Boot Disk Failure After RAM Install
May 8, 2010
I've never really had any problems with my computer acting up. I decided to add 2GB more RAM to my system this morning. Once I finally got them in there after much prodding and force I turned on my machine only to get this dreaded error message. I made sure the cords were still connected to the hard drive. I then took the RAM that I had just added back out but the error message still persists unfortunately. I'm wondering if anyone might have a suggestion as to other techniques I can try to get my system working again. I am currently running Vista Home Premium 32bit.
View 4 Replies
ADVERTISEMENT
Jul 29, 2009
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies
View Related
May 9, 2009
I changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......
View 4 Replies
View Related
Mar 19, 2009
I run vista 32 bit. I'm pretty sure it's Vista personal (PC didn't actually come with a Vista disk). I only use it for music and games,basic stuff. It's a Compaq....It shat itself recently, it wouldn't boot, so i borrowed the Vista Business disk from my dad to repair it/disk boot, and it worked fine, that was a couple days ago. Today it happened again, except it won't repair the same way. I start it up, it goes to the Compaq startup screen with 4 options; [Esc] Boot menu, [F9] Diagnostics, [F10] Setup, [F11] System recovery. Except I can never go to the diagnostics or system recovery menus, i press the keys and nothing happens. Then when i don't press anything it goes to a black screen with "Disk boot failure, insert system disk and press enter", so i do. Then it says "Windows is loading files" with a white bar below, once that's done it goes to the Microsoft Coporation green load bar that scrolls across over and over. Then it suddenly stops for a few minutes and a blue screen appears saying
"A problem has been detected and Windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to see if any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to disable or remove coponents, restart your computer, press F8 to select advanced startup options, then select safe mode. (pressing F8 does nothing for me) TECHNICAL INFORMATION *** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x87995395) *** nvstor.sys - Adress 87995395 base at 87991000, Datestamp 46671a61".....
View 4 Replies
View Related
Mar 23, 2008
With a formated hard drive on a Dell Dimension 2350, the Vista Home Premium Install Disk took eight minutes to get to the first screen. I subsequently cleaned out all cards from PCI slots and disabled everything I could in the BIOS and got the same results.
View 4 Replies
View Related
Mar 23, 2008
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
View 7 Replies
View Related
Feb 17, 2009
I have two 500GB HDD's. I have installed vista on first one and I am using the second one for just storing my data. Today, I wanted to unplug the second HDD [depot disk] but after unpluging it my sistem gave me an error: "Disk Error: Please Insert System Dısk" Why? My OS is not instaled on that one. Then I pluged it and opened vista and saw the following picture:
Vista sees my second HDD [D:] as a system disk. What is the problem? Was vista installed on the other HDD also when I installing vista since they were both connected?
View 4 Replies
View Related
Sep 3, 2009
When starting my computer all I get is 'The User Profile Service failed the logon. User profile cannot be loaded. I can start the computer up in safe mode but what to do next?
View 4 Replies
View Related
Jan 9, 2008
Automatic backup worked fine until December 26 (daily). Since that date it has failed. T'he error code is as follows: Catastrophic Failure, 0x8000FFFF. Also, check disk will not work.
View 7 Replies
View Related
Nov 7, 2008
I have 2 hard disk drives: Seagate 1000GB 7200.11 32MB Western Digital 150GB 10KRPM 16MB and two days ago, the Seagate hard drive isnt being recognized/seen by the computer. I have an Asus P5Q3 Deluxe mother board. A week before this problem I was getting alot of BSOD's and freezes, turned out to be faulty RAM, but added this in case it might help. I have never had this problem before... I unplugged and replugged the hard drive, and switched a cord that links it to the motherboard. I have also tried putting the cord into a different SATA port but it didnt work, I didnt try a diff power cord yet, but I will see if it works or not and post it PS - I'm not very computer technical or w/e, but
View 6 Replies
View Related
Mar 28, 2008
I have a 3month old PC - clean installed with Vista Home Prem OEM. As of 8 days ago will not finish booting - simply ends with a mouse pointer on a black screen (pointer moves when mouse is moved). Have tried - everything - full memory diagnostics, chkdsk /r, System restore (found no restore points), all SAFE modes, Last good config. In place upgrade is disabled as it is an OEM build. Intel P35 chipset MB, E6850 CPU. No new hardware installed. No bug check codes displayed (no blue screen). Was fully up to date with WU, and drivers - and was running well since built. It is as if the profile is corrupt - but there was no indication of a problem. If this was Win XP I would do a Repair Install. Obviously no way to do that in Vista. This was before SP1 came out this week. The drive has been fully scanned for virii and spyware (HDD added to a clean working system and scanned), came up clean. I do not want to give up and clean install - there has to be another way. I have been a PC tech since 1986 - and VERY RARELY give up.
View 9 Replies
View Related
Aug 28, 2008
I am an XP user but wanted to try Vista. I bought a retail copy of Vista Ultimate. I used the latest copy of Acronis Disk Director to create a second partition on my Sony Vaio. I then installed Vista on that partition. So far, no problems. The bootloader appears to be on the XP drive. While trying to get the proper drivers installed on Vista, the hard drive got corrupted, rendering it useless. I chose to delete the partition with Acronis. My XP partition is back to the normal size (I used Acronis to get it back). But the bootloader remains. I have a continued option to select Windows Vista (which of course is not there). How do I get rid of this option and boot directly into XP? It would seem that the XP MBR is hosed in some way. I understand that Vista no longer uses boot.ini. I don't think I want to proliferate the problem by re-installing Vista. I believe that I will just go out and buy a new notebook with Vista pre-installed. But I would like to fix my current XP installation.
View 5 Replies
View Related
Mar 23, 2008
Boot Failure - bad ndis.sys, Status 0xC...C9, please insert Install disk and repair (I paraphrase) Tried ALL boot options and got the same result, so I ran the repair from the install disk. The Startup Repair ran for over twelve hours then I got BSOD: STOP 0x0000000A (0xDE49854E 0x00000002 0x00000000 0x888BA8D7)
Tried boot again same results as before; i.e. ndis. Running Startup Repair again now, two hours and counting. BTW running repair off of Anytime Upgrade disk if that makes any difference.
View 5 Replies
View Related
Mar 28, 2008
On my brand new Dell Precision laptop with Vista Business x64, I find that about 1 in 5 starts gets as far as the green progress/activity indicator bar then brings up a completely black screen but never progresses to the giant orb so that I can log in. Rebooting then brings up the suggestion to enter startup repair which I do and which has always (so far at least) solved the problem. The machine then boots normally.
View 7 Replies
View Related
May 10, 2008
i use vista premium and facing a problem when i start my comp. a message popps: "boot from cd: disc boot failure insert system disc and try"
View 4 Replies
View Related
Feb 22, 2010
I got a customer Windows Vista Basic keep boot into Safe Mode even I keep try to boot into normal mode. I had follow question:
1. How this happen for this Vista installation?
2. How do I fix this type of problem?
View 5 Replies
View Related
Apr 27, 2010
Vista will not boot normally. I get to the black screen just before the Welcome, and then... nothing. Just a black screen. I CAN start in safe mode with networking, however. I disabled EVERYTHING in the msconfig startup, as well as all non-Microsoft service, to no avail. When I run ComboFix, I get the msg 'ComboFix is preparing to run', followed by 'Acess Denied. Administrator permissions are need to use the selected options. Use an administrator command prompt to complete these tasks'. I did right click on the CF icon on my desktop, and selected 'run as administrator' but got the same result. If I just let it run as is, I get the usual 'Scanning for infected files... This typically doesn't take more than 10 minutes, etc...', but NOTHING ever happens for at least 15 minutes after which ComboFix finally does start. However, while its running through the 50 stages, embedded in those stages is the occasional ''Access Denied. Administrator permissions are needed....". The completion of CF and subsequent restart did absolutely nothing to change the boot problem. I do have a MS Vista install disk, and I've run Startup repair. No change.....................
View 8 Replies
View Related
Jul 12, 2009
Start up repair problem signature reads as follows:
Problem Signature:
Problem event name: StartupRepairv2
Problem signature 01: AutoFailover
Problem signature 02: 6.0.6000.16386.6.0.6000.16386.....
When I boot at the Thoshiba screen (options to boot into setup/multiboot) there are green lines going vertically through the screen. It will not boot if that is the case. It then initializes start up repair which gives me the error above. I have tried to restore from earlier points to no avail. I have reinstalled vista from my disks at which point it worked for a minor peroid of time and this started to happen again. Virus? Once In awhile it will boot without the green vertical lines and will start up just fine, but this appears to be random.
View 4 Replies
View Related
Jun 3, 2008
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies
View Related
Aug 31, 2008
hp tool ask to do this "Then please go to “using DOS system files” column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies
View Related
Mar 3, 2009
How do I stop Vista from chewing on my disks. I have had a failure of my C: hard disk and i want to stop Vista from chewing on my disk. Had to replace it and reinstall everything
View 9 Replies
View Related
Jul 29, 2009
I recently bought a new Vista computer and after a few hours, it wouldn't boot all the way. It drew the desktop background but did nothing else. It was showing the mouse pointer, and Task Manager said only about 5 processes were running, including the desktop manager. It was not the first time I had booted it up. I wound up totally exchanging the whole computer. What would cause this to happen and what could you do to try to fix it - safe mode?
View 9 Replies
View Related
Mar 26, 2008
I have built a new system to game with and have 2 new hard drives, on one I put XP Pro and then on the other I loaded Vista. I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular
Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while. I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there.
View 7 Replies
View Related
Jun 6, 2009
I run vista 32 home premium. My Pc was having blue screen errors. I ran every test that my pc could run ad everything passed. I was still having crashes so I decided to do a system recovery hoping that it would fix the problem. After doing a back up and system recovery the pc restarted and reformated the disk for windows. Everything was fine for about 2 minutes after the desk top loaded. Anoter blue screen and when it went to boot i got a boot failure please insert disk and press enter. I created a boot disk because i do not have the software for my pc because it got lost in a move. Anyway the boot up disk booted to pc doctor. I did every test that it would do everything is passing but i still get the boot error.
View 4 Replies
View Related
Jun 30, 2008
I'm currently having some serious problems with my main desktop pc Q6600, 4gb Ram, Vista 64 Ultimate where when I turn the machine on I get a message saying: 'Windows failed to start, A recent hardware or software change might be the cause File: WindowsSysWOW64DriversPxHelp20.sys Status 0x0000359 info: Failed to load because a critical system driver is missing or corrupt.' This problem started after I ran windows update a few days ago. its asked me to try putting the vista dvd in and run a repair, but that failed miserably. other things I would like to point out is that I am running a Raid (Stripe) on my system drive, so I cannot just take the discs out to recover the data. Is there anyway I can solve this issue whilst keeping the operating system intact? finally i'm running the OEM version of vista....I'm feeling pretty fed up as most of my important data is on these drives and ironically I was going to purchase a larger backup disc this month when I get paid.....
View 4 Replies
View Related
Mar 23, 2008
I have been trying to upgrade from Windows XP Tablet Edition to Vista Ultimate on my Travelmate C300 laptop. I have found the following error file after the install fails in the location: C:$WINDOWS.~BTSourcesPanther The file is called: setuperr.log The content is quite long but i will post it here -decipher it and advise how i can upgrade to Vista?
setuperr.log *** Content 2008-01-10 20:29:48, Error [0x0808f5] MIG AddDriverFiles: SetupDiBuildDriverInfoList failed[gle=0x00000002] 2008-01-10 20:38:21, Error [0x08081e] MIG Failed to load manifest at :$WINDOWS.~BTSourcesdlmanifestserrorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134; . . void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)....................
View 5 Replies
View Related
Aug 22, 2008
Specs: HP Pavillion m8100 n.
System: 32 bit
OS: Windows Vista Home Premium
AMD Athlon 64x2 Dual Core Processor 5600*
Welll I have an HP Pavillion m8100n TV PC and a couple of months ago the computer froze and I restarted it but it gave me an error saying there was a boot disk error and I had no idea what to do about itI recovered the computer but a week later same results and now I tried to install Home Premium again and it's giving me errors like:
DRIVE_IRQL_NOT_LESS_OR_EQUAL, and I have NOOO idea, what it means..and at the bottom with techincal information it says: *** STOP: 0X000000D1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xFFFFFA60012FC23E)
*nvstor.sys - Address FFFFFA60012FC23E base at FFFFFA60012F6000, DateStamp 46671a38, and I have no idea what to do. And when I tried installing Vista it worked the first time...for like one day than it get all those errors I just mentioned..and in addition to all those bad problems, my recovery partition of the computer was deleted.
View 9 Replies
View Related
May 2, 2008
laptop runs vista but my desktop runs XP. I know this is a Visya community but can anyone tell me why all of a sudden everytime i am booting up on my XP desktop it says "a disk check has been scheduled, windows will now check disk" This process takes hours. how do I get my desktop to boot normally?
View 6 Replies
View Related
Mar 6, 2008
All you usually hear is that Vista is horrible to work with but seems like people here figured it out, so thanks A year ago when i built my new computer and decided to get Vista, I went to BestBuy and they gave me what I thought i needed. Turns out it was an upgrade version of Vista Ultimate and I ended up having to use my old IDE HDD ever since. I'm wondering if there's a way to change so that Vista can load off of my SATA HDD.
View 4 Replies
View Related
Mar 23, 2008
Just finished building my new workstation....1x 250GB SATA drive on wich I want to install Vista Ultimate x64. 3x 500GB SATA drive wich i'd like to have running in Raid-5.
Asus P5E motherboard.
My first take was this:
1) connect all HDD's
2) Install vista on 250GB drive, leave 500GB drives alone for now.
3) Update Vista.
4) Restart, enable RAID in BIOS.
5) Ctrl+I at startup, setup RAID-5 with the 3 500GB HDD's in RAIDmanager. So far so good..... RAID manager shows RAID-5 correctly and shows that 250GB drive isnon-raid.
6) Reset, problem: no startup *"No bootbable drives found"* In BIOS, it shows all drives under boot devices, and the 250GB drive asthe first boot disk.But before the 250GB name it sais RAID also, wich I guess it shouldnot.......
View 4 Replies
View Related
Jul 29, 2009
When I had XP, I had a startup problem so I rebooted with a Windows XP CD that came with the computer. It fixed it.
I'm not sure if this is called a boot or recovery disk, or both.
I was hoping to make a similar disk for my new Vista (Gateway)computer but I'm not sure how to do it. I read something about an emergency thing that takes up 3 DVDs!
View 9 Replies
View Related
