Windows Failed To Start "loading Windows Files"

Apr 26, 2009

When I switch my laptop on, I get the following message: "WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE...". I then have the option to launch system repair or start windows normally. Either choice I make has the same consequences...a screen launches saying "loading windows files" Then I am taken to windows loading screen with little green bar. Then the screen goes black. Not off, just black. If I try and do a system recovery, I go through the same steps via f11 but then I get the 'blue screen'. I didn't create the boot disks that one is supposed to do when they get vista.

View 7 Replies


ADVERTISEMENT

Windows Is Loading Files Stoped

Mar 19, 2008

I want it to run Windows Vista 32-Bit Edition. I had Linux Ubuntu 6.06 LTS, now I erased the linux partition and format the disk with a utility called Dban. I had to make a bootable CD in order to format it. When the disk was in blank I inserted the Windows Vista DVD and the screen said "Windows is loading files" then the progress bar of Windows Vista appears however it stops. I waited there 1 hour, but nothing happened so i thought it was because I didn't format it to NTFS. Then I used GParted to format it to NTFS. I tried again, however it gave me the same results.

View 5 Replies View Related

Windows Failed To Start.

Mar 24, 2008

My computer was working properly,then I had a power problem, my computer turned off and turned on again.Now my windows doesn't open. When I try to open I receive this message: Windows failed to start. File:windowssystem32configsystem Status:0xc000014c Info:Windows failed to load because the system registry file is missing or corrupted. fix it without losing my files.I have a restore cd, but I dont want to use it, because I can't lose my files.The cd doesnt has the choice to repair windows.Just restore it. I am using Windows vista premium and my computer is Aspire E380 (Acer) It has C: and D: partition, but I dont know if it is 32 or 64 I already use all steps in F8 screen, safe mode....last configuration...anything didn't work.

View 7 Replies View Related

Repair: Windows Failed To Start

Dec 19, 2009

I have a dell 1525 running vista home premium 32bit. Just a few minutes ago I was transfering music from my hard drive to my external hard drive, while on the internet looking at videos. I noticed that the file transfer process was taking a while so i decided to cancel the process. Some error message popped up after a while, being stupid I didn't write them down and kept watching my videos. My desktop disappeared and i cou;dn't start task manager so i decided to restart my computer... When I restarted I was greeted with "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"


It also gives me the following options:

4. Safe Mode
5. Safe Mode with networking
6. Safe Mode with Command Prompt
7. Last known good configuration
8. Start Windows normally

When I restart booting from the reinstall dvd from dell and i get to the repair my computer part, vista isn't listed in the options to repair. And I can't browse my main hard drive. Also when I start into safe mode, all the driver load then I get a quick flash of a blue screen which says(i video tapped it then slowed it down to read the message): A problem has been detected and windows[COLOR=#05408F ! important][COLOR=#05408F ! important][/COLOR][/COLOR] has been shut down to prevent damage to your computer.........

View 9 Replies View Related

Installation: Windows Failed To Start

Aug 19, 2008

I have OEM version of windows vista 64 home premium. Installation goes normally but when computer reboots first time it shows an error message. Repair doesnot work, have formatted harddrive and tried to instal it couple of times but it still shows error. Windows failed to start. A recent hardware or software change might be the cause. File: windowssystem32driversvolsnap.sys status:0xc0000221 Info: Windows failed to load because a critical system driver is missing, orcorrupt.

View 6 Replies View Related

Windows Failed To Start, System Restore

Dec 29, 2008

My laptop (Advent 8117 running Vista if that helps) has been working fine, then this morning things went pear-shaped. To begin with things worked as usual - Everything seemed to load up as normal, I left the room for maybe 5-10 minutes and when I returned there was a black screen. I waited a while and nothing happened so I restarted. It comes up with 'Windows failed to start. A recent hardware or software change might be the cause.' From there I can either start normally or run a repair. It doesn't seem to matter what I click here because I get a 'Techguys' support thing come up either way but now nothing on it works. To begin with I ran the Repair Environment, but it couldn't fix it. I also got to try a System Restore but I seem to have no points to restore to. Now I can't get the Techguys page to do anything. So I tried running in Safe Mode but once again I'm faced with the unmoving Techguys page, and the same goes for when I try and load from the Last Know Good Configuration. I desperatly don't want to have to lose everything.

View 9 Replies View Related

Windows Failed To Start, Status: 0xc00000e9

May 2, 2008

I am building a brand new system and bit the bullet and am attempting to install Vista Ultimate 64 with SP1 (Brand Spanking New DVD with SP1 on it). Everything boots up just fine, memory is okay (4 Gb), install runs fine and after the reboot, I get the following: File: Windowssystem32toskrnl.exe

Status: 0xc00000e9

Info: Windows failed to load because the kernel is missing, or corrupt. (I purchased all parts and software from Newegg) When I go to the MS Support site and put in the Product Key, it tells me that it's in an invalid format. 5 - 5 - 5 - etc is what I have, however, Microsoft is wanting 5 - 3 - 5 -etc. format. I have pulled out EVERYTHING and disconnected EVERYTHING except the DVD, HD, and vid card, so I'm running it as barebones as I can.

View 9 Replies View Related

Windows Failed To Start: Status: 0xc000000f

Jul 5, 2009

I recently restarted my computer and the following error message appeared. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Instert your windows installation disk and resart your computer.
2. Choose your language settings and then click "Next."
3. Click "Repair your computer."

If you don not have this disk, contact your system administrator or computer manufacturer for assistance.

File: BootBcd

Status: 0xc000000f

Info: An error occurred while attempting to read the boot configuration data.

I have followed all the instructions to no avail. I also entered the command eature and attempted to rebulid the bcd but it gives the error message "the requested system device cannot be found." I have a lot information on the hard drive so i would really like to be able to fix it without loosing any of the information.

View 9 Replies View Related

Windows () Failed To Start, Status: 0xc000000f

Apr 27, 2009

Tried to restore to my Toshiba Equium laptop to factory settings. It started to format the disk and then Blue screened. Now it wont even boot. Error message I get is :- "windows failed to start........" File windowssystem32winload.exe status: 0xc000000f

I dont have a Vista disk (never had one) so downloaded the Vista boot repair disk. Tried the repair option on here and fixboot from the command line but still no joy.

View 9 Replies View Related

Windows Boot Manager Failed To Start

Jun 11, 2009

It says something in relationship with these words. Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: boot_file Status: 0xc0000225 Info: Unexpected error has occured

View 5 Replies View Related

Windows Failed To Start: Bootmbr Missing

Jun 18, 2008

I boot up my computer today and up pops a message about my bootmbr being missing. I, figuring this was quite bad, stuck in the ol' vista installation disk to run a startup repair. It does its thing, says its successful and tells me to reboot. I do, and get a new message at startup, saying,"Windows failed to start. A recent hardware or software change might be the cause...
File: Windowssystem32
tkrnlpa.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature of this file"

So I figure I'm getting somewhere, load the disk repair, and I get "Startup repair could not repair the problem." along with other steps i should take to "send it to microsoft"() So now i run commands like chkdsk /p,bootmbr,bootfix (I've done this before). NONE of these do a darn thing to solve my problem. (Ive done the F8 thing with the load drivers w/o signatures; didnt work.) So, I figure i should take matters into my own hands. So i open up a CMD, and copy a ntkrnlpa.exe from my install disk and replace it with the one on my hard drive. Logical? I thought so. But same results. Except for one thing, when the repair thing runs again, the details say that the file "pshed.dll" is corrupt. I replace this one, doesnt work, and then says the ntoskrnl.exe is corrupt too.... I replace this one as well, but this one has remained corrupt. I sometimes get a new message when running the startup repair. System volume on disk is corrupt. But other times I get "Boot status indicates that the OS booted successfully." So Ive pretty much used all I can think of, short of booting BartPE and copying my important files and reinstalling. One more thing that happened. Last night (when everything was running smoothly) diskeeper did a boot time defrag. I think something went wrong and this is what is causing all this trouble.

View 4 Replies View Related

Windows Failed To Start: Recovery Disks

Mar 19, 2009

my pc wouldnt boot before so i clicked repair computer then after ten minutes it tries to use sytsem restore but it still go any further than the windows loading bar so i try to boot in safe mode but when i turn it on again it says "windows failed to start" and asking to insert your windows insallation cd in but most vista comps dont come with a installation cd so i try using my acer recovery disks but they dont work so what do i do ??? oh yes vista home premium 32 bit

View 1 Replies View Related

Boot Failure 'Windows Failed To Start'

Jun 30, 2008

I'm currently having some serious problems with my main desktop pc Q6600, 4gb Ram, Vista 64 Ultimate where when I turn the machine on I get a message saying: 'Windows failed to start, A recent hardware or software change might be the cause File: WindowsSysWOW64DriversPxHelp20.sys Status 0x0000359 info: Failed to load because a critical system driver is missing or corrupt.' This problem started after I ran windows update a few days ago. its asked me to try putting the vista dvd in and run a repair, but that failed miserably. other things I would like to point out is that I am running a Raid (Stripe) on my system drive, so I cannot just take the discs out to recover the data. Is there anyway I can solve this issue whilst keeping the operating system intact? finally i'm running the OEM version of vista....I'm feeling pretty fed up as most of my important data is on these drives and ironically I was going to purchase a larger backup disc this month when I get paid.....

View 4 Replies View Related

Windows Failed To Start: Boot Critical File

Feb 13, 2009

I lost power to my home and my battery backup gave out before I got home to safely shutdown (I don’t normally lose power long enough to wipe out my backup). When power came back on I rebooted Vista 32Bit and was able to login but there were errors (which I did not record). Vista informed me there were errors and suggested I reboot and run CHKDSK. I tried to run chkdsk next time windows load but after my bios loaded I had nothing but a Black screen. I waited for 8 hours and still black screen. So I booted from my Factory Dell CD and Vista was unable to repair automatically.

Boot critical file C:Windowssystem32driversWdf0100.sys is corrupt
Boot critical file C:WDFLDR.SYS is corrupt.

View 4 Replies View Related

Windows Failed To Start, Registry File Missing Or Corrupted

Mar 24, 2008

My computer was working properly,then I had a power problem, my computer turned off and turned on again.Now my windows doesn't open. When I try to open I receive this message: Windows failed to start. File:windowssystem32configsystem Status:0xc000014c Info: Windows failed to load because the system registry file is missing or corrupted.

Need to fix it without losing my files.I have a restore cd, but I dont want to use it, because I can't lose my files.The cd doesnt has the choice to repair windows.Just restore it. I am using Windows vista premium and my computer is Aspire E380 (Acer) It has C: and D: partition, but I dont know if it is 32 or 64 I already use all steps in F8 screen, safe mode....last configuration...anything didn't work.

View 7 Replies View Related

Windows Failed To Start: Shutdown And Install Updates In Vista

Oct 6, 2009

last night before bed I clicked shutdown and install updates in Vista. I woke up this morning and my computer will not turn on. It leads me to this: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your windows installation disc and restart your computer.

2. Choose your language settings, and then click "next"

3. Click "repair your computer"

If you do not have this disc, contact your system administrator or computer manufacturer for assisance.

File: BootBCD

Status: 0xc000000f

Info: An error occured while attempting to read the boot configuration data.

problem I have is that I do not have vista installation dvd. I am currently studying abroad in Rome and will take more time than I have to receive the dvd in the mail. None of my friends here have one either, but they all have the same make and model computer that I do. Is it possible for one of them create a installation dvd that I could use? Or could they make a recovery disc that could as least get me to the system recovery options screen?

View 7 Replies View Related

Installation Failure On "Windows Loading Files"

Jun 27, 2008

Took out 2G ram as suggested - leaving 2G. Get through black screen with white bar "Windows loading files". Then blue screen with white horizontal bar for 35 minutes +/-. Then Install Now dialog box. Enter key code. Checks off "Copying files" Begins the "Expanding files" and goes to 11%.

Next message box: "Window cannot install required files. Make sure all files required for installation are available, and restart the installation. Error Cord: 0x8007045D. (Reviewing this error in the knowledge base does not seem to speak to a new installation.)

I reviewed my MOBO instructions and I quote: "It is important to remember that before installing the driver CD that is shipped in the kit, you need to load you operating system." So what drivers does the Vista software think it needs? I spent more than 3 phone hours with Microsoft help and they had me putting in my Win 98 disc made a royal mess of my situation. I'm back now to the beginning and yet still no installation.

View 6 Replies View Related

Screen Appears Saying "windows Is Loading Files"

Jun 27, 2008

Iv just bought a new PC, I put the vista CD in the drive and power up the computer. A screen appears saying "windows is loading files" and a bar that slowly fills up.Once the bar is full (suggesting all the files have been loaded), a new bar appears with microsoft corporation written underneath it.From looking at online install guides it appears that there should be a moving green block within this new bar however, it is completely empty and nothing happens. I have tried to install several times and left it for 40 mins or so each time, but i keep getting the same problem - i get to that stage and it seems the install freezes.

View 7 Replies View Related

Wmv Files Start In Windows Media Player

Feb 6, 2009

I've been lurking in this and other MS groups for some time hoping to find the answer to my problem, but so far, nothing has worked. Using Vista64 with 4g ram, with latest version of Windows Mail. McAfee Security Center. Latest versions of Windows Media Player and Real Player. Have scanned and found no virus or spyware (using McAfee). Problem: Often, but not always, attached .wmv files received in email will start in Windows Media Player, or in Real Player if I chose that one. In both programs the .wmv file will start with audio and video. About 1/4 into the movie, it stops playing completely. Screen goes black with a message imposed "Play Again>". No other error message.

This has been going on for a few months and it _seems_ like it was around the time that comcast changed its email program. I did notice that wmv's coming from comcast emailers would almost always behave as described, but now I notice that it also comes (seldom) from other ISPs. I have tried saving the files in a folder and then opening them by double clicking them in Explorer, but it makes no difference. I've also tried opening them directly from WMP with same results. I've updated my video driver (Nvidea), still no joy. I have been able to google the various .wav files and download and play them completely but of course I'm not sure where the emailed file originated online.

View 4 Replies View Related

Update Bios X64: "Windows Failed To Start"

Apr 11, 2007

I am trying to update the bios on my computer but I am running into problems when booting from a usb flash drive. I get the error: "Windows failed to start. A recent hardware or software change might be the cause. The boot selection failed because a required device is inaccessible."

I have been going about this process following instructions found here: Solution for Updating the BIOS on Windows Vista x64 Machines (VistaJuice)

View 5 Replies View Related

X64 System Builder "Windows Failed To Start"

Feb 6, 2009

I have just built my first computer. My whole family is a mac family but i have always found vista easy to use on my friends computers. I bought Microsoft Windows Vista Home Premium SP1 64-bit for System Builders - OEM from newegg. Now when i boot from The disc it says "Loading windows file...." and once it is done with that an error appears saying. "Windows failed to start. a Recent hardware or software change might be the cause, to fix this problem....."

It gives me ways to fix it but all of them require some OS to be on the computer and i have none.. It also says: File: windowssystem32ootwinload.exe......

View 5 Replies View Related

New Build: "Windows Failed To Start."

Mar 23, 2008

I just built a new machine. It is identical to a co-workers machine that has zero issues with the OS. I get "Windows Failed to Start." Doesn't work in safe mode, either. Repair doesn't work. Here's the log that it spits out:

Problem Event Name: StartupRepairV2
Problem Signature 01: External Media
Problem Signature 02: 6.0.6000.16386.6.0.6000.16386
Problem Signature 03: 0
Problem Signature 04: 65537
Problem Signature 05: Unknown
Problem Signature 06: FailureDuringSetup
Problem Signature 07: 0
Problem Signature 08: 0
Problem Signature 09: Unknown
Problem Signature 10: 1168
OS Version: 6.0.600.2.0.0.256.1
Locale ID: 1033

View 4 Replies View Related

Windows Failed To Start: ERROR "cannot Create A File When That File Already Exists" (0x800700b7)

Mar 23, 2008

My elderly Mother's Vista PC isn't working, and as she relies on this for shopping etc I need to get it working (I am several hundred miles from her). The PC tried to install the latest Vista updates (20/2/2008) but upon restart she gets the message "Windows failed to restart - a recent hardware/software change may be the cause - File windowssystem32winload.exe "The selected file could not be loaded". She doesn't have a start in "normal mode" option. I have walked her through trying system repair/restore using the Vista installation Cd, but after trying to restore she gets the message; "system restore failed due to an unspecified error; "cannot create a file when that file already exists" (0x800700b7) We have tried 3 different restore points with the same result.

View 9 Replies View Related

Windows Not Loading

Jan 11, 2010

I have a pc with windows xp media centre edition, running flight simmulator.. I installed the accelerator kit on it.. now its not starting up...getting blue screen saying either "uninstall your antivirus program or driver" I can not load it to safe mode to do that, I have run the repair from the recovery system still no luck.

View 6 Replies View Related

Windows Not Loading Due To Updates

Oct 5, 2009

I've tried everything to fix my Dell Inspiron 1545 running Windows Vista Home Premium 32bit and I can't seem to work out what to do anymore. My laptop automatically did some updates earlier today and I rebooted as advised, unfortunately it failed to load up at all and I got a screen telling me windows has failed to start. Problem could be due to a recent change of hardware or software. The only recent change being the updates. I've tried to do a system repair, which hasn't worked. All it does is load a blank screen with, eventually a movable mouse cursor, nothing else happens after. I've tried to load from the boot cd also, but I have the same problem.

The white bar loads, message saying windows is loading files then as soon as its passed the blank screen and mouse cursor come up. I can't load anything in safe mode as it just comes up with the windows failed to start message. I'm at a loss, I think. And if I can't reinstall windows then it looks like my laptop is messed up completely. All I haven't tried is perhaps loading safe mode with command prompt and trying to do a system restore, and Repair Install For Vista this, which I'm not quite sure I understand fully. I might have had SP1 installed already. Anyone got anything they can chuck my way to advise me to do? I haven't had the laptop all THAT long.

View 9 Replies View Related

Windows Update Not Loading

Aug 10, 2009

When I click on Windows Update, it just hangs with the circle cursor spinning. All that opens up is a white box, and nothing happens. I had no issues running Update 2 days ago. It just started this yesterday out of the blue. IDK if it is related, but I also can't update drivers in Device Mgr. It just keeps searching the web for drivers, and nothing ever happens.

View 5 Replies View Related

Black Screen Before Loading Windows

Nov 30, 2008

I have a problem with Vista. When I start my computer, it displays a black screen for a couple of minutes before starting to load Vista. I don't really know what to say more, since I'm totally clueless with this one. What I've tried to do, is to update my drivers. I've also updated my BIOS. What should I try next?

View 9 Replies View Related

Windows Defender Not Loading At Startup

Jun 1, 2010

It's ticked in msconfig - Startup, but never loads Alert each time loaded manually and 'Turned-On' but never loads on reboot

View 7 Replies View Related

Windows Starts Loading Slow

Dec 20, 2007

After powering on the computer, it literally takes 10-15 minutes to start loading windows. Once windows starts loading, everything is fine, and the computer runs beautifully. I'm thinking this has something to do with the bios, but don't know where to start. Once again, the computer stalls before windows even begins to load.

View 7 Replies View Related

Windows Not Starting Past Loading Bar

Jan 7, 2010

I haven't been able to start Windows past the green loading bar. The first couple of days when I tried to turn on the computer it would take me to an 'Error Start Up' screen where I would try to restart using safe mode or something.

Now though, it does the blue HP screen, then goes black with a grey loading bar that says "Loading Files" and then from there it goes to the green loading bar. This has happened to me once before, although, it was fixed in just a couple of days. I removed the main power cord and left it out for a day and when I tried again, it worked. I've tried doing that now, but no such luck......

View 7 Replies View Related

Windows Update Failed 'failed Message'

May 26, 2009

I have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved