at base of screen states "Run DLL"
Are these two problems connected? ...
View 3 Replies
View Related
Jan 29, 2009
My windows update is unable to check for updates, an whenever I manually check for updates, Install now shows up, once the installation process begins, a couple of minutes go by and windows returns to checking for updates, and I am right back to Check for updates for your computer. I've checked the history, and so far KB948610 has failed 4 times, and KB953733 once in the past (windows apparently never tried again).
View 9 Replies
View Related
Dec 16, 2009
I work as a computer repair technician on a college campus and had a question about windows updates. A little background, we do anywhere from 1 to 10 Vista installs a day, any version, mostly 32bit. We do have a program that will automatically install the OS for us and even some programs that we preconfigured. Pretty much we just enter the key and come back when the desktop appears. The install already contains SP1 and SP2. The problem comes when we go to update Vista, it takes FOREVER it seems like.
So my question is, is there any harm in downloading the Vista updates as standalone and having our Installer Program install them when the OS finishes installing. Is there a certain order that they have to be installed in? I also noticed that the Windows Update program installs some updates, has you restart, and then installs some more updates, and restart again. Would we have to restart in between update installs?
I've searched this forum and all over google and the only thing i can find is slipstreaming SP1 and SP2. We are just trying to make the install process faster so we can return the student computers back to them.
View 8 Replies
View Related
Jul 2, 2009
windows updated, now when it restarts it keeps coming up with "Configuring updates" stage 3 of 3 0% Do not turn Off, its done this for many times. how to skip this stage when starting windows
View 8 Replies
View Related
Nov 17, 2009
Is Vista SP1 necessary or recommandable before upgrading to Windows 7? Many people these days is upgrading from Windows Vista preinstalled on the PC to Windows 7. In case of a complete recovery it's necessary to reinstall Windows Vista and then upgrade to Windows 7 (if you have bought an upgrade and not a complete Windows 7 version).
Yesterday I did a complete recovery and did a reinstallation of Vista Premium. After installation of Windows Vista I have so far done approximately 100 Windows Vista updates and is now continuing with SP1.
I have a Windows7 upgrade and plan to upgrade Windows Vista to Windows 7. Could I had saved time upgrading directly from Windows Vista in the original edition without all the other updates before upgrading to Windows 7, or was, and is it correct to take this detour?
View 5 Replies
View Related
Aug 14, 2008
i've trying to update my vista home premium for the past 3 - 4 days and they have all been failing.
View 6 Replies
View Related
Oct 8, 2009
The initial configurations done as per the setup and wizard instructions provided by hp. After some time, suddenly the system performace was too slow and it has given me a huge shock and made me think like i've wasted my money! BUT after installed the windows updates, it's performance increased tremendously. There is always the alert which shows install Windows updates. Even when i tried to shutdown the system, it pops up 'Install Updates and shut down'.
So i've installed the updates almost every day otherwise it will not allow me to perform any operations. Is this expected behaviour? Can't we work without installing any windows updates atleast for a month? I am afraid may be some performance issue on this model! Due to these every day installation of windows updates, its killing my hard drive like anything.. Intially, in C drive, the free space was 243 GB of 260GB, now its reduced to 225GB of 260GB. I am loosing my memory because of this updates.
View 5 Replies
View Related
Sep 10, 2008
Wondering if you guys can offer up some good advice. I have had my pcfor about 8 months, all was working fine until a couple of months ago when after some automatic updates and a reboot, windows failed to load. I got a black screen with the following message
file name : NTOSKRNL.exe
status : 0XC0000098
Windows failed to load because a required file is missing or corrupt: Then it advised me to reboot from the cd and repair the program. Which i did, and then instantly turned off automatic updates, as i didnt want to risk the same thing happening again. And it seemed to be working fine, for about 2 months i guess............
View 5 Replies
View Related
Apr 30, 2008
Will I still get Windows Updates if I don't install the Service packs for Vista & XP? If that happens won't my system be obsolete? remove "nospam" in order to email me.
View 4 Replies
View Related
Jan 21, 2010
My computer continually starts up with the icon "windows can't check for updates", I have tried disabling/enabling Windows Firewall many times and re-trying the installation but nothing works.
View 4 Replies
View Related
Jul 15, 2009
I received 4 updates today and all 4 installed however one update KB961371 showed error 800703F9. While configuring updates it would show Stage 1 of 3-0%complete. Then it would show updates not configured propertly. I tried this several time, same results. I did a system restore and then tried installing only the security update, same results. After this I reinstalled the other 3 update with no problem. This is the first time I have had a update not to install. I am using AVG Internet Security 8.5 version, however I don't think this is the problem as I have received over 130 windows updates inthe past. I do have windows set to install updates automatically every day. I have contacted MS with this information but have not received a answer. To tell the truth I trust the forum more. I look up some information and this update applies to 2008 windows server Itanium-based system. I have a HP Pavilion s3120n with AMD 64 live processor.
View 4 Replies
View Related
