Boot Failure 'Windows Failed To Start'
Jun 30, 2008
I'm currently having some serious problems with my main desktop pc Q6600, 4gb Ram, Vista 64 Ultimate where when I turn the machine on I get a message saying: 'Windows failed to start, A recent hardware or software change might be the cause File: WindowsSysWOW64DriversPxHelp20.sys Status 0x0000359 info: Failed to load because a critical system driver is missing or corrupt.' This problem started after I ran windows update a few days ago. its asked me to try putting the vista dvd in and run a repair, but that failed miserably. other things I would like to point out is that I am running a Raid (Stripe) on my system drive, so I cannot just take the discs out to recover the data. Is there anyway I can solve this issue whilst keeping the operating system intact? finally i'm running the OEM version of vista....I'm feeling pretty fed up as most of my important data is on these drives and ironically I was going to purchase a larger backup disc this month when I get paid.....
View 4 Replies
ADVERTISEMENT
Jun 11, 2009
It says something in relationship with these words. Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: boot_file Status: 0xc0000225 Info: Unexpected error has occured
View 5 Replies
View Related
Feb 13, 2009
I lost power to my home and my battery backup gave out before I got home to safely shutdown (I don’t normally lose power long enough to wipe out my backup). When power came back on I rebooted Vista 32Bit and was able to login but there were errors (which I did not record). Vista informed me there were errors and suggested I reboot and run CHKDSK. I tried to run chkdsk next time windows load but after my bios loaded I had nothing but a Black screen. I waited for 8 hours and still black screen. So I booted from my Factory Dell CD and Vista was unable to repair automatically.
Boot critical file C:Windowssystem32driversWdf0100.sys is corrupt
Boot critical file C:WDFLDR.SYS is corrupt.
View 4 Replies
View Related
Mar 24, 2008
My computer was working properly,then I had a power problem, my computer turned off and turned on again.Now my windows doesn't open. When I try to open I receive this message: Windows failed to start. File:windowssystem32configsystem Status:0xc000014c Info:Windows failed to load because the system registry file is missing or corrupted. fix it without losing my files.I have a restore cd, but I dont want to use it, because I can't lose my files.The cd doesnt has the choice to repair windows.Just restore it. I am using Windows vista premium and my computer is Aspire E380 (Acer) It has C: and D: partition, but I dont know if it is 32 or 64 I already use all steps in F8 screen, safe mode....last configuration...anything didn't work.
View 7 Replies
View Related
Dec 19, 2009
I have a dell 1525 running vista home premium 32bit. Just a few minutes ago I was transfering music from my hard drive to my external hard drive, while on the internet looking at videos. I noticed that the file transfer process was taking a while so i decided to cancel the process. Some error message popped up after a while, being stupid I didn't write them down and kept watching my videos. My desktop disappeared and i cou;dn't start task manager so i decided to restart my computer... When I restarted I was greeted with "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"
It also gives me the following options:
4. Safe Mode
5. Safe Mode with networking
6. Safe Mode with Command Prompt
7. Last known good configuration
8. Start Windows normally
When I restart booting from the reinstall dvd from dell and i get to the repair my computer part, vista isn't listed in the options to repair. And I can't browse my main hard drive. Also when I start into safe mode, all the driver load then I get a quick flash of a blue screen which says(i video tapped it then slowed it down to read the message): A problem has been detected and windows[COLOR=#05408F ! important][COLOR=#05408F ! important][/COLOR][/COLOR] has been shut down to prevent damage to your computer.........
View 9 Replies
View Related
Aug 19, 2008
I have OEM version of windows vista 64 home premium. Installation goes normally but when computer reboots first time it shows an error message. Repair doesnot work, have formatted harddrive and tried to instal it couple of times but it still shows error. Windows failed to start. A recent hardware or software change might be the cause. File: windowssystem32driversvolsnap.sys status:0xc0000221 Info: Windows failed to load because a critical system driver is missing, orcorrupt.
View 6 Replies
View Related
Dec 29, 2008
My laptop (Advent 8117 running Vista if that helps) has been working fine, then this morning things went pear-shaped. To begin with things worked as usual - Everything seemed to load up as normal, I left the room for maybe 5-10 minutes and when I returned there was a black screen. I waited a while and nothing happened so I restarted. It comes up with 'Windows failed to start. A recent hardware or software change might be the cause.' From there I can either start normally or run a repair. It doesn't seem to matter what I click here because I get a 'Techguys' support thing come up either way but now nothing on it works. To begin with I ran the Repair Environment, but it couldn't fix it. I also got to try a System Restore but I seem to have no points to restore to. Now I can't get the Techguys page to do anything. So I tried running in Safe Mode but once again I'm faced with the unmoving Techguys page, and the same goes for when I try and load from the Last Know Good Configuration. I desperatly don't want to have to lose everything.
View 9 Replies
View Related
May 2, 2008
I am building a brand new system and bit the bullet and am attempting to install Vista Ultimate 64 with SP1 (Brand Spanking New DVD with SP1 on it). Everything boots up just fine, memory is okay (4 Gb), install runs fine and after the reboot, I get the following: File: Windowssystem32toskrnl.exe
Status: 0xc00000e9
Info: Windows failed to load because the kernel is missing, or corrupt. (I purchased all parts and software from Newegg) When I go to the MS Support site and put in the Product Key, it tells me that it's in an invalid format. 5 - 5 - 5 - etc is what I have, however, Microsoft is wanting 5 - 3 - 5 -etc. format. I have pulled out EVERYTHING and disconnected EVERYTHING except the DVD, HD, and vid card, so I'm running it as barebones as I can.
View 9 Replies
View Related
Jul 5, 2009
I recently restarted my computer and the following error message appeared. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Instert your windows installation disk and resart your computer.
2. Choose your language settings and then click "Next."
3. Click "Repair your computer."
If you don not have this disk, contact your system administrator or computer manufacturer for assistance.
File: BootBcd
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
I have followed all the instructions to no avail. I also entered the command eature and attempted to rebulid the bcd but it gives the error message "the requested system device cannot be found." I have a lot information on the hard drive so i would really like to be able to fix it without loosing any of the information.
View 9 Replies
View Related
Apr 27, 2009
Tried to restore to my Toshiba Equium laptop to factory settings. It started to format the disk and then Blue screened. Now it wont even boot. Error message I get is :- "windows failed to start........" File windowssystem32winload.exe status: 0xc000000f
I dont have a Vista disk (never had one) so downloaded the Vista boot repair disk. Tried the repair option on here and fixboot from the command line but still no joy.
View 9 Replies
View Related
Jun 18, 2008
I boot up my computer today and up pops a message about my bootmbr being missing. I, figuring this was quite bad, stuck in the ol' vista installation disk to run a startup repair. It does its thing, says its successful and tells me to reboot. I do, and get a new message at startup, saying,"Windows failed to start. A recent hardware or software change might be the cause...
File: Windowssystem32
tkrnlpa.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature of this file"
So I figure I'm getting somewhere, load the disk repair, and I get "Startup repair could not repair the problem." along with other steps i should take to "send it to microsoft"() So now i run commands like chkdsk /p,bootmbr,bootfix (I've done this before). NONE of these do a darn thing to solve my problem. (Ive done the F8 thing with the load drivers w/o signatures; didnt work.) So, I figure i should take matters into my own hands. So i open up a CMD, and copy a ntkrnlpa.exe from my install disk and replace it with the one on my hard drive. Logical? I thought so. But same results. Except for one thing, when the repair thing runs again, the details say that the file "pshed.dll" is corrupt. I replace this one, doesnt work, and then says the ntoskrnl.exe is corrupt too.... I replace this one as well, but this one has remained corrupt. I sometimes get a new message when running the startup repair. System volume on disk is corrupt. But other times I get "Boot status indicates that the OS booted successfully." So Ive pretty much used all I can think of, short of booting BartPE and copying my important files and reinstalling. One more thing that happened. Last night (when everything was running smoothly) diskeeper did a boot time defrag. I think something went wrong and this is what is causing all this trouble.
View 4 Replies
View Related
Mar 19, 2009
my pc wouldnt boot before so i clicked repair computer then after ten minutes it tries to use sytsem restore but it still go any further than the windows loading bar so i try to boot in safe mode but when i turn it on again it says "windows failed to start" and asking to insert your windows insallation cd in but most vista comps dont come with a installation cd so i try using my acer recovery disks but they dont work so what do i do ??? oh yes vista home premium 32 bit
View 1 Replies
View Related
Mar 24, 2008
My computer was working properly,then I had a power problem, my computer turned off and turned on again.Now my windows doesn't open. When I try to open I receive this message: Windows failed to start. File:windowssystem32configsystem Status:0xc000014c Info: Windows failed to load because the system registry file is missing or corrupted.
Need to fix it without losing my files.I have a restore cd, but I dont want to use it, because I can't lose my files.The cd doesnt has the choice to repair windows.Just restore it. I am using Windows vista premium and my computer is Aspire E380 (Acer) It has C: and D: partition, but I dont know if it is 32 or 64 I already use all steps in F8 screen, safe mode....last configuration...anything didn't work.
View 7 Replies
View Related
Oct 6, 2009
last night before bed I clicked shutdown and install updates in Vista. I woke up this morning and my computer will not turn on. It leads me to this: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assisance.
File: BootBCD
Status: 0xc000000f
Info: An error occured while attempting to read the boot configuration data.
problem I have is that I do not have vista installation dvd. I am currently studying abroad in Rome and will take more time than I have to receive the dvd in the mail. None of my friends here have one either, but they all have the same make and model computer that I do. Is it possible for one of them create a installation dvd that I could use? Or could they make a recovery disc that could as least get me to the system recovery options screen?
View 7 Replies
View Related
Mar 23, 2008
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
View 7 Replies
View Related
Nov 12, 2009
I know there on serveral topics on this however I have tried a few methods already.sorry if i am indeed repeating a issue already addressed just slap the link on me please but anyway back to my problem. Apparently one day after i installed a Windows Update, my computer went haywire. It just wouldnt start up and made a couple beeping sounds. I took my ram out and put it back in and my cpu started up however the boot time took 5-10mintues to start up, i didnt exactly time it but it took much longer then my usual 30secs - 1min startup when my cpu was fine. I tried to fix it by changing the number of processors running and changing my startup programs but nothing worked. Now i leave my cpu on hibernate where it would be much quicker to logon rather then shutting my cpu down and going through that whole process. I decided to factory restore it and it still took 5 - 10mins.is it my hardware?
View 4 Replies
View Related
Apr 26, 2009
When I switch my laptop on, I get the following message: "WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE...". I then have the option to launch system repair or start windows normally. Either choice I make has the same consequences...a screen launches saying "loading windows files" Then I am taken to windows loading screen with little green bar. Then the screen goes black. Not off, just black. If I try and do a system recovery, I go through the same steps via f11 but then I get the 'blue screen'. I didn't create the boot disks that one is supposed to do when they get vista.
View 7 Replies
View Related
Jul 4, 2009
yesterday i was playing on my computer and my pc froze. when i turned it on again it was asking if i want to repair the start-up files or just start, i selected just start and it took very long time loading the windows vista (the loading bar before the login) and when the bar was gone the computer screen turns blue for one second and it reboots. after that i selected to repair the files, and after some time i got the mouse icon on the blue screen with nothing else. what's my play here? i'm really bad with computers so i guess it's better to take it to a store?
View 5 Replies
View Related
Mar 23, 2008
my computer slows to a crawl. Control Atl delete yields, after a long black screen,?failure - security options?logon process has failed to create the security options dialog.?Have run complete checkdisk and hard drive tests and everything comes up okay. No events shown in event viewer. I see postings of this problem all over the internet but no solutions.
View 9 Replies
View Related
Apr 11, 2007
I am trying to update the bios on my computer but I am running into problems when booting from a usb flash drive. I get the error: "Windows failed to start. A recent hardware or software change might be the cause. The boot selection failed because a required device is inaccessible."
I have been going about this process following instructions found here: Solution for Updating the BIOS on Windows Vista x64 Machines (VistaJuice)
View 5 Replies
View Related
Feb 6, 2009
I have just built my first computer. My whole family is a mac family but i have always found vista easy to use on my friends computers. I bought Microsoft Windows Vista Home Premium SP1 64-bit for System Builders - OEM from newegg. Now when i boot from The disc it says "Loading windows file...." and once it is done with that an error appears saying. "Windows failed to start. a Recent hardware or software change might be the cause, to fix this problem....."
It gives me ways to fix it but all of them require some OS to be on the computer and i have none.. It also says: File: windowssystem32ootwinload.exe......
View 5 Replies
View Related
Feb 17, 2009
I have two 500GB HDD's. I have installed vista on first one and I am using the second one for just storing my data. Today, I wanted to unplug the second HDD [depot disk] but after unpluging it my sistem gave me an error: "Disk Error: Please Insert System Dısk" Why? My OS is not instaled on that one. Then I pluged it and opened vista and saw the following picture:
Vista sees my second HDD [D:] as a system disk. What is the problem? Was vista installed on the other HDD also when I installing vista since they were both connected?
View 4 Replies
View Related
Sep 3, 2009
When starting my computer all I get is 'The User Profile Service failed the logon. User profile cannot be loaded. I can start the computer up in safe mode but what to do next?
View 4 Replies
View Related
Mar 23, 2008
I just built a new machine. It is identical to a co-workers machine that has zero issues with the OS. I get "Windows Failed to Start." Doesn't work in safe mode, either. Repair doesn't work. Here's the log that it spits out:
Problem Event Name: StartupRepairV2
Problem Signature 01: External Media
Problem Signature 02: 6.0.6000.16386.6.0.6000.16386
Problem Signature 03: 0
Problem Signature 04: 65537
Problem Signature 05: Unknown
Problem Signature 06: FailureDuringSetup
Problem Signature 07: 0
Problem Signature 08: 0
Problem Signature 09: Unknown
Problem Signature 10: 1168
OS Version: 6.0.600.2.0.0.256.1
Locale ID: 1033
View 4 Replies
View Related
Mar 28, 2008
I have a 3month old PC - clean installed with Vista Home Prem OEM. As of 8 days ago will not finish booting - simply ends with a mouse pointer on a black screen (pointer moves when mouse is moved). Have tried - everything - full memory diagnostics, chkdsk /r, System restore (found no restore points), all SAFE modes, Last good config. In place upgrade is disabled as it is an OEM build. Intel P35 chipset MB, E6850 CPU. No new hardware installed. No bug check codes displayed (no blue screen). Was fully up to date with WU, and drivers - and was running well since built. It is as if the profile is corrupt - but there was no indication of a problem. If this was Win XP I would do a Repair Install. Obviously no way to do that in Vista. This was before SP1 came out this week. The drive has been fully scanned for virii and spyware (HDD added to a clean working system and scanned), came up clean. I do not want to give up and clean install - there has to be another way. I have been a PC tech since 1986 - and VERY RARELY give up.
View 9 Replies
View Related
Aug 28, 2008
I am an XP user but wanted to try Vista. I bought a retail copy of Vista Ultimate. I used the latest copy of Acronis Disk Director to create a second partition on my Sony Vaio. I then installed Vista on that partition. So far, no problems. The bootloader appears to be on the XP drive. While trying to get the proper drivers installed on Vista, the hard drive got corrupted, rendering it useless. I chose to delete the partition with Acronis. My XP partition is back to the normal size (I used Acronis to get it back). But the bootloader remains. I have a continued option to select Windows Vista (which of course is not there). How do I get rid of this option and boot directly into XP? It would seem that the XP MBR is hosed in some way. I understand that Vista no longer uses boot.ini. I don't think I want to proliferate the problem by re-installing Vista. I believe that I will just go out and buy a new notebook with Vista pre-installed. But I would like to fix my current XP installation.
View 5 Replies
View Related
Mar 23, 2008
Boot Failure - bad ndis.sys, Status 0xC...C9, please insert Install disk and repair (I paraphrase) Tried ALL boot options and got the same result, so I ran the repair from the install disk. The Startup Repair ran for over twelve hours then I got BSOD: STOP 0x0000000A (0xDE49854E 0x00000002 0x00000000 0x888BA8D7)
Tried boot again same results as before; i.e. ndis. Running Startup Repair again now, two hours and counting. BTW running repair off of Anytime Upgrade disk if that makes any difference.
View 5 Replies
View Related
Mar 28, 2008
On my brand new Dell Precision laptop with Vista Business x64, I find that about 1 in 5 starts gets as far as the green progress/activity indicator bar then brings up a completely black screen but never progresses to the giant orb so that I can log in. Rebooting then brings up the suggestion to enter startup repair which I do and which has always (so far at least) solved the problem. The machine then boots normally.
View 7 Replies
View Related
May 10, 2008
i use vista premium and facing a problem when i start my comp. a message popps: "boot from cd: disc boot failure insert system disc and try"
View 4 Replies
View Related
Jul 29, 2009
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies
View Related
Feb 22, 2010
I got a customer Windows Vista Basic keep boot into Safe Mode even I keep try to boot into normal mode. I had follow question:
1. How this happen for this Vista installation?
2. How do I fix this type of problem?
View 5 Replies
View Related
