laptop runs vista but my desktop runs XP. I know this is a Visya community but can anyone tell me why all of a sudden everytime i am booting up on my XP desktop it says "a disk check has been scheduled, windows will now check disk" This process takes hours. how do I get my desktop to boot normally?
View 6 RepliesVista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies View RelatedDisk check at boot : Is there a way to stop that darn thing from going off the screen after it is done ? Maybe there is nothing to report, but I'd like to see what
is on that black/white screen at the end. You know, just one time?
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies View RelatedHow do I run check-disk in Vista? No "RUN" command please as that doesn't work anymore. Where is it located so I can run it?
View 9 Replies View RelatedMy sister bring me a lap top Acer Extensa 4420, the problem is that every time you boot, Vista checks the C: drive looking for problems and the reset, after the reset Vista checks again the disk and reset again, doing this in a infinite way...
Before the chkdisk program start you have the option to skip it, if you do so you get a screen saying "Vista is Configuring the update 3/3" and then restart again...
The lap top have a rescue partition, with an auto-fix option, but it didin't worked, it was on running it all the night
My hard drive appears to have some bad sectors and I would like to run chkdsk with /f to fix the problem but don't know how to do this as I need to run this program in elevated mode. If I try to run the program in Command prompt or Run?chkdsk /f I am told I do not have the previlidges to run it.
View 5 Replies View RelatedI 'm sorry if this is the wrong place to post this,but,I'm beside myself. I'm not very experienced on computers,but I can't get the disc check to run. I've tried to go to computer,properties,then tools the the check box, then to schedule a check upon restart,but the UAC box for permission never comes up,nor does it start when I restart the computer,what in the world it going on here it driving me nuts!! I am not good enough to go into the command prompt to do it,I don't know really how and not brave enough to try it. I just don't know about it. Could someone please let me know what is wrong? I have an Inspiron 531with Home Basic. Just the Basic computer.
View 5 Replies View RelatedCheck disk will not run at startup. Runs in read only mode without a problem. Have tried sfc /scannow. Have replaced autochk file. Have tried from elevated prompt, drive c: properties, as well as in safe mode. Tried Vista x64.com tutorial methods.
Lenovo R61
T8300 duo processor
2 gb ram
100 gb, 7200 rpm hard drive
4gb readyboost
Windows Vista Business
SP 1 not installed.
About 6 months ago I ran a Check Disk of my C Drive (using the Vista Error Checking tool), and checked both boxes before starting (Auto fix file system errors and Scan for/attempt recovery of bad sectors).
It ran thru the 1st 5 of the 6 checks without finding an error.
On the 6th and final check it runs, it hung (or the 4th of the 5 checks it runs - can't remember if it's 5 or 6 it runs). . I believe it began the check, but stopped and didn't move any further. A few hours later it still hadn't moved, so I did a hard shutdown....
A couple of questions:
1) On xp I could always use Windows Key + F to find such files as Charmap.exe, or files supporting my sound card - that sort of thing. This doesn't apply in Vista. Is there an equivalent?
2) How common is it that a healthy computer with Vista installed will succumb to application malfunctions that can be rectified by Check Disk? My laptop was new 2 weeks ago and apparently the hardware is in good shape, but I've had to do a couple of check disks.
i am running a vista basic on my laptop, and it just recently did something called checkdisk, and it made it so i cant see any of my pictures, of change anything for personalization, like the backround. And the theme isnt vista, it is the old windows 2000 theme, and i cant change that. does anybody know what happened, or how i can fix this??
View 5 Replies View Relatedi have a gateway notebook with vista x64 bit and every time i try to start it up it used to run the disk check and say it would take more than an hour so i left it over night and no progress and it would let me start the computer up normally because it would still scan it no matter what and wouldnt let me start up in safe mode either and now when i start up it runs this disk check in a black screen and never finishes it gets to the 2nd disk out of 3 and then continues again dosent leave me any other choice of booting up (no safe mode or regular) after this check that is never completed it takes me to the log on screen but right before it says completing update 3 out of 3 and it says 0% but never goes any further and then shuts off
View 5 Replies View RelatedMy laptop is newish. Maybe 2 months now. The model is Advent and I'm running Vista Home Premium. The checker wants to check the Vista drive for consistency. It want's to scan 3 stages. I only gets to the first stage and displayes someting along the lines of:
......
Deleted corrupt entry
Type code 128 File 19611
Deleting corrupt record
Segment 11459
Readable/writable file not re writable. And then does nothing after this. If this information is not enough I will re do the scan and take down everything displayed. But what can be the problem? I download nothing and scan it daily. I have touched no system files and have only had a small handful of crashes. Is this proble something somebody knows how to solve. This laptop was bought for me and I cannot afford to have it repaired.
last night i nearly cracked it with my computer because i did a CHKDSK and when that finishes and my computer restarts... when it just about to load the logon screen it is dark for at least up to a minute. the last time i did that i wouldn't boot into windows at all. and had to pay 60.00 for it to get looked at.
View 6 Replies View RelatedI'm trying to run check disk but when I run it, it takes way-way too long. After an hour it was still only on 13% done, ad it was there for about 45 minutes already. At this rate, it would take about a week to go throuhg the whole disk.
View 4 Replies View RelatedI'm new here, so I'll try not to screw up my post. I have Home Premium Vista, 64bit and 688GB hard drive(size when checking C: drive). I recently checked and it showed less than half full. Then a few days ago I tried saving a file and I got disk full message. I checked the c: drive again and it showed full- no space available, which should not be. I did a defrag, check disk and that did not work. I do remember seeing a warning around that time, but it vanished before I read it all. I think it said a file was not working or was corrupted and may have said something about "Catalyst". I found Catalyst Control Center on my computer, but that seems to be ATI card (graphics card?). I did delete a bunch of junk so it can now function, but latest check still shows only 72 MB available and that can't be.
View 9 Replies View RelatedI had a bad "driver install" and windows tried to do a fix/repair and in doing so it has "check disk" running at start up.I would like the "registry fix" to disable this.Upon checking the registry hkey local machinesystem it lists "controlset001" and "controlset003" which appear to list the exact same keys.Is this normal? My OS Vista Home Premium
View 5 Replies View RelatedI'm running Windows Vista Ultimate x64. My computer boots up fine gets to the windows splash screen then does chkdsk and freezes after checking drive C:. Restarting causes it to get to the Windows splash screen again and run chkdsk and freeze after checking C:. I cannot get out of this loop as my keyboard stops working at the Windows splash screen. Even using a PS2 keyboard has the same result. I have tried the following: Going into the vista repair setup thing running command prompt and typing chkntfs /x c: d: e: and then restarting. it still runs chkdsk it still freezes and I still cannot skip chkdsk. I sheduled these myself but did not expect them to freeze. I cannot stop them from checking and every time I let it run through it freezes.
View 9 Replies View RelatedAutomatic backup worked fine until December 26 (daily). Since that date it has failed. T'he error code is as follows: Catastrophic Failure, 0x8000FFFF. Also, check disk will not work.
View 7 Replies View RelatedIs there any way to see that? Bored with continuous hard disk access light flashing and whirring sound
View 5 Replies View RelatedThis Acer desktop wants to do a file check every time it is booted, even though it is always shut down correctly.
View 5 Replies View RelatedI have been playing around with my Vista for some days now. I patched my registry to account for custom visual styles and all. The computer responded fine to all these changes until today. I installed Desktop Maestro 3.0.0.830 which according to the internet is a decent registry cleaner and works with vista sp2.
What I learnt from the net is that desktop maestro will clean registry and will quicken my startup. So i ran it, and it came up with 937 problems in my registry. So the next thing i did was "Repair". and it did just that. But since then my computer hasn't been starting up at all. Before the login screen comes, i get a blue screen, which remains for too short a time for me to read, and reboots.
Turned the computer on in Safe Mode, which worked perfectly. Ran desktop maestro again, and restored the computer to a previous state. This didn't work. it kept saying C: has some errors please check. But the disk check doesnt work.......
hp tool ask to do this "Then please go to “using DOS system files” column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies View RelatedI changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
Vista started giving a blue screen a couple of days ago. Mentioned something about a bad device, but no new devices have been added. Went through the typical steps, tried to boot in safe mode and got the following errors:
AtBroker.exe The application failed to initialize properly. Click OK.
Explorer.exe The application failed to initialize properly. Blue Screen
Then booted to my install dvd, tried to fix errors. Came back with a failed check at the file system integrity check. Ran the check a second time and no errors are found. Can't boot in safe mode, and when i try to repair errors I get no errors found.
Specs: HP Pavillion m8100 n.
System: 32 bit
OS: Windows Vista Home Premium
AMD Athlon 64x2 Dual Core Processor 5600*
Welll I have an HP Pavillion m8100n TV PC and a couple of months ago the computer froze and I restarted it but it gave me an error saying there was a boot disk error and I had no idea what to do about itI recovered the computer but a week later same results and now I tried to install Home Premium again and it's giving me errors like:
DRIVE_IRQL_NOT_LESS_OR_EQUAL, and I have NOOO idea, what it means..and at the bottom with techincal information it says: *** STOP: 0X000000D1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xFFFFFA60012FC23E)
*nvstor.sys - Address FFFFFA60012FC23E base at FFFFFA60012F6000, DateStamp 46671a38, and I have no idea what to do. And when I tried installing Vista it worked the first time...for like one day than it get all those errors I just mentioned..and in addition to all those bad problems, my recovery partition of the computer was deleted.
All you usually hear is that Vista is horrible to work with but seems like people here figured it out, so thanks A year ago when i built my new computer and decided to get Vista, I went to BestBuy and they gave me what I thought i needed. Turns out it was an upgrade version of Vista Ultimate and I ended up having to use my old IDE HDD ever since. I'm wondering if there's a way to change so that Vista can load off of my SATA HDD.
View 4 Replies View RelatedJust finished building my new workstation....1x 250GB SATA drive on wich I want to install Vista Ultimate x64. 3x 500GB SATA drive wich i'd like to have running in Raid-5.
Asus P5E motherboard.
My first take was this:
1) connect all HDD's
2) Install vista on 250GB drive, leave 500GB drives alone for now.
3) Update Vista.
4) Restart, enable RAID in BIOS.
5) Ctrl+I at startup, setup RAID-5 with the 3 500GB HDD's in RAIDmanager. So far so good..... RAID manager shows RAID-5 correctly and shows that 250GB drive isnon-raid.
6) Reset, problem: no startup *"No bootbable drives found"* In BIOS, it shows all drives under boot devices, and the 250GB drive asthe first boot disk.But before the 250GB name it sais RAID also, wich I guess it shouldnot.......
When I had XP, I had a startup problem so I rebooted with a Windows XP CD that came with the computer. It fixed it.
I'm not sure if this is called a boot or recovery disk, or both.
I was hoping to make a similar disk for my new Vista (Gateway)computer but I'm not sure how to do it. I read something about an emergency thing that takes up 3 DVDs!