last night i nearly cracked it with my computer because i did a CHKDSK and when that finishes and my computer restarts... when it just about to load the logon screen it is dark for at least up to a minute. the last time i did that i wouldn't boot into windows at all. and had to pay 60.00 for it to get looked at.
View 6 RepliesMy laptop is newish. Maybe 2 months now. The model is Advent and I'm running Vista Home Premium. The checker wants to check the Vista drive for consistency. It want's to scan 3 stages. I only gets to the first stage and displayes someting along the lines of:
......
Deleted corrupt entry
Type code 128 File 19611
Deleting corrupt record
Segment 11459
Readable/writable file not re writable. And then does nothing after this. If this information is not enough I will re do the scan and take down everything displayed. But what can be the problem? I download nothing and scan it daily. I have touched no system files and have only had a small handful of crashes. Is this proble something somebody knows how to solve. This laptop was bought for me and I cannot afford to have it repaired.
I had a bad "driver install" and windows tried to do a fix/repair and in doing so it has "check disk" running at start up.I would like the "registry fix" to disable this.Upon checking the registry hkey local machinesystem it lists "controlset001" and "controlset003" which appear to list the exact same keys.Is this normal? My OS Vista Home Premium
View 5 Replies View RelatedMade the dive to Vista 64 on a new build. It is on an Asus Maximus Extreme with 2 gig of RAM and an 8800 Ultra video card. I setup to WD raptors in RAID 0. Everything with the install seemed to go without a hitch. The install is from a Vista Ultimate 64 builders pack. The install starts with no problems at all and it sees my raid array without installing any drivers. The install does the copy, expansion and so on without a hickup. It is after I enter a user name and password, date, etc and the system initiates into its "performance check" when it completely hangs. It never leaves the first splash screen of the performance check. I let it sit for over an hour and still no progress. If I hard reboot it, it comes up and wants a new id and password and computer name and eventually goes in. After that it gets ugly with problems of wanting to verify the vista installation after every reboot probably related to two seperate initializations first of which is incomplete.
Any ideas of what is causing my initial installation initialization problem? Can't hardly be drivers problems related to the raid since it installed it without a hitch or am I being naive? Am going to try and load the drivers from the Asus cd that came with the board when i get home from work and rerun the install again. If that does not work I will dismantle the raid and try the install to a single drive, etc.
On Vista Home Premium, I've set Chkdsk to run but each time it hangs about three quarters of the way through step 5, at the same cluster each time. I've run the harddisk tests (SMART, surface scan etc) from the computer recovery console and it passes every test OK. If this a physical problem with the drive or a file system one? If it's the latter why can't Chkdsk fix it? It's a new computer should I go through the hassle of returning it to the manufacturer?
P.S. History: it's a brand new Lenovo laptop. When I first switched it on, it gave me that "Vista didn't shut down properly last time" screen, but apart from that everything seemed OK until I got most of the way through all the security updates, cleaning up all the bundled software etc and Windows Update blankly refused to install SP1. I tried a system restore and that told me there was a disk error and to run Chkdsk. Chkdsk refused to run (something about the drive being locked) and in the end I did a factory reset. This is OK in that now all the updates have installed and there are no more errors, but I wanted to double check the disk, so invoked Chkdsk and... see above.
How do I run check-disk in Vista? No "RUN" command please as that doesn't work anymore. Where is it located so I can run it?
View 9 Replies View RelatedMy sister bring me a lap top Acer Extensa 4420, the problem is that every time you boot, Vista checks the C: drive looking for problems and the reset, after the reset Vista checks again the disk and reset again, doing this in a infinite way...
Before the chkdisk program start you have the option to skip it, if you do so you get a screen saying "Vista is Configuring the update 3/3" and then restart again...
The lap top have a rescue partition, with an auto-fix option, but it didin't worked, it was on running it all the night
My hard drive appears to have some bad sectors and I would like to run chkdsk with /f to fix the problem but don't know how to do this as I need to run this program in elevated mode. If I try to run the program in Command prompt or Run?chkdsk /f I am told I do not have the previlidges to run it.
View 5 Replies View RelatedI 'm sorry if this is the wrong place to post this,but,I'm beside myself. I'm not very experienced on computers,but I can't get the disc check to run. I've tried to go to computer,properties,then tools the the check box, then to schedule a check upon restart,but the UAC box for permission never comes up,nor does it start when I restart the computer,what in the world it going on here it driving me nuts!! I am not good enough to go into the command prompt to do it,I don't know really how and not brave enough to try it. I just don't know about it. Could someone please let me know what is wrong? I have an Inspiron 531with Home Basic. Just the Basic computer.
View 5 Replies View RelatedCheck disk will not run at startup. Runs in read only mode without a problem. Have tried sfc /scannow. Have replaced autochk file. Have tried from elevated prompt, drive c: properties, as well as in safe mode. Tried Vista x64.com tutorial methods.
Lenovo R61
T8300 duo processor
2 gb ram
100 gb, 7200 rpm hard drive
4gb readyboost
Windows Vista Business
SP 1 not installed.
About 6 months ago I ran a Check Disk of my C Drive (using the Vista Error Checking tool), and checked both boxes before starting (Auto fix file system errors and Scan for/attempt recovery of bad sectors).
It ran thru the 1st 5 of the 6 checks without finding an error.
On the 6th and final check it runs, it hung (or the 4th of the 5 checks it runs - can't remember if it's 5 or 6 it runs). . I believe it began the check, but stopped and didn't move any further. A few hours later it still hadn't moved, so I did a hard shutdown....
A couple of questions:
1) On xp I could always use Windows Key + F to find such files as Charmap.exe, or files supporting my sound card - that sort of thing. This doesn't apply in Vista. Is there an equivalent?
2) How common is it that a healthy computer with Vista installed will succumb to application malfunctions that can be rectified by Check Disk? My laptop was new 2 weeks ago and apparently the hardware is in good shape, but I've had to do a couple of check disks.
i am running a vista basic on my laptop, and it just recently did something called checkdisk, and it made it so i cant see any of my pictures, of change anything for personalization, like the backround. And the theme isnt vista, it is the old windows 2000 theme, and i cant change that. does anybody know what happened, or how i can fix this??
View 5 Replies View Relatedlaptop runs vista but my desktop runs XP. I know this is a Visya community but can anyone tell me why all of a sudden everytime i am booting up on my XP desktop it says "a disk check has been scheduled, windows will now check disk" This process takes hours. how do I get my desktop to boot normally?
View 6 Replies View Relatedi have a gateway notebook with vista x64 bit and every time i try to start it up it used to run the disk check and say it would take more than an hour so i left it over night and no progress and it would let me start the computer up normally because it would still scan it no matter what and wouldnt let me start up in safe mode either and now when i start up it runs this disk check in a black screen and never finishes it gets to the 2nd disk out of 3 and then continues again dosent leave me any other choice of booting up (no safe mode or regular) after this check that is never completed it takes me to the log on screen but right before it says completing update 3 out of 3 and it says 0% but never goes any further and then shuts off
View 5 Replies View RelatedDisk check at boot : Is there a way to stop that darn thing from going off the screen after it is done ? Maybe there is nothing to report, but I'd like to see what
is on that black/white screen at the end. You know, just one time?
I'm trying to run check disk but when I run it, it takes way-way too long. After an hour it was still only on 13% done, ad it was there for about 45 minutes already. At this rate, it would take about a week to go throuhg the whole disk.
View 4 Replies View RelatedI'm new here, so I'll try not to screw up my post. I have Home Premium Vista, 64bit and 688GB hard drive(size when checking C: drive). I recently checked and it showed less than half full. Then a few days ago I tried saving a file and I got disk full message. I checked the c: drive again and it showed full- no space available, which should not be. I did a defrag, check disk and that did not work. I do remember seeing a warning around that time, but it vanished before I read it all. I think it said a file was not working or was corrupted and may have said something about "Catalyst". I found Catalyst Control Center on my computer, but that seems to be ATI card (graphics card?). I did delete a bunch of junk so it can now function, but latest check still shows only 72 MB available and that can't be.
View 9 Replies View RelatedI'm running Windows Vista Ultimate x64. My computer boots up fine gets to the windows splash screen then does chkdsk and freezes after checking drive C:. Restarting causes it to get to the Windows splash screen again and run chkdsk and freeze after checking C:. I cannot get out of this loop as my keyboard stops working at the Windows splash screen. Even using a PS2 keyboard has the same result. I have tried the following: Going into the vista repair setup thing running command prompt and typing chkntfs /x c: d: e: and then restarting. it still runs chkdsk it still freezes and I still cannot skip chkdsk. I sheduled these myself but did not expect them to freeze. I cannot stop them from checking and every time I let it run through it freezes.
View 9 Replies View RelatedAutomatic backup worked fine until December 26 (daily). Since that date it has failed. T'he error code is as follows: Catastrophic Failure, 0x8000FFFF. Also, check disk will not work.
View 7 Replies View RelatedIs there any way to see that? Bored with continuous hard disk access light flashing and whirring sound
View 5 Replies View RelatedI have been playing around with my Vista for some days now. I patched my registry to account for custom visual styles and all. The computer responded fine to all these changes until today. I installed Desktop Maestro 3.0.0.830 which according to the internet is a decent registry cleaner and works with vista sp2.
What I learnt from the net is that desktop maestro will clean registry and will quicken my startup. So i ran it, and it came up with 937 problems in my registry. So the next thing i did was "Repair". and it did just that. But since then my computer hasn't been starting up at all. Before the login screen comes, i get a blue screen, which remains for too short a time for me to read, and reboots.
Turned the computer on in Safe Mode, which worked perfectly. Ran desktop maestro again, and restored the computer to a previous state. This didn't work. it kept saying C: has some errors please check. But the disk check doesnt work.......
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
Vista started giving a blue screen a couple of days ago. Mentioned something about a bad device, but no new devices have been added. Went through the typical steps, tried to boot in safe mode and got the following errors:
AtBroker.exe The application failed to initialize properly. Click OK.
Explorer.exe The application failed to initialize properly. Blue Screen
Then booted to my install dvd, tried to fix errors. Came back with a failed check at the file system integrity check. Ran the check a second time and no errors are found. Can't boot in safe mode, and when i try to repair errors I get no errors found.
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies View Relatedi Have Vista Ultimate 32Bit, and i cant get Disk Cleanup to start.. i get to the options "My Files Only" and "Files From All Users on This Computer" no mather who i choose, a box is flashing for a tiny second, and nothing happens. have tried to make a new Admin Account, tried cleanmgr, turned off and on UAC, i have searched the web for two days without finding any answers.. i have ccleaner, but i want Disk Cleanup to work!
View 6 Replies View RelatedI have a newly installed Vista64 Ultimate system. After clicking Disk Management in the Computer Management window the service never starts. Instead, the following launching information is displayed: Loading disk configuration information…..Any idea what might cause this strange behavior.
have got the following message after system repair system volume on disk is corrupt is there any solution to this
View 4 Replies View RelatedMy Vista desktop took forever to shut down last night and today it will not start at all. The hard drive spins briefly and then gives up. I have a recovery disk the CD drive lights but it will not start from there. I would like to get it up briefly to be sure I have no new photos to back up. I have Wubi Ubuntu installed and if I could get the thing started at all, I would be able to use it to make sure I can recover anything that I desperately need. I tried to start it with PC Linux OS which is capable of running from the CD drive, but no joy there either. I would love to give you more specifics but I can't since I can't view the info, I can't. It is an E-machine, one of their T series with 180 gig hard drive. It's got lots of RAM. I was running Vista but it was an upgrade from XP.
View 9 Replies View RelatedI just bought and installed Vista Home Premium x64, I've been running it for a few days now and I quite like it. I've had no issues with hardware and drivers. Although, two things that don't sit well with me are the start menu and the disk defragger. The start menu, in particular games, is messy and inconsistant. Games are placed in the games folder/menu and that would be fine if it did it for all games but it only puts some games there. Secondly, if a game is in the games folder, it never appears in the recently used list in the start menu. This I don't like at all. It means that the recently used list pretty much all windows programs that I rarely use. Some games are in the games folder only, some are in the games folder and the all programs list and some are in the all programs list and recently used list but not in the games folder...? Also if you delete a desktop shortcut the icon in the recently used list doesn't work as it is pointing at the desktop shortcut that is not longer there instead of the actual executable.
I feel that the start menu in Vista has been ruined in an attempt to make it more sophisticated than that of Xp. In general though, Vista IS more sophisticated and does make using windows better and easier but being that the start menu is such an integral part of day to day use, it's really something that shouldn't have failed. The defragger: i'm trying to understand how this thing works if it works at all. Very confusing! If you manually start it, the defrag process never ends and yet if you kill it after hours and hours then run a 3rd party defragger it will say that the drive is still fragmented. If it's a low level background process why doesn't it just run all the time with no gui? Anyway, apart from thsoe two mind boggling things, I really like Vista - It looks cool.
I'm unable to use spell check. I keep getting the following message "This language is no longer available for spell check". What do I need to do to activate spell check?
View 9 Replies View Related