Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replieslaptop runs vista but my desktop runs XP. I know this is a Visya community but can anyone tell me why all of a sudden everytime i am booting up on my XP desktop it says "a disk check has been scheduled, windows will now check disk" This process takes hours. how do I get my desktop to boot normally?
View 6 Replies View RelatedDisk check at boot : Is there a way to stop that darn thing from going off the screen after it is done ? Maybe there is nothing to report, but I'd like to see what
is on that black/white screen at the end. You know, just one time?
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies View Relatedhp tool ask to do this "Then please go to “using DOS system files” column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies View RelatedThis Acer desktop wants to do a file check every time it is booted, even though it is always shut down correctly.
View 5 Replies View RelatedI went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
i installed vista home up from XP but it takes a good 5 mins to boot up.
View 5 Replies View Relatedinstalled SP1. Used to take 10 minutes to boot and another 1-2 to log in. Now it's 15 min to boot and at least 8 minutes to log in. Launching any program is coffee trip time, if I brew a new pot sometimes Vista is ready when I get back. Nice. Attta boy M$, way to bork it up again core 2 duo 2ghz, 4GB of ram (top of the line HP notebook) Fresh install of the OS (drive barfed)
View 4 Replies View RelatedI used to be able to boot up in no time. The microsoft vista "lightbar" used to scroll left to right about 5 times. Now, it scrolls 43 times.
I did the Visual basic test that I found here and my boot up time is 155 seconds. I do know part of my problem is my antivirus but looking around I found more problems.I have major bootup errors in the event log.
I tried everything in here: Boot Up And I still have a slow startup: 30-40 seconds just on the Windows loading bar. When I first installed Vista it was not like this. I tried to figure out what was causing this so I downloaded xperf and did a xbootmgr trace.
View 9 Replies View RelatedI have all the latest windows updates installed, including Service Pack 2. I also have latest BIOS installed. I have already configured msconfig for start up applications and services. But, still my computer boots very slowly. Right now it takes about 1 minute and 20 seconds to boot up.
View 9 Replies View RelatedCan a slow boot up of an Acer Aspire 4710 laptop is caused by a not updated BIOS software? The laptop has a Core 2 duo processor and Windows Vista Home Basic.
View 7 Replies View RelatedA rough timeline:Turn on PC, 18 seconds - bios screen flashes up for a split second (this hasn't always happened), follwed by "checking nv ram" followed by a screen that shows the two CD drives (why?)- black- 34 seconds - vista loading bar. 46 seconds - black 1.53 (!!!!!) - Windows icon appears. 1.56 - login ready
On fresh install (week or so ago) it was fine, then there were 48 updates to install...since then it's been slow. I've ensured HDD is first boot device, i've defragged the HDD, even tried RC1 of SP1, but that just seemed to make it crash so i've since uninstalled it - made no difference to my boot time.
my Vista booted with scrolling the green thingy about 7 times. Yesterday, all of a sudden, it started to boot with scrolling it about 20-25 times. I tried to turn off some programs to load with Windows (Steam, Adobe and iTunes). Also turned some services off/put to Manual (like Printer Spooler, iTunes Helper and so on), but that didn't help. When I installed Windows I found out that disabling service named Server made the boot time that short and it's still disabled. what might slow down the boot up process? I guess something related to network and networking services but I'm not sure.
View 6 Replies View RelatedI bought a PC with Windows Vista Home Premium, 32bit, Norton McAfee AV included.
Specs: Intel Core 2 Quad Q9300 2.5 GHz, 4 GB Ram, Videocard: Nvidia Geforce 9600 GT.
First time I started it up It worked fine. Then I installed some programs (two games, a DVD media player, MSN Messenger).
The first few times I restarted the PC it was fine, but then after Windows Vista installed the Updates it rebooted and now it reboots EXTREMELY slow. And this on the first day!
It takes at least 10 minutes at the Bios-Screen and then when it is done there it slowly (another 5 min at least) to start windows.
After start-up everything works fine.
What should I do? Did I do something wrong during an install?
I neve had such problems with XP, although removing McAfee AV really quickened the start up (not the initial Bios Booting though) whern I had XP.
I've tried all the common fixes posted around the net. I get a two minute boot in safe mode and in reg mode with nothing in the startup. I feel that after looking at the bootlog file that it has something to do with drivers that don't load during the boot. According to the log I have dozens and dozens of drivers that apparently don't load. Here is a sample of the log. I don't enclose the whole log because it is very large. I will if necessary:
Code:
Loaded driver SystemRootsystem32DRIVERSsnapman.sys
Loaded driver SystemRootSystem32Driversmup.sys
Loaded driver SystemRootSystem32driversecache.sys
Loaded driver SystemRootSystem32DRIVERSfvevol.sys
Loaded driver SystemRootsystem32driversdisk.sys
Loaded driver SystemRootsystem32driversCLASSPNP.SYS
Loaded driver SystemRootsystem32driverscrcdisk.sys
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%tunmp.displayname%;Microsoft Tun Miniport Adapter
Did not load driver @hal.inf,%acpiapic.devicedesc%;ACPI x86-based PC.......................
It takes about 2 minutes to boot to all my startup programs. However, for the next 10 to 15 minuts the hard drive is running continuously. If I try to run another app., e.g. Outlook, it will freeze and the "Not Responding" notation appears at the top of the screen. I've tried to nail down what might be hogging the hard drive (using reliability and performance monitor) but can't identify any single program. I have 50 gigs free space, 2 GB RAM. I defrag once a week and clean up temp files and cashes once a day. It seems all proposed solutions I've run across lead me to one of the registry cleanup programs. I run Reg. Clean & Wise Registry Cleaner once a week. Real time monitoring by McCafee and Windows Defender. I have run both AD Aware and Spy Bot frequently.
View 8 Replies View Relatedi recently formatted and reinstalled windows on my computer and for some reason i have had nothing but trouble since. a run down of my problems, i had 4gb of ram now she will only run on 2gb, she used to be really fast at booting up and shuting down and now i can flick her on and have my breakfast before she has even thought about doing anything. I had a nosey in the event logger and amongst the hundred of errors daily, the one mark BOOT ERROR, is this one.
no viruses, hard drives are defragged and check disked. for the record when she is on she is fine, no problems, just booting up and shutting down it starts playing up
Windows has started up:.............
I have a notebook with Windows Vista Home Premium 64-bit on it. The problem is that my boot is take a lot of time. First I get the BIOS screen with the Dell logo that is taking about 3 seconds (so that is good). But the loading bar is taking a lot of time. It is going from left to right for 13 times (This is not normal I think). After that, my screen is going blank for about 10 seconds and then I get a black screen with mouse cursor for about 10 seconds and then again a blank screen for 10 seconds (So a total of 30 seconds, which also not normal). After that I get the vista logo with the sound and the welcome screen, which is taking a long time (for about 25 seconds).
After that I get a blank screen for 20 seconds and then the desktop appears and from now on everything is running fine. So my question is: WHAT is causing this slow boot! I have already read the tutorial 'How to Speed Up Vista Boot Time' and did everyting they said. My startup programs are Kaspersky Internet Security and MSN Messenger. I have enabled superfetch and prefetch and set the registry value on 3. What else can I do to decrease the boot time?
For the last few days my 'pc' (http://www.vistax64.com/) takes three and half minutes to load. I did have the windows update KB954430 installed around that time. All malware and virus scans come up clean. Could this update be the problem? It takes 90 sec. to get to the welcome screen, then the screen goes black untill the programs begin to load at 195 seconds. the loading of programs seems to be in a normal time frame.
View 4 Replies View RelatedMy computer has Vista Home Premium installed but about a couple of weeks ago my computer started to boot up slow (taking about 10 minutes). I couldn't figure out the problem and neither could anybody else so I am going to re-install vista.Is it possible to re-install vista without losing any personal or program data?
View 4 Replies View RelatedI've recently put together a new computer using these parts: I've updated to Vista Ultimate SP1, run multiple disk clean ups, defrags, use CCleaner, clean the registry, defrag the registry, disabled services and have made tweaks according to the guide provided on this website and have minimal startup programs running but my boot times average around 2 minutes. For a new computer with new hardware, this seems unreasonable as many users report boot times between 30-60 seconds. What could be wrong with my computer? On the vista loading screen with the green bar, it goes through about 22 cycles.
View 5 Replies View RelatedI changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......
Specs: HP Pavillion m8100 n.
System: 32 bit
OS: Windows Vista Home Premium
AMD Athlon 64x2 Dual Core Processor 5600*
Welll I have an HP Pavillion m8100n TV PC and a couple of months ago the computer froze and I restarted it but it gave me an error saying there was a boot disk error and I had no idea what to do about itI recovered the computer but a week later same results and now I tried to install Home Premium again and it's giving me errors like:
DRIVE_IRQL_NOT_LESS_OR_EQUAL, and I have NOOO idea, what it means..and at the bottom with techincal information it says: *** STOP: 0X000000D1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xFFFFFA60012FC23E)
*nvstor.sys - Address FFFFFA60012FC23E base at FFFFFA60012F6000, DateStamp 46671a38, and I have no idea what to do. And when I tried installing Vista it worked the first time...for like one day than it get all those errors I just mentioned..and in addition to all those bad problems, my recovery partition of the computer was deleted.
All you usually hear is that Vista is horrible to work with but seems like people here figured it out, so thanks A year ago when i built my new computer and decided to get Vista, I went to BestBuy and they gave me what I thought i needed. Turns out it was an upgrade version of Vista Ultimate and I ended up having to use my old IDE HDD ever since. I'm wondering if there's a way to change so that Vista can load off of my SATA HDD.
View 4 Replies View RelatedJust finished building my new workstation....1x 250GB SATA drive on wich I want to install Vista Ultimate x64. 3x 500GB SATA drive wich i'd like to have running in Raid-5.
Asus P5E motherboard.
My first take was this:
1) connect all HDD's
2) Install vista on 250GB drive, leave 500GB drives alone for now.
3) Update Vista.
4) Restart, enable RAID in BIOS.
5) Ctrl+I at startup, setup RAID-5 with the 3 500GB HDD's in RAIDmanager. So far so good..... RAID manager shows RAID-5 correctly and shows that 250GB drive isnon-raid.
6) Reset, problem: no startup *"No bootbable drives found"* In BIOS, it shows all drives under boot devices, and the 250GB drive asthe first boot disk.But before the 250GB name it sais RAID also, wich I guess it shouldnot.......
I recently purchased a new Dell with Vista 32 Home Premium (OEM). I would really like to try out 64bit Home Premim. If I purchased a 64bit OEM disk could I install it on a partition on Drive C and still retain a fully functional 32bit Vista.
Note : My system has 2 x 640 gb Sata Drives, but the way it has been configured, in windows explorer I see only a c: drive (1.15Tb) and a d: drive which is only 10gb, this is a recovery drive.
how can i create a diskpart boot cd or usb? Or where to download the image or progs to make such an image?
View 5 Replies View RelatedThe only way I am able to boot his with a political CD/DVD in the drive, wait for the "press any key to boot from CD or DVD" prompt comes up, do not hit any key whatsoever and then the normal user prompt/enter password screen comes up. Additionally if I try to "Safe Mode Boot" I Blue Screen.
View 5 Replies View RelatedI've never really had any problems with my computer acting up. I decided to add 2GB more RAM to my system this morning. Once I finally got them in there after much prodding and force I turned on my machine only to get this dreaded error message. I made sure the cords were still connected to the hard drive. I then took the RAM that I had just added back out but the error message still persists unfortunately. I'm wondering if anyone might have a suggestion as to other techniques I can try to get my system working again. I am currently running Vista Home Premium 32bit.
View 4 Replies View Related