My computer was working properly,then I had a power problem, my computer turned off and turned on again.Now my windows doesn't open. When I try to open I receive this message: Windows failed to start. File:windowssystem32configsystem Status:0xc000014c Info:Windows failed to load because the system registry file is missing or corrupted. fix it without losing my files.I have a restore cd, but I dont want to use it, because I can't lose my files.The cd doesnt has the choice to repair windows.Just restore it. I am using Windows vista premium and my computer is Aspire E380 (Acer) It has C: and D: partition, but I dont know if it is 32 or 64 I already use all steps in F8 screen, safe mode....last configuration...anything didn't work.
I have a dell 1525 running vista home premium 32bit. Just a few minutes ago I was transfering music from my hard drive to my external hard drive, while on the internet looking at videos. I noticed that the file transfer process was taking a while so i decided to cancel the process. Some error message popped up after a while, being stupid I didn't write them down and kept watching my videos. My desktop disappeared and i cou;dn't start task manager so i decided to restart my computer... When I restarted I was greeted with "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart the computer. 2. Choose your language settings and click next. 3. Click "repair your computer"
It also gives me the following options:
4. Safe Mode 5. Safe Mode with networking 6. Safe Mode with Command Prompt 7. Last known good configuration 8. Start Windows normally
When I restart booting from the reinstall dvd from dell and i get to the repair my computer part, vista isn't listed in the options to repair. And I can't browse my main hard drive. Also when I start into safe mode, all the driver load then I get a quick flash of a blue screen which says(i video tapped it then slowed it down to read the message): A problem has been detected and windows[COLOR=#05408F ! important][COLOR=#05408F ! important][/COLOR][/COLOR] has been shut down to prevent damage to your computer.........
I have OEM version of windows vista 64 home premium. Installation goes normally but when computer reboots first time it shows an error message. Repair doesnot work, have formatted harddrive and tried to instal it couple of times but it still shows error. Windows failed to start. A recent hardware or software change might be the cause. File: windowssystem32driversvolsnap.sys status:0xc0000221 Info: Windows failed to load because a critical system driver is missing, orcorrupt.
My laptop (Advent 8117 running Vista if that helps) has been working fine, then this morning things went pear-shaped. To begin with things worked as usual - Everything seemed to load up as normal, I left the room for maybe 5-10 minutes and when I returned there was a black screen. I waited a while and nothing happened so I restarted. It comes up with 'Windows failed to start. A recent hardware or software change might be the cause.' From there I can either start normally or run a repair. It doesn't seem to matter what I click here because I get a 'Techguys' support thing come up either way but now nothing on it works. To begin with I ran the Repair Environment, but it couldn't fix it. I also got to try a System Restore but I seem to have no points to restore to. Now I can't get the Techguys page to do anything. So I tried running in Safe Mode but once again I'm faced with the unmoving Techguys page, and the same goes for when I try and load from the Last Know Good Configuration. I desperatly don't want to have to lose everything.
I am building a brand new system and bit the bullet and am attempting to install Vista Ultimate 64 with SP1 (Brand Spanking New DVD with SP1 on it). Everything boots up just fine, memory is okay (4 Gb), install runs fine and after the reboot, I get the following: File: Windowssystem32toskrnl.exe
Status: 0xc00000e9
Info: Windows failed to load because the kernel is missing, or corrupt. (I purchased all parts and software from Newegg) When I go to the MS Support site and put in the Product Key, it tells me that it's in an invalid format. 5 - 5 - 5 - etc is what I have, however, Microsoft is wanting 5 - 3 - 5 -etc. format. I have pulled out EVERYTHING and disconnected EVERYTHING except the DVD, HD, and vid card, so I'm running it as barebones as I can.
I recently restarted my computer and the following error message appeared. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Instert your windows installation disk and resart your computer. 2. Choose your language settings and then click "Next." 3. Click "Repair your computer."
If you don not have this disk, contact your system administrator or computer manufacturer for assistance.
File: BootBcd
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
I have followed all the instructions to no avail. I also entered the command eature and attempted to rebulid the bcd but it gives the error message "the requested system device cannot be found." I have a lot information on the hard drive so i would really like to be able to fix it without loosing any of the information.
Tried to restore to my Toshiba Equium laptop to factory settings. It started to format the disk and then Blue screened. Now it wont even boot. Error message I get is :- "windows failed to start........" File windowssystem32winload.exe status: 0xc000000f
I dont have a Vista disk (never had one) so downloaded the Vista boot repair disk. Tried the repair option on here and fixboot from the command line but still no joy.
It says something in relationship with these words. Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: boot_file Status: 0xc0000225 Info: Unexpected error has occured
I boot up my computer today and up pops a message about my bootmbr being missing. I, figuring this was quite bad, stuck in the ol' vista installation disk to run a startup repair. It does its thing, says its successful and tells me to reboot. I do, and get a new message at startup, saying,"Windows failed to start. A recent hardware or software change might be the cause... File: Windowssystem32 tkrnlpa.exe Status: 0xc0000428 Info: Windows cannot verify the digital signature of this file"
So I figure I'm getting somewhere, load the disk repair, and I get "Startup repair could not repair the problem." along with other steps i should take to "send it to microsoft"() So now i run commands like chkdsk /p,bootmbr,bootfix (I've done this before). NONE of these do a darn thing to solve my problem. (Ive done the F8 thing with the load drivers w/o signatures; didnt work.) So, I figure i should take matters into my own hands. So i open up a CMD, and copy a ntkrnlpa.exe from my install disk and replace it with the one on my hard drive. Logical? I thought so. But same results. Except for one thing, when the repair thing runs again, the details say that the file "pshed.dll" is corrupt. I replace this one, doesnt work, and then says the ntoskrnl.exe is corrupt too.... I replace this one as well, but this one has remained corrupt. I sometimes get a new message when running the startup repair. System volume on disk is corrupt. But other times I get "Boot status indicates that the OS booted successfully." So Ive pretty much used all I can think of, short of booting BartPE and copying my important files and reinstalling. One more thing that happened. Last night (when everything was running smoothly) diskeeper did a boot time defrag. I think something went wrong and this is what is causing all this trouble.
my pc wouldnt boot before so i clicked repair computer then after ten minutes it tries to use sytsem restore but it still go any further than the windows loading bar so i try to boot in safe mode but when i turn it on again it says "windows failed to start" and asking to insert your windows insallation cd in but most vista comps dont come with a installation cd so i try using my acer recovery disks but they dont work so what do i do ??? oh yes vista home premium 32 bit
I'm currently having some serious problems with my main desktop pc Q6600, 4gb Ram, Vista 64 Ultimate where when I turn the machine on I get a message saying: 'Windows failed to start, A recent hardware or software change might be the cause File: WindowsSysWOW64DriversPxHelp20.sys Status 0x0000359 info: Failed to load because a critical system driver is missing or corrupt.' This problem started after I ran windows update a few days ago. its asked me to try putting the vista dvd in and run a repair, but that failed miserably. other things I would like to point out is that I am running a Raid (Stripe) on my system drive, so I cannot just take the discs out to recover the data. Is there anyway I can solve this issue whilst keeping the operating system intact? finally i'm running the OEM version of vista....I'm feeling pretty fed up as most of my important data is on these drives and ironically I was going to purchase a larger backup disc this month when I get paid.....
I lost power to my home and my battery backup gave out before I got home to safely shutdown (I don’t normally lose power long enough to wipe out my backup). When power came back on I rebooted Vista 32Bit and was able to login but there were errors (which I did not record). Vista informed me there were errors and suggested I reboot and run CHKDSK. I tried to run chkdsk next time windows load but after my bios loaded I had nothing but a Black screen. I waited for 8 hours and still black screen. So I booted from my Factory Dell CD and Vista was unable to repair automatically.
Boot critical file C:Windowssystem32driversWdf0100.sys is corrupt Boot critical file C:WDFLDR.SYS is corrupt.
My computer was working properly,then I had a power problem, my computer turned off and turned on again.Now my windows doesn't open. When I try to open I receive this message: Windows failed to start. File:windowssystem32configsystem Status:0xc000014c Info: Windows failed to load because the system registry file is missing or corrupted.
Need to fix it without losing my files.I have a restore cd, but I dont want to use it, because I can't lose my files.The cd doesnt has the choice to repair windows.Just restore it. I am using Windows vista premium and my computer is Aspire E380 (Acer) It has C: and D: partition, but I dont know if it is 32 or 64 I already use all steps in F8 screen, safe mode....last configuration...anything didn't work.
last night before bed I clicked shutdown and install updates in Vista. I woke up this morning and my computer will not turn on. It leads me to this: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assisance.
File: BootBCD
Status: 0xc000000f
Info: An error occured while attempting to read the boot configuration data.
problem I have is that I do not have vista installation dvd. I am currently studying abroad in Rome and will take more time than I have to receive the dvd in the mail. None of my friends here have one either, but they all have the same make and model computer that I do. Is it possible for one of them create a installation dvd that I could use? Or could they make a recovery disc that could as least get me to the system recovery options screen?
When I switch my laptop on, I get the following message: "WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE...". I then have the option to launch system repair or start windows normally. Either choice I make has the same consequences...a screen launches saying "loading windows files" Then I am taken to windows loading screen with little green bar. Then the screen goes black. Not off, just black. If I try and do a system recovery, I go through the same steps via f11 but then I get the 'blue screen'. I didn't create the boot disks that one is supposed to do when they get vista.
I am trying to update the bios on my computer but I am running into problems when booting from a usb flash drive. I get the error: "Windows failed to start. A recent hardware or software change might be the cause. The boot selection failed because a required device is inaccessible."
I have been going about this process following instructions found here: Solution for Updating the BIOS on Windows Vista x64 Machines (VistaJuice)
I have just built my first computer. My whole family is a mac family but i have always found vista easy to use on my friends computers. I bought Microsoft Windows Vista Home Premium SP1 64-bit for System Builders - OEM from newegg. Now when i boot from The disc it says "Loading windows file...." and once it is done with that an error appears saying. "Windows failed to start. a Recent hardware or software change might be the cause, to fix this problem....."
It gives me ways to fix it but all of them require some OS to be on the computer and i have none.. It also says: File: windowssystem32ootwinload.exe......
I just built a new machine. It is identical to a co-workers machine that has zero issues with the OS. I get "Windows Failed to Start." Doesn't work in safe mode, either. Repair doesn't work. Here's the log that it spits out:
Problem Event Name: StartupRepairV2 Problem Signature 01: External Media Problem Signature 02: 6.0.6000.16386.6.0.6000.16386 Problem Signature 03: 0 Problem Signature 04: 65537 Problem Signature 05: Unknown Problem Signature 06: FailureDuringSetup Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: Unknown Problem Signature 10: 1168 OS Version: 6.0.600.2.0.0.256.1 Locale ID: 1033
My elderly Mother's Vista PC isn't working, and as she relies on this for shopping etc I need to get it working (I am several hundred miles from her). The PC tried to install the latest Vista updates (20/2/2008) but upon restart she gets the message "Windows failed to restart - a recent hardware/software change may be the cause - File windowssystem32winload.exe "The selected file could not be loaded". She doesn't have a start in "normal mode" option. I have walked her through trying system repair/restore using the Vista installation Cd, but after trying to restore she gets the message; "system restore failed due to an unspecified error; "cannot create a file when that file already exists" (0x800700b7) We have tried 3 different restore points with the same result.
I have been having serious difficulty getting my laptop to start in the last few months but have usually been able to solve the problems for a while until they come back but now I am faced with a new boot issue that I cannot fix.
When I turn on the laptop, after about 5 minutes I get the message "windows failed to start because the system registry file is missing or corrupt" and gives this location windowssystem32configsystem and also status: oxc000000f. I am instructed to boot from the vista dvd and repair windows, startup problems or whatever but when I try this I get the exact same message described above.
I have had a lot of startup problems recently but they have always been solved either by booting from the dvd and reparing startup problems, or more commonly, by running the chkdisk which would generally have my laptop running well for a week or so before new problems occurred. I've searched the web but people keep suggesting booting from the vista dvd which as I said isnt working. No matter what I try I get the same message, safe mode etc will also not work.
I have a HP laptop with Windows vista home edition, and this has never happened to me. It started today, in which I thought it was nothing. I'm a little worried to be honest and I don't know what's wrong with my connection. I can access the internet on my mother computer which is a desktop, yet I can't on my HP laptop. it says "The Dependency Service or Group Failed to Start"?
I just bought and installed Vista Home Premium x64, I've been running it for a few days now and I quite like it. I've had no issues with hardware and drivers. Although, two things that don't sit well with me are the start menu and the disk defragger. The start menu, in particular games, is messy and inconsistant. Games are placed in the games folder/menu and that would be fine if it did it for all games but it only puts some games there. Secondly, if a game is in the games folder, it never appears in the recently used list in the start menu. This I don't like at all. It means that the recently used list pretty much all windows programs that I rarely use. Some games are in the games folder only, some are in the games folder and the all programs list and some are in the all programs list and recently used list but not in the games folder...? Also if you delete a desktop shortcut the icon in the recently used list doesn't work as it is pointing at the desktop shortcut that is not longer there instead of the actual executable.
I feel that the start menu in Vista has been ruined in an attempt to make it more sophisticated than that of Xp. In general though, Vista IS more sophisticated and does make using windows better and easier but being that the start menu is such an integral part of day to day use, it's really something that shouldn't have failed. The defragger: i'm trying to understand how this thing works if it works at all. Very confusing! If you manually start it, the defrag process never ends and yet if you kill it after hours and hours then run a 3rd party defragger it will say that the drive is still fragmented. If it's a low level background process why doesn't it just run all the time with no gui? Anyway, apart from thsoe two mind boggling things, I really like Vista - It looks cool.
have you wanted to ask: I have the red x over my connection status and it says “connection status: unknown. The dependency service or group failed to start.” here is the fix... I’ve used: 1. Go to Start > Run > cmd 2. Copy/paste the following line and hit your Enter key: Net localgroup Administrators localservice /add 3. Reboot your computer.
When I start windows home premium on a new pc for the first time should i get an option to choose the installation language? I bought a pc in germany and the start up failed i got an error message in an endless loop i got it to start with the recovery disc but that has set it to German and i cant change it.
I have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this
I had a problem with my Windows Mail, all of the sudden I could not get my mail to show up in the inbox so I signed up for Windows Live Mail to see if I could just export everything to it but it did not work. I now have a Windows Live import box stuck on my Desktop that I cannot get rid of and I cannot get into my Windows Mail anymore. The windows live is working well but I just want to get to my old e-mails and my contacts , is this possible?
i reinstalled windows due to my vista being corrupt, i formatted the hardrive and everything seemed fine. When i woke up this morning and turned my pc on it said that windows failed to log me on because it couldnt access the event log.Now i looked in the event viewer and clicked on the error and it said this:
The LoadUserProfile call failed with the following error: An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry........
I am running Windows Vista Premium Home SP1. When I boot my computer, Windows Defender doesn't start automatically. It works fine if I start it manually. I have never run Windows OneCare, MSCONFIG shows it set to start, the Windows Defender service is set to automatic and Tools | Options has all the checkboxes checked.
I have an acer 3055WXMi laptop running Windows Vista home basic 32bit. I hav no 3rd party firewall, only other security software i have is AVG anti-virus Every time i start up my laptop windows firewall fails 2 start, windows security alerts comes up.
My speaker icon in the taskbar has a red cross on it. When I hover my mouse over it, it says "The audio service is not running", if I right click it I get 3 options
I went to my start menu and searched services.msc and checked to see if plug and play, windows audio endpoint builder, and multimedia class scheduler were all set to startup type automatic & all started. they were. so then i go to Windows Audio, right click to properties, and it is stopped. So i click to start it and it says "Windows could not start the Windows Audio service on Local Computer. Error 1079: The account specified for this service is different from the account specified for other services running in the same process."
I tried to restore my computer but my restore point is past the point when this issue originated. Also, Conexant Driver is installed and working properly. If I right click on the volume icon with a little red X through it... I can click on Open Volume Mixer, and It says "No Audio Device Installed" Yet, my audio devices are installed.
I have windows vista home premium...Security Update for Microsoft. NET Framework, Version 1.1 Service Pack (KB929729)will download, but not install....Rec'ved error codes 80246005 and 643. It downloads over and over for months.....any connection to AOL or Trend Pc-Cillin?...I'm technically challenged, so please reply in step by step solution, if you have one.
