No Progress Of Disk Check
May 1, 2010
i have a gateway notebook with vista x64 bit and every time i try to start it up it used to run the disk check and say it would take more than an hour so i left it over night and no progress and it would let me start the computer up normally because it would still scan it no matter what and wouldnt let me start up in safe mode either and now when i start up it runs this disk check in a black screen and never finishes it gets to the 2nd disk out of 3 and then continues again dosent leave me any other choice of booting up (no safe mode or regular) after this check that is never completed it takes me to the log on screen but right before it says completing update 3 out of 3 and it says 0% but never goes any further and then shuts off
View 5 Replies
ADVERTISEMENT
Feb 9, 2009
How do I run check-disk in Vista? No "RUN" command please as that doesn't work anymore. Where is it located so I can run it?
View 9 Replies
View Related
Dec 5, 2008
My sister bring me a lap top Acer Extensa 4420, the problem is that every time you boot, Vista checks the C: drive looking for problems and the reset, after the reset Vista checks again the disk and reset again, doing this in a infinite way...
Before the chkdisk program start you have the option to skip it, if you do so you get a screen saying "Vista is Configuring the update 3/3" and then restart again...
The lap top have a rescue partition, with an auto-fix option, but it didin't worked, it was on running it all the night
View 9 Replies
View Related
Apr 15, 2008
My hard drive appears to have some bad sectors and I would like to run chkdsk with /f to fix the problem but don't know how to do this as I need to run this program in elevated mode. If I try to run the program in Command prompt or Run?chkdsk /f I am told I do not have the previlidges to run it.
View 5 Replies
View Related
Jan 6, 2009
I 'm sorry if this is the wrong place to post this,but,I'm beside myself. I'm not very experienced on computers,but I can't get the disc check to run. I've tried to go to computer,properties,then tools the the check box, then to schedule a check upon restart,but the UAC box for permission never comes up,nor does it start when I restart the computer,what in the world it going on here it driving me nuts!! I am not good enough to go into the command prompt to do it,I don't know really how and not brave enough to try it. I just don't know about it. Could someone please let me know what is wrong? I have an Inspiron 531with Home Basic. Just the Basic computer.
View 5 Replies
View Related
May 5, 2008
Check disk will not run at startup. Runs in read only mode without a problem. Have tried sfc /scannow. Have replaced autochk file. Have tried from elevated prompt, drive c: properties, as well as in safe mode. Tried Vista x64.com tutorial methods.
Lenovo R61
T8300 duo processor
2 gb ram
100 gb, 7200 rpm hard drive
4gb readyboost
Windows Vista Business
SP 1 not installed.
View 9 Replies
View Related
May 15, 2010
About 6 months ago I ran a Check Disk of my C Drive (using the Vista Error Checking tool), and checked both boxes before starting (Auto fix file system errors and Scan for/attempt recovery of bad sectors).
It ran thru the 1st 5 of the 6 checks without finding an error.
On the 6th and final check it runs, it hung (or the 4th of the 5 checks it runs - can't remember if it's 5 or 6 it runs). . I believe it began the check, but stopped and didn't move any further. A few hours later it still hadn't moved, so I did a hard shutdown....
View 9 Replies
View Related
Mar 23, 2008
A couple of questions:
1) On xp I could always use Windows Key + F to find such files as Charmap.exe, or files supporting my sound card - that sort of thing. This doesn't apply in Vista. Is there an equivalent?
2) How common is it that a healthy computer with Vista installed will succumb to application malfunctions that can be rectified by Check Disk? My laptop was new 2 weeks ago and apparently the hardware is in good shape, but I've had to do a couple of check disks.
View 7 Replies
View Related
Mar 1, 2009
i am running a vista basic on my laptop, and it just recently did something called checkdisk, and it made it so i cant see any of my pictures, of change anything for personalization, like the backround. And the theme isnt vista, it is the old windows 2000 theme, and i cant change that. does anybody know what happened, or how i can fix this??
View 5 Replies
View Related
May 2, 2008
laptop runs vista but my desktop runs XP. I know this is a Visya community but can anyone tell me why all of a sudden everytime i am booting up on my XP desktop it says "a disk check has been scheduled, windows will now check disk" This process takes hours. how do I get my desktop to boot normally?
View 6 Replies
View Related
Jun 1, 2008
My laptop is newish. Maybe 2 months now. The model is Advent and I'm running Vista Home Premium. The checker wants to check the Vista drive for consistency. It want's to scan 3 stages. I only gets to the first stage and displayes someting along the lines of:
......
Deleted corrupt entry
Type code 128 File 19611
Deleting corrupt record
Segment 11459
Readable/writable file not re writable. And then does nothing after this. If this information is not enough I will re do the scan and take down everything displayed. But what can be the problem? I download nothing and scan it daily. I have touched no system files and have only had a small handful of crashes. Is this proble something somebody knows how to solve. This laptop was bought for me and I cannot afford to have it repaired.
View 9 Replies
View Related
Sep 28, 2009
last night i nearly cracked it with my computer because i did a CHKDSK and when that finishes and my computer restarts... when it just about to load the logon screen it is dark for at least up to a minute. the last time i did that i wouldn't boot into windows at all. and had to pay 60.00 for it to get looked at.
View 6 Replies
View Related
May 6, 2008
Disk check at boot : Is there a way to stop that darn thing from going off the screen after it is done ? Maybe there is nothing to report, but I'd like to see what
is on that black/white screen at the end. You know, just one time?
View 5 Replies
View Related
Apr 19, 2010
I'm trying to run check disk but when I run it, it takes way-way too long. After an hour it was still only on 13% done, ad it was there for about 45 minutes already. At this rate, it would take about a week to go throuhg the whole disk.
View 4 Replies
View Related
May 7, 2010
I'm new here, so I'll try not to screw up my post. I have Home Premium Vista, 64bit and 688GB hard drive(size when checking C: drive). I recently checked and it showed less than half full. Then a few days ago I tried saving a file and I got disk full message. I checked the c: drive again and it showed full- no space available, which should not be. I did a defrag, check disk and that did not work. I do remember seeing a warning around that time, but it vanished before I read it all. I think it said a file was not working or was corrupted and may have said something about "Catalyst". I found Catalyst Control Center on my computer, but that seems to be ATI card (graphics card?). I did delete a bunch of junk so it can now function, but latest check still shows only 72 MB available and that can't be.
View 9 Replies
View Related
Mar 8, 2010
I had a bad "driver install" and windows tried to do a fix/repair and in doing so it has "check disk" running at start up.I would like the "registry fix" to disable this.Upon checking the registry hkey local machinesystem it lists "controlset001" and "controlset003" which appear to list the exact same keys.Is this normal? My OS Vista Home Premium
View 5 Replies
View Related
Jul 29, 2009
I'm running Windows Vista Ultimate x64. My computer boots up fine gets to the windows splash screen then does chkdsk and freezes after checking drive C:. Restarting causes it to get to the Windows splash screen again and run chkdsk and freeze after checking C:. I cannot get out of this loop as my keyboard stops working at the Windows splash screen. Even using a PS2 keyboard has the same result. I have tried the following: Going into the vista repair setup thing running command prompt and typing chkntfs /x c: d: e: and then restarting. it still runs chkdsk it still freezes and I still cannot skip chkdsk. I sheduled these myself but did not expect them to freeze. I cannot stop them from checking and every time I let it run through it freezes.
View 9 Replies
View Related
Jan 9, 2008
Automatic backup worked fine until December 26 (daily). Since that date it has failed. T'he error code is as follows: Catastrophic Failure, 0x8000FFFF. Also, check disk will not work.
View 7 Replies
View Related
Apr 3, 2009
Is there any way to see that? Bored with continuous hard disk access light flashing and whirring sound
View 5 Replies
View Related
Jul 15, 2009
I have been playing around with my Vista for some days now. I patched my registry to account for custom visual styles and all. The computer responded fine to all these changes until today. I installed Desktop Maestro 3.0.0.830 which according to the internet is a decent registry cleaner and works with vista sp2.
What I learnt from the net is that desktop maestro will clean registry and will quicken my startup. So i ran it, and it came up with 937 problems in my registry. So the next thing i did was "Repair". and it did just that. But since then my computer hasn't been starting up at all. Before the login screen comes, i get a blue screen, which remains for too short a time for me to read, and reboots.
Turned the computer on in Safe Mode, which worked perfectly. Ran desktop maestro again, and restored the computer to a previous state. This didn't work. it kept saying C: has some errors please check. But the disk check doesnt work.......
View 9 Replies
View Related
Jul 29, 2009
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
View 9 Replies
View Related
Mar 26, 2008
Vista started giving a blue screen a couple of days ago. Mentioned something about a bad device, but no new devices have been added. Went through the typical steps, tried to boot in safe mode and got the following errors:
AtBroker.exe The application failed to initialize properly. Click OK.
Explorer.exe The application failed to initialize properly. Blue Screen
Then booted to my install dvd, tried to fix errors. Came back with a failed check at the file system integrity check. Ran the check a second time and no errors are found. Can't boot in safe mode, and when i try to repair errors I get no errors found.
View 6 Replies
View Related
Jun 3, 2008
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies
View Related
Jan 1, 2010
I located an old hard drive stored on a shelf the other day and connected it to my Vista machine with a USB dongle. I decided to defrag it (350Gb). Now, I already know that Vista's defrag provides NO indication of progress other than that pretty lame statement that "this may take a few minutes to a few hours". I've seen mention of other defraggers here in this NG and am wondering if any of them provide visual progress indications. Previous OS's used either marching colored blocks, or slowly moving vertical bands in a window. Vista's, on the other hand, simply does nothing to indicate progress. Do any of the others provide any performance boost (i.e. faster) as well as any indication of progress?
View 6 Replies
View Related
Apr 20, 2008
the title would be correct if it read: Ballmer says Vista is a 'crap in progress' read more crappy news about vista crap here
View 9 Replies
View Related
Aug 8, 2008
Since I use the x64 version of Vista, I am plagued with Quicktime's black bar, like everyone else out there on x64. I just find it ridiculous that after more than a year, this bug still remains. Makes me wonder if they may have even purposely put it there because I'm sure they aren't making any effort in fixing it. The only way that I know of to be able to see the bar is by running the browser in compatibility mode for Windows XP. I would do that, but the problem is that Vista then changes the Aero to Basic until the browser is closed. So you either:
1. Live with the black Quicktime progress bar.
2. Run the browser in compatibility mode and live with a changing theme (and if you already use the Basic theme by default, you're lucky)
Now, I know there's a program called Quicktime Alternative(QA) that basically provides the core functions of Quicktime, while letting you watch most anything that's in a Quicktime format through Media Player Classic. Question is, since I have to uninstall the original Quicktime to use QA, would it affect my iTunes? Do you guys know if QA can also do Quicktime's virtual tours and 360* views?
I also have the Vista Codecs installed, and for those of you that don't know, there's a Quicktime codec in there. While I get a better balance of colors in WMP than in Quicktime, the volume of the audio is too loud and distorts (not distorts the speakers, but the audio itself). So I don't know what else I can do... I am open to anything that doesn't involve changing themes or black bars...
View 9 Replies
View Related
Jul 7, 2008
Is there a way to perform an analysis of the fragmentation level of a drive in Vista Home Premium? I miss being able to see a graphic representation of a disk's fragmentation. Also, previous versions of Windows provided the user a progress bar than informed them of the status of the defrag program when it was running. It appears that Home Premium runs in the background and one never gets a "defragmentation complete" dialog box with options to see a report. I've tried running it manually and not closing the Run dialog box, but it seems to run for hours without any feedback to the user.
View 9 Replies
View Related
Sep 30, 2008
I have Windows Vista Home Premium 64bit. When I try to install almost anything, I get an error that says there is another installation in progress, finish that install and then install this program. The problem is I don't have anything at all installing. I have disabled and restarted Windows Installer and I have disabled a filed named hpqcxs08 under the Services tabs. That worked for a couple of installs, but now it has started again. I then tried to install msicuu2.exe (Windows Cleanup Utility) and it gave the same error and called it Error 1500.
View 6 Replies
View Related
Sep 3, 2008
why there is no defrag progress graph in vista (like the one there was in xp). The defrag just has a scheduler or defrag now and then there is no way of knowing how far along it is. Any thoughts would be welcome.
View 4 Replies
View Related
Mar 19, 2009
The final build of Internet Explorer 8 has been released in 25 languages. You can also grab the download directly from these links: Windows XP 32-bit (16.1 MB), Windows XP 64-bit (32.3 MB), Windows Server 2003 32-bit (16.0 MB), Windows Server 2003 64-bit (32.3 MB), Windows Vista 32-bit (13.2 MB), Windows Vista 64-bit (24.3 MB), Windows Server 2008 32-bit (13.2 MB), and Windows Server 2008 64-bit (24.3 MB).
The public Windows 7 beta is not being updated, and although Microsoft released an update for IE8 for Windows 7 in February, the next update is not likely to arrive until the Windows 7 Release Candidate next month. For everyone else, in the coming weeks Microsoft will put IE8 out as an optional download on Windows Update and then later roll it out to users via Automatic Updates. A quick note to all the IT administrators out there reading this post: the IE8 blocker toolkit is already available, so make sure you get acquainted with it if you're planning on avoiding IE8 when it's released via Microsoft's update channels.
View 9 Replies
View Related
Mar 10, 2009
I have an odd situation on network copying from my Vista X64 Ultimate PC to a Windows XP Pro PC. I suspect it is something I have altered in the settings / registry whilst I was trying to overcome network copy problems. I am using Directory Opus 9.1 as my file explorer but I don't think this is the problem.
When I copy a large file (say 1.0GB) then the copy progress bar quickly goes to 100% and then remains at 100% for a period of time before completing. If I look in the Performance tab of the Task Manager I can see memory use quickly increase by 1.0GB and then slowly start to reduce. The peak is achieved at about the same same as the 100% is shown and the progress bar remains stuck at 100% whilst the memory reduces (presumably as the file is copied over the network).
I suspect I must have set a cache figure at 1.0GB because if I copy a larger file then the memory increases and then flat lines for a period and then start reducing. In this case the progress bar will speed up to say 60% and then track slowly to 100% and then get stuck whilst the memory reduces. I am up-to-date will all MS Updates
View 6 Replies
View Related
