Dual Boot Failure With XP
Aug 28, 2008
I am an XP user but wanted to try Vista. I bought a retail copy of Vista Ultimate. I used the latest copy of Acronis Disk Director to create a second partition on my Sony Vaio. I then installed Vista on that partition. So far, no problems. The bootloader appears to be on the XP drive. While trying to get the proper drivers installed on Vista, the hard drive got corrupted, rendering it useless. I chose to delete the partition with Acronis. My XP partition is back to the normal size (I used Acronis to get it back). But the bootloader remains. I have a continued option to select Windows Vista (which of course is not there). How do I get rid of this option and boot directly into XP? It would seem that the XP MBR is hosed in some way. I understand that Vista no longer uses boot.ini. I don't think I want to proliferate the problem by re-installing Vista. I believe that I will just go out and buy a new notebook with Vista pre-installed. But I would like to fix my current XP installation.
View 5 Replies
ADVERTISEMENT
Mar 23, 2008
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
View 7 Replies
View Related
Mar 26, 2008
I have built a new system to game with and have 2 new hard drives, on one I put XP Pro and then on the other I loaded Vista. I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular
Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while. I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there.
View 7 Replies
View Related
May 9, 2009
Had vista & windows 7 dual booting & then i installed xp pro & lost my dual boot. How can i get it back?
View 9 Replies
View Related
Mar 23, 2008
is it unheard of to dual-boot Vista x64 on a dual-core computer with x32 on an external drive (same software package)?
View 7 Replies
View Related
Mar 23, 2008
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies
View Related
Oct 12, 2009
I built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?
View 9 Replies
View Related
Mar 24, 2008
XP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set
Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
View 5 Replies
View Related
Mar 23, 2008
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
View 5 Replies
View Related
Mar 8, 2009
I was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
View 5 Replies
View Related
Mar 26, 2008
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies
View Related
Feb 17, 2009
I have two 500GB HDD's. I have installed vista on first one and I am using the second one for just storing my data. Today, I wanted to unplug the second HDD [depot disk] but after unpluging it my sistem gave me an error: "Disk Error: Please Insert System Dısk" Why? My OS is not instaled on that one. Then I pluged it and opened vista and saw the following picture:
Vista sees my second HDD [D:] as a system disk. What is the problem? Was vista installed on the other HDD also when I installing vista since they were both connected?
View 4 Replies
View Related
Sep 3, 2009
When starting my computer all I get is 'The User Profile Service failed the logon. User profile cannot be loaded. I can start the computer up in safe mode but what to do next?
View 4 Replies
View Related
Mar 28, 2008
I have a 3month old PC - clean installed with Vista Home Prem OEM. As of 8 days ago will not finish booting - simply ends with a mouse pointer on a black screen (pointer moves when mouse is moved). Have tried - everything - full memory diagnostics, chkdsk /r, System restore (found no restore points), all SAFE modes, Last good config. In place upgrade is disabled as it is an OEM build. Intel P35 chipset MB, E6850 CPU. No new hardware installed. No bug check codes displayed (no blue screen). Was fully up to date with WU, and drivers - and was running well since built. It is as if the profile is corrupt - but there was no indication of a problem. If this was Win XP I would do a Repair Install. Obviously no way to do that in Vista. This was before SP1 came out this week. The drive has been fully scanned for virii and spyware (HDD added to a clean working system and scanned), came up clean. I do not want to give up and clean install - there has to be another way. I have been a PC tech since 1986 - and VERY RARELY give up.
View 9 Replies
View Related
Mar 23, 2008
Boot Failure - bad ndis.sys, Status 0xC...C9, please insert Install disk and repair (I paraphrase) Tried ALL boot options and got the same result, so I ran the repair from the install disk. The Startup Repair ran for over twelve hours then I got BSOD: STOP 0x0000000A (0xDE49854E 0x00000002 0x00000000 0x888BA8D7)
Tried boot again same results as before; i.e. ndis. Running Startup Repair again now, two hours and counting. BTW running repair off of Anytime Upgrade disk if that makes any difference.
View 5 Replies
View Related
Mar 28, 2008
On my brand new Dell Precision laptop with Vista Business x64, I find that about 1 in 5 starts gets as far as the green progress/activity indicator bar then brings up a completely black screen but never progresses to the giant orb so that I can log in. Rebooting then brings up the suggestion to enter startup repair which I do and which has always (so far at least) solved the problem. The machine then boots normally.
View 7 Replies
View Related
May 10, 2008
i use vista premium and facing a problem when i start my comp. a message popps: "boot from cd: disc boot failure insert system disc and try"
View 4 Replies
View Related
Feb 6, 2009
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies
View Related
Jul 29, 2009
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies
View Related
Feb 22, 2010
I got a customer Windows Vista Basic keep boot into Safe Mode even I keep try to boot into normal mode. I had follow question:
1. How this happen for this Vista installation?
2. How do I fix this type of problem?
View 5 Replies
View Related
Apr 27, 2010
Vista will not boot normally. I get to the black screen just before the Welcome, and then... nothing. Just a black screen. I CAN start in safe mode with networking, however. I disabled EVERYTHING in the msconfig startup, as well as all non-Microsoft service, to no avail. When I run ComboFix, I get the msg 'ComboFix is preparing to run', followed by 'Acess Denied. Administrator permissions are need to use the selected options. Use an administrator command prompt to complete these tasks'. I did right click on the CF icon on my desktop, and selected 'run as administrator' but got the same result. If I just let it run as is, I get the usual 'Scanning for infected files... This typically doesn't take more than 10 minutes, etc...', but NOTHING ever happens for at least 15 minutes after which ComboFix finally does start. However, while its running through the 50 stages, embedded in those stages is the occasional ''Access Denied. Administrator permissions are needed....". The completion of CF and subsequent restart did absolutely nothing to change the boot problem. I do have a MS Vista install disk, and I've run Startup repair. No change.....................
View 8 Replies
View Related
Jul 12, 2009
Start up repair problem signature reads as follows:
Problem Signature:
Problem event name: StartupRepairv2
Problem signature 01: AutoFailover
Problem signature 02: 6.0.6000.16386.6.0.6000.16386.....
When I boot at the Thoshiba screen (options to boot into setup/multiboot) there are green lines going vertically through the screen. It will not boot if that is the case. It then initializes start up repair which gives me the error above. I have tried to restore from earlier points to no avail. I have reinstalled vista from my disks at which point it worked for a minor peroid of time and this started to happen again. Virus? Once In awhile it will boot without the green vertical lines and will start up just fine, but this appears to be random.
View 4 Replies
View Related
May 8, 2010
I've never really had any problems with my computer acting up. I decided to add 2GB more RAM to my system this morning. Once I finally got them in there after much prodding and force I turned on my machine only to get this dreaded error message. I made sure the cords were still connected to the hard drive. I then took the RAM that I had just added back out but the error message still persists unfortunately. I'm wondering if anyone might have a suggestion as to other techniques I can try to get my system working again. I am currently running Vista Home Premium 32bit.
View 4 Replies
View Related
Sep 16, 2008
I wanted my computer do dual-boot with XP, so i made a new partition called F, and then i ran the XP CD and installed in F the CD. But now, when booting, it only shows Windows XP Professional. Have i accidentally formatted my VIsta? Because my programs from Vista are still there.
View 4 Replies
View Related
Oct 1, 2006
I would like to dual boot im running xp pro at the moment and wanted to add vista to. But i have never tried it before
Can somone show me a easy guide to do this please i have Symantec Norton Partition Magic 8.
View 9 Replies
View Related
Feb 22, 2009
I have Vista Home Premium on C:. There are a few programs that
won't run under Vista, and I've read that dual booting in easy under Vista.
I have a spare drive so I'm wondering, can I mount the spare drive and
install XP on it and use it to dual boot?
View 9 Replies
View Related
Oct 23, 2007
I first had Windows Vista installed on my "C:/" disk. After that I immediately installed Windows XP on my "F:/" disk. Remember that "F:/" is an whole other drive then the "C:/" drive! So all this went well without trouble. But then, as soon as I rebooted my PC I couldn't boot into Windows Vista and only Windows XP worked. Guess what; The bootsector of Windows Vista was either damaged or missing, I restored it using the 'restore-bootfiles' function from the Windows Vista DVD.
After doing so, I restarted my PC again, now Windows Vista worked fine but Windows XP didn't. The reason for this is kinda logical, Windows Vista uses another BootLoader than Windows XP does. The BootLoader of Windows Vista recognizes Windows XP but that's not the same the other way around. So basically it should work with the needed configuration. For (*trying to set up*) setting up a Dual Boot I used EasyBCD 1.7, but it simply isn't working. I made the following entries:
There are a total of 5 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Microsoft Windows Vista....
View 8 Replies
View Related
Jun 30, 2008
From what I am told Vista Ultimate's retail packages come with both 32 and 64 bit in the box. Is it possible to have these concurrently installed as a dual boot, or would they conflict with eachother. What if I were do do it on separate physical drives, disconnecting the other one before each install so that they don't detect eachother?
View 7 Replies
View Related
Jul 16, 2006
im trying to dual boot windows xp and windows vista when i start up my computer there was a screen that asked which OS i wanted to run and i had 2 options "Earlier Version of Windows" (WIndows XP) and "Microsoft Windows" (Windows Vista) But now my computer boots directly to vista without even asking me which OS i wanted to run. People are saying that Vista overwrote my MBR (master boot record) and now i have to modify the bcdedit.
View 4 Replies
View Related
Oct 28, 2007
Application compatibility remains one of the most annoying issues for Windows Vista users. The ability to upgrade the software to a new Vista compatible version is not always an option. The company that developed the application may no longer be around or the cost to upgrade is too high. In my case, I have a lot of classic PC games that will not run at all under Windows Vista no matter how I configure the compatibility options. In order to play my old games I need to install Windows XP. However, I am not exactly ready to give up all of the advances in Windows Vista just so that I can play my old games once in a while. The answer is to dual boot Windows Vista and XP.
Dual booting Windows XP and Vista on the same computer will allow you to select from a boot menu what operating sytem you want to run. This menu is shown right after you power on your computer. Setting up both Windows XP and Vista on one computer can be a little ticky depending what operating system you have installed first. The next two sections will help you configure both versions on your computer, depending on what OS you have installed first:
Windows XP is installed
If you want to dual boot XP and Vista and XP is already installed on your computer you will not have to do much work to dual boot vista. Just boot to your Windows Vista install DVD, select a custom install and install Vista on a separate partition or physical drive than where XP is installed. This will leave your XP install intact and automatically install a boot menu with both XP and Vista listed.
Windows Vista is installed
If you were like me and compley reformatted your hard drive and wiped out XP when you installed Vista, your setup is going to be a little more complicated. Follow these steps:
Boot up your computer with a Windows XP install CD and install Windows XP to a different partition or physical drive than where Vista is installed. When the setup is finished, your computer will automatically boot into Windows XP. Don’t worry, Windows Vista is still on your computer if you correctly installed XP to a different partition or physical drive.
When you installed XP, the Vista Boot Manager was replaced by the Windows XP boot components. The Vista Boot Manager needs to be fixed by using the Windows Vista install DVD. Boot your computer to the Windows Vista install DVD , click Next on the regional settings screen and then click on Repair your computer in the lower left of the window. Select your Windows Vista install and then run the Startup Repair. This will fix the Windows Boot Manager and Vista will once again startup automatically....
View 0 Replies
View Related
Jul 29, 2009
I recently bought a new Vista computer and after a few hours, it wouldn't boot all the way. It drew the desktop background but did nothing else. It was showing the mouse pointer, and Task Manager said only about 5 processes were running, including the desktop manager. It was not the first time I had booted it up. I wound up totally exchanging the whole computer. What would cause this to happen and what could you do to try to fix it - safe mode?
View 9 Replies
View Related
